arXiv Science⌕ Search

arXiv subjects

Stefaan Poedts

Publications and source records attributed to Stefaan Poedts.

At least 19 recordsLinked to original sources

An implicit high-order flux reconstruction method with logarithmic variables for hypersonic flows in thermochemical nonequilibrium

Simulating hypersonic flows in thermochemical nonequilibrium requires solving the Navier-Stokes equations for reacting, possibly ionised mixtures. Compact high-order computations of viscous two-temperature air flows on unstructured grids have not gone beyond P = 2. We present an implicit Flux Reconstruction (FR) method for such flows, built on three ingredients. First, the solver stores and updates the logarithms of the partial densities and temperatures, making every state admissible without a positivity limiter and, for ionised mixtures, imposing charge neutrality consistently with the implicit update. Second, shocks are captured by subcell order blending, extended to steady implicit computations on curved Gauss-Legendre meshes, with second-order subcell blending in subsonic regions and an automatic freeze of the blending near convergence. Third, a pseudo-transient Newton method with a physicality-limited update and automatic CFL control reaches steady state from the free stream with the same settings at every order. The design order is verified up to sixth order on a manufactured solution for five-species air with finite-rate chemistry and vibrational relaxation. Steady viscous solutions up to sixth order are obtained for five- and eleven-species air on the High Enthalpy shock tunnel Göttingen (HEG) cylinder and for eleven-species air on the RAM-C II vehicle. To our knowledge, this work gives the first design-order verification of a high-order method with finite-rate air chemistry and vibrational relaxation, and the first high-order finite-element-type computations of viscous eleven-species, two-temperature air. On the HEG cylinder, the stagnation-point heat flux is within 2% of finite-volume references and within 6% of the measurements, with a comparable number of degrees of freedom to second-order finite-volume computations but on meshes with 20 to 40 times fewer elements.

physics.comp-ph↗

HelioFill: History-Conditioned Diffusion Estimation of Solar Far-Side EUV Emission

The loss of STEREO-B in 2014 created a persistent blind spot in Extreme UltraViolet imaging of the solar far-side. We present textbf{HelioFill}, to the authors' knowledge, the first denoising-diffusion inpainting model that estimates the unobserved sector of full-Sun 304 A maps from the current Earth-side (SDO) and STEREO-A views. Because these views cannot constrain structures fully enclosed in the unobserved sector, HelioFill's diffusion stage is also conditioned on the sector's own rotation history, supplied as causal persistence and information-age maps; a rectified-flow refinement then adds realistic small-scale texture. Test rotations are separated from the diffusion stage's training timestamps by full-rotation guard bands. Over the unobserved sector, HelioFill's estimate correlates with the three-view truth at rho=0.520, above persistence and the input-independent climatological mean on 97.9% of the test maps, which conditioning on the current views alone does not achieve; in peak signal-to-noise ratio it exceeds them by 2.27 and 0.66 dB and matches a direct observation of the sector made approx 29h before or after it. The refinement lowers learned perceptual image patch similarity by 11% at a cost of 0.50 dB and 0.055 in correlation. HelioFill localizes active regions better than persistence (Dice score 0.449 vs. 0.384) and detects fully enclosed ones, although persistence detects more individual regions and coronal holes remain poorly reproduced. Against near-simultaneous far-side Solar Orbiter/EUI observations from 2022-2025, HelioFill correlates with the truth at rho=0.375, above climatology and level with persistence, which it exceeds in PSNR and structural similarity index; its diffusion stage alone reaches 0.460, above both, and the refinement stage costs the difference. HelioFill thus provides observationally plausible global EUV context within quantified limits.

astro-ph.SR↗

Adding slow magnetoacoustic mode to the HLL-type multi-state approximate Riemann solution

Multi-state HLL-type approximate Riemann solutions of ideal magnetohydrodynamics (MHD) typically assume that the medium within the Riemann fan is incompressible, and thus the slow magnetoacoustic mode cannot be included in their space-time wave configurations for the intermediate states. We propose a new strategy to design multi-state HLL-type solutions, allowing for the medium within the Riemann fan to be compressible. In particular, for the complete seven-wave configuration of the MHD Riemann problem, we estimate the slow magnetoacoustic speeds and a longitudinal flow speed between the slow modes, whose compressibility is estimated based on the relations between fast, Alfvén, and slow speeds. Then, following the conservation laws and Rankine-Hugoniot jump relations across the fast, Alfvén, and slow waves, we calculate all the intermediate states within the Riemann fan. Moreover, we discuss the solutions when certain wave modes degenerate, ensuring well-posedness and smooth transitions between complete and degenerate wave configurations. Numerical simulations using a Finite Volume solver show that the proposed approximate Riemann solution is less diffusive than the classic HLLD scheme, particularly for slow mode waves. For example, in a 1D test case with a strong longitudinal magnetic field, the new scheme needs one order of magnitude fewer grid cells compared to the classic HLLD scheme to resolve all wave modes.

