arXiv subjects

Sumit Kumar

Publications and source records attributed to Sumit Kumar.

At least 73 records · Page 4Linked to original sources

arXiv2024

On various notions of distance between subalgebras of operator algebras

Given any irreducible inclusion $\mB \subset \mA$ of unital $C^*$-algebras with a finite-index conditional expectation $E: \mA \to \mB$, we show that the set of $E$-compatible intermediate $C^*$-subalgebras is finite, thereby generalizing a finiteness result of Ino and Watatani (from \cite{IW}). A finiteness result for a certain collection of intermediate $C^*$-subalgebras of a non-irreducible inclusion of simple unital $C^*$-algebras is also obtained, which provides a $C^*$-version of a finiteness result of Khoshkam and Mashood (from \cite{KM}). Apart from these finiteness results, comparisons between various notions of distance between subalgebras of operator algebras by Kadison-Kastler, Christensen and Mashood-Taylor are made. Further, these comparisons are used satisfactorily to provide some concrete calculations of distance between operator algebras associated to two distinct subgroups of a given discrete group.

math.OA↗

arXiv2024

Blind spots and biases: the dangers of ignoring eccentricity in gravitational-wave signals from binary black holes

Most gravitational wave (GW) events observed by the LIGO and Virgo detectors are consistent with mergers of binary black holes (BBHs) on quasi-circular orbits. However, some events are also consistent with non-zero orbital eccentricity, which can indicate that the binary formed via dynamical interactions. Active GW search pipelines using quasi-circular waveform templates are inefficient for detecting eccentric mergers. Also, analysing eccentric GW signals with waveform models neglecting eccentricity can lead to biases in the recovered parameters. We explore the detectability and characterisation of eccentric signals when searches and analyses rely on quasi-circular waveform models. We find that for a reference eccentric population, the fraction of events having fitting factor (FF) $< 0.95$ can be up to $\approx 2.2\%$ compared to $\approx 0.4\%$ for the baseline population. This leads to the loss in signal recovery fraction for up to $6\%$ for parameter space with non-negligible eccentricity ($e_{10} > 0.01$) and high mass ratio ($q > 3$). We perform parameter estimation (PE) for non-spinning and aligned-spin eccentric GW injections from BBHs with a total mass $M=35 M_\odot$, based on numerical relativity simulations and an EOB based inspiral-merger-ringdown model (TEOBResumS). We recover these injections using both quasi-circular and eccentric waveform models. For cases with $e_{20} \sim 0.1$, quasi-circular models fail to estimate chirp mass within the 90% credible interval accurately. Further, for these low-mass injections, spin-induced precession does not mimic eccentricity. For injections of $e_{20}\sim 0.1$, PE conducted with an inspiral-only eccentric waveform model correctly characterises the injected signal to within 90% confidence, and recovers the injected eccentricities, suggesting that such models are sufficient for characterisation of low-mass eccentric BBH. (abridged)

gr-qc↗

arXiv2024

COPS: A Compact On-device Pipeline for real-time Smishing detection

Smartphones have become indispensable in our daily lives and can do almost everything, from communication to online shopping. However, with the increased usage, cybercrime aimed at mobile devices is rocketing. Smishing attacks, in particular, have observed a significant upsurge in recent years. This problem is further exacerbated by the perpetrator creating new deceptive websites daily, with an average life cycle of under 15 hours. This renders the standard practice of keeping a database of malicious URLs ineffective. To this end, we propose a novel on-device pipeline: COPS that intelligently identifies features of fraudulent messages and URLs to alert the user in real-time. COPS is a lightweight pipeline with a detection module based on the Disentangled Variational Autoencoder of size 3.46MB for smishing and URL phishing detection, and we benchmark it on open datasets. We achieve an accuracy of 98.15% and 99.5%, respectively, for both tasks, with a false negative and false positive rate of a mere 0.037 and 0.015, outperforming previous works with the added advantage of ensuring real-time alerts on resource-constrained devices.

cs.CR↗

arXiv2024

Optomechanically Induced Transparency/Absorption in a 3D Microwave Cavity Architecture at Ambient Temperature

