arXiv subjects

T. Schmidt

Publications and source records attributed to T. Schmidt.

At least 19 recordsLinked to original sources

arXiv2026

The Array Control and Data Acquisition software of the Cherenkov Telescope Array Observatory

The Cherenkov Telescope Array Observatory (CTAO) aims to advance knowledge of the gamma-ray sky as the largest gamma-ray observatory ever built. The CTAO will be deployed at two sites, one in the Northern Hemisphere and the other in the Southern Hemisphere, containing telescopes of three sizes to cover different energy domains. Commissioning of the prototype CTAO Large-Sized Telescope (LST-1) is being finalized at the northern site, while three additional LSTs are under construction. Additional calibration and environmental monitoring instruments, such as laser imaging detection and ranging (LIDAR) systems and weather stations, will support telescope operations. The Array Control and Data Acquisition (ACADA) system serves as the central element for on-site CTAO operations. ACADA controls, supervises, and handles the data generated by the telescopes and the auxiliary instruments. It drives the efficient planning and execution of observations while managing the multi-gigabit-per-second data streams produced by each CTAO telescope. The ACADA system contains the CTAO Science Alert Generation Pipeline - a real-time data processing and analysis pipeline, dedicated to automatically generating science alert candidates as data are acquired. These science alerts, along with external alerts received from other scientific instruments, are managed by the Transients Handler (TH) component. The TH informs ACADA's Short-Term Scheduler (STS) about relevant science alerts, enabling modification of ongoing observations on sub-minute timescales. This capability for rapid response, combined with the fast slewing of CTAO telescopes, makes the Observatory an excellent instrument for studying high-impact astronomical transients.

astro-ph.IM↗

arXiv2026

The SPHERE infrared survey for exoplanets (SHINE) V. Full sample characterization

Unbiased surveys of large stellar samples are the prime means through which the prevalence of exoplanets can be derived, and crucial constraints to planet formation models can be set. Direct imaging (DI) is ideally positioned to probe the outer regions (5-300au) of planetary systems, providing complementary information to techniques such as transits and radial velocities. We present the full sample of the SpHere INfrared survey for Exoplanets (SHINE), the second largest DI campaign to date. SHINE observed 460 stars between 2015 and 2023 thanks to the guaranteed time observations (GTO) allocated by ESO to the SPHERE consortium at VLT. The goal of this paper is to homogeneously derive the stellar properties of the targets and to define a subsample of young single hosts to be used as a starting point for the final statistical analysis of the survey. Stellar ages were determined based on kinematic indicators (such as the membership to young moving groups), age diagnostics (lithium abundance, rotation, activity), and isochrone fitting. A thorough vetting for binarity was undertaken combining astrometric, spectroscopic, and imaging data. A subsample of 333 stars, covering a large extent of stellar ages and masses, was constructed. Selection criteria, global features, as well as the properties of individual stars are reported and discussed.

astro-ph.EP↗

arXiv2025

Characterization of debris disks observed with SPHERE

This study aims to characterize debris disks observed with SPHERE across multiple programs, with the goal of identifying systematic trends in disk morphology, dust mass, and grain properties as a function of stellar parameters. We analyzed a sample of 161 young stars using SPHERE observations at optical and near-IR wavelengths. Disk geometries were derived from ellipse fitting and model grids, while dust mass and properties were constrained by modified blackbody (MBB) and size distribution (SD) modeling of SEDs. The dynamical modeling was performed to assess whether the observed disk structures can be explained by the presence of unseen planets. We resolved 51 debris disks, including four new detections: HD 36968, BD-20 951, and the inner belts of HR 8799 and HD 36546. In addition, we found a second transiting giant planet in the HD 114082 system, with a radius of 1.29 $R_{\rm Jup}$ and an orbital distance of ~1 au. We identified nine multi-belt systems, with outer-to-inner belt radius ratios of $1.5-2$, and found close agreement between scattered-light and millimeter-continuum belt radii. They scale weakly with stellar luminosity ($R_{\rm belt} \propto L_{\star}^{0.11}$), but show steeper dependencies when separated by CO and CO$_2$ freeze-out regimes. Disk fractional luminosities follow collisional decay trends, declining as $t_{\rm age}^{-1.18}$ for A and $t_{\rm age}^{-0.81}$ for F stars. The inferred dust masses span $10^{-5}-1\,M_\oplus$ from MBB and $0.01-1\,M_\oplus$ from SD modeling. These masses scale as $R_{\rm belt}^n$ with $n>2$ in belt radius and super-linearly with stellar mass, consistent with trends seen in protoplanetary disks. Analysing correlation between disk polarized flux and IR excess, we found an offset of ~1 dex between total-intensity (HST) and polarized fluxes. A new parametric approach to estimate dust albedo and maximum polarization fraction is introduced.