physics.comp-ph↗

The energetic atmosphere of the Sun

Understanding the mechanisms that heat the Sun's chromosphere and corona to temperatures far exceeding those of the solar photosphere below remains one of the central challenges in solar physics. Small-scale, rapidly evolving processes - including shocks, turbulence, magnetohydrodynamic waves, reconnection-driven jets, and nano-flares - are thought to contribute significantly to the heating budget. However, direct observational constraints on their spatial, temporal, and spectral signatures remain hard to obtain. At millimeter wavelengths, optically thick thermal emission provides a comparatively direct measure of gas temperature. While the Atacama Large Millimeter/submillimeter Array (ALMA) already provides unique diagnostic capabilities, offering temperature diagnostics and high-cadence imaging, the current capabilities are still limiting the study of such dynamic, small-scale phenomena. Improved spatial resolution, enhanced uv-coverage, and simultaneous multi-band observations, as proposed for ALMA2040, would enable transformative progress in capturing dynamic processes across multiple heights and enable time-dependent three-dimensional thermal and magnetic tomography of the chromosphere. Combined with complementary diagnostics and simulations, these measurements would test how small-scale processes contribute to atmospheric heating.

astro-ph.IM↗

Magnetic connectivity from the Sun to the Earth with MHD models II. Impact of input magnetic maps

Connectivity estimation needs to be fast and thus usually relies on semi-empirical models. We previously established that optimised magnetohydrodynamics (MHD) models can also be used to derive magnetic connectivity, yielding good results, especially for complex configurations. However, the modelling is not the only factor that can impact the connectivity estimation. Models' results, both semi-empirical and MHD, depend heavily on the input data used to drive the simulation. In order to quantify this impact on our connectivity estimation, we used 20 different maps by four providers. We selected the period of July 2019, which corresponds to Carrington rotation (CR) number 2219, because it had already been studied in a previous paper. It corresponds to a period of minimum activity, meaning minimal interference from transient structures, but with a high-speed stream and several polarity switches. We have compared our results with in situ data from ACE and developed several visualisation techniques to validate connectivity not only for a specific date but also for a full CR. The choice of the input magnetic map drastically affects the connectivity estimates, with global scores going from 28% global agreement to 63% in the most extreme case. The HMI and GONG maps consistently gave the best connectivity estimations, with more than 50% correct results of the full CR. For this specific period, the GONG-ADAPT maps yielded the least reliable results, with a score below 35%. This is not surprising, as we have shown before that COCONUT required parameter adjustments for these maps. However, WSO maps which showed poor coronal agreement actually provided good connectivity estimates, showing that the Heliospheric Current Sheet (HCS) location is in the end the most crucial parameter for connectivity. Consistent data over a full Carrington rotation are to be favored compared to daily.

astro-ph.SR↗

Magnetohydrodynamic coronal modelling with high-fidelity magnetograms

To resolve coronal structures in detail, it is essential to constrain the coronal model using high-fidelity magnetograms with minimal smoothing. In this paper, we improve the numerical stability of COCONUT to enable efficient coronal MHD simulations driven directly by photospheric magnetograms, including magnetic field strengths exceeding 1000 Gauss (G), and then use it to investigate the impact of small-scale magnetic field structures that are typically filtered out of photospheric magnetograms on the coronal simulation results. We constrain this model with two types of magnetograms: the high-fidelity HMI photospheric magnetogram with only minor preprocessing through Gaussian smoothing, which preserves magnetic field strengths reaching 1500 G, and one processed using 50th-order filtered spherical harmonics, where the magnetic field strength is limited to below 100 G. The results demonstrate that the COCONUT can reproduce the large-scale coronal structures revealed by pB and EUV observations. Compared with the coronal MHD simulation constrained by a conventionally filtered magnetogram, the simulation constrained by the high-fidelity magnetogram yields approximately $50\%$ more OMF and produces EUV images that are more consistent with the observations. Moreover, the results show that when viewed from low latitudes in certain EUV passbands, such as the 193~Å channel, open-field regions near the solar poles may appear as bright structures that are typically associated with closed-field regions. This finding highlights the need for solar polar-orbiting missions to overcome the limitations and ambiguities arising from the restricted view of the polar regions from the ecliptic plane and to provide more complete full-Sun observations.

