arXiv subjects

Surender Kumar

Publications and source records attributed to Surender Kumar.

At least 19 recordsLinked to original sources

arXiv2026

Flexoelectric Polarization in Wrinkled Janus Transition-Metal Dichalcogenide Monolayers

Strain-gradient engineering via out-of-plane wrinkling offers a powerful route to tune electronic and electromechanical properties in two-dimensional (2D) materials. Here, we systematically investigate the electronic and flexoelectric response of wrinkled Janus MoSSe/MoSeS monolayers using density functional theory (DFT) calculations coupled with continuum elastica modeling. Exploring varying wrinkle sizes and compressive strain levels ($5\%-20\%$), we show that the global out-of-plane polarization follows a linear behavior when parameterized by the projected aspect ratio of the nanowrinkles. On this basis, we develop a physically grounded geometric model incorporating an effective 2D flexoelectric coefficient, which accurately predicts DFT polarizations without requiring higher-order nonlinear parameters. Atom- and orbital-resolved charge density analyses reveal the microscopic origin of this behavior: while the central Mo $4d$-orbital manifold acts as a robust, linear flexoelectric core, local curvature drives continuous, chemically asymmetric charge transfer between the S $3p$ and Se $4p$ sublayer manifolds. Our findings establish clear geometric design rules for harnessing Janus-based flexoelectricity for flexible nanoelectronics and optoelectronics.

cond-mat.mtrl-sci↗

arXiv2026

Linker Functionalization and pH Tuning Enhance Solar-Driven Catalytic CO$_2$ Reduction in MOF-5

The wide band gap of metal-organic framework (MOF) 5 constrains its use in photocatalytic carbon dioxide (CO$_2$) reduction despite its high porosity and favorable mass-transport properties. Adopting a state-of-the-art first-principles approach, we systematically investigate the effects of volumetric strain, metal-node substitution, linker functionalization, and pH control as knobs to improve the CO$_2$ photocatalytic ability of MOF-5. Strain and metal-node substitution negligibly affect the gap, whereas linker functionalization narrows it into the visible range via in-gap states while preserving reduction-side alignment at pH = 0. The resulting reduction energetics are strongly sensitive to both linker functionalization and pH. Halogenated and hydroxylated frameworks provide access primarily to HCOOH, CO, and HCHO under alkaline conditions, principally with the Mg and Zn nodes, whereas COOH functionalization offers the broadest thermodynamic accessibility across the full CO$_2$ reduction sequence. NH$_2$ retains thermodynamic feasibility for all target reduction pathways but with larger overpotentials, while NO$_2$ generally yields unfavorable reduction energetics. Crucially, within the COOH series, the choice of the metal node tunes the fundamental gap by over 1 eV with only minor changes in the reduction overpotentials, placing Sr- and Ba-based architectures as the most favorable ones for broad product selectivity with visible-light excitation. Linker functionalization substantially reduces the spatial overlap of the frontier states, promoting photoinduced charge separation. Taken together, these results establish linker functionalization and solution pH as complementary design levers for independently tuning light absorption and CO$_2$-reduction energetics in MOF-5, establishing a rational and viable route for designing efficient MOF-based photocatalysts.

cond-mat.mtrl-sci↗

arXiv2026

Multiscale Quasiparticle Electronic Structure and Excitonic Properties of CdSe Nanoclusters

