arXiv subjects

Stephan Weiss

Publications and source records attributed to Stephan Weiss.

At least 19 recordsLinked to original sources

arXiv2026

Deployment-Ready UWB Localization for Industrial Ground Robots with Automatic Anchor Calibration and Terrain-Aware Fusion

Ultra-Wideband (UWB) ranging has become a viable option for industrial Autonomous Mobile Robot (AMR) localization due to improved accuracy and low cost. However, real-world deployments remain limited by two recurring challenges: calibrating static anchors can be time-consuming and error-prone, and integrating UWB with existing onboard sensors requires careful design to ensure robust and consistent pose estimation. Addressing these challenges, this paper presents an end-to-end pipeline that combines automatic anchor calibration with a generic multi-sensor estimator tailored to surface-bound vehicle motion. It targets existing AMR stacks in scenarios where robot pose priors are available for initialization. The calibration stage estimates anchor positions and range biases, while the localization stage fuses UWB with proprioceptive sensing in a bias-aware Extended Kalman Filter to improve consistency without extensive parameter tuning. Experiments on a commercial logistics AMR in a warehouse setting demonstrate accurate positioning indoors and across outdoor transitions, with improved consistency compared to an earlier estimator formulation. Evaluation on an independent forklift dataset further indicates transferability to other platforms. The method remains effective in test cases with limited line-of-sight and sparse anchor coverage. These results show that UWB localization can be deployed with substantially reduced manual effort while preserving the accuracy required for industrial AMRs. The collected warehouse dataset is made publicly available.

cs.RO↗

arXiv2026

A Multipurpose Thermal Convection Setup to Study Turbulent Super Structures

A thermal convection apparatus has been designed to study turbulent super structures at high Rayleigh numbers and Prandtl numbers of the order of unity. This apparatus consists of a rectangular cell with a length of $3.50\,\mathrm{m}$, width of $0.35\,\mathrm{m}$, and variable height, which is fixed at $0.70\,\mathrm{m}$ for the present study. This cell is installed inside a $5.6\,\mathrm{m}$ long pressure vessel facility, known as \emph{G\"ottingen Uboot}, which can be filled with compressed gasses (air, helium, nitrogen, or sulfur hexafluoride) at pressures up to $19\,\mathrm{bar}$, enabling Rayleigh numbers up to $ Ra \leq 5\times 10^{12}$ and Prandtl numbers of approximately $0.7 \leq Pr \leq 0.9$. The convection cell is bounded vertically by top and bottom plates consisting of a three-layer composite structure in which a thin Lexan plate is sandwiched between highly conductive aluminum plates. This allows for spatially resolved heat flux measurements. Each plate is subdivided into four longitudinal segments that can be independently temperature-controlled to enable homogeneous temperatures and the imposition of horizontal temperature gradients at both the top and bottom boundaries. While the bottom plate is electrically heated, the top plate's temperature is regulated using temperature-controlled circulating pressurized water. The apparatus is well suited for precise heat flux measurements, with the results obtained being in good agreement with those previously reported in the literature.

physics.flu-dyn↗

arXiv2026

Galilean State Estimation for Inertial Navigation Systems with Unknown Time Delay

Many Inertial Navigation Systems (INS) use Global Navigation Satellite System (GNSS) position as the primary measurement to drive filter performance and bound error growth. However, commercial-grade GNSS receivers introduce unknown measurement delays ranging from 50 ms to 300 ms depending on sensor quality and operating mode. Such time delays can significantly degrade INS performance unless they are explicitly compensated for. Existing algorithms commonly estimate this delay offline, run the filter concurrently with GNSS measurements using buffered Inertial Measurement Unit (IMU) data, and predict the current state by forward-integrating buffered inertial measurements via IMU preintegration. The state-of-the-art online method is an Extended Kalman Filter (EKF) that explicitly models the time delay as a state parameter, which defines the preintegration duration. This paper introduces a novel geometric framework for modeling time-delayed INS, in which Galilean symmetry is leveraged to provide a joint representation of space and time for consistent state estimation. An Equivariant Filter (EqF) is derived for the coupled estimation of navigation states and time delay. Validation is performed on two fixed-wing Uncrewed Aerial Vehicles (UAV) with GNSS time lags of 90 ms and 120 ms. The test flights last two to three minutes. Simulations further investigate delays up to 500 ms and provide a statistical comparison against the state-of-the-art EKF. Results show that the EqF preserves accuracy and consistency, while the EKF lacks consistency and its performance degrades significantly with increasing measurement delays.

