arXiv subjects

Symeon Chatzinotas

Publications and source records attributed to Symeon Chatzinotas.

At least 235 records · Page 13Linked to original sources

arXiv2023

Deep Reinforcement Learning for Backscatter Communications: Augmenting Intelligence in Future Internet of Things

Backscatter communication (BC) technology offers sustainable solutions for next-generation Internet-of-Things (IoT) networks, where devices can transmit data by reflecting and adjusting incident radio frequency signals. In parallel to BC, deep reinforcement learning (DRL) has recently emerged as a promising tool to augment intelligence and optimize low-powered IoT devices. This article commences by elucidating the foundational principles underpinning BC systems, subsequently delving into the diverse array of DRL techniques and their respective practical implementations. Subsequently, it investigates potential domains and presents recent advancements in the realm of DRL-BC systems. A use case of RIS-aided non-orthogonal multiple access BC systems leveraging DRL is meticulously examined to highlight its potential. Lastly, this study identifies and investigates salient challenges and proffers prospective avenues for future research endeavors.

eess.SP↗

arXiv2023

Fairness Enhancement of UAV Systems with Hybrid Active-Passive RIS

We consider unmanned aerial vehicle (UAV)-enabled wireless systems where downlink communications between a multi-antenna UAV and multiple users are assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). We aim at a fairness design of two typical UAV-enabled networks, namely the static-UAV network where the UAV is deployed at a fixed location to serve all users at the same time, and the mobile-UAV network which employs the time division multiple access protocol. In both networks, our goal is to maximize the minimum rate among users through jointly optimizing the UAV's location/trajectory, transmit beamformer, and RIS coefficients. The resulting problems are highly nonconvex due to a strong coupling between the involved variables. We develop efficient algorithms based on block coordinate ascend and successive convex approximation to effectively solve these problems in an iterative manner. In particular, in the optimization of the mobile-UAV network, closed-form solutions to the transmit beamformer and RIS passive coefficients are derived. Numerical results show that a hybrid RIS equipped with only 4 active elements and a power budget of 0 dBm offers an improvement of 38%-63% in minimum rate, while that achieved by a passive RIS is only about 15%, with the same total number of elements.

cs.IT↗

arXiv2023

Satellite-based Quantum Network: Security and Challenges over Atmospheric Channel

The ultra-secure quantum network leverages quantum cryptography to deliver unsurpassed data transfer security. In principle, the well-known quantum key distribution (QKD) achieves unconditional security, which raises concerns about the trustworthiness of 6G wireless systems in order to mitigate the gap between practice and theory. The long-distance satellite-to-ground evolving quantum network distributes keys that are ubiquitous to the node on the ground through low-orbit satellites. As the secret key sequence is encoded into quantum states, it is sent through the atmosphere via a quantum channel. It still requires more effort in the physical layer design of deployment ranges, transmission, and security to achieve high-quality quantum communication. In this paper, we first review the quantum states and channel properties for satellite-based quantum networks and long-range quantum state transfer (QST). Moreover, we highlight some challenges, such as transmissivity statistics, estimation of channel parameters and attack resilience, quantum state transfer for satellite-based quantum networks, and wavepacket shaping techniques over atmospheric channels. We underline two research directions that consider the QST and wavepacket shaping techniques for atmospheric transmission in order to encourage further research toward the next generation of satellite-based quantum networks.

quant-ph↗

arXiv2023

Achievable Rate of a STAR-RIS Assisted Massive MIMO System Under Spatially-Correlated Channels