astro-ph.SR↗

Supersonic flows observed by THEMIS related to a coronal bright point and filament

In this paper, we report on the dynamics of the fine structure of a solar quiescent filament observed on September 28, 2023, with the Télescope Héliographique pour l'Etude du Magnétisme et des Instabilités Solaires (THEMIS). The main aim is to understand the relationship between the supersonic downflows measured in H$α$ at the filament end and an associated coronal bright point. We use a cloud-model method to derive the supersonic velocity of the falling, elongated cool blob. Besides, we use H$α$ Global Oscillation Network Group (GONG) data to track the plasma along the filament. Repetitive plasma motions are observed along the northern end of the filament. During one event of plasma motion, the THEMIS field of view was centred on the filament end, where supersonic downflows of 89.8 km s$^{-1}$ were measured with a standard deviation of $\pm$0.25 km s$^{-1}$. We suggest that the plasma moving along the filament could be falling towards the chromosphere. A ballistic trajectory could confirm this first scenario. However, we could not rule out the second scenario, in which coronal rain forms due to the thermal instability of coronal plasma. In the hot AIA channels, we identify a bright point at the same location, with a temperature reaching about 6 MK. In addition, we confirm a counter-streaming flow pattern along the fine filament strands, with widths of less than an arc second, as measured by the high-spatial- and spectral-resolution spectra of THEMIS.

astro-ph.SR↗

On the Effect of Large Scale Structures and Turbulence on Solar Eruptive Events: The Cross-Scale Challenge for Space Weather

Coronal Mass Ejections (CMEs) are among the most powerful drivers of space weather, yet their prediction remains elusive. A fundamental obstacle is the problem's multiscale nature: large-scale magnetohydrodynamic models do not resolve the turbulent fluctuations that govern particle transport and magnetic connectivity. We present a new model that combines a MICroscopic diffusion approach of turbulence with MACroscopic EUHFORIA simulations (MICMAC) to address the cross-scale challenge of space weather. By incorporating turbulence properties into such small-scale Monte Carlo simulations, we describe an extreme CME event, tracing both magnetic field lines and 100 MeV protons from the CME-driven shock to 1 AU. We find that turbulence dramatically broadens and distorts the magnetic connection between the CME nose and Earth, producing footpoint distributions that are highly non-Gaussian, anisotropic, and patchy. MICMAC suggests that the distribution's enstrophy (non-Gaussianity) grows as the CME approaches Earth, signaling anomalous diffusive behavior. A simple shear-layer toy model reproduces the observed in-plane anisotropy, suggesting that local current sheet geometry imprints a persistent memory on the turbulent field. Our results demonstrate that cross-scale coupling between the CME's large-scale structure and ambient turbulence must be accounted for in space weather models. We discuss implications for SEP forecasting and interpreting multi-spacecraft observations.

astro-ph.SR↗

MHD modeling of magnetic flux evolution around solar maximum by the coronal model COCONUT

In this paper, we simulate the magnetic flux evolution at different heliocentric distances during two solar-maximum Carrington rotations (CRs) using the time-evolving coronal magnetohydrodynamic (MHD) model COCONUT to investigate the ``open flux problem". The simulated open magnetic flux (OMF) near the solar surface is comparable to that derived from \textit{in situ} observations by PSP and WIND satellites, and is about 5 times larger than that derived from SDO coronal hole (CH) observations, and the variation in the simulated radial solar wind speed is consistent with the evolution of the OMF evaluated around the corresponding solar disk center. We find that the OMF is reduced by up to $45\%$ from 1.01~$R_s$ to 0.1~AU and increases with a higher-resolution mesh. The OMF decreases mainly within 3~$R_s$, where the closed magnetic flux drops more rapidly, from about $60\%$ of the total magnetic flux at 1.01~$R_s$ to about $4\%$ at 3~$R_s$. Moderate adjustment of the heating source term can effectively regulate the simulated OMF. Preprocessing the photospheric magnetograms with a potential field solver that removes many high-order spherical harmonic components reduces the OMF in the low corona, while having little impact beyond 3~$R_s$. Additionally, the ratio of the maximum to the minimum OMF can reach 1.4 during a single solar maximum CR. These findings highlight the necessity of considering higher grid resolution, more realistic heating mechanisms, and the time-evolving regime of coronal MHD modeling when further addressing the ``open flux problem".