Quantum confinement in stoichiometric $\mathrm{Cd}_n\mathrm{Se}_n$ nanoclusters dramatically attenuates electronic screening, driving a delicate, size-dependent competition between quasiparticle self-energy corrections ($\Delta_{\mathrm{QP}}$) and exciton binding energies ($E_b$). Here, we present a $GW$/BSE study across a representative size series ($n = 3, 6, 13, 33$) and leverage it to validate a scalable atomistic tight-binding (TB) framework derived from first principles. Our results demonstrate that 1-2 eV spectral blueshifts previously reported in the literature arise from single-particle $GW$ convergence artifacts rather than deficiencies in the electron--hole kernels. We show that the near-perfect cancellation between $\Delta_{\mathrm{QP}}$ and $E_b$ breaks down as cluster volume increases, driven by the rapid onset of dielectric screening attenuating $E_b$ faster than $\Delta_{\mathrm{QP}}$ and leading to a pronounced divergence from mean-field predictions. Spatial inverse participation ratio analysis of the electronic structure reveals that optical suppression of fundamental pre-peaks stems from a severe spatial mismatch between localized valence orbitals and delocalized conduction states. Finally, we demonstrate that the confinement-induced scaling of the quasiparticle gap and the optical onset is accurately reproduced by a scissor-corrected, DFT-parameterized TB model. As such, this work provides a quantitative multiscale roadmap for embedding effective many-body effects kernels into computationally efficient models, enabling reliable optical predictions for realistic semiconducting nanostructures containing up to thousands of atoms.

cond-mat.mtrl-sci↗

arXiv2026

Interface Symmetry and Electrostatic Stabilization of Strain-Resilient Janus Heterobilayers for Flexible Piezotronics

The electronic structure of conventional two-dimensional transition metal dichalcogenides (TMDs) is highly sensitive to lattice deformation, often leading to indirect-to-direct band-gap transitions that compromise performance in flexible nanoelectronic applications. Janus TMDs, with their broken mirror symmetry and intrinsic out-of-plane dipoles, offer a promising alternative platform for electrostatic tuning. However, their electronic stability under strain and the role of the chalcogen stacking sequence in their heterostructures remains poorly understood. Here, we study from first principles the strain tolerance and piezoelectric properties of MoSSe/WSSe heterobilayers. By examining different configurations, we demonstrate that the interface chemistry strongly modulates interlayer coupling, dynamic charge redistribution, and dipole interactions. Importantly, the combined effects of intrinsic electric fields and interface electrostatics effectively suppress the strain-induced band-gap transitions typical of conventional TMDs. Moreover, while the in-plane piezoelectric response remains nearly insensitive to the stacking order, the shear piezoelectric coefficient depends heavily on the interfacial symmetry and can be effectively tuned by strain modulation. Our results highlight interfacial engineering as a powerful route to design strain-resilient Janus heterostructures for next-generation flexible optoelectronic, valleytronic, and piezotronic devices.

cond-mat.mtrl-sci↗

arXiv2026

Semantic Retrieval for Product Search in E-Commerce

Semantic retrieval in e-commerce must handle short, noisy, and colloquial queries over large product catalogs with fine-grained attribute distinctions. We present a Siamese LLM dual-encoder trained through a two-stage pipeline: contrastive learning with a false-negative margin mask to prevent penalization of near-duplicate products, followed by Relative Odds Alignment for Retrieval (ROAR), a preference optimization objective that extends Bradley-Terry to variable-sized graded relevance groups via consecutive odds-ratio margins. The training corpus mirrors this progression - substitute query-product pairs provide coarse semantic supervision in Stage 1 and graded relevance annotations drive fine-grained ranking in Stage 2. The resulting system accurately retrieves exact matches while correctly ordering substitutes and complementary products, with gains confirmed across query-frequency strata and business verticals, and statistical significance validated through live A/B deployment at scale.

cs.IR↗

arXiv2026

Performance evaluation of Secure DSRC (S-DSRC) protocol for Vehicular Adhoc Networks

Vehicular adhoc networks (VANETs) provides communication between the vehicles like V2V and also provides communication between the Vehicles and the Road side Units. Recently, VANETs have greater scope in establishing interconnectivity between the vehicles on road and off road. These networks ensure the timely report of accidents happening in highways, alerting the nearest hospital, insurance claims if the vehicle is breakdown, etc. Vehicles often travels in highways lack the network connectivity, which then can be ensured through many technology implementations like 4G, 5G, LTE networks and protocols like IEEE 802.11p and DSRC were helpful in achieving the effectiveness of vehicular networks. In this paper, we have proposed a protocol Secure Dedicated Short-Range Communication (S-DSRC) protocol that can establish connectivity between the vehicles in a secure way. There will be a secret key, private kay and public key exchange between the vehicles so that the safety message can be sent to vehicles in a secure way. Our results show that S-DSRC protocol outperforms the existing DSRC protocol for a medium sized network.