Reconfigurable intelligent surfaces (RIS)-assisted massive multiple-input multiple-output (mMIMO) is a promising technology for applications in next-generation networks. However, reflecting-only RIS provides limited coverage compared to a simultaneously transmitting and reflecting RIS (STAR-RIS). Hence, in this paper, we focus on the downlink achievable rate and its optimization of a STAR-RIS-assisted mMIMO system. Contrary to previous works on STAR-RIS, we consider mMIMO, correlated fading, and multiple user equipments (UEs) at both sides of the RIS. In particular, we introduce an estimation approach of the aggregated channel with the main benefit of reduced overhead links instead of estimating the individual channels. {Next, leveraging channel hardening in mMIMO and the use-and-forget bounding technique, we obtain an achievable rate in closed-form that only depends on statistical channel state information (CSI). To optimize the amplitudes and phase shifts of the STAR-RIS, we employ a projected gradient ascent method (PGAM) that simultaneously adjusts the amplitudes and phase shifts for both energy splitting (ES) and mode switching (MS) STAR-RIS operation protocols.} By considering large-scale fading, the proposed optimization can be performed every several coherence intervals, which can significantly reduce overhead. Considering that STAR-RIS has twice the number of controllable parameters compared to conventional reflecting-only RIS, this accomplishment offers substantial practical benefits. Simulations are carried out to verify the analytical results, reveal the interplay of the achievable rate with fundamental parameters, and show the superiority of STAR-RIS regarding its achievable rate compared to its reflecting-only counterpart.

cs.IT↗

arXiv2023

Spatial Modulation with Energy Detection: Diversity Analysis and Experimental Evaluation

In this paper, we present a non-coherent energy detection scheme for spatial modulation (SM) systems. In particular, the use of SM is motivated by its low-complexity implementation in comparison to multiple-input multiple-output (MIMO) systems, achieved through the activation of a single antenna during transmission. Moreover, energy detection-based communications restrict the channel state information to the magnitude of the fading gains. This consideration makes the design applicable for low-cost low-powered devices since phase estimation and its associated circuitry are avoided. We derive an energy detection metric for a multi-antenna receiver based on the maximum-likelihood (ML) criterion. By considering a biased pulse amplitude modulation, we develop an analytical framework for the SM symbol error rate at high signal-to-noise ratios. Numerical results show that the diversity order is proportional to half the number of receive antennas; this result stems from having partial receiver channel knowledge. In addition, we compare the performance of the proposed scheme with that of the coherent ML receiver and show that the SM energy detector outperforms its coherent counterpart in certain scenarios, particularly when utilizing non-negative constellations. Ultimately, we implement an SM testbed using software-defined radio devices and provide experimental error rate measurements that validate our theoretical contribution.

cs.IT↗

arXiv2023

Terahertz-Band Direction Finding With Beam-Split and Mutual Coupling Calibration

Terahertz (THz) band is currently envisioned as the key building block to achieving the future sixth generation (6G) wireless systems. The ultra-wide bandwidth and very narrow beamwidth of THz systems offer the next order of magnitude in user densities and multi-functional behavior. However, wide bandwidth results in a frequency-dependent beampattern causing the beams generated at different subcarriers split and point to different directions. Furthermore, mutual coupling degrades the system's performance. This paper studies the compensation of both beam-split and mutual coupling for direction-of-arrival (DoA) estimation by modeling the beam-split and mutual coupling as an array imperfection. We propose a subspace-based approach using multiple signal classification with CalibRated for bEAam-split and Mutual coupling (CREAM-MUSIC) algorithm for this purpose. Via numerical simulations, we show the proposed CREAM-MUSIC approach accurately estimates the DoAs in the presence of beam-split and mutual coupling.

eess.SP↗

arXiv2023

RIS-Assisted Wireless Communications: Long-Term versus Short-Term Phase Shift Designs

Reconfigurable intelligent surface (RIS) has recently gained significant interest as an emerging technology for future wireless networks thanks to its potential for improving the coverage probability in challenging propagation environments. This paper studies an RIS-assisted propagation environment, where a source transmits data to a destination in the presence of a weak direct link. We analyze and compare RIS designs based on long-term and short-term channel statistics in terms of coverage probability and ergodic rate. For the considered optimization designs, we derive closed-form expressions for the coverage probability and ergodic rate, which explicitly unveil the impact of both the propagation environment and the RIS on the system performance. Besides the optimization of the RIS phase profile, we formulate an RIS placement optimization problem with the aim of maximizing the coverage probability by relying only on partial channel state information. An efficient algorithm is proposed based on the gradient ascent method. Simulation results are illustrated in order to corroborate the analytical framework and findings. The proposed RIS phase profile is shown to outperform several heuristic benchmarks in terms of outage probability and ergodic rate. In addition, the proposed RIS placement strategy provides an extra degree of freedom that remarkably improves system performance.

