arXiv subjects

Stefan Engblom

Publications and source records attributed to Stefan Engblom.

At least 19 recordsLinked to original sources

arXiv2026

Bayesian modelling of herd-level infection dynamics in cattle: Local spread as the primary driver of Salmonella Dublin persistence on Öland

Salmonella Dublin (S. Dublin), a zoonotic serotype adapted to cattle, causes animal welfare issues and economic losses. The disease has proven particularly challenging to control in Öland, Sweden. This study uses Bayesian simulation-based inference of bulk tank milk sample results to analyse the S. Dublin infection dynamics in Öland cattle. The infection process was formulated as a dynamic state-space model and particle Markov-chain Monte Carlo methods were applied to infer the underlying infection dynamics and estimate the basic reproduction number ($R_0$) as well as the effective reproduction number ($R_t$). These metrics provide insight into transmission dynamics, enabling assessment of the effectiveness of the current S. Dublin control in Swedish cattle and identification of interventions that may reduce the prevalence. The results show that most holdings on Öland have $R_0 < 1$, indicating that infection is expected to die out after introduction. However, in a subset of holdings $R_0 > 1$, and there the risk for spread of S. Dublin is higher. Furthermore, the analysis reveals that on average, $R_t \approx 1$, suggesting a stable endemic presence unless effective interventions are implemented. In addition, the results show that it is insufficient to restrict the movements of infected cattle on Öland to bring $R_t < 1$, as local spread and within-herd transmission contribute equally to the force of infection (approximately 50% each). These findings demonstrate how Bayesian data-driven analysis can support evidence-based decision making for the control and eradication of S. Dublin in cattle.

q-bio.PE↗

arXiv2026

DLCM: a versatile multi-level solver for heterogeneous multicellular systems

Computational modeling of multicellular systems may aid in untangling cellular dynamics and emergent properties of biological cell populations. A key challenge is to balance the level of model detail and the computational efficiency, while using physically interpretable parameters to facilitate meaningful comparisons with biological data. For this purpose, we present the DLCM-solver (discrete Laplacian cell mechanics), a flexible and efficient computational solver for spatial and stochastic simulations of populations of cells, developed from first principle to support mechanistic investigations. The solver has been designed as a module in URDME, the unstructured reaction-diffusion master equation open software framework, to allow for the integration of intra-cellular models with extra-cellular features handled by the DLCM. The solver manages discrete cells on a fixed lattice and reaction-transport events in a continuous-time Markov chain. Space-continuous micro-environment quantities such as pressure and chemical substances are supported by the framework, permitting a variety of modeling choices concerning chemotaxis, mechanotaxis, nutrient-driven cell growth and death, among others. An essential and novel feature of the DLCM-solver is the coupling of cellular pressure to the curvature of the cell populations by elliptic projection onto the computational grid, with which we can include effects from surface tension between populations. We demonstrate the flexibility of the framework by implementing benchmark problems of cell sorting, cellular signaling, tumor growth, and chemotaxis models. We additionally formally analyze the computational complexity and show that it is theoretically optimal for systems based on pressure-driven cell migration. In summary, the solver balances efficiency and a relatively fine resolution, while supporting a high level of interpretability.

q-bio.QM↗

arXiv2026

Towards Data-Driven Modeling of Cell Cycle and Wound Closure Processes

Effective wound repair treatments rely on a clear picture of how cell proliferation and migration are coordinated during tissue restoration. Fibroblasts are key contributors to tissue restoration in the dermis, and modern imaging tools allow their cell-cycle progression to be observed directly, enabling comparison between experiments and computational models. Here we investigate how different stages of the cell cycle influence fibroblast-driven wound closure using the Discrete Laplacian Cell Mechanics (DLCM) framework driven by time-lapse microscopy data. \textit{In vitro} assays provide cell positions, migration behaviour, and cycle-stage information, and we show that incorporating proliferation, migration, and cell cycle arrest allows the computational model to reproduce the essential experimental trends. The results reveal that arrest in the G1 phase notably impacts the cell cycle dynamics and that the initial spatial arrangement of cycle states significantly affects wound closure. By linking single-cell cycle dynamics with emergent tissue behaviour this work establishes a quantitative approach for exploring how intracellular processes shape repair processes. More broadly, it demonstrates the value of integrating high-resolution data with cell-based mechanical models and provides a foundation for systematic \textit{in silico} evaluation of therapeutic interventions.

