arXiv subjects

Subha Maity

Publications and source records attributed to Subha Maity.

At least 19 recordsLinked to original sources

arXiv2026

Structural and Optical Properties of PVP-Modified ZnS Nanoparticles for Photocatalytic Dye Degradation

Pristine and PVP-modified ZnS nanoparticles were investigated to examine how PVP addition affects structural, surface, optical, and methylene blue (MB) decolorization properties. X-ray diffraction confirmed cubic zinc-blende ZnS in all samples, with apparent Scherrer coherent-domain sizes of 3.10-3.31 nm. Electron microscopy revealed agglomeration, while HRTEM and electron diffraction confirmed locally crystalline regions in S1 and S4. The estimated direct Tauc gap decreased from 3.69 eV for S1 to 3.58 eV for S4. Between 100 and 300 K, the principal TO-like Raman band softened on heating, while visible photoluminescence changed predominantly within the overlapping green-yellow region. After 210 min under 254 nm irradiation, MB-band losses near 664 nm reached 19.33%, 58.18%, 70.00%, and 94.42% for S1-S4, compared with 6.58% for the catalyst-free control. PVP modification therefore alters optical and dye-decolorization responses while preserving the principal ZnS phase; however, dye-band attenuation alone does not establish complete mineralization.

cond-mat.mtrl-sci↗

arXiv2026

Investigation of the Microstructural and Magnetic Properties of Ni on GeSn Layers

Thermal processing of nickel (Ni) layers on germanium-tin (GeSn) can strongly modify the Ni film and the Ni/GeSn interface within a restricted thermal budget; however, the influence of GeSn crystalline quality on Ni-Ge-Sn interfacial evolution and the magnetic response of the Ni layer remains incompletely understood. Here, Ni (15~nm)/Ge$_{1-x}$Sn$_x$/Ge/Gd$_2$O$_3$/Si(111) heterostructures ($x = 0.08$ and $0.10$) were investigated following rapid thermal annealing at 573 and 973~K for 10~s using X-ray diffraction, pole-figure analysis, X-ray photoelectron spectroscopy depth profiling, and temperature- and field-dependent magnetization measurements. Annealing at 573~K preserves the crystallographic texture of Ge$_{0.92}$Sn$_{0.08}$, whereas Ge$_{0.90}$Sn$_{0.10}$ exhibits microtwin formation and reduced structural integrity. Annealing at 973~K, employed as a severe upper-bound thermal reference, causes extensive structural degradation in both heterostructures, with substantially greater deterioration in the higher-Sn sample. XPS depth profiling reveals progressive Ni-Ge-Sn intermixing accompanied by pronounced Sn surface segregation with increasing annealing temperature. Magnetization measurements show coexisting ferromagnetic and superparamagnetic contributions in the as-deposited and 573~K samples, whereas annealing at 973~K strongly suppresses the ferromagnetic response, producing highly unsaturated $M(H)$ loops together with reduced saturation magnetization and coercivity. These magnetic changes are consistent with extensive interfacial alloying and dilution of the metallic Ni layer. This study establishes a direct correlation between GeSn crystalline quality, interfacial diffusion, and magnetic behavior.

cond-mat.mtrl-sci↗

arXiv2026

Co layer Thickness Driven Structural Evolution and Magnetic Behaviour of Co/Ir/Co Trilayers

Ferromagnetic heavy-metal (FM/HM) trilayer heterostructures provide a versatile platform for investigating the interplay between structural and magnetic properties. In this study, we investigate the effect of Co-layer thickness on the structural and magnetic properties of sputter-deposited $\mathrm{Co}(t_{\mathrm{Co}})/\mathrm{Ir}(5\,\mathrm{nm})/\mathrm{Co}(t_{\mathrm{Co}})$ varying from 2 to 10 nm. Structural characterization using grazing-incidence X-ray diffraction (GIXRD) and high-resolution transmission electron microscopy (HRTEM) reveals a nanocrystalline structure, with the crystallite size increasing with Co-layer thickness. Furthermore, X-ray reflectivity (XRR) reveals a thickness-dependent variation in interface morphology, with the interface roughness ratio reaching a maximum at $t_{\mathrm{Co}} = 4$ nm. Temperature-dependent zero-field-cooled and field-cooled (ZFC-FC) magnetization measurements reveal thickness-dependent characteristic temperatures and multiple relaxation regimes in selected samples, indicating complex thermally activated magnetic behaviour. In contrast, field-dependent hysteresis measurements reveal that the saturation magnetization increases with Co-layer thickness, whereas the coercivity exhibits a pronounced non-monotonic variation, with enhanced values at intermediate thicknesses. Moreover, low-temperature hysteresis loops display thickness-dependent exchange-bias-like shifts, particularly for $t_{\mathrm{Co}} = 2$-$4$ nm. These findings highlight the strong influence of Co-layer thickness on the structural and magnetic properties of Co/Ir/Co trilayers.