cs.RO↗

arXiv2026

Decoupled Azimuth Elevation AoA Estimation Exploiting Kronecker Separable Steering Matrices

Uniform rectangular arrays (URA), structured non-uniform rectangular arrays (NURA), and parallelogram shaped (UPgA and NUPgA) arrays admit steering vectors that can be expressed as the Kronecker product of azimuth and elevation steering vectors. Accordingly, the full steering matrix can be represented as the Khatri Rao product of the corresponding azimuth and elevation steering matrices. This paper exploits this structure to develop an economical subspace decoupling framework for two dimensional angle of arrival (AoA) estimation. The proposed method first extracts the joint signal subspace from the spatial covariance matrix. Then it applies a low complexity decoupling scheme to recover the column spaces of the azimuth and elevation steering matrices. With the estimated decoupled subspaces, conventional one dimensional algorithms such as MUSIC, root MUSIC, and ESPRIT can be applied independently along each dimension, followed by pairing through a two dimensional spectral function. Monte Carlo simulations show that the proposed approach achieves higher accuracy than state of the art methods, i.e., two dimensional MUSIC, reduced-dimension MUSIC, and two-dimensional ESPRIT, for medium- and large scale arrays while requiring fewer snapshots, consequently with improved spectral efficiency.

eess.SP↗

arXiv2026

Equivariant Filter for Radar-Inertial Odometry

Radar-Inertial Odometry (RIO) based on the Extended Kalman Filter (EKF) relies on accurate extrinsic calibration between the radar and the Inertial Measurement Unit (IMU) and is sensitive to disturbances, as large linearization errors can degrade performance or even cause divergence. To address these limitations, this letter proposes an Equivariant Filter (EqF) for RIO based on a Lie group symmetry that geometrically couples navigation states and IMU biases, extending it to incorporate radar-IMU extrinsic calibration and multi-state constraint updates. This equivariant formulation inherently preserves consistency and enhances robustness, enabling reliable state estimation even under poor or completely wrong initialization of calibration states. Real-world experiments on two different Uncrewed Aerial Vehicles (UAVs) show that the proposed EqF-RIO achieves state-of-the-art accuracy under correct extrinsic calibration and offers improved convergence under large calibration errors, where the conventional EKF-RIO fails. Evaluation code is open-sourced.

cs.RO↗

arXiv2026

Reformulating AI-based Multi-Object Relative State Estimation for Aleatoric Uncertainty-based Outlier Rejection of Partial Measurements

Precise localization with respect to a set of objects of interest enables mobile robots to perform various tasks. With the rise of edge devices capable of deploying deep neural networks (DNNs) for real-time inference, it stands to reason to use artificial intelligence (AI) for the extraction of object-specific, semantic information from raw image data, such as the object class and the relative six degrees of freedom (6-DoF) pose. However, fusing such AI-based measurements in an Extended Kalman Filter (EKF) requires quantifying the DNNs' uncertainty and outlier rejection capabilities. This paper presents the benefits of reformulating the measurement equation in AI-based, object-relative state estimation. By deriving an EKF using the direct object-relative pose measurement, we can decouple the position and rotation measurements, thus limiting the influence of erroneous rotation measurements and allowing partial measurement rejection. Furthermore, we investigate the performance and consistency improvements for state estimators provided by replacing the fixed measurement covariance matrix of the 6-DoF object-relative pose measurements with the predicted aleatoric uncertainty of the DNN.

cs.RO↗

arXiv2025

Galilean Symmetry in Robotics

Galilean symmetry is the natural symmetry of inertial motion that underpins Newtonian physics. Although rigid-body symmetry is one of the most established and fundamental tools in robotics, there appears to be no comparable treatment of Galilean symmetry for a robotics audience. In this paper, we present a robotics-tailored exposition of Galilean symmetry that leverages the community's familiarity with and understanding of rigid-body transformations and pose representations. Our approach contrasts with common treatments in the physics literature that introduce Galilean symmetry as a stepping stone to Einstein's relativity. A key insight is that the Galilean matrix Lie group can be used to describe two different pose representations, Galilean frames, that use inertial velocity in the state definition, and extended poses, that use coordinate velocity. We provide three examples where applying the Galilean matrix Lie-group algebra to robotics problems is straightforward and yields significant insights: inertial navigation above the rotating Earth, manipulator kinematics, and sensor data fusion under temporal uncertainty. We believe that the time is right for the robotics community to benefit from rediscovering and extending this classical material and applying it to modern problems.

