arXiv Science⌕ Search

arXiv subjects

Srinath Srinivasan

Publications and source records attributed to Srinath Srinivasan.

10 recordsLinked to original sources

Beyond Leaderboard Ranks: Selecting Software Engineering Agents Under Budget Constraints

Teams that adopt LLM agents for issue resolution must decide which agent to pay for, and how much to spend finding out. Leaderboard ranks give weak evidence for this decision. Accuracy differences may be statistically unresolved, reported costs may be inconsistent, and evaluating candidate agents can itself be expensive. We investigate budget-constrained agent selection using 58,197 run--task records extracted from the Holistic Agent Leaderboard (HAL), focusing on SWE-bench and six additional benchmarks. Across seven benchmarks, 27 of 35 steps along the accuracy--cost Pareto frontiers are statistically unresolved. On SWE-bench, a run costing $34.16 trails the $170.78 leader by 14.6 percentage points, but the available tasks cannot statistically distinguish their accuracy. Reported costs also differ from standardized token-based estimates by up to 11.7x, while selective task evaluation can bias estimates of full-benchmark execution cost. We therefore compare evaluation strategies under explicit evaluation budgets and deployment-cost caps. Under advance knowledge of task costs, successive halving reaches our uncertainty-aware selection target on SWE-bench using 6.6% of exhaustive evaluation spend, achieving the lowest cost on six of seven benchmarks and tying on the seventh. Its advantage narrows when task costs are unknown before execution or exact-best selection is required. Our findings motivate decision-oriented agent evaluation that accounts for accuracy uncertainty, validates execution costs, and compares complex selection methods against simple adaptive allocation.

cs.SE↗

What Should an LLM Know? Knowledge-Guided Warm Starts for Software Optimization

Large language models (LLMs) process gigabytes in minutes; human experts work far more slowly. Prior studies that explored combinations of human/AI optimizers ignore this gap. Those studies asked systems or humans to label too many examples (e.g., SynthCore needs over four dozen per trial). Here, we test human and AI knowledge under a budget where evaluation is practical (a few dozen labels or fewer). We compare five baselines (random search, RRP, EZR, few-shot prompting, and a budget-matched SynthCore variant) against three ways to give an LLM domain knowledge before it proposes its first configurations: (1) AMP lists the domain's rules, then checks each candidate against them; (2) HKMA adds scouted data or documentation to the prompt; and (3) H-DKP has human experts correct the LLM's rules. We find that domain knowledge improves the "start-up" phase of LLM optimization, but only when that knowledge is checked, by the LLM itself or by a human expert. Across 49 datasets, unchecked knowledge did no better than few-shot prompting or EZR. On the other hand, AMP's self-checking variant (AMP-4) reached the best statistical rank in 44 of 49 datasets (budget-matched SynthCore: 23 of 49), and H-DKP did so in 7 of 8 expert studies. These checks cost little: half a cent of LLM calls per trial, or 6 to 10 expert contacts. Hence we say LLMs may not need more data, but rather their knowledge needs checking (and checking is cheap).

cs.SE↗

Continue or Restart? The Limits of Early Failure Prediction in Coding Agents

Early stopping promises to reduce compute costs for autonomous coding agents by terminating unpromising runs early. Deciding when to abandon a run requires separating baseline issue difficulty from the trajectory of an individual attempt. We study the distinction in 147,002 execution traces from two public corpora spanning four model-framework settings. Comparing pre-execution issue context against early execution prefixes, we evaluate linear count models, initial-turn text embeddings, task-conditional rankers, and a fine-tuned Qwen3-0.6B monitor. Although early prefixes modestly improve cross-task outcome ranking, within-task discrimination remains near chance across early landmarks (5k-20k tokens): initial-turn embeddings and 20k-token task-conditional models yield AUCs around 0.50, and three-seed neural evaluations across 32,406 attempts at 20k tokens achieve a mean within-task AUC of 0.50 [0.48, 0.51] across tasks of varying solve rates. To evaluate how these predictions translate into stopping decisions, we replay score-guided and matched random restarts under shared token budgets alongside uninterrupted continuation. Under a 75k-token cap, learned restarting improves resolution over matched random restarting by up to 1.98 percentage points. An exact algebraic decomposition resolves this paradox: the gain over random restarting stems almost entirely from between-task stopping allocation (avoiding stops on easy issues), whereas attempt-level selection within a task contributes near zero (-0.11 to +0.24 percentage points). Across all four settings at the 75k cap (and 216 of 224 tested budget-threshold configurations overall), uninterrupted continuation achieves higher solve rates at lower mean token cost than both restart policies. Practical evaluations of early stopping must therefore establish attempt-level discrimination and demonstrate net compute savings relative to continuation.