cond-mat.mtrl-sci↗

arXiv2026

Perpendicular Anisotropy and g-Factor of Sputtered Ni Films on Si(111) Studied by Angle-Dependent Ferromagnetic Resonance

Ni films with thicknesses of 312 and 1011\,Å were grown on Si(111) by dc magnetron sputtering at room temperature and studied by atomic force microscopy, grazing-incidence X-ray diffraction, X-ray reflectivity, magnetometry and angle-dependent ferromagnetic resonance. Both films are polycrystalline fcc Ni with smooth surfaces, a bulk-like (111) lattice spacing and a saturation magnetization of ${\approx}480$\,emu\,cm$^{-3}$, and both are magnetized in plane. The angular dependence of the resonance field, from the film plane to the film normal, is described by a uniaxial anisotropy model with first- and second-order terms. From this model, $g = 2.160\pm0.005$ and $2.101\pm0.014$ and effective perpendicular anisotropies of $(6.0\pm0.4)\times10^{5}$ and $(4.5\pm0.6)\times10^{5}$\,erg\,cm$^{-3}$ were obtained for the thinner and thicker film, respectively. The conventional analysis of only the in-plane and perpendicular resonances gives $g$-factors that are lower by 0.02--0.04. The perpendicular linewidths give upper limits for the Gilbert damping of $α\le 0.030$ and $\le 0.038$.

cond-mat.mes-hall↗

arXiv2026

Magnetic Anisotropy and Magnetization Dynamics in Si/Ni Multilayers Probed by FMR and VSM Magnetometry

The magnetic anisotropy and magnetization dynamics of sputtered [Si(40~Å)/Ni($t_{\mathrm{Ni}}$~Å)]$_{20}$ multilayers were systematically investigated at room temperature using SQUID--VSM magnetometry and angle-dependent ferromagnetic resonance (FMR). Static measurements reveal soft ferromagnetic behaviour in thicker Ni layers and mixed ferromagnetic and superparamagnetic contributions at reduced thicknesses. The saturation magnetization increases toward the bulk Ni value with increasing thickness, consistent with Ni nanocrystallite growth. Magnetic dead-layer analysis yields an interfacial dead-layer thickness of approximately $9$~Å per interface, accounting for the suppressed magnetization in thinner Ni layers. Angle-dependent FMR measurements reveal effective easy-plane magnetic anisotropy, while out-of-plane spectra exhibit additional non-uniform spin-wave modes. The effective magnetization remains lower than the static saturation magnetization, indicating a perpendicular anisotropy contribution that partially compensates the demagnetizing field. Quantitative anisotropy analysis yields an interfacial anisotropy constant of $K_S = +0.17~\mathrm{erg\,cm^{-2}}$, favouring perpendicular magnetization, and a volume anisotropy constant of $K_V = -1.23 \times 10^6~\mathrm{erg\,cm^{-3}}$, favouring in-plane alignment, with an extrapolated anisotropy crossover thickness of $t_c \approx 27$~Å. Increasing FMR line-shape asymmetry with decreasing Ni thickness is consistent with enhanced interfacial roughness. These findings highlight the competing interfacial and volume anisotropies and the importance of Ni thickness and interface quality in tailoring Si/Ni multilayers for silicon-compatible spintronic applications.

cond-mat.mes-hall↗

arXiv2026

Phonon evidence for a partial, re-entrant spin reorientation near room temperature in LaFe$_{1-x}$Ni$_x$O$_3$