astro-ph.EP↗

arXiv2025

Semi-analytical Approach to Trajectory Optimization for Stacker Cranes Regarding Energy Saving

The aim of this study is to give insights into the trajectory optimization w.r.t. energy consumption and recuperation for stacker cranes in a high-bay warehouse. Based on an analytical necessary optimality condition, a targeted numerical implementation is set up to perform systematic computations of optimal trajectories which are further categorized. Particularly, the differences between energy consumption and recuperation as well as for up and down movements are pointed out. Although examined for a concrete, experimentally validated model of stacker cranes, the methodical approach could be adapted to other electrical machines possessing a power flow model, i.e. a functional relation between the kinematics (velocity, acceleration for instance) and the resultant power. In addition, boundaries of the velocity, the acceleration and the jerk are incorporated. Such a systematic analysis of energy optimal trajectories can be further used for improving the job scheduling in a warehouse.

math.OC↗

arXiv2025

A systematic bias in template-based RV extraction algorithms

In this paper we identify and explore a previously unidentified, multi meter-per-second, systematic correlation between time and RVs inferred through TM and LBL methods. We evaluate the influence of the data-driven stellar template in the RV bias and hypothesize on the possible sources of this effect. We first use the s-BART pipeline to extract RVs from three different datasets gathered over four nights of ESPRESSO and HARPS observations. Then, we demonstrate that the effect can be recovered on a larger sample of 19 targets, totaling 4124 ESPRESSO observations spread throughout 38 nights. We also showcase the presence of the bias in RVs extracted with the SERVAL and ARVE pipelines. Lastly, we explore the construction of the stellar template through the 5 years of ESPRESSO observations of HD10700, totalling more than 2000 observations. We find that a systematic quasi-linear bias affects the RV extraction with slopes that vary from -0.3 m/s-1/h-1 to -52 m/s-1/h-1 in our sample. This trend is not observed in CCF RVs and appears when all observations of a given star are collected within a short time-period (timescales of hours). We show that this systematic contamination exists in the RV time-series of two different template-matching pipelines, one line-by-line pipeline, and that it is agnostic to the spectrograph. We also find that this effect is connected with the construction of the stellar template, as we are able to mitigate it through a careful selection of the observations used to construct it. Our results suggest that a contamination of micro-telluric features, coupled other sources of correlated noise, could be the driving factor of this effect. We also show that this effect does not impact the usual usage of template-matching for the detection and characterization of exoplanets. Other short-timescale science cases can however be severely affected.

astro-ph.EP↗

arXiv2025

Disk Evolution Study Through Imaging of Nearby Young Stars (DESTINYS): Evidence of planet-disk interaction in the 2MASSJ16120668-3010270 system

