arXiv subjects

Symeon Chatzinotas

Publications and source records attributed to Symeon Chatzinotas.

At least 127 records · Page 7Linked to original sources

arXiv2025

DT-Aided Resource Management in Spectrum Sharing Integrated Satellite-Terrestrial Networks

The integrated satellite-terrestrial networks (ISTNs) through spectrum sharing have emerged as a promising solution to improve spectral efficiency and meet increasing wireless demand. However, this coexistence introduces significant challenges, including inter-system interference (ISI) and the low Earth orbit satellite (LSat) movements. To capture the actual environment for resource management, we propose a time-varying digital twin (DT)-aided framework for ISTNs incorporating 3D map that enables joint optimization of bandwidth (BW) allocation, traffic steering, and resource allocation, and aims to minimize congestion. The problem is formulated as a mixed-integer nonlinear programming (MINLP), addressed through a two-phase algorithm based on successive convex approximation (SCA) and compressed sensing approaches. Numerical results demonstrate the proposed method's superior performance in queue length minimization compared to benchmarks.

eess.SP↗

arXiv2025

The Impact of LoRA Adapters on LLMs for Clinical Text Classification Under Computational and Data Constraints

Fine-tuning Large Language Models (LLMs) for clinical Natural Language Processing (NLP) poses significant challenges due to domain gap, limited data, and stringent hardware constraints. In this study, we evaluate four adapter techniques-Adapter, Lightweight, TinyAttention, and Gated Residual Network (GRN) - equivalent to Low-Rank Adaptation (LoRA), for clinical note classification under real-world, resource-constrained conditions. All experiments were conducted on a single NVIDIA Quadro P620 GPU (2 GB VRAM, 512 CUDA cores, 1.386 TFLOPS FP32), limiting batch sizes to <8 sequences and maximum sequence length to 256 tokens. Our clinical corpus comprises only 580 000 tokens, several orders of magnitude smaller than standard LLM pre-training datasets. We fine-tuned three biomedical pre-trained LLMs (CamemBERT-bio, AliBERT, DrBERT) and two lightweight Transformer models trained from scratch. Results show that 1) adapter structures provide no consistent gains when fine-tuning biomedical LLMs under these constraints, and 2) simpler Transformers, with minimal parameter counts and training times under six hours, outperform adapter-augmented LLMs, which required over 1000 GPU-hours. Among adapters, GRN achieved the best metrics (accuracy, precision, recall, F1 = 0.88). These findings demonstrate that, in low-resource clinical settings with limited data and compute, lightweight Transformers trained from scratch offer a more practical and efficient solution than large LLMs, while GRN remains a viable adapter choice when minimal adaptation is needed.

cs.CL↗

arXiv2025

Deadline-Aware Joint Task Scheduling and Offloading in Mobile Edge Computing Systems

The demand for stringent interactive quality-of-service has intensified in both mobile edge computing (MEC) and cloud systems, driven by the imperative to improve user experiences. As a result, the processing of computation-intensive tasks in these systems necessitates adherence to specific deadlines or achieving extremely low latency. To optimize task scheduling performance, existing research has mainly focused on reducing the number of late jobs whose deadlines are not met. However, the primary challenge with these methods lies in the total search time and scheduling efficiency. In this paper, we present the optimal job scheduling algorithm designed to determine the optimal task order for a given set of tasks. In addition, users are enabled to make informed decisions for offloading tasks based on the information provided by servers. The details of performance analysis are provided to show its optimality and low complexity with the linearithmic time O(nlogn), where $n$ is the number of tasks. To tackle the uncertainty of the randomly arriving tasks, we further develop an online approach with fast outage detection that achieves rapid acceptance times with time complexity of O(n). Extensive numerical results are provided to demonstrate the effectiveness of the proposed algorithm in terms of the service ratio and scheduling cost.

cs.DC↗

arXiv2025

QTCAJOSA: Low-Complexity Joint Offloading and Subchannel Allocation for NTN-Enabled IoMT

In this work, we consider the resource allocation problem for task offloading from Internet of Medical Things (IoMT) devices, to a non-terrestrial network. The architecture considers clusters of IoMT devices that offload their tasks to a dedicated unmanned aerial vehicle (UAV) serving as a multi-access edge computing (MEC) server, which can compute the task or further offload it to an available high-altitude platform station (HAPS) or to a low-earth orbit (LEO) satellite for remote computing. We formulate a problem that has as objective the minimization of the weighted sum delay of the tasks. Given the non-convex nature of the problem, and acknowledging that the complexity of the optimization algorithms impact their performance, we derive a low-complexity joint subchannel allocation and offloading decision algorithm with dynamic computing resource initialization, developed as a greedy heuristic based on convex optimization criteria. Simulations show the gain obtained by including the different non-terrestrial nodes against architectures without them.