Spin reorientation near room temperature offers a route to controlling antiferromagnetic order, yet LaFeO$3$, which lacks a magnetic rare-earth ion, is generally expected to retain its spin orientation along the $a$ axis below $T{\mathrm N}\approx740$~K. Here, we investigate LaFe$_{1-x}$Ni$_x$O$_3$ ($x=0$ and 0.1) using temperature-dependent magnetization and Raman spectroscopy over 200--400~K. Both compositions exhibit magnetic anomalies at 285.6 and 323~K, respectively, accompanied by correlated deviations of 12 Raman modes from their conventional anharmonic behavior. Principal component analysis and a global fitting approach reveal a common temperature-dependent phonon response, with mode-dependent amplitudes and signs. To interpret these anomalies, we develop a Landau-based spin-phonon coupling model describing complete, partial re-entrant, and incipient spin reorientation. Comparison with the experimental Raman profiles favors a partial, re-entrant rotation of the N'eel vector in both compositions, centered near 290~K. Ni substitution narrows the characteristic reorientation interval from approximately 116 to 84~K and enhances the magnetization anomaly by a factor of four. An additional feature near 262~K in LaFeO$_3$ is consistent with the Morin transition of trace $α$-Fe$_2$O$_3$. These findings suggest that partial spin reorientation can emerge without magnetic rare-earth ions and establish collective Raman phonon anomalies as a sensitive indirect probe of magnetic anisotropy changes in orthoferrites.

cond-mat.mtrl-sci↗

arXiv2026

Robust inference for risk heterogeneity under group imbalance

Population-level heterogeneity is ubiquitous in biomedical data, where differences across demographic or clinical subgroups can substantially alter risk patterns. For example, in intensive care unit (ICU) studies, the mortality risk associated with specific admission diagnoses can vary across ethnic groups. Existing approaches for detecting risk heterogeneity are often sensitive to baseline model misspecification and regularization bias, both of which commonly arise in practice. In this paper, we propose a robust framework for inferring risk heterogeneity between two populations using Neyman orthogonality, which yields estimators that are locally insensitive to nuisance parameter estimation error. The proposed estimator is consistent and asymptotically normal, and simulation studies demonstrate that in finite samples our method substantially reduces bias and improves inferential stability compared with standard likelihood-based approaches. In an application to the eICU Collaborative Research Database, our method reveals clinically meaningful ethnicity-specific heterogeneity in admission diagnoses for in-hospital mortality that standard likelihood-based methods fail to detect.

stat.ME↗

arXiv2026

Investigation on Thermal Stability of Epi-GeSn Directly on Si (001)

In this paper we investigate the structural properties and thermal stability of metastable Ge1-xSnx epilayers (~4.5 at.% Sn) grown directly on Si(001) substrates by high-resolution X-ray diffraction (HRXRD) and Raman spectroscopy. Our results demonstrate that both 70 and 140 nm films are fully relaxed, with the thicker film exhibiting a small tensile strain (+0.09%). The thermal stability of the heterostructures was evaluated up to 813 K using temperature-dependent Raman spectroscopy and scanning electron microscopy. The surface-weighted Raman response (532 nm excitation) and surface morphology of the 70 nm film remain highly stable. In contrast, the 140 nm film undergoes severe degradation, characterized by significant attenuation and broadening of the Ge-Ge longitudinal optical phonon mode, alongside enhanced surface Sn segregation. These findings demonstrate that the thermal stability of direct GeSn/Si heterostructures is governed by the initial defect structure established during epitaxial growth, providing key design rules for understanding the fabrication of GeSn-based optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2026