The architectures of exoplanet systems are likely set during the initial planet-formation phase in the circumstellar disk. To understand this process, we have to study the earliest phases of planet formation. Complex sub-structures, believed to be driven by embedded planets, have been detected in a significant portion of disks observed at high angular resolution. We aim to extend the sample of such disks to low stellar masses and to connect the disk morphology to the expected proto-planet properties. We resolve the disk in the 2MASSJ16120668-3010270 system for the first time in scattered near-infrared light on scales of 10 au using VLT/SPHERE and reveal an exceptionally structured disk. We find an inner disk (inside 40 au) with two spiral arms, separated by a gap from an outer ring. By comparison with hydrodynamic models, we find that these structures are consistent with the presence of an embedded gas giant with a mass range between 0.1 and 5 MJup depending on the employed model. Our SPHERE observations find a tentative candidate point source within the disk gap, which may be consistent with this mass range if it indeed traces thermal emission by an embedded planet. This interpretation is somewhat strengthened by the proximity of this signal to compact mm continuum emission in the disk gap, which may trace circumplanetary material. It is, however, unclear if this tentative companion candidate could be responsible for the observed disk gap size, given its close proximity to the inner disk. The 2MASSJ16120668-3010270 system is one of only a few systems that shows this exceptional morphology of spiral arms located inside a scattered light gap and ring. We speculate that this may have to do with a higher disk viscosity compared with other systems such as PDS 70.

astro-ph.EP↗

arXiv2025

TDCOSMO: XX. WFI2033--4723, the First Quadruply-Imaged Quasar Modeled with JWST Imaging

Gravitational time delays offer unique, independent measurements of the Hubble constant, $H_0$. Precise measurements of $H_0$ stand as one of the most pressing challenges in modern cosmology, and to do so with time delays requires precise lens models. While much work has focused on streamlining the modeling process to keep pace with the erumpent discovery of strongly-lensed systems, a critical step toward reducing uncertainty in $H_0$ comes from increasing the precision of individual lens models themselves. In this work, we demonstrate that the unprecedented imaging capabilities of JWST make this goal attainable. We present the first lens model for time-delay cosmography derived from JWST data, applied to the quadruply-imaged quasar WFI2033--4723. While the primary source of systematic uncertainty in time-delay cosmography is currently the mass-sheet degeneracy (MSD), the sensitivity of models to this MSD varies on how the point spread function (PSF) errors are mitigated. As the PSF is also the primary source of uncertainty in lens modeling, we focus on a comparison of different PSF modeling methods. Within the context of power-law models, we recover results in agreement with previous Hubble Space Telescope (HST)-based models, but with better precision of key lensing parameters through implementation of new PSF modeling techniques. Despite the record-holding precision of this system's HST modeling, we achieve an additional 22% increase in precision of the Fermat potential difference, directly reducing uncertainties of cosmological inference. These results would produce a 3% ($1\sigma$ of the modeling error) shift of $H_0$ towards a higher value for this lens, keeping all else constant. This work substantiates the groundbreaking potential of JWST for time-delay cosmography and lays the groundwork for modeling systems previously too faint to provide meaningful constraints on $H_0$.

astro-ph.CO↗

arXiv2025

The SPHERE infrared survey for exoplanets (SHINE). V. Complete observations, data reduction and analysis, detection performances, and final results

During the past decade, state-of-the-art planet-finder instruments like SPHERE@VLT, coupling coronagraphic devices and extreme adaptive optics systems, unveiled, thanks to large surveys, around 20 planetary mass companions at semi-major axis greater than 10 astronomical units. Direct imaging being the only detection technique to be able to probe this outer region of planetary systems, the SPHERE infrared survey for exoplanets (SHINE) was designed and conducted from 2015 to 2021 to study the demographics of such young gas giant planets around 400 young nearby solar-type stars. In this paper, we present the observing strategy, the data quality, and the point sources analysis of the full SHINE statistical sample as well as snapSHINE. Both surveys used the SPHERE@VLT instrument with the IRDIS dual band imager in conjunction with the integral field spectrograph IFS and the angular differential imaging observing technique. All SHINE data (650 datasets), corresponding to 400 stars, including the targets of the F150 survey, are processed in a uniform manner with an advanced post-processing algorithm called PACO ASDI. An emphasis is put on the classification and identification of the most promising candidate companions. Compared to the previous early analysis SHINE F150, the use of advanced post-processing techniques significantly improved by one or 2 magnitudes (x3-x6) the contrast detection limits, which will allow us to put even tighter constraints on the radial distribution of young gas giants. This increased sensitivity directly places SHINE as the largest and deepest direct imaging survey ever conducted. We detected and classified more than 3500 physical sources. One additional substellar companion has been confirmed during the second phase of the survey (HIP 74865 B), and several new promising candidate companions are awaiting second epoch confirmations.

