arXiv subjects

Siyun Yang

Publications and source records attributed to Siyun Yang.

7 recordsLinked to original sources

arXiv2026

Signal Processing Foundations of Reconfigurable Antennas in the Tri-Hybrid MIMO Architecture

To enable larger apertures in multipleinput multipleoutput MIMO systems the trihybrid MIMO architecture offers a promising lowcost and lowpower solution by introducing reconfigurable antennas as a third layer of precoding on top of conventional digital and analog processing In this paper we develop a unified signal processing framework for trihybrid MIMO that explicitly captures the electromagnetic EM characteristics of diverse reconfigurable antenna technologies We first propose a generic inputoutput model that incorporates the reconfigurable antenna layer into an effective channel representation revealing a fundamental coupling between the channel precoder and radiated power Building on this model we formulate a general optimization problem that jointly accounts for digital analog and antennadomain precoding under hardware and power constraints We then instantiate this framework across seven representative reconfigurable antenna architectures including parasitic arrays dynamic metasurface antennas fluidpixel antennas polarizationreconfigurable antennas stacked intelligent metasurfaces pinching antenna systems and nonradiating wires To systematically compare these heterogeneous architectures we introduce a new metric the reconfigurability efficiency factor REF which quantifies the performance gains achievable through antenna reconfiguration under realistic constraints Numerical results demonstrate the tradeoffs among aperture size power consumption hardware complexity and spectral efficiency Our results establish that EMlevel reconfiguration reshapes the signal processing design space highlighting the need for new architectures and algorithms that jointly optimize across digital analog and electromagnetic domains This work reveals that electromagnetic reconfiguration couples the channel and precoder

eess.SP↗

arXiv2026

Jointly Optimizing Debiased CTR and Uplift for Coupons Marketing: A Unified Causal Framework

In online advertising, marketing interventions such as coupons introduce significant confounding bias into Click-Through Rate (CTR) prediction. Observed clicks reflect a mixture of users' intrinsic preferences and the uplift induced by these interventions. This causes conventional models to miscalibrate base CTRs, which distorts downstream ranking and billing decisions. Furthermore, marketing interventions often operate as multi-valued treatments with varying magnitudes, introducing additional complexity to CTR prediction. To address these issues, we propose the Unified Multi-Valued Treatment Network (UniMVT). Specifically, UniMVT disentangles confounding factors from treatment-sensitive representations, enabling a full-space counterfactual inference module to jointly reconstruct the debiased base CTR and intensity-response curves. To handle the complexity of multi-valued treatments, UniMVT employs an auxiliary intensity estimation task to capture treatment propensities and devise a unit uplift objective that normalizes the intervention effect. This ensures comparable estimation across the continuous coupon-value spectrum. UniMVT simultaneously achieves debiased CTR prediction for accurate system calibration and precise uplift estimation for incentive allocation. Extensive experiments on synthetic and industrial datasets demonstrate UniMVT's superiority in both predictive accuracy and calibration. Furthermore, real-world A/B tests confirm that UniMVT significantly improves business metrics through more effective coupon distribution.

cs.SI↗

arXiv2025

Near-Field Challenges in Ultra-Wideband ISAC: Beamforming Strategies and System Insights

The shift toward sixth-generation (6G) wireless networks places integrated sensing and communications (ISAC) at the core of future applications such as autonomous driving, extended reality, and smart manufacturing. However, the combination of large antenna arrays and ultra-wide bandwidths brings near-field propagation effects and beam squint to the forefront, fundamentally challenging traditional far-field designs. True time delay units (TTDs) offer a potential solution, but their cost and hardware complexity limit scalability. In this article, we present practical beamforming strategies for near-field ultra-wideband ISAC systems. We explore codebook designs across analog and digital domains that mitigate beam squint, ensure reliable user coverage, and enhance sensing accuracy. We further validate these approaches through large-scale system-level simulations, including 3D map-based evaluations that reflect real-world urban environments. Our results demonstrate how carefully designed beamforming can balance communication throughput with sensing performance, achieving reliable coverage and efficient resource use even under severe near-field conditions. We conclude by highlighting open challenges in hardware, algorithms, and system integration, pointing toward research directions that will shape the deployment of 6G-ready ISAC networks.

eess.SP↗

arXiv2025

Embracing Reconfigurable Antennas in the Tri-hybrid MIMO Architecture for 6G and Beyond