The Statistical Cost of Adaptation in Multi-Source Transfer Learning

Multi-source transfer learning can improve target-domain estimation by leveraging related source data, but its benefits depend on unknown source-to-target biases. This raises a fundamental question: can a bias-agnostic estimator perform as well as an oracle that knows the true bias configuration? To study this, we introduce the intrinsic cost of adaptation, defined as the smallest worst-case ratio between the risk of any bias-agnostic estimator and the oracle risk. An intrinsic cost of one means oracle performance is achievable without knowing the biases, whereas a larger cost quantifies the unavoidable price of adaptation. Focusing on parametric estimation, we show that multi-source transfer behaves fundamentally differently from the single-source setting: adaptation is not always possible, even with only two sources. For a fixed number of sources, we characterize the intrinsic cost of adaptation and identify a phase transition separating regimes where oracle performance is achievable from those where it is not. As the number of sources grows, we further show that the adaptation cost increases. When adaptation over the full bias configuration space is impossible, additional structure can substantially reduce the cost. We study settings with ordered biases, clustered source parameters, and sufficiently separated non-informative sources, and propose estimators tailored to each regime, with supporting theoretical and empirical results. Overall, our results delineate the statistical limits of multi-source transfer, clarifying when oracle performance is attainable, when structural assumptions help, and when adaptation is fundamentally impossible.

math.ST↗

arXiv2025

Diagnosis-based mortality prediction for intensive care unit patients via transfer learning

In the intensive care unit, the underlying causes of critical illness vary substantially across diagnoses, yet prediction models accounting for diagnostic heterogeneity have not been systematically studied. To address the gap, we evaluate transfer learning approaches for diagnosis-specific mortality prediction and apply both GLM- and XGBoost-based models to the eICU Collaborative Research Database. Our results demonstrate that transfer learning consistently outperforms models trained only on diagnosis-specific data and those using a well-known ICU severity-of-illness score, i.e., APACHE IVa, alone, while also achieving better calibration than models trained on the pooled data. Our findings also suggest that the Youden cutoff is a more appropriate decision threshold than the conventional 0.5 for binary outcomes, and that transfer learning maintains consistently high predictive performance across various cutoff criteria.

cs.LG↗

arXiv2025

Transfer Learning under Group-Label Shift: A Semiparametric Exponential Tilting Approach

We propose a new framework for binary classification in transfer learning settings where both covariate and label distributions may shift between source and target domains. Unlike traditional covariate shift or label shift assumptions, we introduce a group-label shift assumption that accommodates subpopulation imbalance and mitigates spurious correlations, thereby improving robustness to real-world distributional changes. To model the joint distribution difference, we adopt a flexible exponential tilting formulation and establish mild, verifiable identification conditions via an instrumental variable strategy. We develop a computationally efficient two-step likelihood-based estimation procedure that combines logistic regression for the source outcome model with conditional likelihood estimation using both source and target covariates. We derive consistency and asymptotic normality for the resulting estimators, and extend the theory to receiver operating characteristic curves, the area under the curve, and other target functionals, addressing the nonstandard challenges posed by plug-in classifiers. Simulation studies demonstrate that our method outperforms existing alternatives under subpopulation shift scenarios. A semi-synthetic application using the waterbirds dataset further confirms the proposed method's ability to transfer information effectively and improve target-domain classification accuracy.

stat.ME↗

arXiv2025

Limitations of refinement methods for weak to strong generalization

Standard techniques for aligning large language models (LLMs) utilize human-produced data, which could limit the capability of any aligned LLM to human level. Label refinement and weak training have emerged as promising strategies to address this superalignment problem. In this work, we adopt probabilistic assumptions commonly used to study label refinement and analyze whether refinement can be outperformed by alternative approaches, including computationally intractable oracle methods. We show that both weak training and label refinement suffer from irreducible error, leaving a performance gap between label refinement and the oracle. These results motivate future research into developing alternative methods for weak to strong generalization that synthesize the practicality of label refinement or weak training and the optimality of the oracle procedure.

stat.ML↗

arXiv2025

CARROT: A Cost Aware Rate Optimal Router

With the rapid growth in the number of Large Language Models (LLMs), there has been a recent interest in LLM routing, or directing queries to the cheapest LLM that can deliver a suitable response. We conduct a minimax analysis of the routing problem, providing a lower bound and finding that a simple router that predicts both cost and accuracy for each question can be minimax optimal. Inspired by this, we introduce CARROT, a Cost AwaRe Rate Optimal rouTer that selects a model based on estimates of the models' cost and performance. Alongside CARROT, we also introduce the Smart Price-aware ROUTing (SPROUT) dataset to facilitate routing on a wide spectrum of queries with the latest state-of-the-art LLMs. Using SPROUT and prior benchmarks such as Routerbench and open-LLM-leaderboard-v2 we empirically validate CARROT's performance against several alternative routers.