cs.SE↗

Can AI be Easy? Lessons Learned from the EZR.py Toolkit

Much recent press claims that developers no longer need to read code. We disagree, at least within the domain of tabular software-engineering (SE) optimization tasks: rows of $x$ and $y$ values where the $y$ values are expensive to obtain. As evidence we present 400 lines of EZR.py, a Python toolkit (no heavy dependencies) that implements Naive Bayes, $k$-means clustering, classification and regression trees, simulated annealing, local search, active learning, and complementary-Bayes text-mining relevance filtering for tabular SE data. EZR was built by repeatedly reading and refactoring AI tools to simplify and unify them. The result demonstrates that many seemingly different learning algorithms are nearly the same once stripped back to their core: classical algorithms collapse to a few lines each, and a state-of-the-art active learner fits in roughly 80 lines. Tested on the 120+ tabular SE optimization tasks in the MOOT repository, these tiny tools perform as well as or better than state-of-the-art explanation tools (SHAP, LIME), the SMAC3 optimizer, and SVM-based text-mining filters (FASTREAD), while running 500$\times$ faster than SMAC3, using orders of magnitude less labelled data, and building trees from fewer than ten variables even when thousands are available. We conclude that, within the scope of tabular SE optimization, reading and refactoring code is a useful method of generating insight, and small unified toolkits can rival large libraries. EZR is available under an open-source license. Install via \textsf{pip install ezr}; example data at \textsf{github.com/timm/moot}.

cs.SE↗

Better Together, in the Right Order: Classical-then-LLM Optimization for SE

A growing body of work combines large language models (LLMs) with classical optimizers for software engineering (SE) configuration tasks. Often, the classical optimizer is in charge: it owns the search loop and calls the LLM only to assist in subroutines (e.g. to warm-start the first generation, propose a mutation, or stand in as a surrogate). We report that there is much value in the reverse approach: seeding an LLM with the results from a cheap classical learner. We call this method SNAP2. Applied to over 100 SE tasks, it is the single best of all methods studied, reaching the top tier on 85% of tasks, ahead of the same LLM run alone (75%) and ahead of every method in which the classical optimizer retains control. It is also less expensive: relative to the LLM-alone method, it uses roughly 30% fewer tokens and runs 1.4x faster, since the classical setup performs the inexpensive work, and the LLM is invoked only to finish. We conclude that it is unwise to study classical learners or LLMs in isolation: there is much value in combining the two, and in the order that combination is applied.

cs.SE↗

MOOT: a Repository of Many Multi-Objective Optimization Tasks

Software engineers must make decisions that trade off competing goals (faster vs. cheaper, secure vs. usable, accurate vs. interpretable, etc.). Despite MSR's proven techniques for exploring such goals, researchers still struggle with these trade-offs. Similarly, industrial practitioners deliver sub-optimal products since they lack the tools needed to explore these trade-offs. To address this, MOOT (http://tiny.cc/moot) is a repository of many SE multi-objective optimization tasks. MOOT's 120+ tasks cover software configuration, cloud tuning, project health, process modeling, hyperparameter optimization, and more. Sample scripts for reading MOOT and generating baseline results are available -- just clone the repository and run the sample rqx.sh files (from tiny.cc/moot0). To the best of our knowledge, MOOT is the largest and most varied collection of real multi-objective optimization tasks in SE. We note that MOOT's novelty is infrastructural, not algorithmic-we contribute curated data and research enablement, not new optimization methods. MOOT enables harder and more credible research. MOOT lets us replace studies on toy problems (or just half a dozen hand-picked examples) with case studies on 120+ examples. Such studies could focus on stability, sample efficiency, failure modes, cross-domain generality, or many other questions (see list in this document).

cs.SE↗

Beyond the Prompt: Assessing Domain Knowledge Strategies for High-Dimensional LLM Optimization in Software Engineering

