arXiv subjects

Soung Chang Liew

Publications and source records attributed to Soung Chang Liew.

117 records · Page 7Linked to original sources

arXiv2008

Towards a More Accurate Carrier Sensing Model for CSMA Wireless Networks

This work calls into question a substantial body of past work on CSMA wireless networks. In the majority of studies on CSMA wireless networks, a contention graph is used to model the carrier sensing relationships (CS) among links. This is a 0-1 model in which two links can either sense each other completely or not. In real experiments, we observed that this is generally not the case: the CS relationship between the links are often probabilistic and can vary dynamically over time. This is the case even if the distance between the links is fixed and there is no drastic change in the environment. Furthermore, this partial carrier sensing relationship is prevalent and occurs over a wide range of distances between the links. This observation is not consistent with the 0-1 contention graph and implies that many results and conclusions drawn from previous theoretical studies need to be re-examined. This paper establishes a more accurate CS model with the objective of laying down a foundation for future theoretical studies that reflect reality. Towards that end, we set up detailed experiments to investigate the partial carrier sensing phenomenon. We discuss the implications and the use of our partial carrier sensing model in network analysis.

cs.NI↗

arXiv2008

Bounded Mean-Delay Throughput and Non-Starvation Conditions in Aloha Network

This paper considers the requirements to ensure bounded mean queuing delay and non-starvation in a slotted Aloha network operating the exponential backoff protocol. It is well-known that the maximum possible throughput of a slotted Aloha system with a large number of nodes is 1/e = 0.3679. Indeed, a saturation throughput of 1/e can be achieved with an exponential backoff factor of r = e/(e-1)=1.5820. The binary backoff factor of r = 2 is assumed in the majority of prior work, and in many practical multiple-access networks such as the Ethernet and WiFi. For slotted Aloha, the saturation throughput 0.3466 for r = 2 is reasonably close to the maximum of 1/e, and one could hardly raise objection to adopting r = 2 in the system. However, this paper shows that if mean queuing delay is to be bounded, then the sustainable throughput when r = 2 is only 0.2158, a drastic 41% drop from 1/e . Fortunately, the optimal setting of r = 1.3757 under the bounded mean-delay requirement allows us to achieve sustainable throughput of 0.3545, a penalty of only less than 4% relative to 1/e. A general conclusion is that the value of r may significantly affect the queuing delay performance. Besides analyzing mean queuing delay, this paper also delves into the phenomenon of starvation, wherein some nodes are deprived of service for an extended period of time while other nodes hog the system. Specifically, we propose a quantitative definition for starvation and show that the conditions to guarantee bounded mean delay and non-starved operation are one of the same, thus uniting these two notions. Finally, we show that when mean delay is large and starvation occurs, the performance results obtained from simulation experiments may not converge. A quantitative discussion of this issue is provided in this paper.

cs.NI↗

arXiv2008

The Capacity Of Two Way Relay Channel

This paper investigates the capacity of a wireless two way relay channel in which two end nodes exchange information via a relay node. The capacity is defined in the information-theoretic sense as the maximum information exchange rate between the two end nodes. We give an upper bound of the capacity by applying the cut-set theorem. We prove that this upper bound can be approached in low SNR region using "separated" multiple access for uplinks from the end nodes to the relay in which the data from the end nodes are individually decoded at the relay; and network-coding broadcast for downlinks from the relay to the end nodes in which the relay mixes the information from end nodes before forwarding. We further prove that the capacity is approachable in high SNR region using physical-layer network coding (PNC) multiple access for uplinks, and network-coding broadcast for downlinks. From our proof and observations, we conjecture that the upper bound may be achieved with PNC in all SNR regions.

cs.IT↗

arXiv2008

Delay Analysis for Wireless Local Area Networks with Multipacket Reception under Finite Load

To date, most analysis of WLANs has been focused on their operation under saturation condition. This work is an attempt to understand the fundamental performance of WLANs under unsaturated condition. In particular, we are interested in the delay performance when collisions of packets are resolved by an exponential backoff mechanism. Using a multiple-vacation queueing model, we derive an explicit expression for packet delay distribution, from which necessary conditions for finite mean delay and delay jitter are established. It is found that under some circumstances, mean delay and delay jitter may approach infinity even when the traffic load is way below the saturation throughput. Saturation throughput is therefore not a sound measure of WLAN capacity when the underlying applications are delay sensitive. To bridge the gap, we define safe-bounded-mean-delay (SBMD) throughput and safe-bounded-delay-jitter (SBDJ) throughput that reflect the actual network capacity users can enjoy when they require bounded mean delay and delay jitter, respectively. The analytical model in this paper is general enough to cover both single-packet reception (SPR) and multi-packet reception (MPR) WLANs, as well as carrier-sensing and non-carrier-sensing networks. We show that the SBMD and SBDJ throughputs scale super-linearly with the MPR capability of a network. Together with our earlier work that proves super-linear throughput scaling under saturation condition, our results here complete the demonstration of MPR as a powerful capacity-enhancement technique for both delay-sensitive and delay-tolerant applications.

cs.NI↗

arXiv2008

Proportional Fairness in Multi-channel Multi-rate Wireless Networks-Part II: The Case of Time-Varying Channels