stat.ML↗

arXiv2025

Learning the Distribution Map in Reverse Causal Performative Prediction

In numerous predictive scenarios, the predictive model affects the sampling distribution; for example, job applicants often meticulously craft their resumes to navigate through a screening systems. Such shifts in distribution are particularly prevalent in the realm of social computing, yet, the strategies to learn these shifts from data remain remarkably limited. Inspired by a microeconomic model that adeptly characterizes agents' behavior within labor markets, we introduce a novel approach to learn the distribution shift. Our method is predicated on a reverse causal model, wherein the predictive model instigates a distribution shift exclusively through a finite set of agents' actions. Within this framework, we employ a microfoundation model for the agents' actions and develop a statistically justified methodology to learn the distribution shift map, which we demonstrate to be effective in minimizing the performative prediction risk.

stat.ML↗

arXiv2025

Microfoundation Inference for Strategic Prediction

Often in prediction tasks, the predictive model itself can influence the distribution of the target variable, a phenomenon termed performative prediction. Generally, this influence stems from strategic actions taken by stakeholders with a vested interest in predictive models. A key challenge that hinders the widespread adaptation of performative prediction in machine learning is that practitioners are generally unaware of the social impacts of their predictions. To address this gap, we propose a methodology for learning the distribution map that encapsulates the long-term impacts of predictive models on the population. Specifically, we model agents' responses as a cost-adjusted utility maximization problem and propose estimates for said cost. Our approach leverages optimal transport to align pre-model exposure (ex ante) and post-model exposure (ex post) distributions. We provide a rate of convergence for this proposed estimate and assess its quality through empirical demonstrations on a credit-scoring dataset.

stat.ML↗

arXiv2025

Estimation with missing not at random binary outcomes via exponential tilts

We study the problem of missing not at random (MNAR) datasets with binary outcomes. We propose an exponential tilt based approach that bypasses any knowledge on 'nonresponse instruments' or 'shadow variables' that are usually required for statistical estimation. We establish a sufficient condition for identifiability of tilt parameters and propose an algorithm to estimate them. Based on these tilt parameter estimates, we propose importance weighted and doubly robust estimators for any mean functions of interest, and validate their performances in a synthetic dataset. In an experiment with the Waterbirds dataset, we utilize our tilt framework to perform unsupervised transfer learning, when the responses are missing from a target domain of interest, and achieve a prediction performance that is comparable to a gold standard.

stat.ME↗

arXiv2024

Weak Supervision Performance Evaluation via Partial Identification

Programmatic Weak Supervision (PWS) enables supervised model training without direct access to ground truth labels, utilizing weak labels from heuristics, crowdsourcing, or pre-trained models. However, the absence of ground truth complicates model evaluation, as traditional metrics such as accuracy, precision, and recall cannot be directly calculated. In this work, we present a novel method to address this challenge by framing model evaluation as a partial identification problem and estimating performance bounds using Fréchet bounds. Our approach derives reliable bounds on key metrics without requiring labeled data, overcoming core limitations in current weak supervision evaluation techniques. Through scalable convex optimization, we obtain accurate and computationally efficient bounds for metrics including accuracy, precision, recall, and F1-score, even in high-dimensional settings. This framework offers a robust approach to assessing model quality without ground truth labels, enhancing the practicality of weakly supervised learning for real-world applications.

stat.ML↗

arXiv2024

Aligners: Decoupling LLMs and Alignment

Large Language Models (LLMs) need to be aligned with human expectations to ensure their safety and utility in most applications. Alignment is challenging, costly, and needs to be repeated for every LLM and alignment criterion. We propose to decouple LLMs and alignment by training aligner models that can be used to align any LLM for a given criteria on an as-needed basis, thus also reducing the potential negative impacts of alignment on performance. Our recipe for training the aligner models solely relies on synthetic data generated with a (prompted) LLM and can be easily adjusted for a variety of alignment criteria. We use the same synthetic data to train inspectors, binary miss-alignment classification models to guide a "squad" of multiple aligners. Our empirical results demonstrate consistent improvements when applying aligner squad to various LLMs, including chat-aligned models, across several instruction-following and red-teaming datasets.

cs.CL↗