Leveraging advancements in cavity optomechanics, we explore Optomechanically Induced Transparency/Absorption (OMIT/OMIA) in the microwave domain at ambient temperature. Contrary to previous works employing cryogenic temperatures, this work exploits a 3D microwave cavity architecture to observe these effects at ambient temperature, broadening the scope of possible applications. The work successfully enhances the optomechanical coupling strength, enabling observable and robust OMIT/OMIA effects, and demonstrating up to 25 dB in signal amplification and 20 dB in attenuation. Operating in the unresolved sideband regime enables tunability across a wider frequency range, enhancing the system's applicability in signal processing and sensing. The findings herein highlight the potential of optomechanical systems, presenting a simplified, cost-effective, and more feasible approach for applications at ambient temperature.

physics.app-ph↗

arXiv2024

Constraints on cosmologically coupled black holes from gravitational wave observations and minimal formation mass

We test the possibility that the black holes (BHs) detected by LIGO-Virgo-KAGRA (LVK) may be cosmologically coupled and grow in mass proportionally to the cosmological scale factor to some power $k$, which may also act as the dark energy source if $k\approx 3$. This approach was proposed as an extension of Kerr BHs embedded in cosmological backgrounds and possibly without singularities or horizons. In our analysis, we develop and apply two methods to test these cosmologically coupled BHs (CCBHs) either with or without connection to dark energy. We consider different scenarios for the time between the binary BH formation and its merger, and we find that the standard log-uniform distribution yields weaker constraints than the CCBH-corrected case. Assuming that the minimum mass of a BH with stellar progenitor is $2M_\odot$, we estimate the probability that at least one BH among the observed ones had an initial mass below this threshold. We obtain these probabilities either directly from the observed data or by assuming the LVK power-law-plus-peak mass distribution. In the latter case we find, at $2σ$ level, that $k < 2.1$ for the standard log-uniform distribution, or $k < 1.1$ for the CCBH-corrected distribution. Slightly weaker bounds are obtained in the direct method. Considering the uncertainties on the nature of CCBHs, we also find that the required minimum CCBH mass value to eliminate the tensions for $k=3$ should be lower than 0.5 $M_\odot$ (again at 2$σ$). Finally, we show that future observations have the potential to decisively confirm these bounds.

astro-ph.CO↗

arXiv2023

Resource-Efficient Quantum Circuits for Molecular Simulations: A Case Study of Umbrella Inversion in Ammonia

We conducted a thorough evaluation of various state-of-the-art strategies to prepare the ground state wavefunction of a system on a quantum computer, specifically within the framework of variational quantum eigensolver (VQE). Despite the advantages of VQE and its variants, the current quantum computational chemistry calculations often provide inaccurate results for larger molecules, mainly due to the polynomial growth in the depth of quantum circuits and the number of two-qubit gates, such as CNOT gates. To alleviate this problem, we aim to design efficient quantum circuits that would outperform the existing ones on the current noisy quantum devices. In this study, we designed a novel quantum circuit that reduces the required circuit depth and number of two-qubit entangling gates by about 60%, while retaining the accuracy of the ground state energies close to the chemical accuracy. Moreover, even in the presence of device noise, these novel shallower circuits yielded substantially low error rates than the existing approaches for predicting the ground state energies of molecules. By considering the umbrella inversion process in ammonia molecule as an example, we demonstrated the advantages of this new approach and estimated the energy barrier for the inversion process.

