arXiv subjects

Sofie Pollin

Publications and source records attributed to Sofie Pollin.

At least 19 recordsLinked to original sources

arXiv2026

RT-VSS: In-House Ray Tracing for Vital Signs Sensing in the FR3 Band

Vital Signs Sensing, enabled by the evolution of wireless communications, is inherently challenging as the chest's micro-Doppler signatures can be corrupted by multipath, body movement and noise. Additionally, the prospects of the Frequency Range (FR) 3 band, spanning 7-24 GHz, are compelling due to centimeter-scale wavelength improving phase sensitivity to chest motion, while its abundant bandwidth and rich multipath enhance temporal and spatial diversity. In this paper, we validate the feasibility of using cellular communications in the FR3 band to monitor a human's breathing and heartbeat in an indoor environment. Using Blender to model physiologically accurate vital-signs signals as ground truth and Sionna Ray Tracing simulations, we find that it is feasible to extract breathing and heartbeat waveforms at FR3 frequencies. Furthermore, we perform a comparative analysis of ISAC performance against representative sub-6 GHz (FR1) and mmWave (FR2) frequencies, indicating the utility of the study across the frequency bands.

eess.SP↗

arXiv2026

Packet-Level Complex CIR Tracking for Communication-Native mmWave Sensing: An 802.11ad Testbed

Commercial millimetre-wave (mmWave) Wi-Fi platforms based on IEEE 802.11ad/ay have demonstrated sensing capabilities, but they provide limited visibility into the packet-level measurements and synchronisation mechanisms that determine temporal coherence. We present a programmable 60~GHz IEEE 802.11ad testbed that exposes the complete complex 128-tap channel impulse response (CIR) for every detected packet. This access exposes packet-to-packet delay shifts and common phase drift that commercial-transceiver studies generally do not characterise. We develop a delay-profile alignment method and define a static-reference relative CIR phase that cancels common drift while preserving target-induced variation. We use 30~s respiration sensing to evaluate long-term phase stability for sub-wavelength motion tracking. Across 39 recordings, median absolute waveform correlation increases from 0.41 (timestamp regularised) to 0.52 (delay aligned) and 0.61 (relative-phase calibrated); breathing-rate mean absolute error decreases from 5.1 to 4.1 and 3.6~breaths/min. The results demonstrate controlled characterisation and stabilisation of communication-native WiGig CIR measurements on a fully programmable physical layer.

eess.SP↗

arXiv2026

First Galileo SAS Authenticated Time Solution

Spoofing attacks against civilian GNSS receivers have grown more common, especially near conflict zones where they now disrupt civil aviation, maritime operations, and critical infrastructure on a daily basis. Spoofing is possible because legacy civil GNSS signals are largely predictable in both their navigation data and ranging codes, allowing an attacker to forge a signal that imposes a false position and time on an unsuspecting receiver. Cryptographic authentication schemes such as Galileo's Open Service Navigation Message Authentication (OSNMA) mitigate this threat by verifying the authenticity of the navigation data. The ranging code itself, however, remains unprotected. To close this gap, Galileo is introducing a Signal Authentication Service (SAS) in the E6-C signal, which directly authenticates ranging measurements. SAS is currently transmitted by only two satellites in an elliptical orbital plane, of which at most one is visible at a time, meaning a full position solution is not yet possible; however, a georeferenced receiver can still obtain an authenticated time solution. This paper presents, to the authors' knowledge, for the first time, a timing solution computed from an authenticated civil GNSS signal. We develop a snapshot software receiver implementing a simplified version of the Galileo SAS protocol to compute the receiver clock bias from an authenticated pseudorange, using radio-frequency data recorded with an engineering prototype software-defined radio receiver from Septentrio. We evaluate the resulting timing solution using recordings from both SAS-capable satellites collected at different locations, demonstrating the feasibility of authenticated timing ahead of full SAS operational deployment.