cs.RO↗

arXiv2025

Hybrid Autonomy Framework for a Future Mars Science Helicopter

Autonomous aerial vehicles, such as NASA's Ingenuity, enable rapid planetary surface exploration beyond the reach of ground-based robots. Thus, NASA is studying a Mars Science Helicopter (MSH), an advanced concept capable of performing long-range science missions and autonomously navigating challenging Martian terrain. Given significant Earth-Mars communication delays and mission complexity, an advanced autonomy framework is required to ensure safe and efficient operation by continuously adapting behavior based on mission objectives and real-time conditions, without human intervention. This study presents a deterministic high-level control framework for aerial exploration, integrating a Finite State Machine (FSM) with Behavior Trees (BTs) to achieve a scalable, robust, and computationally efficient autonomy solution for critical scenarios like deep space exploration. In this paper we outline key capabilities of a possible MSH and detail the FSM-BT hybrid autonomy framework which orchestrates them to achieve the desired objectives. Monte Carlo simulations and real field tests validate the framework, demonstrating its robustness and adaptability to both discrete events and real-time system feedback. These inputs trigger state transitions or dynamically adjust behavior execution, enabling reactive and context-aware responses. The framework is middleware-agnostic, supporting integration with systems like F-Prime and extending beyond aerial robotics.

cs.RO↗

arXiv2025

Aleatoric Uncertainty from AI-based 6D Object Pose Predictors for Object-relative State Estimation

Deep Learning (DL) has become essential in various robotics applications due to excelling at processing raw sensory data to extract task specific information from semantic objects. For example, vision-based object-relative navigation relies on a DL-based 6D object pose predictor to provide the relative pose between the object and the robot as measurements to the robot's state estimator. Accurately knowing the uncertainty inherent in such Deep Neural Network (DNN) based measurements is essential for probabilistic state estimators subsequently guiding the robot's tasks. Thus, in this letter, we show that we can extend any existing DL-based object-relative pose predictor for aleatoric uncertainty inference simply by including two multi-layer perceptrons detached from the translational and rotational part of the DL predictor. This allows for efficient training while freezing the existing pre-trained predictor. We then use the inferred 6D pose and its uncertainty as a measurement and corresponding noise covariance matrix in an extended Kalman filter (EKF). Our approach induces minimal computational overhead such that the state estimator can be deployed on edge devices while benefiting from the dynamically inferred measurement uncertainty. This increases the performance of the object-relative state estimation task compared to a fix-covariance approach. We conduct evaluations on synthetic data and real-world data to underline the benefits of aleatoric uncertainty inference for the object-relative state estimation task.

cs.RO↗

arXiv2025

Swarming Without an Anchor (SWA): Robot Swarms Adapt Better to Localization Dropouts Then a Single Robot

In this paper, we present the Swarming Without an Anchor (SWA) approach to state estimation in swarms of Unmanned Aerial Vehicles (UAVs) experiencing ego-localization dropout, where individual agents are laterally stabilized using relative information only. We propose to fuse decentralized state estimation with robust mutual perception and onboard sensor data to maintain accurate state awareness despite intermittent localization failures. Thus, the relative information used to estimate the lateral state of UAVs enables the identification of the unambiguous state of UAVs with respect to the local constellation. The resulting behavior reaches velocity consensus, as this task can be referred to as the double integrator synchronization problem. All disturbances and performance degradations except a uniform translation drift of the swarm as a whole is attenuated which is enabling new opportunities in using tight cooperation for increasing reliability and resilience of multi-UAV systems. Simulations and real-world experiments validate the effectiveness of our approach, demonstrating its capability to sustain cohesive swarm behavior in challenging conditions of unreliable or unavailable primary localization.

cs.RO↗

arXiv2025

Consistent Pose Estimation of Unmanned Ground Vehicles through Terrain-Aided Multi-Sensor Fusion on Geometric Manifolds

Aiming to enhance the consistency and thus long-term accuracy of Extended Kalman Filters for terrestrial vehicle localization, this paper introduces the Manifold Error State Extended Kalman Filter (M-ESEKF). By representing the robot's pose in a space with reduced dimensionality, the approach ensures feasible estimates on generic smooth surfaces, without introducing artificial constraints or simplifications that may degrade a filter's performance. The accompanying measurement models are compatible with common loosely- and tightly-coupled sensor modalities and also implicitly account for the ground geometry. We extend the formulation by introducing a novel correction scheme that embeds additional domain knowledge into the sensor data, giving more accurate uncertainty approximations and further enhancing filter consistency. The proposed estimator is seamlessly integrated into a validated modular state estimation framework, demonstrating compatibility with existing implementations. Extensive Monte Carlo simulations across diverse scenarios and dynamic sensor configurations show that the M-ESEKF outperforms classical filter formulations in terms of consistency and stability. Moreover, it eliminates the need for scenario-specific parameter tuning, enabling its application in a variety of real-world settings.