Multiple-input multiple-output (MIMO) communication has led to immense enhancements in data rates and efficient spectrum management. The evolution of MIMO, though, has been accompanied by increased hardware complexity and array sizes, causing the system power consumption to increase. Despite past advances in power-efficient hybrid architectures, new solutions are needed to enable extremely large-scale MIMO deployments for 6G and beyond. In this paper, we introduce a novel architecture that integrates low-power reconfigurable antennas with both digital and analog precoding. This \emph{tri-hybrid} approach addresses key limitations in traditional and hybrid MIMO systems by improving power consumption and adds a new layer for signal processing. We provide an analysis of the proposed architecture and compare its performance with existing solutions, including fully-digital and hybrid MIMO systems. The results demonstrate significant improvements in energy efficiency, highlighting the potential of the tri-hybrid system to meet the growing demands of future wireless networks. We conclude the paper with a summary of design and implementation challenges, including the need for technological advancements in reconfigurable array hardware and tunable antenna parameters.

cs.IT↗

arXiv2021

Power analysis for cluster randomized trials with continuous co-primary endpoints

Pragmatic trials evaluating health care interventions often adopt cluster randomization due to scientific or logistical considerations. Previous reviews have shown that co-primary endpoints are common in pragmatic trials but infrequently recognized in sample size or power calculations. While methods for power analysis based on $K$ ($K\geq 2$) binary co-primary endpoints are available for CRTs, to our knowledge, methods for continuous co-primary endpoints are not yet available. Assuming a multivariate linear mixed model that accounts for multiple types of intraclass correlation coefficients (endpoint-specific ICCs, intra-subject ICCs and inter-subject between-endpoint ICCs) among the observations in each cluster, we derive the closed-form joint distribution of $K$ treatment effect estimators to facilitate sample size and power determination with different types of null hypotheses under equal cluster sizes. We characterize the relationship between the power of each test and different types of correlation parameters. We further relax the equal cluster size assumption and approximate the joint distribution of the $K$ treatment effect estimators through the mean and coefficient of variation of cluster sizes. Our simulation studies with a finite number of clusters indicate that the predicted power by our method agrees well with the empirical power, when the parameters in the multivariate linear mixed model are estimated via the expectation-maximization algorithm. An application to a real CRT is presented to illustrate the proposed method.

stat.ME↗

arXiv2021

Covariate adjustment in subgroup analyses of randomized clinical trials: A propensity score approach

Background: Subgroup analyses are frequently conducted in randomized clinical trials to assess evidence of heterogeneous treatment effect across patient subpopulations. Although randomization balances covariates within subgroups in expectation, chance imbalance may be amplified in small subgroups and harm the precision. Covariate adjustment in overall analysis of RCT is often conducted, via either ANCOVA or propensity score weighting, but for subgroup analysis has been rarely discussed. In this article, we develop propensity score weighting methodology for covariate adjustment to improve the precision and power of subgroup analyses in RCTs. Methods: We extend the propensity score weighting methodology to subgroup analyses by fitting a logistic propensity model with pre-specified covariate-subgroup interactions. We show that, by construction, overlap weighting exactly balances the covariates with interaction terms in each subgroup. Extensive simulations were performed to compare the operating characteristics of unadjusted, different propensity score weighting and the ANCOVA estimator. We apply these methods to the HF-ACTION trial to evaluate the effect of exercise training on 6-minute walk test in pre-specified subgroups. Results: Standard errors of the adjusted estimators are smaller than those of the unadjusted estimator. The propensity score weighting estimator is as efficient as ANCOVA, and is often more efficient when subgroup sample size is small (e.g.<125), and/or when outcome model is misspecified. The weighting estimators with full-interaction propensity model consistently outperform the standard main-effect propensity model. Conclusion: Propensity score weighting is a transparent and objective method to adjust chance imbalance of important covariates in subgroup analyses of RCTs. It is crucial to include the full covariate-subgroup interactions in the propensity score model.

stat.ME↗

arXiv2020

Propensity Score Weighting for Causal Subgroup Analysis

A common goal in comparative effectiveness research is to estimate treatment effects on pre-specified subpopulations of patients. Though widely used in medical research, causal inference methods for such subgroup analysis remain underdeveloped, particularly in observational studies. In this article, we develop a suite of analytical methods and visualization tools for causal subgroup analysis. First, we introduce the estimand of subgroup weighted average treatment effect and provide the corresponding propensity score weighting estimator. We show that balancing covariates within a subgroup bounds the bias of the estimator of subgroup causal effects. Second, we design a new diagnostic graph -- the Connect-S plot -- for visualizing the subgroup covariate balance. Finally, we propose to use the overlap weighting method to achieve exact balance within subgroups. We further propose a method that combines overlap weighting and LASSO, to balance the bias-variance tradeoff in subgroup analysis. Extensive simulation studies are presented to compare the proposed method with several existing methods. We apply the proposed methods to the Patient-centered Results for Uterine Fibroids (COMPARE-UF) registry data to evaluate alternative management options for uterine fibroids for relief of symptoms and quality of life.

stat.ME↗