cs.NI↗

arXiv2026

Janus MoSSe/WSSe Heterobilayers as Selective Photocatalysts for Water Splitting

Identifying materials that simultaneously straddle the water redox potentials and possess an intrinsic electric field is crucial for achieving high solar-to-hydrogen (STH) efficiency. Using state-of-the-art first-principles calculations, including a range-separated hybrid functional and spin-orbit coupling, we investigate MoXY/WXY (X, Y = S, Se) Janus bilayers for overall water splitting. We find a critical competition between the metal-to-metal chemical potential difference and the intrinsic dipoles at the interface between the Janus monolayers. We find that the Se-Se interfaced heterobilayer is intrinsically capable of driving water splitting, while its S-S counterpart can meet the redox requirements through pH modulation. For both configurations, a remarkable STH efficiency of 17.1% is anticipated. Furthermore, we predict a threshold of 1.0 eV for the built-in potential gradient to govern the transition from overall water splitting to band-edge pinning. Compared to homobilayers, heterobilayers benefit from the reciprocity between layer-specific dipoles and the Mo/W chemical potential difference, which promotes spatial separation and suppresses recombination, overall enhancing hydrogen production. Our results establish specific electronic descriptors for Janus heterostructures, providing a rational design rule for maximizing solar-driven hydrogen production in asymmetric two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2025

Atomistic Origin of Photoluminescence Quenching in Colloidal MoS2 and WS2 Nanoplatelets

Large chemical tunability and strong light-matter interactions make colloidal transition metal dichalcogenide (TMD) nanostructures particularly suitable for light-emitting applications. However, ultrafast exciton decay and quenched photoluminescence (PL) limit their potential. Combining femtosecond transient absorption spectroscopy with first-principles calculations on MoS2 and WS2 nanoplatelets, we reveal that the observed sub-picosecond exciton decay originates from edge-located optically bright hole traps. These intrinsic trap states stem from the metal d-orbitals and persist even when the sulfur-terminated edges are hydrogen-passivated. Notably, WS2 nanostructures show more localized and optically active edge states than their MoS2 counterparts, and zigzag edges exhibit a higher trap density than armchair edges. The nanoplatelet size dictates the competition between ultrafast edge-trapping and slower core-exciton recombination, and the states responsible for exciton quenching enhance catalytic activity. Our work represents an important step forward in understanding exciton quenching in TMD nanoplatelets and stimulates additional research to refine physicochemical protocols for enhanced PL.

cond-mat.mtrl-sci↗

arXiv2025

Edge Magnetism in Colloidal MoS2 Triangular Nanoflakes

The control of localized magnetic domains at the nanoscale holds great promise for next-generation spintronic applications. Colloidal transition metal dichalcogenides nanostructures are experimentally accessible and chemically tunable platforms for spintronics, deserving dedicated research to assess their potential. Here, we investigate from first principles free-standing triangular MoS2 nanoflakes with sulfur-terminated, hydrogen-passivated edges, to probe intrinsic spin behavior at varying side lengths. We find a critical edge length of approximately 1.5 nm separating nonmagnetic nanoflakes from larger ones with a magnetic ground state emerging from several, energetically competing spin configurations. In these systems, the magnetic activity is not uniformly distributed along the edges but localized on specific "magnetic islands" around molybdenum edge atoms. The localization of magnetic moments is robust even in non-equilateral nanoflake geometries, highlighting their intrinsic stability regardless of the (high) symmetry of the hosting structure. These findings establish that the S-terminated, H-passivated triangular MoS2 nanoflakes are a stable and experimentally accessible platform via colloidal synthesis for low-dimensional, next-generation spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