astro-ph.SR↗

COCONUT: Toward practical time-evolving Sun-to-Earth magnetohydrodynamic modeling

Due to computational efficiency and numerical stability limitations, coronal simulations constrained by static magnetograms are typically performed first and then used to drive inner-heliosphere (IH) models. In this paper, we calculate the Sun-to-Earth coronal and wind evolutions using a single time-evolving MHD model, showing that implicit MHD models have the potential to meaningfully simplify and improve the overall Sun-to-Earth modelling pipeline. We extend the implicit time-evolving coronal MHD model COCONUT out to 1 AU, and utilise it to investigate solar coronal and wind evolutions around a solar maximum Carrington rotation (CR). We compare quasi-steady-state and time-evolving Sun-to-Earth simulations to evaluate the impact of the inner-boundary magnetic field evolution, which is neglected in steady-state simulations, on background plasma parameters. Comparisons with commonly used coupled Sun-to-Earth simulations are also conducted to further validate and assess the Sun-to-Earth model COCONUT. The results show that the time-evolving implicit MHD modelling approach yields noticeable differences compared to oversimplified steady-state simulations, and is efficient enough for practical applications. Modelling the solar corona and wind using a single MHD model simplifies the modelling pipeline and avoids uncertainties associated with coupling different coronal and IH models. The noticeable differences in the temporal evolution of plasma parameters at the L1 and L5 points highlight the need to use continuously evolving, synchronised magnetic field observations to improve global coronal and solar wind simulations, whereas the overall consistent evolutionary trend reveals the reliability of using L5 observations to forecast solar wind conditions near Earth about four days in advance.

astro-ph.SR↗

Modeling complex plasma instabilities in space plasmas - Three-component electron formalism of heat-flux instabilities

Despite the fact that electrons observed in situ in space plasmas have three major components-the quasi-thermal core, suprathermal halo, and strahl-the analysis of instabilities triggered by kinetic, velocity-space anisotropies (such as relative drifts and temperature anisotropy) generally considers only two. We demonstrate that realistic modeling with all three components is achievable in the present analysis focusing on heat-flux instabilities. In the absence of particle collisions, these instabilities regulate the heat flux carried mainly by suprathermal electrons. The velocity distributions were modeled according to in situ observations, with a Maxwellian core and Kappa-distributed halo and strahl. We exploited advanced numerical codes capable of solving the linear dispersion and stability properties of plasma systems with Maxwellian and Kappa distributions. The unstable solutions differ significantly from those obtained with simplified two-component models (such as core-strahl or core-beam). The growth rates predict the excitation and interplay of two unstable modes, whistler and/or firehose heat-flux instabilities. The numerical solver 'ALPS' was successfully applied to systems with regularized Kappa distributions, for which analytical derivation of dispersion relations is not straightforward. The two instabilities are triggered by the relative drifts, core-strahl and halo-strahl, and may have new consequences for heat-flux regulation. Particularly important are cases when the core-strahl instability is in competition with the instability driven by the halo-strahl drift, as well as when the two instabilities have the same nature and accumulate. Future studies are motivated to confirm these predictions in quasilinear theories and numerical simulations.

physics.plasm-ph↗

Kinetic-based macro-modeling of the solar wind at large heliocentric distances: Kappa electrons at the exobase

Recent evidence from Parker Solar Probe on the suprathermal electrons with Kappa-type velocity distributions in the outer corona has revived interest in the kinetic-based macro-modelling of the solar (SW), aiming to explain its properties. Invoked in kinetic modelling of nonequilibrium plasmas, standard Kappa distributions (SKDs) have been adjusted to the regularized Kappa distributions (RKDs) to fix the inconsistencies of SKD and develop consistent fluid modelling of space plasmas. We propose a new analysis of these properties at large heliocentric distances based on the existence of RKD electrons at the exobase. This new semi-analytic formalism is inspired by the methodology proposed initially by Meyer-Vernet and Issautier (1998), https://doi.org/10.1029/98ja02853. Compared to SKDs, the results for RKDs have extended applicability, since all moments can be defined and calculated consistently for all values of the $κ$ parameter, even lower than the critical ones (e.g., $κ_c=3/2$ imposed to the second-order moment) of SKDs. However, the excess energy of the more energetic suprathermal electrons associated with low values of $κ\lesssim 3/2$, is regulated by the RKD-specific cutoff parameter $α< 1$. The estimates for, e.g., the temperature and bulk velocity of the SW, remain at realistic values even for small $3/2 < κ\lesssim 2$, which would otherwise exceed specific observations. One can thus model a higher abundance of suprathermal electrons at the exobase (e.g., $κ\leqslant 3/2$), which is plausible for the sources of energetic events (flares and coronal mass ejections), and also in the astrospheres of stars with coronas hotter than the Sun's.