cs.RO↗

arXiv2025

The Difference between the Left and Right Invariant Extended Kalman Filter

The extended Kalman filter (EKF) has been the industry standard for state estimation problems over the past sixty years. The Invariant Extended Kalman Filter (IEKF) is a recent development of the EKF for the class of group-affine systems on Lie groups that has shown superior performance for inertial navigation problems. The IEKF comes in two versions, left- and right- handed respectively, and there is a perception in the robotics community that these filters are different and one should choose the handedness of the IEKF to match handedness of the measurement model for a given filtering problem. In this paper, we revisit these algorithms and demonstrate that the left- and right- IEKF algorithms (with reset step) are identical, that is, the choice of the handedness does not affect the IEKF's performance when the reset step is properly implemented. The reset step was not originally proposed as part of the IEKF, however, we provide simulations to show that the reset step improves asymptotic performance of all versions of the the filter, and should be included in all high performance algorithms. The GNSS-aided inertial navigation system (INS) is used as a motivating example to demonstrate the equivalence of the two filters.

cs.RO↗

arXiv2025

Learning Point Correspondences In Radar 3D Point Clouds For Radar-Inertial Odometry

Using 3D point clouds in odometry estimation in robotics often requires finding a set of correspondences between points in subsequent scans. While there are established methods for point clouds of sufficient quality, state-of-the-art still struggles when this quality drops. Thus, this paper presents a novel learning-based framework for predicting robust point correspondences between pairs of noisy, sparse and unstructured 3D point clouds from a light-weight, low-power, inexpensive, consumer-grade System-on-Chip (SoC) Frequency Modulated Continuous Wave (FMCW) radar sensor. Our network is based on the transformer architecture which allows leveraging the attention mechanism to discover pairs of points in consecutive scans with the greatest mutual affinity. The proposed network is trained in a self-supervised way using set-based multi-label classification cross-entropy loss, where the ground-truth set of matches is found by solving the Linear Sum Assignment (LSA) optimization problem, which avoids tedious hand annotation of the training data. Additionally, posing the loss calculation as multi-label classification permits supervising on point correspondences directly instead of on odometry error, which is not feasible for sparse and noisy data from the SoC radar we use. We evaluate our method with an open-source state-of-the-art Radar-Inertial Odometry (RIO) framework in real-world Unmanned Aerial Vehicle (UAV) flights and with the widely used public Coloradar dataset. Evaluation shows that the proposed method improves the position estimation accuracy by over 14 % and 19 % on average, respectively. The open source code and datasets can be found here: https://github.com/aau-cns/radar_transformer.

cs.RO↗

arXiv2025

Real-Time Initialization of Unknown Anchors for UWB-aided Navigation

This paper presents a framework for the real-time initialization of unknown Ultra-Wideband (UWB) anchors in UWB-aided navigation systems. The method is designed for localization solutions where UWB modules act as supplementary sensors. Our approach enables the automatic detection and calibration of previously unknown anchors during operation, removing the need for manual setup. By combining an online Positional Dilution of Precision (PDOP) estimation, a lightweight outlier detection method, and an adaptive robust kernel for non-linear optimization, our approach significantly improves robustness and suitability for real-world applications compared to state-of-the-art. In particular, we show that our metric which triggers an initialization decision is more conservative than current ones commonly based on initial linear or non-linear initialization guesses. This allows for better initialization geometry and subsequently lower initialization errors. We demonstrate the proposed approach on two different mobile robots: an autonomous forklift and a quadcopter equipped with a UWB-aided Visual-Inertial Odometry (VIO) framework. The results highlight the effectiveness of the proposed method with robust initialization and low positioning error. We open-source our code in a C++ library including a ROS wrapper.

cs.RO↗

arXiv2025

Sensor Model Identification via Simultaneous Model Selection and State Variable Determination