On the index of power compositional polynomials

The index of a monic irreducible polynomial $f(x)\in\mathbb{Z}[x]$ having a root $\theta$ is the index $[\mathbb{Z}_K:\mathbb{Z}[\theta]]$, where $\mathbb{Z}_K$ is the ring of algebraic integers of the number field $K=\mathbb{Q}(\theta)$. If $[\mathbb{Z}_K:\mathbb{Z}[\theta]]=1$, then $f(x)$ is monogenic. In this paper, we give necessary and sufficient conditions for a monic irreducible power compositional polynomial $f(x^k)$ belonging to $\mathbb{Z}[x]$, to be monogenic. As an application of our results, for a polynomial $f(x)=x^d+A\cdot h(x)\in\mathbb{Z}[x],$ with $d>1, \operatorname{deg} h(x)<d$ and $|h(0)|=1$, we prove that for each positive integer $k$ with $\operatorname{rad}(k)\mid \operatorname{rad}(A)$, the power compositional polynomial $f(x^k)$ is monogenic if and only if $f(x)$ is monogenic, provided that $f(x^k)$ is irreducible. At the end of the paper, we give infinite families of polynomials as examples.

math.NT↗

arXiv2024

Empirical Band-Gap Correction for LDA-Derived Atomic Effective Pseudopotentials

Atomic effective pseudopotentials enable atomistic calculations at the level of accuracy of density functional theory for semiconductor nanostructures with up to fifty thousand atoms. Since they are directly derived from ab-initio calculations performed in the local density approximation (LDA), they inherit the typical underestimated band gaps and effective masses. We propose an empirical correction based on the modification of the non-local part of the pseudopotential and demonstrate good performance for bulk binary materials (InP, ZnS, HgTe, GaAs) and quantum dots (InP, CdSe, GaAs) with diameters ranging from 1.0 nm to 4.45 nm. Additionally, we provide a simple analytic expression to obtain accurate quasiparticle and optical band gaps for InP, CdSe, and GaAs QDs, from standard LDA calculation.

cond-mat.mtrl-sci↗

arXiv2023

DISCRIMINANT and integral basis OF $\mathbb{Q}(\sqrt[12]{a})$

Suppose $m$ be a $12$-th power free integer. Let $K=\mathbb{Q}(\theta)$ be an algebraic number field defined by a complex root $\theta$ of an irreducible polynomial $x^{12}-m$ and $O_K$ be its ring of integers. In this paper, we determine the highest power of $p$ dividing the index of the subgroup $\Z[\theta]$ in $O_K$ and $p$-integral basis of $K$ for each prime $p$. These $p$-integral bases lead to the construction of an integral basis of $K$ which is illustrated with examples. In particular, when $m$ is a square free integer, we provide necessary and sufficient conditions for the set $\{1,\theta,\theta^2,\cdots,\theta^{10},\theta^{11}\}$ to be an integral basis of $K.$

math.NT↗

arXiv2023

On power basis of a class of number fields

Let $f(x)=x^n+ax^2+bx+c \in \Z[x]$ be an irreducible polynomial with $b^2=4ac$ and let $K=\Q(\theta)$ be an algebraic number field defined by a complex root $\theta$ of $f(x)$. Let $\Z_K$ deonote the ring of algebraic integers of $K$. The aim of this paper is to provide the necessary and sufficient conditions involving only $a,c$ and $n$ for a given prime $p$ to divide the index of the subgroup $\Z[\theta]$ in $\Z_K$. As a consequence, we provide families of monogenic algebraic number fields. Further, when $\Z_K \neq \Z[\theta]$, we determine explicitly the index $[\Z_K : \Z[\theta]]$ in some cases.