cs.IT↗

arXiv2023

Energy-Efficient On-Board Radio Resource Management for Satellite Communications via Neuromorphic Computing

The latest satellite communication (SatCom) missions are characterized by a fully reconfigurable on-board software-defined payload, capable of adapting radio resources to the temporal and spatial variations of the system traffic. As pure optimization-based solutions have shown to be computationally tedious and to lack flexibility, machine learning (ML)-based methods have emerged as promising alternatives. We investigate the application of energy-efficient brain-inspired ML models for on-board radio resource management. Apart from software simulation, we report extensive experimental results leveraging the recently released Intel Loihi 2 chip. To benchmark the performance of the proposed model, we implement conventional convolutional neural networks (CNN) on a Xilinx Versal VCK5000, and provide a detailed comparison of accuracy, precision, recall, and energy efficiency for different traffic demands. Most notably, for relevant workloads, spiking neural networks (SNNs) implemented on Loihi 2 yield higher accuracy, while reducing power consumption by more than 100$\times$ as compared to the CNN-based reference platform. Our findings point to the significant potential of neuromorphic computing and SNNs in supporting on-board SatCom operations, paving the way for enhanced efficiency and sustainability in future SatCom systems.

eess.SY↗

arXiv2023

Signal Processing Based Antenna Pattern Characterization for MIMO Systems

Sophisticated antenna technologies are constantly evolving to meet the escalating data demands projected for 6G and future networks. The characterization of these emerging antenna systems poses challenges that necessitate a reevaluation of conventional techniques, which rely solely on simple measurements conducted in advanced anechoic chambers. In this study, our objective is to introduce a novel endeavour for antenna pattern characterization (APC) in next-generation multiple-input-multiple-output (MIMO) systems by utilizing the potential of signal processing tools. In contrast to traditional methods that struggle with multi-path scenarios and require specialized equipment for measurements, we endeavour to estimate the antenna pattern by exploiting information from both line-of-sight (LoS) and non-LoS contributions. This approach enables antenna pattern characterization in complex environments without the need for anechoic chambers, resulting in substantial cost savings. Furthermore, it grants a much wider research community the ability to independently perform APC for emerging complex 6G antenna systems, without relying on anechoic chambers. Simulation results demonstrate the efficacy of the proposed novel approach in accurately estimating the true antenna pattern.

eess.SP↗

arXiv2023

Adaptive Timers and Buffer Optimization for Layer-2 Protocols in 5G Non-Terrestrial Networks

Interest in the integration of Terrestrial Networks (TN) and Non-Terrestrial Networks (NTN); primarily satellites; has been rekindled due to the potential of NTN to provide ubiquitous coverage. Especially with the peculiar and flexible physical layer properties of 5G-NR, now direct access to 5G services through satellites could become possible. However, the large Round-Trip Delays (RTD) in NTNs require a re-evaluation of the design of RLC and PDCP layers timers ( and associated buffers), in particular for the regenerative payload satellites which have limited computational resources, and hence need to be optimally utilized. Our aim in this work is to initiate a new line of research for emerging NTNs with limited resources from a higher-layer perspective. To this end, we propose a novel and efficient method for optimally designing the RLC and PDCP layers' buffers and timers without the need for intensive computations. This approach is relevant for low-cost satellites, which have limited computational and energy resources. The simulation results show that the proposed methods can significantly improve the performance in terms of resource utilization and delays.

cs.NI↗

arXiv2023

Perpetual Reconfigurable Intelligent Surfaces Through In-Band Energy Harvesting: Architectures, Protocols, and Challenges

Reconfigurable intelligent surfaces (RISs) are considered to be a key enabler of highly energy-efficient 6G and beyond networks. This property arises from the absence of power amplifiers in the structure, in contrast to active nodes, such as small cells and relays. However, still an amount of power is required for their operation. To improve their energy efficiency further, we propose the notion of perpetual RISs, which secure the power needed to supply their functionalities through wireless energy harvesting of the impinging transmitted electromagnetic signals. Towards this, we initially explain the rationale behind such RIS capability and proceed with the presentation of the main RIS controller architecture that can realize this vision under an in-band energy harvesting consideration. Furthermore, we present a typical energy-harvesting architecture followed by two harvesting protocols. Subsequently, we study the performance of the two protocols under a typical communications scenario. Finally, we elaborate on the main research challenges governing the realization of large-scale networks with perpetual RISs.