astro-ph.EP↗

arXiv2024

J1721+8842: The first Einstein zig-zag lens

We report the discovery of the first example of an Einstein zig-zag lens, an extremely rare lensing configuration. In this system, J1721+8842, six images of the same background quasar are formed by two intervening galaxies, one at redshift $z_1 = 0.184$ and a second one at $z_2 = 1.885$. Two out of the six multiple images are deflected in opposite directions as they pass the first lens galaxy on one side, and the second on the other side -- the optical paths forming zig-zags between the two deflectors. In this letter, we demonstrate that J1721+8842, previously thought to be a lensed dual quasar, is in fact a compound lens with the more distant lens galaxy also being distorted as an arc by the foreground galaxy. Evidence supporting this unusual lensing scenario includes: 1- identical light curves in all six lensed quasar images obtained from two years of monitoring at the Nordic Optical Telescope; 2- detection of the additional deflector at redshift $z_2 = 1.885$ in JWST/NIRSpec IFU data; and 3- a multiple-plane lens model reproducing the observed image positions. This unique configuration offers the opportunity to combine two major lensing cosmological probes: time-delay cosmography and dual source-plane lensing since J1721+8842 features multiple lensed sources forming two distinct Einstein radii of different sizes, one of which being a variable quasar. We expect tight constraints on the Hubble constant and the equation of state of dark energy by combining these two probes on the same system. The $z_2 = 1.885$ deflector, a quiescent galaxy, is also the highest-redshift strong galaxy-scale lens with a spectroscopic redshift measurement.

astro-ph.CO↗

arXiv2022

Revisiting the atmosphere of the exoplanet 51 Eridani b with VLT/SPHERE

[Full abstract in the paper] We aim to better constrain the atmospheric properties of the directly imaged exoplanet 51~Eri~b by using a retrieval approach on higher signal-to-noise data than previously reported. In this context, we also compare the results of using the atmospheric retrieval code \texttt{petitRADTRANS} vs a self-consistent model to fit atmospheric parameters. We present a higher signal-to-noise $YH$ spectrum of the planet and revised $K1K2$ photometry (M$_{K1} = 15.11 \pm 0.04$ mag, M$_{K2} = 17.11 \pm 0.38$ mag). The best-fit parameters obtained using an atmospheric retrieval differ from previous results using self-consistent models. In general, we find that our solutions tend towards cloud-free atmospheres (e.g. log $\tau_{\rm clouds} = -5.20 \pm 1.44$). For our ``nominal'' model with new data, we find a lower metallicity ([Fe/H] $= 0.26\pm$0.30 dex) and C/O ratio ($0.38\pm0.09$), and a slightly higher effective temperature (T$_{\rm{eff}} = 807\pm$45 K) than previous studies. The surface gravity (log $g = 4.05\pm0.37$) is in agreement with the reported values in the literature within uncertainties. We estimate the mass of the planet to be between 2 and 4 M$_{\rm{Jup}}$. When comparing with self-consistent models, we encounter a known correlation between the presence of clouds and the shape of the $P-T$ profiles. Our findings support the idea that results from atmospheric retrievals should not be discussed in isolation, but rather along with self-consistent temperature structures obtained using the retrieval's best-fit parameters.

astro-ph.EP↗

arXiv2022

The high-albedo, low polarization disk around HD 114082 harbouring a Jupiter-sized transiting planet