quant-ph↗

arXiv2023

Probing Cosmology with Baryon Acoustic Oscillations using Gravitational Waves

The third-generation (3G) gravitational wave (GW) detectors such as the Einstein telescope (ET) or Cosmic Explorer (CE) are expected to play an important role in cosmology. With the help of 3G detectors, we will be able to probe large-scale structure (LSS) features such as baryon acoustic oscillations (BAO), galaxy bias, etc. We explore the possibility to do precision cosmology, with the 3G GW detectors by measuring the angular BAO scale using localization volumes of compact binary merger events. Through simulations, we show that with a 3G detector network, by probing the angular BAO scale using purely GW observations, we can constrain the Hubble constant for the standard model of cosmology ($Λ$CDM) with $90\%$ credible regions as $H_0 = 59.4^{+ 33.9}_{-17.7} ~\mathrm{km}~\mathrm{s}^{-1}~\mathrm{Mpc}^{-1}$. When combined with BAO measurements from galaxy surveys, we show that it can be used to constrain various models of cosmology such as parametrized models for dark energy equations of state. We also show how cosmological constraints using BAO measurements from GW observations in the 3G era will complement the same from spectroscopic surveys.

astro-ph.CO↗

arXiv2023

Probing the large scale structure using gravitational-wave observations of binary black holes

Third generation gravitational-wave (GW) detectors are expected to detect a large number of binary black holes (BBHs) to large redshifts, opening up an independent probe of the large scale structure using their clustering. This probe will be complementary to the probes using galaxy clustering -- GW events could be observed up to very large redshifts ($z \sim 10$) although the source localization will be much poorer at large distances ($\sim$ tens of square degrees). We explore the possibility of probing the large scale structure from the spatial distribution of the observed BBH population, using their two-point (auto)correlation function. We find that we can estimate the bias factor of population of BBH (up to $z \sim 0.7$) with a few years of observations with these detectors. Our method relies solely on the source-location posteriors obtained from the GW events and does not require any information from electromagnetic observations. This will help in identifying the type of galaxies that host the BBH population, thus shedding light on their origins.

astro-ph.CO↗

arXiv2023

Moments of derivatives of modular $L$-functions

Let $f$ be an Hecke eigenform for the group $Γ_{0}(q)$ and $χ_{d}$ be a primitive quadratic character of conductor $|d|$. In this article, we prove an asymptotic for the second moment of the derivative of $L(s, f \otimes χ_{8d})$ at the central point $1/2$, which was previously known under GRH by Petrow \cite{petrow}.

math.NT↗

arXiv2023

Quantum scattering cross sections of O($^3P$) + N$_2$ collisions for planetary aeronomy

"Hot atoms", which are atoms in their excited states, transfer their energy to the surrounding atmosphere through collisions. This process of energy transfer is known as thermalization, and it plays a crucial role in various astrophysical and atmospheric processes. Thermalization of hot atoms is mainly governed by the amount of species present in the surrounding atmosphere and the collision cross-section between the hot atoms and surrounding species. In this work, we investigated the elastic and inelastic collisions between hot oxygen atoms and neutral N$_2$ molecules, relevant to oxygen gas escape from the martian atmosphere and for characterizing the chemical reactions in hypersonic flows. We conducted a series of quantum scattering calculations between various isotopes of O($^3P$) atoms and N$_2$ molecules across a range of collision energies (0.3 to 4 eV), and computed both their differential and collision cross-sections using quantum time$-$independent coupled-channel approach. Our differential cross-section results indicate a strong preference for forward scattering over sideways or backward scattering, and this anisotropy in scattering is further pronounced at higher collision energies. By comparing the cross-sections of three oxygen isotopes, we find that the heavier isotopes consistently have larger collision cross-sections than the lighter isotopes over the entire collision energy range examined. However, for all the isotopes, the variation of collision cross-section with respect to collision energy is the same. As a whole, the present study contributes to a better understanding of the energy distribution and thermalization processes of hot atoms within atmospheric environments. Specifically, the cross$-$sectional data presented in this work is directly useful in improving the accuracy of energy relaxation modeling of O and N$_2$ collisions over Mars and Venus atmospheres.

astro-ph.EP↗

arXiv2023

ML-based PBCH symbol detection and equalization for 5G Non-Terrestrial Networks

This paper delves into the application of Machine Learning (ML) techniques in the realm of 5G Non-Terrestrial Networks (5G-NTN), particularly focusing on symbol detection and equalization for the Physical Broadcast Channel (PBCH). As 5G-NTN gains prominence within the 3GPP ecosystem, ML offers significant potential to enhance wireless communication performance. To investigate these possibilities, we present ML-based models trained with both synthetic and real data from a real 5G over-the-satellite testbed. Our analysis includes examining the performance of these models under various Signal-to-Noise Ratio (SNR) scenarios and evaluating their effectiveness in symbol enhancement and channel equalization tasks. The results highlight the ML performance in controlled settings and their adaptability to real-world challenges, shedding light on the potential benefits of the application of ML in 5G-NTN.