cs.CR↗

arXiv2026

Analysis and Approximation of a Spatially Wideband Antenna Array Factor

This work investigates the spatially wideband (SWB) antenna array factor (AF) of uniform linear arrays. First, the SWB AF approximation is derived for narrowband (NB) signals and a large aperture with element spacing satisfying the Nyquist criterion. The derivation accounts for different spatial and spectral windows. Next, an approximation of the SWB AF for a wideband (WB) signal is developed under uniform spatial and spectral weighting. The analysis shows that for fully populated arrays, increasing the bandwidth effectively suppresses the AF sidelobes. Finally, a universal SWB AF approximation is introduced, which is based on recognizing the SWB AF as a spatially variant convolution. In this formulation, the SWB AF is expressed as a convolution of the spatially narrowband (SNB) AF and the SWB kernel, providing insight into how the bandwidth and the spectral weighting affect the resulting SWB AF. The proposed approximation is shown to be accurate for a wide range of bandwidths and element spacings, including sparse arrays. In particular, for sparse arrays, the bandwidth enables suppression of grating-lobe amplitudes by spreading their energy over a wider angular range. An approximation of the grating lobe envelope as a function of the bandwidth-aperture product is provided.

eess.SP↗

arXiv2026

Near-Field Velocity Estimation and Doppler-Aware Localization in OFDM Massive MIMO

In Orthogonal Frequency Division Multiplexing (OFDM)-based massive Multiple-Input Multiple-Output (MIMO) near-field (NF) sensing, target motion induces an antenna-dependent bistatic Doppler variation across the array aperture. Ignoring this spatial Doppler variation leads to a model mismatch that degrades NF localization. In this paper, we propose a low-complexity recursive framework for joint radial/transverse velocity estimation and Doppler-aware localization. Initialized by a constant-Doppler coarse localization, the method alternates between closed-form Least Squares Estimator (LSE)-based velocity estimation and antenna-dependent Doppler-aware localization refinement. Simulation and measurement results demonstrate the effectiveness of the proposed framework against two benchmark methods. Compared with a low-complexity constant-Doppler baseline method, the proposed algorithm improves range, angle, and radial velocity estimation results, while also enabling transverse velocity estimation. In the measurement results, the overall localization error decreases from 0.268 m to 0.064 m. The radial and transverse velocity estimation errors are 0.032 m/s and 0.069 m/s, respectively. Compared with a high-complexity exhaustive four-dimensional (4D) Maximum Likelihood Estimator (MLE), the proposed method achieves comparable velocity estimation results while yielding a more accurate localization result when the 4D MLE has a practical finite search grid.

eess.SP↗

arXiv2026

Depthwise Separable CNN for D-MIMO Indoor Localization with Data Reduction

Indoor localization using Distributed Multiple-Input Multiple-Output (D-MIMO) and machine learning (ML) achieves sub-centimeter accuracy but faces midhaul capacity bottlenecks when transmitting raw Channel State Information (CSI) in Open Radio Access Networks (O-RAN) architectures. To address this, we propose a lightweight, distributed ML framework that shifts initial processing to the network edge. By deploying localized models as dApps on Distributed Units (DUs), each requiring just 1.39 MB of memory and 1.96 MFLOPs, the system performs CSI feature extraction and reduction on the edge. The reduced low-dimensional features are transmitted to the Central Unit (CU), where another dApp is deployed for location estimation. Evaluated on a high-density dataset, this framework reduces midhaul traffic by 100x while maintaining an average error of 8.5 mm, even with half the deployed Radio Units (RUs), providing a scalable blueprint for practical D-MIMO localization.

eess.SP↗

arXiv2026

Aliased Time-Modulated Array OFDM Transmit System

The time-modulated array is a simple array architecture in which each antenna is connected to an RF switch that serves as a modulator. The phase shift is achieved by digitally controlling the relative delay between the periodic modulating sequences of the antennas. Two factors limit the practical use of this architecture for communication and sensing. First, the switching frequency is high, as it must be a multiple of the sampling frequency. Second, the discrete modulating sequence introduces undesired harmonic replicas of the signal, which are out-of-band interference. This paper proposes the OFDM modulation with an appropriate precoder to facilitate the aliasing of the harmonic components to simultaneously reduce sideband radiation and switching frequency. The transmit signal has a repeated block structure in the frequency domain to facilitate coherent combining of the aliased signal blocks. As a result, a factor $A$ reduction in switching frequency is achieved at the cost of a factor $A$ reduction in communication capacity. Doubling $A$ reduces sideband radiation by around 2.9 dB. The feasibility of the proposed method is experimentally validated for wideband signals. Full-wave simulations are performed to validate the beamforming performance based on the experimental results.

