arXiv subjects

Stephane Popinet

Publications and source records attributed to Stephane Popinet.

7 recordsLinked to original sources

arXiv2026

Enhanced Gulf Stream Path Variability Under Intensified Stratification

Increased upper-ocean stratification is an unavoidable consequence of global warming and will strongly impact the structure of ocean currents. Using a high-resolution ocean model, we show that intensification of stratification leads to the loss of coherence of the Gulf Stream Extension, replacing its steady eastward path with vigorous, chaotic meanders. This regime shift persists independently of changes in the Atlantic Meridional Overturning Circulation and surface wind forcing. Enhanced meandering under intensified stratification also proves to be a robust feature across both idealized and realistic ocean models that resolve mesoscale eddies, but is not captured by coarse-resolution models that parameterize eddies. The presented findings therefore highlight the need for improved representations of oceanic turbulence in climate projections.

physics.ao-ph↗

arXiv2026

The rapidly advancing contact line Part-1: Navier slip and microscale inertial effects

Curtain coating, in which a moving plate is coated by a falling liquid sheet, sustains advancing contact lines at large capillary numbers Ca ~ O(1), based on plate speed. Steady states exist up to a critical capillary number, beyond which wetting failure occurs through air-bubble entrainment. In the steady regime, experiments report that velocity along the fluid-fluid interface accelerates as the contact line is approached, down to tens of micrometres; this has been interpreted as evidence against the Navier slip model. We ask whether this acceleration is compatible with slip models, and show that it is. Although Navier slip implies a vanishing velocity at the contact line, the experimentally accessible microscale region lies outside the slip region. The curtain-coating setup is revealing because the local Reynolds number, based on distance from the contact line r ~ 10 microns, is order unity, so the observable flow is governed by local inertia. Our two-phase Navier-Stokes Volume-of-Fluid simulations with quadtree adaptive mesh refinement resolve the smallest scales and study the flow with a Navier slip boundary condition and fixed contact angle. The simulations reproduce the non-monotonic dependence of the critical capillary number on global Reynolds number, based on feed-flow velocity, and the variation of the macroscopic contact angle at the inflection point, in agreement with Liu et al (2016). The interfacial velocity in the microscale region is well described by an inertially corrected wedge flow solution whose wedge angle is set by the inflection-point value, with agreement improving as slip length is reduced; at larger scales, interface bending follows the Benney solution. These inertial effects, absent from pure Stokes flow, are essential in the experimental region. Thus qualitative microscale observations do not decisively invalidate slip models for advancing contact lines.

physics.flu-dyn↗

arXiv2025

Implementation of integral surface tension formulations in a volume of fluid framework and their applications to Marangoni flows

Accurate numerical modeling of surface tension has been a challenging aspect of multiphase flow simulations. The integral formulation for modeling surface tension forces is known to be consistent and conservative, and to be a natural choice for the simulation of flows driven by surface tension gradients along the interface. This formulation was introduced by Popinet and Zaleski [1] for a front-tracking method and was later extended to level set methods by Al-Saud et al. [2]. In this work, we extend the integral formulation to a volume of fluid (VOF) method for capturing the interface. In fact, we propose three different schemes distinguished by the way we calculate the geometric properties of the interface, namely curvature, tangent vector and surface fraction from VOF representation. We propose a coupled level set volume of fluid (CLSVOF) method in which we use a signed distance function coupled with VOF, a height function (HF) method in which we use the height functions calculated from VOF, and a height function to distance (HF2D) method in which we use a sign-distance function calculated from height functions. For validation, these methods are rigorously tested for several problems with constant as well as varying surface tension. It is found that from an accuracy standpoint, CLSVOF has the least numerical oscillations followed by HF2D and then HF. However, from a computational speed point of view, HF method is the fastest followed by HF2D and then CLSVOF. Therefore, the HF2D method is a good compromise between speed and accuracy for obtaining faster and correct results. Keywords: Multiphase flows; Surface tension modeling; Marangoni flows

physics.flu-dyn↗

arXiv2024

A Review of the Accuracy of Direct Numerical Simulation Tools for the Simulation of Non-Spherical Bubble Collapses