We present new optical and near-IR images of debris disk around the F-type star HD 114082. We obtained direct imaging observations and analysed the TESS photometric time series data of this target with a goal to search for planetary companions and to characterise the morphology of the debris disk and the scattering properties of dust particles. HD 114082 was observed with the VLT/SPHERE instrument: the IRDIS camera in the K band together with the IFS in the Y, J and H band using the ADI technique as well as IRDIS in the H band and ZIMPOL in the I_PRIME band using the PDI technique. The scattered light images were fitted with a 3D model for single scattering in an optically thin dust disk. We performed aperture photometry in order to derive the scattering and polarized phase functions, polarization fraction and spectral scattering albedo for the dust particles in the disk. This method was also used to obtain the reflectance spectrum of the disk to retrieve the disk color and study the dust reflectivity in comparison to the debris disk HD 117214. We also performed the modeling of the HD 114082 light curve measured by TESS using the models for planet transit and stellar activity to put constraints on radius of the detected planet and its orbit. The debris disk appears as an axisymmetric debris belt with a radius of ~0.37$"$ (35 au), inclination of ~83$^\circ$ and a wide inner cavity. Dust particles in HD 114082 have a maximum polarization fraction of ~17% and a high reflectivity which results in a spectral scattering albedo of 0.65. The analysis of TESS photometric data reveals a transiting planetary companion to HD 114082 with a radius of $\sim$1~$\rm R_{J}$ on an orbit with a semi-major axis of $0.7 \pm 0.4$ au. Combining different data, we reach deep sensitivity limits in terms of companion masses down to ~5$M_{\rm Jup}$ at 50 au, and ~10 $M_{\rm Jup}$ at 30 au from the central star.

astro-ph.EP↗

arXiv2022

First wide field-of-view X-ray observations by a lobster eye focusing telescope in orbit

As a novel X-ray focusing technology, lobster eye micro-pore optics (MPO) feature both a wide observing field of view and true imaging capability, promising sky monitoring with significantly improved sensitivity and spatial resolution in soft X-rays. Since first proposed by Angel (1979), the optics have been extensively studied, developed and trialed over the past decades. In this Letter, we report on the first-light results from a flight experiment of the Lobster Eye Imager for Astronomy ($LEIA$), a pathfinder of the wide-field X-ray telescope of the Einstein Probe mission. The piggyback imager, launched in July 2022, has a mostly un-vignetted field of view of $18.6^\circ \times 18.6^\circ $. Its spatial resolution is in the range of 4$-$7 arcmin in FWHM and the focal spot effective area is 2$-$3 cm$^2$, both showing only mild fluctuations across the field of view. We present images of the Galactic center region, Sco X-1 and the diffuse Cygnus Loop nebular taken in snapshot observations over 0.5$-$4 keV. These are truly wide-field X-ray images of celestial bodies observed, for the first time, by a focusing imaging telescope. Initial analyses of the in-flight data show excellent agreement between the observed images and the on-ground calibration and simulations. The instrument and its characterization are briefly described, as well as the flight experiment. The results provide a solid basis for the development of the present and proposed wide-field X-ray missions using lobster eye MPO.

astro-ph.HE↗

arXiv2022

TDCOSMO X. Automated Modeling of 9 Strongly Lensed Quasars and Comparison Between Lens Modeling Software

To use strong gravitational lenses as an astrophysical or cosmological probe, models of their mass distributions are often needed. We present a new, time-efficient automation code for uniform modeling of strongly lensed quasars with GLEE, a lens modeling software, for high-resolution multi-band data. By using the observed positions of the lensed quasars and the spatially extended surface brightness distribution of the lensed quasar host galaxy, we obtain a model of the mass distribution of the lens galaxy. We apply this uniform modeling pipeline to a sample of nine strongly lensed quasars with HST WFC 3 images. The models show in most cases well reconstructed light components and a good alignment between mass and light centroids. We find that the automated modeling code significantly reduces the user input time during the modeling process. The preparation time of required input files is reduced significantly. This automated modeling pipeline can efficiently produce uniform models of extensive lens system samples which can be used for further cosmological analysis. A blind test through a comparison with the results of an independent automated modeling pipeline based on the modeling software Lenstronomy reveals important lessons. Quantities such as Einstein radius, astrometry, mass flattening and position angle are generally robustly determined. Other quantities depend crucially on the quality of the data and the accuracy of the PSF reconstruction. Better data and/or more detailed analysis will be necessary to elevate our automated models to cosmography grade. Nevertheless, our pipeline enables the quick selection of lenses for follow-up monitoring and further modeling, significantly speeding up the construction of cosmography-grade models. This is an important step forward to take advantage of the orders of magnitude increase in the number of lenses expected in the coming decade.