eess.SP↗

arXiv2026

Low Complexity Neural Network Digital Predistortion of Wideband Power Amplifiers through Feature Selection

Due to the continuous increase in communication bandwidth and the use of highly efficient yet nonlinear power amplifiers, Digital Predistortion (DPD) algorithms are becoming increasingly complex. In particular, neural network (NN) based DPD approaches using Phase-Normalized NN architectures often incur substantially higher computational costs than widely deployed polynomial-based methods, such as the Memory Polynomial (MP) and Generalized Memory Polynomial (GMP) models. To bridge this gap between research performance and practical implementation, we propose a low-complexity Feature Selection NN DPD architecture. The proposed method employs an offline feature-engineering pipeline based on the Least Absolute Shrinkage and Selection Operator (LASSO) and the Minimum Redundancy Maximum Relevance (MRMR) algorithm to construct a compact and informative input representation. Using measured wideband FR3 power amplifier datasets that are publicly released with this work, we demonstrate up to 30% reduction in computational complexity while maintaining comparable linearization performance.

eess.SP↗

arXiv2026

Multi-/Uni-Cast Non-Orthogonal Multiple Access-Based INAC

With the rapid development of satellite communication and navigation, there is an urgent need to integrate both technologies to achieve reliable communication and precise navigation services within the same satellite system. By combining multi-/uni-cast (MUC) and non-orthogonal multiple access (NOMA) technologies, we propose a novel MUC-NOMA-based integrated navigation and communication (INAC) signal structure, in which the navigation and communication signals share a common pseudo noise (PN) sequence, thereby integrating satellite communication and navigation at the signal level. According to different power allocation strategies, two scenarios are defined: multi-cast-oriented (MO-) INAC and uni-cast-oriented (UO-) INAC, where a greater portion of power is assigned to either the multi-cast or the uni-cast signal, respectively. To mitigate co-channel interference, we employ successive interference cancellation (SIC) at the receiver and design a signal processing algorithm for the proposed INAC signal. Then, closed-form expressions are subsequently derived for the bit error rates (BER) of both the navigation and communication signals, along with the positioning accuracy of the navigation signal. To gain further insights, the impacts of power allocation factors and communication rates are evaluated. Our analysis results show that: i) In the MO-INAC scenario, the positioning and BER performance of navigation signal are excellent when more power is assigned to the multi-cast signal; ii) In the UO-INAC scenario, interference in the shared resources is reduced when more power is assigned to the uni-cast signal; iii) The ranging accuracy decreases as the communication data rate increases. Numerical results confirm the superior BER and positioning accuracy of the MO-INAC scenario for MEO satellites.

eess.SP↗

arXiv2026

Joint Mobile User Positioning and Passive Target Sensing using Optimized Sequential Beamforming

Integrated sensing and communication (ISAC) relies on monostatic sensing (MS) and bistatic positioning (BP) to enable comprehensive environmental awareness and user localization. However, existing frameworks predominantly assume static geometries and optimize these modalities independently, neglecting user mobility and sequential information sharing. In this paper, we propose a velocity-aware sequential beamforming framework that dynamically couples MS and BP in time. We derive the Cramer-Rao bounds (CRBs) in the position domain to formulate a non-convex resource allocation problem. Instead of relying on static weighted-sum tradeoffs, we introduce a sequential Bayesian optimization strategy where MS is executed first to construct a reliable structural prior on the UE and passive targets (PTs). This covariance prior is subsequently passed to the UE to regularize the BP estimation stage. We demonstrate that optimizing a single shared beamformer globally across both phases yields superior synergistic gains compared to a two-stage greedy approach. Simulation results validate that the shared sequential design efficiently balances limited symbol resources, achieving centimeter-level positioning accuracy for both the UE and PTs, robust velocity estimation, and a significantly reduced computational runtime.

