arXiv Science⌕ Search

arXiv subjects

T. Alexopoulos

Publications and source records attributed to T. Alexopoulos.

At least 19 recordsLinked to original sources
arXiv2023

The New Small Wheel electronics

The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented.

hep-ex↗
arXiv2021

Ultra-low jitter clock distribution for the trigger electronics of the New Small Wheel for the ATLAS experiment

The Large Hadron Collider (LHC) at CERN plans to have a series of upgrades to increase its instantaneous luminosity to 7.5 the nominal luminosity. The increased luminosity drastically impacts the ATLAS trigger and readout data rates. The inner-most station of the ATLAS muon spectrometer, the so-called Small Wheels is being replaced with a New Small Wheel (NSW) system, consisting of Micromegas and small-strip Thin Gap Chambers (sTGC) detectors. The on-detector radiation levels required radiation tolerant electronics. The lower radiation levels on the rim of the NSW allowed utilizing commercial electronic chips, such as Field Programmable Gate Arrays (FPGAs), in the trigger chain of the sTGC detectors. Those FPGAs require an ultra-low jitter clock for the proper operation of their Gigabit transceivers (4.8 Gbps serial links). The initial design was based on a clock provided by a radiation tolerant ASIC designed at CERN, but due to its intrinsic jitter and consequent marginal error rate on the transmission lines, a different approach had to be chosen. An additional clock source based on commercial jitter cleaners, fan-out chips and optical transmitters driving dedicated fibers was built. The new scheme provides 64 low-jitter clocks (32 main and redundant) from the radiation-protected area (USA15) to the trigger electronics over 60 m of OM3 fiber.

physics.ins-det↗
arXiv2018

Construction techniques and performances of a full-size prototype Micromegas chamber for the ATLAS muon spectrometer upgrade

A full-size prototype of a Micromegas precision tracking chamber for the upgrade of the ATLAS detector at the LHC Collider has been built between October 2015 and April 2016. This paper describes in detail the procedures used in constructing the single modules of the chamber in various INFN laboratories and the final assembly at the Laboratori Nazionali di Frascati (LNF). Results of the chamber exposure to the CERN SPS/H8 beam line in June 2016 are also presented. The performances achieved in the construction and the results of the test beam are compared with the requirements, which are imposed by the severe environment during the data-taking of the LHC foreseen for the next years.

physics.ins-det↗
arXiv2016

Track reconstruction through the application of the Legendre Transform on ellipses

We propose a pattern recognition method that identifies the common tangent lines of a set of ellipses. The detection of the tangent lines is attained by applying the Legendre transform on a given set of ellipses. As context, we consider a hypothetical detector made out of layers of chambers, each of which returns an ellipse as an output signal. The common tangent of these ellipses represents the trajectory of a charged particle crossing the detector. The proposed method is evaluated using ellipses constructed from Monte Carlo generated tracks.

physics.data-an↗
arXiv2014

Benford's Law and the Universe

Benford's law predicts the occurrence of the $n^{\mathrm{th}}$ digit of numbers in datasets originating from various sources of the world, ranging from financial data to atomic spectra. It is intriguing that although many features of Benford's law have been proven and analysed, it is still not fully mathematically understood. In this paper we investigate the distances of galaxies and stars by comparing the first, second and third significant digit probabilities with Benford's predictions. It is found that the distances of galaxies follow reasonably well the first digit law and the star distances agree very well with the first, second and third significant digit.

physics.pop-ph↗
arXiv2014

Identification of circles from datapoints using Gaussian sums

We present a pattern recognition method which use datapoints on a plane and estimates the parameters of a circle. MC data are generated in order to test the method's efficiency over noise hits, uncertainty in the hits positions and number of datapoints. The scenario were the hits from a quadrant of the circle are missing is also considered. The method proposed is proven to be robust, accurate and very efficient.

physics.ins-det↗
arXiv2014

Examining the Geometric Mean Method for the Extraction of Spatial Resolution

The spatial resolution of a detector, using a reference detector telecscope, can be measured applying the geometric mean method, with tracks reconstructed from hits of all the detectors, including ($σ_\mathrm{in}$) and excluding ($σ_\mathrm{ex}$) the hit from the detector under study. The geometric mean of the two measured resolution values ($σ=\sqrt{σ_\mathrm{ex}σ_\mathrm{in}}$), is proposed to provide a more accurate estimate of the intrinsic detector resolution. This method has been tested using a Monte Carlo algorithm and is proven to give accurate results, independently of the distance between the detectors used for the track fitting. The method does not give meaningful results if all the detectors do not carry the same characteristics.