astro-ph.SR↗

Comprehensive MHD modelling of ten successive CMEs driving a historic geomagnetic storm -- The 2024 Mothers Day event

Interacting coronal mass ejections (CMEs) result in complex heliospheric structures that can dramatically enhance their geoeffectiveness compared to isolated events. A striking example of such complex structures is that of the Mothers Day event, which occurred during 10-14 May 2024, leading to the strongest geomagnetic storm in decades. It was driven by at least ten interacting CMEs accompanied by flare and filament eruptions from the solar western hemisphere. We aim to understand its solar and heliospheric origins, variation in plasma and magnetic characteristics, and predict its geoeffectiveness. Furthermore, we focus on bringing to the community the challenges and limitations faced during themodelling of such a complex, yet important environment. We use multi-point remote observations of CMEs and employ different methods to estimate their speeds and geometry. These parameters drive the 3D magnetohydrodynamic simulations of CME evolution and heliospheric propagation in the framework of the EUHFORIA model. The best-performing simulation reproduced the arrival time of the storm and peak intensity with a lead of 2 hours, and estimated the storm strength with about 70% accuracy. This work underscores the requirements and challenges involved in accurately modelling extreme events. The major bottleneck was to constrain the CME input parameters that dictate the accuracy of the data-driven simulations. Predicting the impacts of the complex heliospheric structures during this event required the modelling of the CME-CME interactions accurately. As a community, we need to invest more in observational infrastructure while improving the speed and accuracy of our MHD forecasting models.

astro-ph.SR↗

Elongation of a Solar Filament and its Three-Dimensional Numerical Reconstruction for Magnetic Structures

Quiescent filaments are prominent features of the solar atmosphere, and their evolution reflects the coronal magnetic field's response to photospheric magnetic activity. Here, we report on a quiescent filament observed from 2023 September 28-29, aiming to understand how the magnetic configuration shapes its feet and drives its extension. For this purpose, high-resolution spectral data in H$α$ and Mg II k are used from the Télescope Héliographique pour l'Etude du Magnétisme et des Instabilités Solaires (THEMIS) and the Interface Region Imaging Spectrograph (IRIS), respectively. To track changes in the filament, we utilise long-term data from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) and from the Global Oscillation Network Group (GONG). We analyse the longitudinal magnetic field in the photosphere using the Solar Optical Telescope (SOT) onboard Hinode, as well as SDO/Helioseismic and Magnetic Imager (HMI) data. In addition to this, we use GONG H$α$ data to analyze the longitudinal oscillations in the filament. Observations show that parasitic polarities and canceling flux play a key role in forming and reorganizing the filament feet and in lengthening the filament. A 3D MHD reconstruction using vector magnetograms reveals that its magnetic configuration evolves into a full flux rope (FR), whose extension on the second day matches the observed filament growth. The FR is separated from the surrounding nearly potential field by quasi-separatrix layers, which in turn are separated by current layers. They get more organized around the FR as it is growing up. Moreover, the longitudinal oscillations in the extended filament are attributed to heating from flux cancellation in underlying bright points.

astro-ph.SR↗

Quasi-linear approach of bi-Kappa distributed electrons with dynamic $κ$ parameter. EMEC instability

In recent years, significant progress has been made in the velocity-moment-based quasi-linear (QL) theory of waves and instabilities in plasmas with nonequilibrium velocity distributions (VDs) of the Kappa (or $κ$) type. However, the temporal variation of the parameter $κ$, which quantifies the presence of suprathermal particles, is not fully captured by such a QL analysis, and typically $κ$ remains constant during plasma dynamics. We propose a new QL modeling that goes beyond the limits of a previous approach, realistically assuming that the quasithermal core cannot evolve independently of energetic suprathermals. The case study is done on the electron-cyclotron (EMEC) instability generated by anisotropic bi-Kappa electrons with $A=T_\perp/T_\parallel > 1$ ($\parallel, \perp$ denoting directions with respect to the background magnetic field). The parameter $κ$ self-consistently varies through the QL equation of kurtosis (fourth-order moment) coupled with temporal variations of the temperature components, relaxing the constraint on the independence of the low-energy (core) electrons and suprathermal high-energy tails of VDs. The results refine and extend previous approaches. A clear distinction is made between regimes that lead to a decrease or an increase in the $κ$ parameter with saturation of the instability. What predominates is a decrease in $κ$, i.e., an excess of suprathermalization, which energizes suprathermal electrons due to self-generated wave fluctuations. Additionally, we found that VDs can evolve toward a quasi-Maxwellian shape (as $κ$ increases) primarily in regimes with low beta and initial kappa values greater than five. Instability-driven relaxation only partially resolves temperature anisotropy in bi-Kappa electron VDs, as wave fluctuations generally act to further energize suprathermal electrons.