astro-ph.CO↗

arXiv2022

Orbital and dynamical analysis of the system around HR 8799. New astrometric epochs from VLT/SPHERE and LBT/LUCI

HR\,8799 is a young planetary system composed of 4 planets and a double debris belt. Being the first multi-planetary system discovered with the direct imaging technique, it has been observed extensively since 1998. This wide baseline of astrometric measurements, counting over 50 observations in 20 years, permits a detailed orbital and dynamical analysis of the system. To explore the orbital parameters of the planets, their dynamical history, and the planet-to-disk interaction, we made follow-up observations of the system during the VLT/SPHERE GTO program. We obtained 21 observations, most of them in favorable conditions. In addition, we observed HR\,8799 with the instrument LBT/LUCI. All the observations were reduced with state-of-the-art algorithms implemented to apply the spectral and angular differential imaging method. We re-reduced the SPHERE data obtained during the commissioning of the instrument and in 3 open-time programs to have homogeneous astrometry. The precise position of the 4 planets with respect to the host star was calculated by exploiting the fake negative companions method. To improve the orbital fitting, we also took into account all of the astrometric data available in the literature. From the photometric measurements obtained in different wavelengths, we estimated the planets' masses following the evolutionary models. We obtained updated parameters for the orbits with the assumption of coplanarity, relatively small eccentricities, and periods very close to the 2:1 resonance. We also refined the dynamical mass of each planet and the parallax of the system (24.49 $\pm$ 0.07 mas). We also conducted detailed $N$-body simulations indicating possible positions of a~putative fifth innermost planet with a mass below the present detection limits of $\simeq 3$~\MJup.

astro-ph.EP↗

arXiv2022

First light of BEaTriX, the new testing facility for the modular X-ray optics of the ATHENA mission

The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHENA), based on silicon pore optics (SPO) technology, for verification before integration into the mirror assembly. To this end, BEaTriX generates a broad, uniform, monochromatic, and collimated X-ray beam at 4.51 keV. [...] In BEaTriX, a micro-focus X-ray source with a titanium anode is placed in the focus of a paraboloidal mirror, which generates a parallel beam. A crystal monochromator selects the 4.51 keV line, which is expanded to the final size by a crystal asymmetrically cut with respect to the crystalline planes. [...] After characterization, the BEaTriX beam has the nominal dimensions of 170 mm x 60 mm, with a vertical divergence of 1.65 arcsec and a horizontal divergence varying between 2.7 and 3.45 arcsec, depending on the monochromator setting: either high collimation or high intensity. The flux per area unit varies from 10 to 50 photons/s/cm2 from one configuration to the other. The BEaTriX beam performance was tested using an SPO MM, whose entrance pupil was fully illuminated by the expanded beam, and its focus was directly imaged onto the camera. The first light test returned a PSF and an EA in full agreement with expectations. As of today, the 4.51 keV beamline of BEaTriX is operational and can characterize modular X-ray optics, measuring their PSF and EA with a typical exposure of 30 minutes. [...] We expect BEaTriX to be a crucial facility for the functional test of modular X-ray optics, such as the SPO MMs for ATHENA.