eess.SP↗

arXiv2023

WEARS: Wearable Emotion AI with Real-time Sensor data

Emotion prediction is the field of study to understand human emotions. Existing methods focus on modalities like text, audio, facial expressions, etc., which could be private to the user. Emotion can be derived from the subject's psychological data as well. Various approaches that employ combinations of physiological sensors for emotion recognition have been proposed. Yet, not all sensors are simple to use and handy for individuals in their daily lives. Thus, we propose a system to predict user emotion using smartwatch sensors. We design a framework to collect ground truth in real-time utilizing a mix of English and regional language-based videos to invoke emotions in participants and collect the data. Further, we modeled the problem as binary classification due to the limited dataset size and experimented with multiple machine-learning models. We also did an ablation study to understand the impact of features including Heart Rate, Accelerometer, and Gyroscope sensor data on mood. From the experimental results, Multi-Layer Perceptron has shown a maximum accuracy of 93.75 percent for pleasant-unpleasant (high/low valence classification) moods.

eess.SP↗

arXiv2023

Nitrogen-Doped Ti$_3$C$_2$T$_x$ Coated with a Molecularly Imprinted Polymer as Efficient Cathode Material for Lithium-Sulfur Batteries

Due to their high energy density (2600 Wh/kg), low cost, and low environmental impact, lithium-sulfur batteries are considered a promising alternative to lithium-ion batteries. However, their commercial viability remains a formidable scientific challenge mainly because of the sluggish reaction kinetics at the cathode and the so-called "shuttling effect" of soluble polysulfides, which results in capacity decay and a shortened lifespan. Herein, molecular imprinting with Li$_2$S$_8$ as a target molecule in combination with a two-dimensional material, MXene, is proposed to overcome these issues. Molecularly imprinted polymer-coated nitrogen-doped Ti-based MXene was successfully synthesized and demonstrated to exhibit an appealing electrochemical performance, namely a high specific capacity of 1095 mAh/g at 0.1 C and an extended cycling stability (300 mAh/g at 1.0 C after 300 cycles). X-ray photoelectron spectroscopy was applied to elucidate the underlying mechanisms and proved that Li$_2$S$_8$-imprinted polymer polyacrylamide serves as a polysulfide trap through strong chemical affinity towards the long-chain lithium polysulfides, while N-doped Ti-based MXene promotes the redox kinetics by accelerating the conversion of lithium polysulfides. This distinct interfacial strategy is expected to result in more effective and stable Li-S batteries.

physics.chem-ph↗

arXiv2023

Adaptive Timers and Buffer Optimization for Layer-2 Protocols in 5G Non-Terrestrial Networks

Interest in the integration of Terrestrial Networks (TN) and Non-Terrestrial Networks (NTN); primarily satellites; has been rekindled due to the potential of NTN to provide ubiquitous coverage. Especially with the peculiar and flexible physical layer properties of 5G-NR, now direct access to 5G services through satellites could become possible. However, the large Round-Trip Delays (RTD) in NTNs require a re-evaluation of the design of RLC and PDCP layers timers ( and associated buffers), in particular for the regenerative payload satellites which have limited computational resources, and hence need to be optimally utilized. Our aim in this work is to initiate a new line of research for emerging NTNs with limited resources from a higher-layer perspective. To this end, we propose a novel and efficient method for optimally designing the RLC and PDCP layers' buffers and timers without the need for intensive computations. This approach is relevant for low-cost satellites, which have limited computational and energy resources. The simulation results show that the proposed methods can significantly improve the performance in terms of resource utilization and delays.