math.NT↗

arXiv2023

On common index divisor of the number fields defined by $x^7+ax+b$

Let $f(x)=x^7+ax+b$ be an irreducible polynomial having integer coefficients and $K=\mathbb{Q}(\theta)$ be an algebraic number field generated by a root $\theta$ of $f(x)$. In the present paper, for every rational prime $p$, our objective is to determine the necessary and sufficient conditions involving only $a,~b$ so that $p$ is a divisor of the index of the field $K$. In particular, we provide sufficient conditions on $a$ and $b$, for which $K$ is non-monogenic. In a special case, we show that if either $8$ divides both $a\pm1$, $b$ or $32$ divides both $a+4$, $b$, then $K$ is non-monogenic. We illustrate our results through examples.

math.NT↗

arXiv2020

Using Large Pretrained Language Models for Answering User Queries from Product Specifications

While buying a product from the e-commerce websites, customers generally have a plethora of questions. From the perspective of both the e-commerce service provider as well as the customers, there must be an effective question answering system to provide immediate answers to the user queries. While certain questions can only be answered after using the product, there are many questions which can be answered from the product specification itself. Our work takes a first step in this direction by finding out the relevant product specifications, that can help answering the user questions. We propose an approach to automatically create a training dataset for this problem. We utilize recently proposed XLNet and BERT architectures for this problem and find that they provide much better performance than the Siamese model, previously applied for this problem. Our model gives a good performance even when trained on one vertical and tested across different verticals.

cs.CL↗

arXiv2014

MEEP: Multihop Energy Efficient Protocol For Heterogeneous Wireless Sensor Network

Energy conservation of sensor nodes for increasing the network life is the most crucial design goal while developing efficient routing protocol for wireless sensor networks. Recent technological advances help in the development of wide variety of sensor nodes. Heterogeneity takes the advantage of different types of sensor nodes and improves the energy efficiency and network life. Generally sensors are deployed randomly and densely in a sensing region so short distance multihop communication reduces the long distance transmission in the sensor network. In this research paper MEEP (multihop energy efficient protocol for heterogeneous sensor network) is proposed. The proposed protocol combines the idea of clustering and multihop communication. Heterogeneity is created in the network by using some nodes of high energy. Low energy nodes use a residual energy based scheme to become a cluster head. High energy nodes act as the relay nodes for low energy cluster head when they are not performing the duty of a cluster head to save their energy further. Protocol also suggests a sleep state for nodes in the cluster formation process for saving energy and increasing the life of sensor network. Simulation result shows that the proposed scheme is better than other two level heterogeneous sensor network protocol like SEP in energy efficiency and network life.

cs.NI↗

arXiv2014

Distance based (DBCP) Cluster Protocol for Heterogeneous Wireless Sensor Network

Clustering is an important concept to reduce the energy consumption and prolonging the life of a wireless sensor network. In heterogeneous wireless sensor network some of the nodes are equipped with more energy than the other nodes. Many routing algorithms are proposed for heterogeneous wireless sensor network. Stable Election Protocol (SEP) is one of the important protocol in this category. In this research paper a novel energy efficient distance based cluster protocol (DBCP) is proposed for single hop heterogeneous wireless sensor network to increase the life and energy efficiency of a sensor network. DBCP use the average distance of the sensor from the base station as the major issue for the selection of a cluster head in the sensor network.

cs.NI↗

arXiv2014

Energy Efficient (EECP) Clustered Protocol for Heterogeneous Wireless Sensor Network

Energy Conservation and prolonging the life of Wireless Sensor Network is one of the major issues in the wireless sensor network as sensor nodes are highly energy constrained devices. Many routing protocols have been proposed for sensor network, especially cluster based routing protocols. Cluster based routing protocols are best known for its energy efficiency, network stability and for increasing the life time of the sensor network. Low Energy Adaptive Clustering Hierarchy (LEACH) is one of the fundamental protocols in this class. In this research paper we propose a new energy efficient cluster based protocol (EECP) for single hop heterogeneous wireless sensor network to increase the life of a sensor network. Our sensor protocol use the distance of the sensor from the sink as the major issue for the selection of a cluster in the sensor network.

cs.NI↗