eess.SY↗

arXiv2025

Improved Differential Evolution for Enhancing the Aggregated Channel Estimation of RIS-Aided Cell-Free Massive MIMO

Cell-Free Massive multiple-input multiple-output (MIMO) systems are investigated with the support of a reconfigurable intelligent surface (RIS). The RIS phase shifts are designed for improved channel estimation in the presence of spatial correlation. Specifically, we formulate the channel estimate and estimation error expressions using linear minimum mean square error (LMMSE) estimation for the aggregated channels. An optimization problem is then formulated to minimize the average normalized mean square error (NMSE) subject to practical phase shift constraints. To circumvent the problem of inherent nonconvexity, we then conceive an enhanced version of the differential evolution algorithm that is capable of avoiding local minima by introducing an augmentation operator applied to some high-performing Diffential Evolution (DE) individuals. Numerical results indicate that our proposed algorithm can significantly improve the channel estimation quality of the state-of-the-art benchmarks.

cs.IT↗

arXiv2025

Enhanced Throughput and Seamless Handover Solutions for Urban 5G-Vehicle C-Band Integrated Satellite-Terrestrial Networks

This paper investigates downlink transmission in 5G Integrated Satellite-Terrestrial Networks (ISTNs) supporting automotive users (UEs) in urban environments, where base stations (BSs) and Low Earth Orbit (LEO) satellites (LSats) cooperate to serve moving UEs over shared C-band frequency carriers. Urban settings, characterized by dense obstructions, together with UE mobility, and the dynamic movement and coverage of LSats pose significant challenges to user association and resource allocation. To address these challenges, we formulate a multi-objective optimization problem designed to improve both throughput and seamless handover (HO). Particularly, the formulated problem balances sum-rate (SR) maximization and connection change (CC) minimization through a weighted trade-off by jointly optimizing power allocation and BS-UE/LSat-UE associations over a given time window. This is a mixed-integer and non-convex problem which is inherently difficult to solve. To solve this problem efficiently, we propose an iterative algorithm based on the Successive Convex Approximation (SCA) technique. Furthermore, we introduce a practical prediction-based algorithm capable of providing efficient solutions in real-world implementations. Especially, the simulations use a realistic 3D map of London and UE routes obtained from the Google Navigator application to ensure practical examination. Thanks to these realistic data, the simulation results can show valuable insights into the link budget assessment in urban areas due to the impact of buildings on transmission links under the blockage, reflection, and diffraction effects. Furthermore, the numerical results demonstrate the effectiveness of our proposed algorithms in terms of SR and the CC-number compared to the greedy and benchmark algorithms.

eess.SP↗

arXiv2025

Performance Analysis of MDI-QKD in Thermal-Loss and Phase Noise Channels

Measurement-device-independent quantum key distribution (MDI-QKD), enhances quantum cryptography by mitigating detector-side vulnerabilities. This study analyzes MDI-QKD performance in thermal-loss and phase noise channels, modeled as depolarizing and dephasing channels to capture thermal and phase noise effects. Based on this channel framework, we derive analytical expressions for Bell state measurement probabilities, quantum bit error rates (QBER), and secret key rates (SKR) of MDI-QKD. Our simulations reveal that SKR decreases exponentially with transmission distance, with performance further degraded by increasing thermal noise and phase noise, particularly under high thermal noise conditions. These findings offer insights into enhancing MDI-QKD's noise resilience, supporting secure key generation in practical, noisy environments.

quant-ph↗

arXiv2025

Crosstalk-Resilient Quantum MIMO for Scalable Quantum Communications

We address the challenge of crosstalk in quantum multiplexing -an obstacle to scaling throughput in quantum communication networks. Crosstalk arises when physically coupled quantum modes interfere, degrading signal fidelity. We propose a mitigation strategy based on encoding discrete-variable (DV) quantum information into continuous-variable (CV) bosonic modes using Gottesman-Kitaev-Preskill (GKP) codes. By analyzing the effect of mode-mixing interference, we show that under specific noise strength conditions, the interaction can be absorbed into a gauge subsystem that leaves the logical content intact. We provide rigorous conditions for perfect transmission in the ideal case, derive the structure of the output codes and prove the existence of a gauge-fixing decoder enabling recovery of the logical information. Numerical simulations under displacement Gaussian noise illustrate the fidelity behavior and rate-fidelity tradeoff. Our results establish a coding-theoretic foundation for crosstalk-resilient multiplexing in quantum networks.