q-bio.CB↗

arXiv2026

The URDME manual Version 1.5

We have developed URDME, a general software for simulation of stochastic reaction-diffusion processes on unstructured meshes. This allows for a more flexible handling of complicated geometries and curved boundaries compared to simulations on structured, cartesian meshes. The underlying algorithm is the next subvolume method, extended to unstructured meshes by obtaining jump coefficients from a finite element formulation of the corresponding macroscopic equation. This manual describes version 1.5 of the software. Refer to http://www.urdme.org for the latest updates.

q-bio.MN↗

arXiv2025

Modelling Population-Level Hes1 Dynamics: Insights from a Multi-Framework Approach

Mathematical models of living cells have been successively refined with advancements in experimental techniques. A main concern is striking a balance between modelling power and the tractability of the associated mathematical analysis. In this work we model the dynamics for the transcription factor Hairy and enhancer of split-1 (Hes1), whose expression oscillates during neural development, and which critically enables stable fate decision in the embryonic brain. We design, parametrise, and analyse a detailed spatial model using ordinary differential equations (ODEs) over a grid capturing both transient oscillatory behaviour and fate decision on a population-level. We also investigate the relationship between this ODE model and a more realistic grid-based model involving intrinsic noise using mostly directly biologically motivated parameters. While we focus specifically on Hes1 in neural development, the approach of linking deterministic and stochastic grid-based models shows promise in modelling various biological processes taking place in a cell population. In this context, our work stresses the importance of the interpretability of complex computational models into a framework which is amenable to mathematical analysis.

q-bio.MN↗

arXiv2024

Morphological stability for in silico models of avascular tumors

The landscape of computational modeling in cancer systems biology is diverse, offering a spectrum of models and frameworks, each with its own trade-offs and advantages. Ideally, models are meant to be useful in refining hypotheses, to sharpen experimental procedures and, in the longer run, even for applications in personalized medicine. One of the greatest challenges is to balance model realism and detail with experimental data to eventually produce useful data-driven models. We contribute to this quest by developing a transparent, highly parsimonious, first principles silico model of a growing avascular tumor. We initially formulate the physiological considerations and the specific model within a stochastic cell-based framework. We next formulate a corresponding mean-field model using partial differential equations which is amenable to mathematical analysis. Despite a few notable differences between the two models, we are in this way able to successfully detail the impact of all parameters in the stability of the growth process and on the eventual tumor fate of the stochastic model. This facilitates the deduction of Bayesian priors for a given situation, but also provides important insights into the underlying mechanism of tumor growth and progression. Although the resulting model framework is relatively simple and transparent, it can still reproduce the full range of known emergent behavior. We identify a novel model instability arising from nutrient starvation and we also discuss additional insight concerning possible model additions and the effects of those. Thanks to the framework's flexibility, such additions can be readily included whenever the relevant data become available.

math.DS↗

arXiv2024

Modeling the hallmarks of avascular tumors

We present a stochastic computational model of avascular tumors, emphasizing the detailed implementation of the first four so-called hallmarks of cancer: self-sufficiency in growth factors, resistance to growth inhibitors, avoidance of apoptosis, and unlimited growth potential. Our goal is to provide a foundational understanding of the first steps of cancer malignancy while addressing modeling uncertainties, thus bringing us closer to a first-principles grasp of this process. Preliminary numerical simulations illustrate the comprehensiveness of our perspective.

q-bio.PE↗

arXiv2023

Bayesian Monitoring of COVID-19 in Sweden

In an effort to provide regional decision support for the public healthcare, we design a data-driven compartment-based model of COVID-19 in Sweden. From national hospital statistics we derive parameter priors, and we develop linear filtering techniques to drive the simulations given data in the form of daily healthcare demands. We additionally propose a posterior marginal estimator which provides for an improved temporal resolution of the reproduction number estimate as well as supports robustness checks via a parametric bootstrap procedure. From our computational approach we obtain a Bayesian model of predictive value which provides important insight into the progression of the disease, including estimates of the effective reproduction number, the infection fatality rate, and the regional-level immunity. We successfully validate our posterior model against several different sources, including outputs from extensive screening programs. Since our required data in comparison is easy and non-sensitive to collect, we argue that our approach is particularly promising as a tool to support monitoring and decisions within public health.