eess.SP↗

arXiv2026

Disaggregated multi-domain interference classification for O-RAN

Spectrum sharing and dynamic spectrum reuse are becoming increasingly critical in modern wireless networks to address spectrum scarcity. However, these techniques inevitably increase Cross-Technology Interference (CTI). In this context, the Open Radio Access Network (O-RAN), as a modern and disaggregated network architecture, necessitates accurate, low-latency, and computationally efficient CTI classification and mitigation to support real-time control and maintain Quality of Service (QoS). Unfortunately, existing solutions predominantly rely on high-complexity, monolithic deep learning-based solutions that, while achieving high classification accuracy, incur significant latency and computational overhead This paper exploits the O-RAN functional split to leverage multi-domain raw signal representations (time, frequency, and Channel State Information (CSI)) directly from the same data stream. Each domain is processed locally, naturally interleaving CTI within the distributed, disaggregated O-RAN architecture. This distributed strategy enables a cost-aware, multi-domain fusion architecture that balances classification accuracy with computational overhead and latency. Our proposed multi-domain distributed architecture achieves a 400 $μs$ inference latency on standard CPUs. Compared to a state-of-the-art monolithic frequency-domain classifier, this represents an average 9x reduction in latency and an 11-fold decrease in computational cost, while sacrificing only 4% in classification performance and maintaining >90% accuracy in high-interference conditions.

eess.SP↗

arXiv2026

Resource Allocation in Hybrid Radio-Optical IoT Networks using GNN with Multi-task Learning

This paper addresses the problem of dual-technology scheduling in hybrid Internet-of-Things (IoT) networks that integrate Optical Wireless Communication (OWC) with Radio Frequency (RF). We first present an optimization formulation that jointly maximizes throughput and minimizes delivery-based Age of Information (AoI) between access points and IoT nodes under energy and link availability constraints. However, solving such NP-hard problems at scale is computationally intractable and typically assumes full channel observability, which is impractical in real deployments. To address this challenge, we propose the Dual-Graph Embedding with Transformer (DGET) framework, a supervised multi-task learning architecture that combines a two-stage Graph Neural Network (GNN) with a Transformer encoder. The first stage employs a transductive GNN to encode the known graph topology together with initial node and link states, such as energy levels, available links, and queued transmissions. The second stage introduces an inductive GNN for temporal refinement, enabling the model to generalize these embeddings to evolving network states while capturing variations in energy and queue dynamics over time through a consistency loss. The resulting embeddings are then processed by a Transformer-based classifier that models cross-link dependencies using multi-head self-attention. Simulation results show that hybrid RF-OWC networks outperform standalone RF systems by supporting higher traffic loads and reducing AoI by up to 20% while maintaining comparable energy consumption. Compared with optimization-based methods, the proposed DGET framework achieves near-optimal scheduling with over 90% classification accuracy, lower computational complexity, and improved robustness under partial channel observability.

cs.NI↗

arXiv2026

Data Augmentation and Attention for massive MIMO-based Indoor Localization in Changing Environments

The demand for high-precision indoor localization has grown significantly with the rise of smart environments, industrial automation, and location-aware applications. While massive Multiple-Input and Multiple-Output (MIMO) systems enable millimeter-level accuracy by leveraging rich Channel State Information (CSI), most existing solutions are optimized for static environments, where users or devices remain fixed during data collection and inference. Real-world applications, however, often require real-time localization in changing environments, where rapid movement, unpredictable blockages, and dynamic channel conditions pose significant challenges. To address these challenges, we introduce two data augmentation techniques designed to resemble blocked antennas, enhancing the generalizability of localization models to dynamic scenarios. Additionally, we enhance an existing Deep Learning (DL) model by incorporating attention modules, improving its ability to focus on relevant channel features and antennas. We train our model on data from a static scenario, augmented with the proposed techniques, and evaluate it on a dataset collected in changing scenarios. We investigate the performance enhancements achieved by the data augmentation techniques and the Attention modules, and observe a localization accuracy improvement from a mean error of 286 mm, when trained without Attention and without data augmentations, to 66 mm, when trained with Attention and data augmentation. This shows that high localization accuracy can be maintained in changing environments, even without training data from those scenarios.