quant-ph↗

arXiv2025

Low-Complexity Channel Estimation Protocol for Non-Diagonal RIS-Assisted Communications

Non-diagonal reconfigurable intelligent surfaces (RISs) offer enhanced wireless signal manipulation over conventional RIS by enabling the incident signal on any of its $M$ elements to be reflected from another element via an $M \times M$ switch array. To fully exploit this flexible configuration, the acquisition of individual channel state information (CSI) is essential. However, due to the passive nature of the RIS, cascaded channel estimation is performed, as the RIS itself lacks signal processing capabilities. This entails estimating the CSI for the $M \times M$ switch array cascaded channels, resulting in estimating $M^2$ coefficients, to identify the optimal configuration of the non-diagonal RIS that maximizes the channel gain. In this paper, we propose a low-complexity channel estimation protocol that substantially reduces the estimation overhead from the exhaustive $M^2$ coefficients to only $3M$ coefficients for both single-input single-output (SISO) and multiple-input single-output (MISO) systems. Specifically, a three-stage pilot-based protocol is proposed to estimate scaled versions of the user-RIS and RIS-base-station (BS) channels in the first two stages using the least square (LS) estimator and the commonly used ON/OFF protocol for conventional RIS. These scaled estimates enable the optimization of the switch array. In the third stage, the cascaded user-RIS-BS channels are estimated to enable efficient beamforming optimization. Complexity analysis shows that our proposed protocol significantly reduces the BS estimation complexity from $\mathcal{O}(NM^2)$ to $\mathcal{O}(NM)$, where $N$ is the number of BS antennas. This complexity is similar to the ON/OFF-based LS estimation for conventional diagonal RIS.

eess.SP↗

arXiv2025

Interference in Spectrum-Sharing Integrated Terrestrial and Satellite Networks: Modeling, Approximation, and Robust Transmit Beamforming

This paper investigates robust transmit (TX) beamforming from the satellite to user terminals (UTs), based on statistical channel state information (CSI). The proposed design specifically targets the mitigation of satellite-to-terrestrial interference in spectrum-sharing integrated terrestrial and satellite networks. By leveraging the distribution information of terrestrial UTs, we first establish an interference model from the satellite to terrestrial systems without shared CSI. Based on this, robust TX beamforming schemes are developed under both the interference threshold and the power budget. Two optimization criteria are considered: satellite weighted sum rate maximization and mean square error minimization. The former achieves a superior achievable rate performance through an iterative optimization framework, whereas the latter enables a low-complexity closed-form solution at the expense of reduced rate, with interference constraints satisfied via a bisection method. To avoid complex integral calculations and the dependence on user distribution information in inter-system interference evaluations, we propose a terrestrial base station position-aided approximation method, and the approximation errors are subsequently analyzed. Numerical simulations validate the effectiveness of our proposed schemes.

eess.SP↗

arXiv2025

Dynamic Beyond 5G and 6G Connectivity: Leveraging NTN and RIS Synergies for Optimized Coverage and Capacity in High-Density Environments

The increasing demand for reliable, high-capacity communication during large-scale outdoor events poses significant challenges for traditional Terrestrial Networks (TNs), which often struggle to provide consistent coverage in high-density environments. This paper presents a novel 6G radio network planning framework that integrates Non-Terrestrial Networks (NTNs) with Reconfigurable Intelligent Surfaces (RISs) to deliver ubiquitous coverage and enhanced network capacity. Our framework overcomes the limitations of conventional deployable base stations by leveraging NTN architectures, including Low Earth Orbit (LEO) satellites and passive RIS platforms seamlessly integrated with Beyond 5G (B5G) TNs. By incorporating advanced B5G technologies such as Massive Multiple Input Multiple Output (mMIMO) and beamforming, and by optimizing spectrum utilization across the C, S, and Ka bands, we implement a rigorous interference management strategy based on a dynamic SINR model. Comprehensive calculations and simulations validate the proposed framework, demonstrating significant improvements in connectivity, reliability, and cost-efficiency in crowded scenarios. This integration strategy represents a promising solution for meeting the evolving demands of future 6G networks.