cs.IT↗

arXiv2023

IRS Assisted MIMO Full Duplex: Rate Analysis and Beamforming Under Imperfect CSI

Intelligent reflecting surfaces (IRS) have emerged as a promising technology to enhance the performance of wireless communication systems. By actively manipulating the wireless propagation environment, IRS enables efficient signal transmission and reception. In recent years, the integration of IRS with full-duplex (FD) communication has garnered significant attention due to its potential to further improve spectral and energy efficiencies. IRS-assisted FD systems combine the benefits of both IRS and FD technologies, providing a powerful solution for the next generation of cellular systems. In this manuscript, we present a novel approach to jointly optimize active and passive beamforming in a multiple-input-multiple-output (MIMO) FD system assisted by an IRS for weighted sum rate (WSR) maximization. Given the inherent difficulty in obtaining perfect channel state information (CSI) in practical scenarios, we consider imperfect CSI and propose a statistically robust beamforming strategy to maximize the ergodic WSR. Additionally, we analyze the achievable WSR for an IRS-assisted MIMO FD system under imperfect CSI by deriving both the lower and upper bounds. To tackle the problem of ergodic WSR maximization, we employ the concept of expected weighted minimum mean squared error (EWMMSE), which exploits the information of the expected error covariance matrices and ensures convergence to a local optimum. We evaluate the effectiveness of our proposed design through extensive simulations. The results demonstrate that our robust approach yields significant performance improvements compared to the simplistic beamforming approach that disregards CSI errors, while also outperforming the robust half-duplex (HD) system considerably

eess.SP↗

arXiv2023

Robust Beamforming for IRS Aided MIMO Full Duplex Systems

In this paper, a novel robust beamforming for an intelligent reflecting surface (IRS) assisted FD system is presented. Since perfect channel state information (CSI) is often challenging to acquire in practice, we consider the case of imperfect CSI and adopt a statistically robust beamforming approach to maximize the ergodic weighted sum rate (WSR). We also analyze the achievable WSR of an IRS-assisted FD with imperfect CSI, for which the lower and the upper bounds are derived. The ergodic WSR maximization problem is tackled based on the expected Weighted Minimum Mean Squared Error (WMMSE), which is guaranteed to converge to a local optimum. The effectiveness of the proposed design is investigated with extensive simulation results. It is shown that our robust design achieves significant performance gain compared to the naive beamforming approaches and considerably outperforms the robust Half-Duplex (HD) system.

eess.SP↗

arXiv2023

Phase Shift Design for RIS-Aided Cell-Free Massive MIMO with Improved Differential Evolution

This paper proposes a novel phase shift design for cell-free massive multiple-input and multiple-output (MIMO) systems assisted by reconfigurable intelligent surface (RIS), which only utilizes channel statistics to achieve the uplink sum ergodic throughput maximization under spatial channel correlations. Due to the non-convexity and the scale of the derived optimization problem, we develop an improved version of the differential evolution (DE) algorithm. The proposed scheme is capable of providing high-quality solutions within reasonable computing time. Numerical results demonstrate superior improvements of the proposed phase shift designs over the other benchmarks, particularly in scenarios where direct links are highly probable.

cs.IT↗

arXiv2023

Joint Device Identification, Channel Estimation, and Signal Detection for LEO Satellite-Enabled Random Access