eess.SY↗

arXiv2026

Analysis of the Range Ambiguity Function of Narrowband Near-field MIMO Sensing

This paper compares the sensing performance of a narrowband near-field system across several practical antenna array geometries and SIMO/MISO and MIMO configurations. For identical transmit and receive apertures, MIMO processing is equivalent to squaring the near-field array factor, resulting in improved beamdepth and sidelobe level. Analytical derivations, supported by simulations, show that the MIMO processing improves the maximum near-field sensing range and resolution by approximately a factor of 1.4 compared to a single-aperture system. Using a quadratic approximation of the mainlobe of the array factor, an analytical improvement factor of $\sqrt{2}$ is derived, validating the numerical results. Finally, MIMO is shown to improve the poor sidelobe performance observed in the near-field by a factor of two, due to squaring of the array factor.

eess.SP↗

arXiv2026

Sequential Processing Strategies in Fronthaul Constrained Cell-Free Massive MIMO Networks

In a cell-free massive MIMO (CFmMIMO) network with a daisy-chain fronthaul, the amount of information that each access point (AP) needs to communicate with the next AP in the chain is determined by the location of the AP in the sequential fronthaul. Therefore, we propose two sequential processing strategies to combat the adverse effect of fronthaul compression on the sum of users' spectral efficiency (SE): 1) linearly increasing fronthaul capacity allocation among APs and 2) Two-Path users' signal estimation. The two strategies show superior performance in terms of sum SE compared to the equal fronthaul capacity allocation and Single-Path sequential signal estimation.

eess.SP↗

arXiv2026

Dualband OFDM Delay Estimation for Multi-Target Localization

Integrated localization and communication systems aim to reuse communication waveforms for simultaneous data transmission and localization, but delay resolution is fundamentally limited by the available bandwidth. In practice, large contiguous bandwidths are difficult to obtain due to hardware constraints and spectrum fragmentation. Aggregating non-contiguous narrow bands can increase the effective frequency span, but a non-contiguous frequency layout introduces challenges such as elevated sidelobes and ambiguity in delay estimation. This paper introduces a point-spread-function (PSF)-centric framework for dual-band OFDM delay estimation. We model the observed delay profile as the convolution of the true target response with a PSF determined by the dual-band subcarrier selection pattern, explicitly linking band configuration to resolution and ambiguity. To suppress PSF-induced artifacts, we adapt the RELAX algorithm for dual-band multi-target delay estimation. Simulations demonstrate improved robustness and accuracy in dual-band scenarios, supporting ILC under fragmented spectrum.

eess.SP↗

arXiv2026

Experimental Characterization of ISAC Channel Mapping and Environment Awareness

In the context of integrated sensing and communications (ISAC), this paper presents an experimental investigation of the relationship between monostatic sensing and naturally bistatic communication channels in an indoor millimeter-wave environment. We characterize the propagation channel in the joint delay--angle domain, extract dominant multipath components (MPCs) and associate them with physical scatterers in the environment, and demonstrate how communication MPCs can be explicitly recovered from sensing channels. Finally, the radar cross-sections (RCSs) of two key scatterers, namely the wall and metal plate, are obtained based on calibrated channel power and reconstructed propagation distances.

eess.SY↗

arXiv2026

Approximation of the Range Ambiguity Function in Near-field Sensing Systems

This paper investigates the range ambiguity function of near-field systems where bandwidth and near-field beamfocusing jointly determine the resolution. First, the general matched filter ambiguity function is derived and the near-field array factors of different antenna array geometries are introduced. Next, the near-field ambiguity function is approximated as a product of the range-dependent near-field array factor and the ambiguity function due to the utilized waveform and bandwidth. An approximation criterion based on the aperture-bandwidth product is formulated, and its accuracy is examined. Finally, the improvements to the ambiguity function offered by the near-field beamfocusing, as compared to the far-field case, are presented. The performance gains are evaluated in terms of resolution improvement offered by beamfocusing, peak-to-sidelobe and integrated-sidelobe level improvement for a few popular array geometries. The gains offered by the near-field regime are shown to be range-dependent and substantial only in close proximity to the array.

eess.SP↗