cs.NI↗

arXiv2025

UAV-Assisted 5G Networks: Mobility-Aware 3D Trajectory Optimization and Resource Allocation for Dynamic Environments

This work proposes a framework for the robust design of UAV-assisted wireless networks that combine 3D trajectory optimization with user mobility prediction to address dynamic resource allocation challenges. We proposed a sparse second-order prediction model for real-time user tracking coupled with heuristic user clustering to balance service quality and computational complexity. The joint optimization problem is formulated to maximize the minimum rate. It is then decomposed into user association, 3D trajectory design, and resource allocation subproblems, which are solved iteratively via successive convex approximation (SCA). Extensive simulations demonstrate: (1) near-optimal performance with $ε\approx 0.67\%$ deviation from upper-bound solutions, (2) $16\%$ higher minimum rates for distant users compared to non-predictive 3D designs, and (3) $10-30\%$ faster outage mitigation than time-division benchmarks. The framework's adaptive speed control enables precise mobile user tracking while maintaining energy efficiency under constrained flight time. Results demonstrate superior robustness in edge-coverage scenarios, making it particularly suitable for $5G/6G$ networks.

eess.SP↗

arXiv2025

Pinching Antenna Systems versus Reconfigurable Intelligent Surfaces in mmWave

Flexible and intelligent antenna designs, such as pinching antenna systems and reconfigurable intelligent surfaces (RIS), have gained extensive research attention due to their potential to enhance the wireless channels. This letter, for the first time, presents a comparative study between the emerging pinching antenna systems and RIS in millimeter wave (mmWave) bands. Our results reveal that RIS requires an extremely large number of elements (in the order of $10^4$) to outperform pinching antenna systems in terms of spectral efficiency, which severely impact the energy efficiency performance of RIS. Moreover, pinching antenna systems demonstrate greater robustness against hardware impairments and severe path loss typically encountered in high-frequency mmWave bands.

eess.SP↗

arXiv2025

Network Digital Twin for 6G and Beyond: An End-to-End View Across Multi-Domain Network Ecosystems

With the rapid development of technology, the number of smart mobile users is increasing, accompanied by growing demands from applications such as virtual/augmented reality (VR/XR), remote surgery, autonomous vehicles, and real-time holographic communications, all of which require high transmission rates and ultra-low latency in 6G and beyond networks (6G+). This poses enormous challenges in efficiently deploying large-scale networks, including network design, planning, troubleshooting, optimization, and maintenance, without affecting the user experience. Network Digital Twin (NDT) has emerged as a potential solution, enabling the creation of a virtual model that reflects the actual network, supporting the simulation of various network designs, applying diverse operating policies, and reproducing complex fault scenarios under real-world conditions. This motivate us for this study, where we provide a comprehensive survey of NDT in the context of 6G+, covering areas such as radio access networks (RAN), transport networks, 5G core networks and beyond (5GCORE+), cloud/edge computing, applications (blockchain, health system, manufacturing, security, and vehicular networks), non-terrestrial networks (NTNs), and quantum networks, from both academic and industrial perspectives. In particular, we are the first to provide an in-depth guide and usage of RAN and 5GCORE+ for NDT. Then, we provide an extensive review of foundation technologies such as transport networks, cloud/edge computing, applications, NTNs, and quantum networks in NDT. Finally, we discuss the key challenges, open issues, and future research directions for NDT in the context of 6G+.

cs.NI↗

arXiv2025

Transformer Meets Gated Residual Networks To Enhance Photoplethysmogram Artifact Detection Informed by Mutual Information Neural Estimation

This study delves into the effectiveness of various learning methods in improving Transformer models, focusing particularly on the Gated Residual Network Transformer (GRN-Transformer) in the context of pediatric intensive care units (PICU) with limited data availability. Our findings indicate that Transformers trained via supervised learning are less effective compared to MLP, CNN, and LSTM networks in such environments. Yet, leveraging unsupervised and self-supervised learning on unannotated data, with subsequent fine-tuning on annotated data, notably enhances Transformer performance, although not to the level of the GRN-Transformer. Central to our research is the analysis of different activation functions for the Gated Linear Unit (GLU), a crucial element of the GRN structure. We also employ Mutual Information Neural Estimation (MINE) to evaluate the GRN's contribution. Additionally, the study examines the effects of integrating GRN within the Transformer's Attention mechanism versus using it as a separate intermediary layer. Our results highlight that GLU with sigmoid activation stands out, achieving 0.98 accuracy, 0.91 precision, 0.96 recall, and 0.94 F1 score. The MINE analysis supports the hypothesis that GRN enhances the mutual information between the hidden representations and the output. Moreover, the use of GRN as an intermediate filter layer proves more beneficial than incorporating it within the Attention mechanism. In summary, this research clarifies how GRN bolsters GRN-Transformer's performance, surpassing other learning techniques. These findings offer a promising avenue for adopting sophisticated models like Transformers in data-constrained environments, such as PPG artifact detection in PICU settings.