We present a method for the unattended gray-box identification of sensor models commonly used by localization algorithms in the field of robotics. The objective is to determine the most likely sensor model for a time series of unknown measurement data, given an extendable catalog of predefined sensor models. Sensor model definitions may require states for rigid-body calibrations and dedicated reference frames to replicate a measurement based on the robot's localization state. A health metric is introduced, which verifies the outcome of the selection process in order to detect false positives and facilitate reliable decision-making. In a second stage, an initial guess for identified calibration states is generated, and the necessity of sensor world reference frames is evaluated. The identified sensor model with its parameter information is then used to parameterize and initialize a state estimation application, thus ensuring a more accurate and robust integration of new sensor elements. This method is helpful for inexperienced users who want to identify the source and type of a measurement, sensor calibrations, or sensor reference frames. It will also be important in the field of modular multi-agent scenarios and modularized robotic platforms that are augmented by sensor modalities during runtime. Overall, this work aims to provide a simplified integration of sensor modalities to downstream applications and circumvent common pitfalls in the usage and development of localization approaches.

cs.RO↗

arXiv2025

Autonomous Control of Redundant Hydraulic Manipulator Using Reinforcement Learning with Action Feedback

This article presents an entirely data-driven approach for autonomous control of redundant manipulators with hydraulic actuation. The approach only requires minimal system information, which is inherited from a simulation model. The non-linear hydraulic actuation dynamics are modeled using actuator networks from the data gathered during the manual operation of the manipulator to effectively emulate the real system in a simulation environment. A neural network control policy for autonomous control, based on end-effector (EE) position tracking is then learned using Reinforcement Learning (RL) with Ornstein-Uhlenbeck process noise (OUNoise) for efficient exploration. The RL agent also receives feedback based on supervised learning of the forward kinematics which facilitates selecting the best suitable action from exploration. The control policy directly provides the joint variables as outputs based on provided target EE position while taking into account the system dynamics. The joint variables are then mapped to the hydraulic valve commands, which are then fed to the system without further modifications. The proposed approach is implemented on a scaled hydraulic forwarder crane with three revolute and one prismatic joint to track the desired position of the EE in 3-Dimensional (3D) space. With the emulated dynamics and extensive learning in simulation, the results demonstrate the feasibility of deploying the learned controller directly on the real system.

cs.RO↗

arXiv2025

CaRoSaC: A Reinforcement Learning-Based Kinematic Control of Cable-Driven Parallel Robots by Addressing Cable Sag through Simulation

This paper introduces the Cable Robot Simulation and Control (CaRoSaC) Framework, which integrates a simulation environment with a model-free reinforcement learning control methodology for suspended Cable-Driven Parallel Robots (CDPRs), accounting for cable sag. Our approach seeks to bridge the knowledge gap of the intricacies of CDPRs due to aspects such as cable sag and precision control necessities by establishing a simulation platform that captures the real-world behaviors of CDPRs, including the impacts of cable sag. The framework offers researchers and developers a tool to further develop estimation and control strategies within the simulation for understanding and predicting the performance nuances, especially in complex operations where cable sag can be significant. Using this simulation framework, we train a model-free control policy in Reinforcement Learning (RL). This approach is chosen for its capability to adaptively learn from the complex dynamics of CDPRs. The policy is trained to discern optimal cable control inputs, ensuring precise end-effector positioning. Unlike traditional feedback-based control methods, our RL control policy focuses on kinematic control and addresses the cable sag issues without being tethered to predefined mathematical models. We also demonstrate that our RL-based controller, coupled with the flexible cable simulation, significantly outperforms the classical kinematics approach, particularly in dynamic conditions and near the boundary regions of the workspace. The combined strength of the described simulation and control approach offers an effective solution in manipulating suspended CDPRs even at workspace boundary conditions where traditional approach fails, as proven from our experiments, ensuring that CDPRs function optimally in various applications while accounting for the often neglected but critical factor of cable sag.

cs.RO↗

arXiv2025

Least-Squares Khatri-Rao Factorization of a Polynomial Matrix

The Khatri-Rao product is extensively used in array processing, tensor decomposition, and multi-way data analysis. Many applications require a least-squares (LS) Khatri-Rao factorization. In broadband sensor array problems, polynomial matrices effectively model frequency-dependent behaviors, necessitating extensions of conventional linear algebra techniques. This paper generalizes LS Khatri-Rao factorization from ordinary to polynomial matrices by applying it to the discrete Fourier transform (DFT) samples of polynomial matrices. Phase coherence across bin-wise Khatri-Rao factors is ensured via a phasesmoothing algorithm. The proposed method is validated through broadband angle-of-arrival (AoA) estimation for uniform planar arrays (UPAs), where the steering matrix is a polynomial matrix, which can be represented as a Khatri-Rao product between steering matrix in azimuth and elevation directions.

eess.SP↗