stat.AP↗

arXiv2022

Bayesian inference in Epidemics: linear noise analysis

This paper offers a qualitative insight into the convergence of Bayesian parameter inference in a setup which mimics the modeling of the spread of a disease with associated disease measurements. Specifically, we are interested in the Bayesian model's convergence with increasing amounts of data under measurement limitations. Depending on how weakly informative the disease measurements are, we offer a kind of `best case' as well as a `worst case' analysis where, in the former case, we assume that the prevalence is directly accessible, while in the latter that only a binary signal corresponding to a prevalence detection threshold is available. Both cases are studied under an assumed so-called linear noise approximation as to the true dynamics. Numerical experiments test the sharpness of our results when confronted with more realistic situations for which analytical results are unavailable.

math.ST↗

arXiv2021

Robust and integrative Bayesian neural networks for likelihood-free parameter inference

State-of-the-art neural network-based methods for learning summary statistics have delivered promising results for simulation-based likelihood-free parameter inference. Existing approaches require density estimation as a post-processing step building upon deterministic neural networks, and do not take network prediction uncertainty into account. This work proposes a robust integrated approach that learns summary statistics using Bayesian neural networks, and directly estimates the posterior density using categorical distributions. An adaptive sampling scheme selects simulation locations to efficiently and iteratively refine the predictive posterior of the network conditioned on observations. This allows for more efficient and robust convergence on comparatively large prior spaces. We demonstrate our approach on benchmark examples and compare against related methods.

stat.ML↗

arXiv2020

Initialization of a Disease Transmission Model

Approaches to the calculation of the full state vector of a larger epidemiological model for the spread of COVID-19 in Sweden at the initial time instant from available data and with a simplified dynamical model are proposed and evaluated. The larger epidemiological model is based on a continuous Markov chain and captures the demographic composition of and the transport flows between the counties of Sweden. Its intended use is to predict the outbreak development in temporal and spatial coordinates as well as across the demographic groups. It can also support evaluating and comparing of prospective intervention strategies in terms of e.g. lockdown in certain areas or isolation of specific age groups. The simplified model is a discrete time-invariant linear system that has cumulative infectious incidence, infected population, asymptomatic population, exposed population, and infectious pressure as the state variables. Since the system matrix of the model depends on a number transition rates, structural properties of the model are investigated for suitable parameter ranges. It is concluded that the model becomes unobservable for some parameter values. Two contrasting approaches to the initial state estimation are considered. One is a version of Rauch-Tung-Striebel smoother and another is based on solving a batch nonlinear optimization problem. The benefits and shortcomings of the considered estimation techniques are analyzed and compared on synthetic data for several Swedish counties.

eess.SY↗

arXiv2020

Distributed and Adaptive Fast Multipole Method In Three Dimensions

We develop a general distributed implementation of an adaptive fast multipole method in three space dimensions. We rely on a balanced type of adaptive space discretisation which supports a highly transparent and fully distributed implementation. A complexity analysis indicates favorable scaling properties and numerical experiments on up to 512 cores and 1 billion source points verify them. The parameters controlling the algorithm are subject to in-depth experiments and the performance response to the input parameters implies that the overall implementation is well-suited to automated tuning.

math.NA↗

arXiv2020

Flash X-ray diffraction imaging in 3D: a proposed analysis pipeline

Modern Flash X-ray diffraction Imaging (FXI) acquires diffraction signals from single biomolecules at a high repetition rate from X-ray Free Electron Lasers (XFELs), easily obtaining millions of 2D diffraction patterns from a single experiment. Due to the stochastic nature of FXI experiments and the massive volumes of data, retrieving 3D electron densities from raw 2D diffraction patterns is a challenging and time-consuming task. We propose a semi-automatic data analysis pipeline for FXI experiments, which includes four steps: hit finding and preliminary filtering, pattern classification, 3D Fourier reconstruction, and post analysis. We also include a recently developed bootstrap methodology in the post-analysis step for uncertainty analysis and quality control. To achieve the best possible resolution, we further suggest using background subtraction, signal windowing, and convex optimization techniques when retrieving the Fourier phases in the post-analysis step. As an application example, we quantified the 3D electron structure of the PR772 virus using the proposed data-analysis pipeline. The retrieved structure was above the detector-edge resolution and clearly showed the pseudo-icosahedral capsid of the PR772.