eess.SP↗

arXiv2025

Swarm Intelligence Optimization of Multi-RIS Aided MmWave Beamspace MIMO

We investigate the performance of a multiple reconfigurable intelligence surface (RIS)-aided millimeter wave (mmWave) beamspace multiple-input multiple-output (MIMO) system with multiple users (UEs). We focus on a challenging scenario in which the direct links between the base station (BS) and all UEs are blocked, and communication is facilitated only via RISs. The maximum ratio transmission (MRT) is utilized for data precoding, while a low-complexity algorithm based on particle swarm optimization (PSO) is designed to jointly perform beam selection, power allocation, and RIS profile configuration. The proposed optimization approach demonstrates positive trade-offs between the complexity (in terms of running time) and the achievable sum rate. In addition, our results demonstrate that due to the sparsity of beamspace channels, increasing the number of unit cells (UCs) at RISs can lead to higher achievable rates than activating a larger number of beams at the MIMO BS.

cs.IT↗

arXiv2025

Multi-Active RIS-Assisted THz Cell-Free Systems: Spectral and Energy Efficiency Tradeoff

Reconfigurable intelligent surfaces (RISs) and cell-free massive multiple-input multiple-output (CF-mMIMO) are effective solutions for mitigating large path loss and inter-cell interference in terahertz (THz) systems. However, passive RISs are notably limited from double-fading attenuation, motivating the use of active RISs with power amplification to improve signal strength. In this paper, we investigate a multi-active RIS-aided wideband CF-mMIMO system for THz communications, considering low-resolution digital-to-analog converters (DACs) to optimize the spectral efficiency (SE)-energy efficiency (EE) tradeoff by adjusting precoding vectors and reflection coefficient response of the RISs, subject to power and minimum desirable per-user rate constraints. This leads to a highly complex and non-convex, multi-objective and fractional optimization problem. To solve it, we propose a tailored quadratic transformation to manage the fractional form. This allows decomposition into two subproblems, which are iteratively solved via a successive convex approximation algorithm to optimize the precoding vectors and active RIS reflection coefficients until convergence. Numerical results demonstrate that the proposed active RIS-aided CF-mMIMO system effectively addresses propagation loss and limited scattering in THz communication, achieving superior EE and SE compared to conventional passive RIS across diverse scenarios. Furthermore, the integration of low-resolution DACs shows significant improvement in EE while preserving satisfactory communication performance.

eess.SP↗

arXiv2025

Statistical CSI-Based Distributed Precoding Design for OFDM-Cooperative Multi-Satellite Systems

This paper investigates the design of distributed precoding for multi-satellite massive MIMO transmissions. We first conduct a detailed analysis of the transceiver model, in which delay and Doppler precompensation is introduced to ensure coherent transmission. In this analysis, we examine the impact of precompensation errors on the transmission model, emphasize the near-independence of inter-satellite interference, and ultimately derive the received signal model. Based on such signal model, we formulate an approximate expected rate maximization problem that considers both statistical channel state information (sCSI) and compensation errors. Unlike conventional approaches that recast such problems as weighted minimum mean square error (WMMSE) minimization, we demonstrate that this transformation fails to maintain equivalence in the considered scenario. To address this, we introduce an equivalent covariance decomposition-based WMMSE (CDWMMSE) formulation derived based on channel covariance matrix decomposition. Taking advantage of the channel characteristics, we develop a low-complexity decomposition method and propose an optimization algorithm. To further reduce computational complexity, we introduce a model-driven scalable deep learning (DL) approach that leverages the equivariance of the mapping from sCSI to the unknown variables in the optimal closed-form solution, enhancing performance through novel dense Transformer network and scaling-invariant loss function design. Simulation results validate the effectiveness and robustness of the proposed method in some practical scenarios. We also demonstrate that the DL approach can adapt to dynamic settings with varying numbers of users and satellites.

eess.SP↗