Numerical methods for the simulation of cavitation processes have been developed for more than 50 years. The rich variety of physical phenomena triggered by the collapse of a bubble has several applications in medicine and environmental science but requires the development of sophisticated numerical methods able to capture the presence of sharp interfaces between fluids and solid/elastic materials, the generation of shock waves and the development of non-spherical modes. One important challenge faced by numerical methods is the important temporal and scale separation inherent to the process of bubble collapse, where many effects become predominant during very short time lapses around the instant of minimum radius when the simulations are hardly resolved. In this manuscript, we provide a detailed discussion of the parameters controlling the accuracy of direct numerical simulation in general non-spherical cases, where a new theoretical analysis is presented to generalize existing theories on the prediction of the peak pressures reached inside the bubble during the bubble collapse. We show that the ratio between the gridsize and the minimum radius allows us to scale the numerical errors introduced by the numerical method in the estimation of different relevant quantities for a variety of initial conditions.

physics.flu-dyn↗

arXiv2021

Manifold death: a Volume of Fluid implementation of controlled topological changes in thin sheets by the signature method

A well-known drawback of the Volume-Of-Fluid (VOF) method is that the breakup of thin liquid films or filaments is mainly caused by numerical aspects rather than by physical ones. The rupture of thin films occurs when their thickness reaches the order of the grid size and by refining the grid the breakup events are delayed. When thin filaments rupture, many droplets are generated due to the mass conserving properties of VOF. Thus, the numerical character of the breakup does not allow obtaining the desired convergence of the droplet size distribution under grid refinement. In this work, we present a novel algorithm to detect and perforate thin structures. First, thin films or ligaments are identified by taking quadratic moments of an indicator obtained from the volume fraction. A multiscale approach allows us to choose the critical film thickness independently of the mesh resolution. Then, the breakup is induced by making holes in the films before their thickness reaches the grid size. We show that the method improves the convergence upon grid refinement of the droplets size distribution and of enstrophy.

physics.flu-dyn↗

arXiv2020

Modeling and Detailed Numerical Simulation of the Primary Breakup of a Gasoline Surrogate Jet under Non-Evaporative Operating Conditions

In the present study, detailed numerical simulations are performed to investigate the primary breakup of a gasoline surrogate jet under non-evaporative "Spray G" operating conditions. The Spray G injector and operating conditions, developed by the Engine Combustion Network (ECN), represent the early phase of spray-guided gasoline injection. To focus the computational resources on resolving the primary breakup, simplifications have been made on the injector geometry. The effect of the internal flow on the primary breakup is modeled by specifying a nonzero injection angle at the inlet. The nonzero injection angle results in an increase of the jet penetration speed and also a deflection of the liquid jet. A parametric study on the injection angle is performed, and the numerical results are compared to the experimental data to identify the injection angle that best represents the Spray G conditions. The nonzero injection angle introduces an azimuthally non-uniform velocity in the liquid jet, which in turn influences the instability development on the jet surfaces and also the deformation and breakup of the jet head. The asymmetric primary breakup dynamics eventually lead to an azimuthal variation of droplet size distributions. The number of droplets varies significantly with the azimuthal angle, but interestingly, the probability density functions (PDF) of droplet size for different azimuthal angles collapse to a self-similar profile. Analysis has also been conducted to estimate the percentage and statistics of the tiny droplets that are under resolved in the present simulation. The PDF of the azimuthal angle is also presented, which is also shown to exhibit a self-similar form that varies little over time. Finally, a model is developed to predict the droplet number as a function of droplet diameter, azimuthal angle where a droplet is located, and time.

physics.flu-dyn↗

arXiv2012

Von K\'arm\'an Vortex Street within an Impacting Drop

The splashing of a drop impacting onto a liquid pool produces a range of different sized micro-droplets. At high impact velocities, the most significant source of these droplets is a thin liquid jet emerging at the start of the impact from the neck that connects the drop to the pool. We use ultra-high-speed video imaging in combination with high-resolution numerical simulations to show how the ejecta gives way to irregular splashing. At higher Reynolds number, its base becomes unstable, shedding vortex rings into the liquid from the free surface in an axisymmetric von K\'arm\'an vortex street, thus breaking the ejecta sheet as it forms.

physics.flu-dyn↗