eess.IV↗

arXiv2020

Bayesian epidemiological modeling over high-resolution network data

Mathematical epidemiological models have a broad use, including both qualitative and quantitative applications. With the increasing availability of data, large-scale quantitative disease spread models can nowadays be formulated. Such models have a great potential, e.g., in risk assessments in public health. Their main challenge is model parameterization given surveillance data, a problem which often limits their practical usage. We offer a solution to this problem by developing a Bayesian methodology suitable to epidemiological models driven by network data. The greatest difficulty in obtaining a concentrated parameter posterior is the quality of surveillance data; disease measurements are often scarce and carry little information about the parameters. The often overlooked problem of the model's identifiability therefore needs to be addressed, and we do so using a hierarchy of increasingly realistic known truth experiments. Our proposed Bayesian approach performs convincingly across all our synthetic tests. From pathogen measurements of shiga toxin-producing Escherichia coli O157 in Swedish cattle, we are able to produce an accurate statistical model of first-principles confronted with data. Within this model we explore the potential of a Bayesian public health framework by assessing the efficiency of disease detection and -intervention scenarios.

stat.ME↗

arXiv2018

Supervised Classification Methods for Flash X-ray single particle diffraction Imaging

Current Flash X-ray single-particle diffraction Imaging (FXI) experiments, which operate on modern X-ray Free Electron Lasers (XFELs), can record millions of interpretable diffraction patterns from individual biomolecules per day. Due to the stochastic nature of the XFELs, those patterns will to a varying degree include scatterings from contaminated samples. Also, the heterogeneity of the sample biomolecules is unavoidable and complicates data processing. Reducing the data volumes and selecting high-quality single-molecule patterns are therefore critical steps in the experimental set-up. In this paper, we present two supervised template-based learning methods for classifying FXI patterns. Our Eigen-Image and Log-Likelihood classifier can find the best-matched template for a single-molecule pattern within a few milliseconds. It is also straightforward to parallelize them so as to fully match the XFEL repetition rate, thereby enabling processing at site.

cs.CV↗

arXiv2018

Stochastic simulation of pattern formation in growing tissue: a multilevel approach

We take up the challenge of designing realistic computational models of large interacting cell populations. The goal is essentially to bring Gillespie's celebrated stochastic methodology to the level of an interacting population of cells. Specifically, we are interested in how the gold standard of single cell computational modeling, here taken to be spatial stochastic reaction-diffusion models, may be efficiently coupled with a similar approach at the cell population level. Concretely, we target a recently proposed set of pathways for pattern formation involving Notch-Delta signaling mechanisms. These involve cell-to-cell communication as mediated both via direct membrane contact sites as well as via cellular protrusions. We explain how to simulate the process in growing tissue using a multilevel approach and we discuss implications for future development of the associated computational methods.

cs.CE↗

arXiv2018

SimInf: An R package for Data-driven Stochastic Disease Spread Simulations

We present the R package SimInf which provides an efficient and very flexible framework to conduct data-driven epidemiological modeling in realistic large scale disease spread simulations. The framework integrates infection dynamics in subpopulations as continuous-time Markov chains using the Gillespie stochastic simulation algorithm and incorporates available data such as births, deaths and movements as scheduled events at predefined time-points. Using C code for the numerical solvers and OpenMP to divide work over multiple processors ensures high performance when simulating a sample outcome. One of our design goal was to make SimInf extendable and enable usage of the numerical solvers from other R extension packages in order to facilitate complex epidemiological research. In this paper, we provide a technical description of the framework and demonstrate its use on some basic examples. We also discuss how to specify and extend the framework with user-defined models.

q-bio.PE↗

arXiv2018

Mesoscopic Modeling of Random Walk and Reactions in Crowded Media

We develop a mesoscopic modeling framework for diffusion in a crowded environment, particularly targeting applications in the modeling of living cells. Through homogenization techniques we effectively coarse-grain a detailed microscopic description into a previously developed internal state diffusive framework. The observables in the mesoscopic model correspond to solutions of macroscopic partial differential equations driven by stochastically varying diffusion fields in space and time. Analytical solutions and numerical experiments illustrate the framework.

q-bio.SC↗