Background/Context: Large Language Models (LLMs) demonstrate strong performance on low-dimensional software engineering optimization tasks ($\le$11 features) but consistently underperform on high-dimensional problems where Bayesian methods dominate. A fundamental gap exists in understanding how systematic integration of domain knowledge (whether from humans or automated reasoning) can bridge this divide. Objective/Aim: We compare human versus artificial intelligence strategies for generating domain knowledge. We systematically evaluate four distinct architectures to determine if structured knowledge integration enables LLMs to generate effective warm starts for high-dimensional optimization. Method: We evaluate four approaches on MOOT datasets stratified by dimensionality: (1) Human-in-the-Loop Domain Knowledge Prompting (H-DKP), utilizing asynchronous expert feedback loops; (2) Adaptive Multi-Stage Prompting (AMP), implementing sequential constraint identification and validation; (3) Dimension-Aware Progressive Refinement (DAPR), conducting optimization in progressively expanding feature subspaces; and (4) Hybrid Knowledge-Model Approach (HKMA), synthesizing statistical scouting (TPE) with RAG-enhanced prompting. Performance is quantified via Chebyshev distance to optimal solutions and ranked using Scott-Knott clustering against an established baseline for LLM generated warm starts. Note that all human studies conducted as part of this study will comply with the policies of our local Institutional Review Board.

cs.SE↗

SmartOracle -- An Agentic Approach to Mitigate Noise in Differential Oracles

Differential fuzzers detect bugs by executing identical inputs across distinct implementations of the same specification, such as JavaScript interpreters. Validating the outputs requires an oracle and for differential testing of JavaScript, these are constructed manually, making them expensive, time-consuming, and prone to false positives. Worse, when the specification evolves, this manual effort must be repeated. Inspired by the success of agentic systems in other SE domains, this paper introduces SmartOracle. SmartOracle decomposes the manual triage workflow into specialized Large Language Model (LLM) sub-agents. These agents synthesize independently gathered evidence from terminal runs and targeted specification queries to reach a final verdict. For historical benchmarks, SmartOracle achieves 0.84 recall with an 18% false positive rate. Compared to a sequential Gemini 2.5 Pro baseline, it improves triage accuracy while reducing analysis time by 4$\times$ and API costs by 10$\times$. In active fuzzing campaigns, SmartOracle successfully identified and reported previously unknown specification-level issues across major engines, including bugs in V8, JavaScriptCore, and GraalJS. The success of SmartOracle's agentic architecture on Javascript suggests it might be useful other software systems- a research direction we will explore in future work.

cs.SE↗

Extracting Usable Predictions from Quantized Networks through Uncertainty Quantification for OOD Detection

OOD detection has become more pertinent with advances in network design and increased task complexity. Identifying which parts of the data a given network is misclassifying has become as valuable as the network's overall performance. We can compress the model with quantization, but it suffers minor performance loss. The loss of performance further necessitates the need to derive the confidence estimate of the network's predictions. In line with this thinking, we introduce an Uncertainty Quantification(UQ) technique to quantify the uncertainty in the predictions from a pre-trained vision model. We subsequently leverage this information to extract valuable predictions while ignoring the non-confident predictions. We observe that our technique saves up to 80% of ignored samples from being misclassified. The code for the same is available here.

cs.CV↗

The Cost of Compression: Investigating the Impact of Compression on Parametric Knowledge in Language Models

Compressing large language models (LLMs), often consisting of billions of parameters, provides faster inference, smaller memory footprints, and enables local deployment. Two standard compression techniques are pruning and quantization, with the former eliminating redundant connections in model layers and the latter representing model parameters with fewer bits. The key tradeoff is between the degree of compression and the impact on the quality of the compressed model. Existing research on LLM compression primarily focuses on performance in terms of general metrics like perplexity or downstream task accuracy. More fine-grained metrics, such as those measuring parametric knowledge, remain significantly underexplored. To help bridge this gap, we present a comprehensive analysis across multiple model families (ENCODER, ENCODER-DECODER, and DECODER) using the LAMA and LM-HARNESS benchmarks in order to systematically quantify the effect of commonly employed compression techniques on model performance. A particular focus is on tradeoffs involving parametric knowledge, with the goal of providing practitioners with practical insights to help make informed decisions on compression. We release our codebase1 to enable further research.

cs.CL↗