This paper investigates joint device identification, channel estimation, and signal detection for LEO satellite-enabled grant-free random access, where a multiple-input multipleoutput (MIMO) system with orthogonal time-frequency space modulation (OTFS) is utilized to combat the dynamics of the terrestrial-satellite link (TSL). We divide the receiver structure into three modules: first, a linear module for identifying active devices, which leverages the generalized approximate message passing (GAMP) algorithm to eliminate inter-user interference in the delay-Doppler domain; second, a non-linear module adopting the message passing algorithm to jointly estimate channel and detect transmit signals; the third aided by Markov random field (MRF) aims to explore the three dimensional block sparsity of channel in the delay-Doppler-angle domain. The soft information is exchanged iteratively between these three modules by careful scheduling. Furthermore, the expectation-maximization algorithm is embedded to learn the hyperparameters in prior distributions. Simulation results demonstrate that the proposed scheme outperforms the conventional methods significantly in terms of activity error rate, channel estimation accuracy, and symbol error rate.

cs.IT↗

arXiv2023

Performance of Joint Symbol Level Precoding and RIS Phase Shift Design in the Finite Block Length Regime with Constellation Rotation

In this paper, we tackle the problem of joint symbol level precoding (SLP) and reconfigurable intelligent surface (RIS) phase shift design with constellation rotation in the finite block length regime. We aim to increase energy efficiency by minimizing the total transmit power while satisfying the quality of service constraints. The total power consumption can be significantly minimized through the exploitation of multiuser interference by symbol level precoding and by the intelligent manipulation of the propagation environment using reconfigurable intelligent surfaces. In addition, the constellation rotation per user contributes to energy efficiency by aligning the symbol phases of the users, thus improving the utilization of constructive interference. The formulated power minimization problem is non-convex and correspondingly difficult to solve directly. Hence, we employ an alternating optimization algorithm to tackle the joint optimization of SLP and RIS phase shift design. The optimal phase of each user's constellation rotation is obtained via an exhaustive search algorithm. Through Monte-Carlo simulation results, we demonstrate that the proposed solution yields substantial power minimization as compared to conventional SLP, zero forcing precoding with RIS as well as the benchmark schemes without RIS.

cs.IT↗

arXiv2023

Reconfigurable Intelligent Surfaces Enhanced NOMA D2D Communications Underlaying UAV Networks

Device-to-device (D2D) communications offers high spectral efficiency, low energy consumption and transmission latency. However, one of the main limitations of D2D communications is co-channel interference from underlaying wireless system. Reconfigurable intelligent surfaces (RIS) is a promising technology because it can manipulate the electromagnetic waves in their environment to overcome interference and enhance wireless communications. This paper considers RIS enhanced D2D communications underlaying unmanned aerial vehicle (UAV) networks with non-orthogonal multiple access (NOMA). The objective is to maximize the sum rate of NOMA D2D communications by simultaneously optimizing the power budget of D2D transmitter, NOMA power allocation coefficients of D2D receivers and passive beamforming of RIS while guaranteeing the quality of services of UAV user. Due to non-convexity, the optimization problem is intractable and challenging to handle. Therefore, it is solved in two parts using alternating optimization. Simulation results unviel the performance of the proposed RIS enhanced D2D communications scheme. Results demonstrate that the proposed scheme achieves 15\% and 27\% higher sum rates compared to the fixed power D2D and orthogonal D2D schemes.

eess.SP↗

arXiv2023

A Hybrid Optimization and Deep RL Approach for Resource Allocation in Semi-GF NOMA Networks

Semi-grant-free non-orthogonal multiple access (semi-GF NOMA) has emerged as a promising technology for the fifth-generation new radio (5G-NR) networks supporting the coexistence of a large number of random connections with various quality of service requirements. However, implementing a semi-GF NOMA mechanism in 5G-NR networks with heterogeneous services has raised several resource management problems relating to unpredictable interference caused by the GF access strategy. To cope with this challenge, the paper develops a novel hybrid optimization and multi-agent deep (HOMAD) reinforcement learning-based resource allocation design to maximize the energy efficiency (EE) of semi-GF NOMA 5G-NR systems. In this design, a multi-agent deep Q network (MADQN) approach is employed to conduct the subchannel assignment (SA) among users. While optimization-based methods are utilized to optimize the transmission power for every SA setting. In addition, a full MADQN scheme conducting both SA and power allocation is also considered for comparison purposes. Simulation results show that the HOMAD approach outperforms other benchmarks significantly in terms of the convergence time and average EE.

eess.SP↗