This is Part II of a two-part paper series that studies the use of the proportional fairness (PF) utility function as the basis for capacity allocation and scheduling in multi-channel multi-rate wireless networks. The contributions of Part II are twofold. (i) First, we extend the problem formulation, theoretical results, and algorithms to the case of time-varying channels, where opportunistic capacity allocation and scheduling can be exploited to improve system performance. We lay down the theoretical foundation for optimization that "couples" the time-varying characteristic of channels with the requirements of the underlying applications into one consideration. In particular, the extent to which opportunistic optimization is possible is not just a function of how fast the channel characteristics vary, but also a function of the elasticity of the underlying applications for delayed capacity allocation. (ii) Second, building upon our theoretical framework and results, we study subcarrier allocation and scheduling in orthogonal frequency division multiplexing (OFDM) cellular wireless networks. We introduce the concept of a W-normalized Doppler frequency to capture the extent to which opportunistic scheduling can be exploited to achieve throughput-fairness performance gain. We show that a "look-back PF" scheduling can strike a good balance between system throughput and fairness while taking the underlying application requirements into account.

cs.PF↗

arXiv2008

Proportional Fairness in Multi-channel Multi-rate Wireless Networks-Part I: The Case of Deterministic Channels

This is Part I of a two-part paper series that studies the use of the proportional fairness (PF) utility function as the basis for capacity allocation and scheduling in multi-channel multi-rate wireless networks. The contributions of Part I are threefold. (i) First, we lay down the theoretical foundation for PF. Specifically, we present the fundamental properties and physical/economic interpretation of PF. We show by general mathematical arguments that PF leads to equal airtime allocation to users for the single-channel case; and equal equivalent airtime allocation to users for the multi-channel case, where the equivalent airtime enjoyed by a user is a weighted sum of the airtimes enjoyed by the user on all channels, with the weight of a channel being the price or value of that channel. We also establish the Pareto efficiency of PF solutions. (ii) Second, we derive characteristics of PF solutions that are useful for the construction of PF-optimization algorithms. We present several PF-optimization algorithms, including a fast algorithm that is amenable to parallel implementation. (iii) Third, we study the use of PF utility for capacity allocation in large-scale WiFi networks consisting of many adjacent wireless LANs. We find that the PF solution simultaneously achieves higher system throughput, better fairness, and lower outage probability with respect to the default solution given by today's 802.11 commercial products. Part II of this paper series extends our investigation to the time-varying-channel case in which the data rates enjoyed by users over the channels vary dynamically over time

cs.NI↗

arXiv2007

Wireless Local Area Networks with Multiple-Packet Reception Capability

Thanks to its simplicity and cost efficiency, wireless local area network (WLAN) enjoys unique advantages in providing high-speed and low-cost wireless services in hot spots and indoor environments. Traditional WLAN medium-access-control (MAC) protocols assume that only one station can transmit at a time: simultaneous transmissions of more than one station causes the destruction of all packets involved. By exploiting recent advances in PHY-layer multiuser detection (MUD) techniques, it is possible for a receiver to receive multiple packets simultaneously. This paper argues that such multipacket reception (MPR) capability can greatly enhance the capacity of future WLANs. In addition, it provides the MAC-layer and PHY-layer designs needed to achieve the improved capacity. First, to demonstrate MUD/MPR as a powerful capacity-enhancement technique, we prove a "super-linearity" result, which states that the system throughput per unit cost increases as the MPR capability increases. Second, we show that the commonly deployed binary exponential backoff (BEB) algorithm in today's WLAN MAC may not be optimal in an MPR system, and that the optimal backoff factor increases with the MPR capability: the number of packets that can be received simultaneously. Third, based on the above insights, we design a joint MAC-PHY layer protocol for an IEEE 802.11-like WLAN that incorporates advanced PHY-layer blind detection and MUD techniques to implement MPR

cs.PF↗

arXiv2007

Many-to-One Throughput Capacity of IEEE 802.11 Multi-hop Wireless Networks

This paper investigates the many-to-one throughput capacity (and by symmetry, one-to-many throughput capacity) of IEEE 802.11 multi-hop networks. It has generally been assumed in prior studies that the many-to-one throughput capacity is upper-bounded by the link capacity L. Throughput capacity L is not achievable under 802.11. This paper introduces the notion of "canonical networks", which is a class of regularly-structured networks whose capacities can be analyzed more easily than unstructured networks. We show that the throughput capacity of canonical networks under 802.11 has an analytical upper bound of 3L/4 when the source nodes are two or more hops away from the sink; and simulated throughputs of 0.690L (0.740L) when the source nodes are many hops away. We conjecture that 3L/4 is also the upper bound for general networks. When all links have equal length, 2L/3 can be shown to be the upper bound for general networks. Our simulations show that 802.11 networks with random topologies operated with AODV routing can only achieve throughputs far below the upper bounds. Fortunately, by properly selecting routes near the gateway (or by properly positioning the relay nodes leading to the gateway) to fashion after the structure of canonical networks, the throughput can be improved significantly by more than 150%. Indeed, in a dense network, it is worthwhile to deactivate some of the relay nodes near the sink judiciously.

cs.NI↗

arXiv2007

Effective Beam Width of Directional Antennas in Wireless Ad Hoc Networks

It is known at a qualitative level that directional antennas can be used to boost the capacity of wireless ad hoc networks. Lacking is a measure to quantify this advantage and to compare directional antennas of different footprint patterns. This paper introduces the concept of the effective beam width (and the effective null width as its dual counterpart) as a measure which quantitatively captures the capacity-boosting capability of directional antennas. Beam width is commonly defined to be the directional angle spread within which the main-lobe beam power is above a certain threshold. In contrast, our effective beam width definition lumps the effects of the (i) antenna pattern, (ii) active-node distribution, and (iii) channel characteristics, on network capacity into a single quantitative measure. We investigate the mathematical properties of the effective beam width and show how the convenience afforded by these properties can be used to analyze the effectiveness of complex directional antenna patterns in boosting network capacity, with fading and multi-user interference taken into account. In particular, we derive the extent to which network capacity can be scaled with the use of phased array antennas. We show that a phased array antenna with N elements can boost transport capacity of an Aloha-like network by a factor of order N^1.620.

cs.IT↗