physics.plasm-ph↗

COCONUT: A coronal model with an energy decomposition strategy

In this paper, we propose an energy decomposition method combined with an HLL Riemann solver that includes an additional dissipation term in the energy equation to improve the numerical stability of the fully implicit, time-evolving coronal model COCONUT and extend its applicability to solar-maximum phases. In MHD simulations that evolve conservative variables in time, the thermal pressure is typically computed by subtracting the magnetic and kinetic energies from the total energy. In low-beta (the ratio of thermal to magnetic pressure; $< 10^{-3}$) regions, discretization errors of magnetic energy can be comparable to the thermal pressure, potentially leading to negative thermal pressure and causing the simulation to crash. Therefore, we update the decomposed energy, excluding the magnetic energy, at each time step. It avoids subtracting a large magnetic energy from the total energy to obtain a very small thermal pressure in low-$β$ regions, thereby improving the numerical stability of MHD models. We validate the algorithm using a time-evolving solar-maximum Carrington rotation simulation in 2025, which the previous code failed to run to completion. We also perform quasi-steady-state coronal simulations and 2D benchmark tests to further assess the algorithm's performance. The simulation results show that the algorithm produces results nearly identical to those obtained using the traditional full energy equation during solar minimum, while significantly improving COCONUT's ability to simulate coronal evolution under strong magnetic fields, even including fields exceeding 100 Gauss with $β<10^{-3}$. This method provides a promising approach for performing quasi-realistic coronal simulations during solar maxima.

astro-ph.SR↗

Time-evolving coronal modelling of the solar maximum around the solar storms in May 2024 by COCONUT

Time-evolving MHD coronal models deliver more realistic results than traditional quasi-steady-state models. The fully implicit time-evolving coronal model COCONUT performs efficiently enough for real-time coronal simulations during solar minimum. However, during solar maxima, the coronal magnetic field is more complex and stronger, and coronal structures evolve more rapidly than during solar minima. Time-evolving MHD coronal modelling of solar maxima often struggles with poor numerical stability and low computational efficiency. We enhanced the numerical stability of the time-evolving coronal model COCONUT to mitigate these issues with the aim to evaluate the differences between the time-evolving and quasi-steady-state coronal simulation results, and to assess the impact of the spatial resolution on global MHD coronal modelling of solar maxima. After enhancing the positivity-preserving property of COCONUT, we employed it to simulate the evolution of coronal structures within 0.1 AU in an inertial coordinate system over two CRs around the solar storms in May 2024. These simulations were performed on unstructured geodesic meshes containing 6.06, 1.52, and 0.38 M cells. We also conducted a quasi-steady-state coronal simulation that treated the solar surface as a rigidly rotating spherical shell. A comparison with observations further validated the reliability of the time-evolving coronal modelling technique. It shows that incorporating the evolution of the magnetic field on the solar surface can significantly improve the fidelity of global MHD coronal simulations around a solar maximum. A simulated magnetic field strength using a mesh with 6.06 M cells can be stronger by more than 40% than that in a mesh with 0.38 M cells. The fully implicit time-evolving model COCONUT shows promise for accurately conducting real-time global coronal simulations of solar maxima.

astro-ph.SR↗

Millimeter-Wavelength Observations of the Active Sun: Unveiling the Origins of Space Weather

Societal dependence on space-based services demands major advances in predicting the impacts of eruptive solar events. Millimeter-wavelength observations offer uniquely direct access to the time-dependent physical conditions in the atmospheric layers of the Sun where these events originate. A facility capable of full-disk, high-cadence, multi-frequency imaging would provide a transformative view of the Sun and its influence on the heliosphere. AtLAST is ideally suited to deliver this capability, and to establish a European leadership role in advancing the scientific foundations that will enable reliable, operational space-weather forecasting for the first time.

astro-ph.IM↗