physics.ins-det↗
arXiv2013

First Look at the Physics Case of TLEP

The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is among the most attractive solutions proposed so far. It has a clean experimental environment, produces high luminosity for top-quark, Higgs boson, W and Z studies, accommodates multiple detectors, and can reach energies up to the t-tbar threshold and beyond. It will enable measurements of the Higgs boson properties and of Electroweak Symmetry-Breaking (EWSB) parameters with unequalled precision, offering exploration of physics beyond the Standard Model in the multi-TeV range. Moreover, being the natural precursor of the VHE-LHC, a 100 TeV hadron machine in the same tunnel, it builds up a long-term vision for particle physics. Altogether, the combination of TLEP and the VHE-LHC offers, for a great cost effectiveness, the best precision and the best search reach of all options presently on the market. This paper presents a first appraisal of the salient features of the TLEP physics potential, to serve as a baseline for a more extensive design study.

hep-ex↗
arXiv2013

Ageing studies of resistive Micromegas detectors for the HL-LHC

Resistive-anode Micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working in high flux and high radiations environment like in the HL-LHC (ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to assess their capabilities to handle the HL-LHC environment on a long-term period. A prototype has been exposed to several types of irradiations (X-rays, cold neutrons, 60 Co gammas) up to an equivalent HL-LHC time of more than five years without showing any degradation of the performances in terms of gain and energy resolution. Beam test studies took place in October 2012 to assess the tracking performances (efficiency, spatial resolution,...). Results of ageing studies and beam test performances are reported in this paper.

physics.ins-det↗
arXiv2013

An ageing study of resistive micromegas for the HL-LHC environment

Resistive-anode micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working at high flux and high ionizing radiation like in the HL-LHC (up to ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to assess their capabilities to handle the HL-LHC environment on a long-term period. A prototype has been exposed to several types of irradiation (X-rays, cold neutrons, $^{60}$Co gammas and alphas) above the equivalent charge produced at the detector in five HL-LHC running years without showing any degradation of the performances in terms of gain and energy resolution. This study has been completed with the characterization of the tracking performances in terms of efficiency and spatial resolution, verifying the compatibility of results obtained with both resistive micromegas detectors, irradiated and non-irradiated one.

physics.ins-det↗
arXiv2012

Performances of Anode-resistive Micromegas for HL-LHC

Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities. We studied performances of four different resistive Micromegas detectors with different read-out strip pitches. These chambers were tested using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and a efficiency of ~98%. The track angle effect on the efficiency was also studied. Our results show that resistive techniques induce no degradation on the efficiency or resolution, with respect to the standard Micromegas. In some configuration the resistive coating is able to reduce the discharge currents at least by a factor of 100.Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities. We studied performances of four different resistive Micromegas detectors with different read-out strip pitches. These chambers were tested using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and a efficiency of \sim98%. The track angle effect on the efficiency was also studied. Our results show that resistive techniques induce no degradation on the efficiency or resolution, with respect to the standard Micromegas. In some configuration the resistive coating is able to reduce the discharge currents at least by a factor of 100.

physics.ins-det↗
arXiv2012

Performances and ageing study of resistive-anodes Micromegas detectors for HL-LHC environment

With the tenfold luminosity increase envisaged at the HL-LHC, the background (photons, neutrons, ...) and the event pile-up probability are expected to increase in proportion in the different experiments, especially in the forward regions like, for instance, the muons chambers of the ATLAS detector. Detectors based on the Micromegas principle should be good alternatives for the detector upgrade in the HL-LHC framework because of a good spatial (<100 \mum) and time (few ns) resolutions, high-rate capability, radiation hardness, good robustness and the possibility to build large areas. The aim of this study is to demonstrate that it is possible to reduce the discharge probability and protect the electronics by using a resistive anode plane in a high flux hadrons environment. Several prototypes of 10x10 cm2, with different pitches (0.5 to 2 mm) and different resistive layers have been tested at CERN (pi+@SPS). Several tests have been performed with a telescope at different voltages to assess the performances of the detectors in terms of position resolution and efficiency. The spark behaviour in these conditions has also been evaluated. Resistive coating has been shown to be a successful method to reduce the effect of sparks on the efficiency of micromegas. A good spatial resolution (~80 \mum) can be reached with a resistive strip coating detector of 1mm pitch and a high efficiency (> 98%) can be achieved with resistive-anode micromegas detector. An X-rays irradiation has been also performed, showing no ageing effect after more than 21 days exposure and an integrated charge of almost 1C.