astro-ph.IM↗

arXiv2022

STRIDES: Automated uniform models for 30 quadruply imaged quasars

Gravitational time delays provide a powerful one step measurement of $H_0$, independent of all other probes. One key ingredient in time delay cosmography are high accuracy lens models. Those are currently expensive to obtain, both, in terms of computing and investigator time (10$^{5-6}$ CPU hours and $\sim$ 0.5-1 year, respectively). Major improvements in modeling speed are therefore necessary to exploit the large number of lenses that are forecast to be discovered over the current decade. In order to bypass this roadblock, building on the work by Shajib et al. (2019), we develop an automated modeling pipeline and apply it to a sample of 30 quadruply imaged quasars and one lensed compact galaxy, observed by the Hubble Space Telescope in multiple bands. Our automated pipeline can derive models for 30/31 lenses with few hours of human time and <100 CPU hours of computing time for a typical system. For each lens, we provide measurements of key parameters and predictions of magnification as well as time delays for the multiple images. We characterize the cosmography-readiness of our models using the stability of differences in Fermat potential (proportional to time delay) w.r.t. modeling choices. We find that for 10/30 lenses our models are cosmography or nearly cosmography grade (<3% and 3-5% variations). For 6/30 lenses the models are close to cosmography grade (5-10%). These results are based on informative priors and will need to be confirmed by further analysis. However, they are also likely to improve by extending the pipeline modeling sequence and options. In conclusion, we show that uniform cosmography grade modeling of large strong lens samples is within reach.

astro-ph.CO↗

arXiv2022

In-depth direct imaging and spectroscopic characterization of the young Solar System analog HD 95086

Context. HD 95086 is a young nearby Solar System analog hosting a giant exoplanet orbiting at 57 au from the star between an inner and outer debris belt. The existence of additional planets has been suggested as the mechanism that maintains the broad cavity between the two belts. Aims. We present a dedicated monitoring of HD 95086 with the VLT/SPHERE instrument to refine the orbital and atmospheric properties of HD 95086 b, and to search for additional planets in this system. Methods. SPHERE observations, spread over ten epochs from 2015 to 2019 and including five new datasets, were used. Combined with archival observations, from VLT/NaCo (2012-2013) and Gemini/GPI (2013-2016), the extended set of astrometric measurements allowed us to refine the orbital properties of HD 95086 b. We also investigated the spectral properties and the presence of a circumplanetary disk around HD 95086 b by using the special fitting tool exploring the diversity of several atmospheric models. In addition, we improved our detection limits in order to search for a putative planet c via the K-Stacker algorithm. Results. We extracted for the first time the JH low-resolution spectrum of HD 95086 b by stacking the six best epochs, and confirm its very red spectral energy distribution. Combined with additional datasets from GPI and NaCo, our analysis indicates that this very red color can be explained by the presence of a circumplanetary disk around planet b, with a range of high-temperature solutions (1400-1600 K) and significant extinction (Av > 10 mag), or by a super-solar metallicity atmosphere with lower temperatures (800-1300 K), and small to medium amount of extinction (Av < 10 mag). We do not find any robust candidates for planet c, but give updated constraints on its potential mass and location.

astro-ph.EP↗

arXiv2022

The VMC survey -- XLVI. Stellar proper motions in the centre of the Large Magellanic Cloud

We present proper motion (PM) measurements within the central region of the Large Magellanic Cloud (LMC) using near-infrared data from the VISTA survey of the Magellanic Cloud system (VMC). This work encompasses 18 VMC tiles covering a total sky area of $\sim$28~deg$^2$. We computed absolute stellar PMs from multi-epoch observations in the $K_s$ filter over time baselines between $\sim$12 and 47 months. Our final catalogue contains $\sim$6,322,000 likely LMC member stars with derived PMs. We employed a simple flat-rotating disc model to analyse and interpret the PM data. We found a stellar centre of rotation ($\alpha_0$ = 79.95 deg +0.22 -0.23, $\delta_0$ = -69.31 deg +0.12 -0.11) that is in agreement with that resulting from Hubble Space Telescope data. The inferred viewing angles of the LMC disc (i = 33.5 deg +1.2 -1.3, $\Theta$ = 129.8 deg +1.9 -1.9) are in good agreement with values from the literature but suggest a higher inclination of the central parts of the LMC. Our data confirm a higher rotation amplitude for the young ($\lesssim$0.5~Gyr) stars compared to the intermediate-age/old ($\gtrsim$1~Gyr) population, which can be explained by asymmetric drift. We constructed spatially resolved velocity maps of the intermediate-age/old and young populations. Intermediate-age/old stars follow elongated orbits parallel to the bar's major axis, providing first observational evidence for $x_1$ orbits within the LMC bar. In the innermost regions, the motions show more chaotic structures. Young stars show motions along a central filamentary bar structure.

astro-ph.GA↗