cs.NI↗

arXiv2023

IRS Assisted MIMO Full Duplex: Rate Analysis and Beamforming Under Imperfect CSI

Intelligent reflecting surfaces (IRS) have emerged as a promising technology to enhance the performance of wireless communication systems. By actively manipulating the wireless propagation environment, IRS enables efficient signal transmission and reception. In recent years, the integration of IRS with full-duplex (FD) communication has garnered significant attention due to its potential to further improve spectral and energy efficiencies. IRS-assisted FD systems combine the benefits of both IRS and FD technologies, providing a powerful solution for the next generation of cellular systems. In this manuscript, we present a novel approach to jointly optimize active and passive beamforming in a multiple-input-multiple-output (MIMO) FD system assisted by an IRS for weighted sum rate (WSR) maximization. Given the inherent difficulty in obtaining perfect channel state information (CSI) in practical scenarios, we consider imperfect CSI and propose a statistically robust beamforming strategy to maximize the ergodic WSR. Additionally, we analyze the achievable WSR for an IRS-assisted MIMO FD system under imperfect CSI by deriving both the lower and upper bounds. To tackle the problem of ergodic WSR maximization, we employ the concept of expected weighted minimum mean squared error (EWMMSE), which exploits the information of the expected error covariance matrices and ensures convergence to a local optimum. We evaluate the effectiveness of our proposed design through extensive simulations. The results demonstrate that our robust approach yields significant performance improvements compared to the simplistic beamforming approach that disregards CSI errors, while also outperforming the robust half-duplex (HD) system considerably

eess.SP↗

arXiv2023

Robust Beamforming for IRS Aided MIMO Full Duplex Systems

In this paper, a novel robust beamforming for an intelligent reflecting surface (IRS) assisted FD system is presented. Since perfect channel state information (CSI) is often challenging to acquire in practice, we consider the case of imperfect CSI and adopt a statistically robust beamforming approach to maximize the ergodic weighted sum rate (WSR). We also analyze the achievable WSR of an IRS-assisted FD with imperfect CSI, for which the lower and the upper bounds are derived. The ergodic WSR maximization problem is tackled based on the expected Weighted Minimum Mean Squared Error (WMMSE), which is guaranteed to converge to a local optimum. The effectiveness of the proposed design is investigated with extensive simulation results. It is shown that our robust design achieves significant performance gain compared to the naive beamforming approaches and considerably outperforms the robust Half-Duplex (HD) system.

eess.SP↗

arXiv2023

An Embedded Auto-Calibrated Offset Current Compensation Technique for PPG/fNIRS System

Usually, the current generated by the photodiode proportional to the oxygenated blood in the photoplethysmography (PPG) and functional infrared spectroscopy (fNIRS) based recording systems is small as compared to the offset-current. The offset current is the combination of the dark current of the photodiode, the current due to ambient light, and the current due to the reflected light from fat and skull . The relatively large value of the offset current limits the amplification of the signal current and affects the overall performance of the PPG/fNIRS recording systems. In this paper, we present a mixed-signal auto-calibrated offset current compensation technique for PPG and fNIRS recording systems. The system auto-calibrates the offset current, compensates using a dual discrete loop technique, and amplifies the signal current. Thanks to the amplification, the system provides better sensitivity. A prototype of the system is built and tested for PPG signal recording. The prototype is developed for a 3.3 V single supply. The results show that the proposed system is able to effectively compensate for the offset current.

eess.SY↗

arXiv2023

SeLiNet: Sentiment enriched Lightweight Network for Emotion Recognition in Images

In this paper, we propose a sentiment-enriched lightweight network SeLiNet and an end-to-end on-device pipeline for contextual emotion recognition in images. SeLiNet model consists of body feature extractor, image aesthetics feature extractor, and learning-based fusion network which jointly estimates discrete emotion and human sentiments tasks. On the EMOTIC dataset, the proposed approach achieves an Average Precision (AP) score of 27.17 in comparison to the baseline AP score of 27.38 while reducing the model size by >85%. In addition, we report an on-device AP score of 26.42 with reduction in model size by >93% when compared to the baseline.

cs.CV↗