physics.ins-det↗
arXiv2009

Simple Behavior of Primary Cross Sections for Low Mass Particles in p-pbar Collisions at y=0 and sqrt(s)=1.8 TeV

A set of inclusive cross sections at zero rapidity is presented for p-pbar interactions at center of mass energy sqrt(s)=1.8 TeV. Six particle cross sections are corrected for secondary contributions from decays of higher mass resonances in order to produce a set of primary cross sections. The primary cross sections per spin state are well described by d(sigma^p)/dy|_(y=0)= 0.721*(pi*lambdabar_(pi)^2)*exp(-m/T), where m is the particle rest mass, T=hbar*c/r_h, and r_h=0.97 fm. The deuterium production cross section is also described if r_h is replaced by r_A=r_h*A^(1/3). The same exponential in m and T describes primary charm fractions in e+e- collisions at least up to the J/Psi mass. There is no significant evidence for strangeness or charm suppression if only primary production of light hadrons is considered. There is evidence that the primary cross section for each particle may have the same value for pp and pbar-p collisions and that it may have nearly constant values between sqrt(s)=63 GeV and sqrt(s)=1800 GeV. Fits to the final state transverse momenta of the particles using a gas model favor a temperature T=132 MeV, a chemical potential mu=129 MeV, and a transverse flow of the gas with beta_f=0.27.

hep-ex↗
arXiv2009

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.

hep-ex↗
arXiv2008

Observation of the Decay Xi^0 --> Sigma^+ mu^- nu(bar)

The Xi^0 muon semi-leptonic decay has been observed for the first time with nine identified events using the KTeV beam line and detector at Fermilab. The decay is normalized to the Xi^0 beta decay mode and yields a value for the ratio of decay rates of $(1.8^{+0.7}_{-0.5}(stat.)\pm0.2(syst.))\times 10^{-2}$. This is in agreement with the SU(3) flavor symmetric quark model.

hep-ex↗
arXiv2004

Measurements of the Branching Fractions and Decay Distributions for KL->\pi\mu\nu\gamma and KL->\pi e\nu\gamma

We present measurements of R_Kl3rad = Gamma(KL->\pi\ell\nu\gamma; Egcm > 10 MeV)/Gamma(KL->\pi\ell\nu), where ell = mu or e, and Egcm is the photon energy in the kaon rest frame. These measurements are based on KL decays collected in 1997 by the KTeV (E832) experiment at Fermilab. With samples of 1385 KL->\pi\mu\nu\gamma and 14221 KL->\pi\e\nu\gamma candidates, we find R_Km3rad = (0.530 +- 0.019)% and R_Ke3rad = (4.942 +- 0.062)%. We also examine distributions of photon energy and lepton-photon angle.

hep-ex↗
arXiv2004

Measurements of KL Branching Fractions and the CP Violation Parameter |eta+-|

We present new measurements of the six largest branching fractions of the KL using data collected in 1997 by the KTeV experiment (E832) at Fermilab. The results are B(KL -> pi e nu) = 0.4067 +- 0.0011 B(KL -> pi mu nu) = 0.2701 +- 0.0009 B(KL -> pi+ pi- pi0) = 0.1252 +- 0.0007 B(KL -> pi0 pi0 pi0) = 0.1945 +- 0.0018 B(KL -> pi+ pi-) = (1.975 +- 0.012)E-3, and B(KL -> pi0 pi0) = (0.865 +- 0.010)E-3, where statistical and systematic errors have been summed in quadrature. We also determine the CP violation parameter |eta+-| to be (2.228 +- 0.010)E-3. Several of these results are not in good agreement with averages of previous measurements.

hep-ex↗