arXiv Science⌕ Search

arXiv subjects

Siyuan Feng

Publications and source records attributed to Siyuan Feng.

At least 19 recordsLinked to original sources

When Do Typed Decision Models Work in Transportation? Evidence from Travel Choice and Traffic Signal Control

Typed decision models combine natural-language understanding with a structured interface that returns a selected action and an option-level probability distribution without generating lengthy textual responses. Their low inference cost and response latency make them attractive for transportation problems with predefined alternatives. This paper investigates their effectiveness, robustness, and efficiency in two representative transportation tasks: individual travel-mode choice prediction and sequential traffic signal control. We systematically evaluate TypeSafe Jev and GPT-6 Luna Decisions against conventional transportation methods, reinforcement learning algorithms, and four chat-based large language models. Experiments on the Swissmetro dataset show that typed decision models achieve lower prediction accuracy than traditional discrete choice models and the strongest chat-based baseline, while their performance varies substantially with input representation and question framing. In closed-loop traffic signal control experiments, typed decision models demonstrate competitive performance against established controllers in several scenarios, but exhibit performance degradation under more challenging network conditions. Furthermore, the typed models achieve lower inference latency and computational cost than the evaluated chat-based large language models, highlighting their potential for efficient, zero-shot transportation decision-making. Overall, these findings demonstrate both the potential and limitations of typed decision models, emphasizing the importance of input design, task characteristics, and robustness evaluation for their effective application in transportation systems.

cs.CL↗

No Second Run: Does RSI Stop at Frontier Pre-training?

Pre-training is where every foundation model begins; bringing recursive self-improvement (RSI) there would let AI improve the process that creates AI. Yet public RSI work has so far targeted only post-training, which starts from an existing base model, runs trials costing GPU-hours, and returns verifiable scores. Pre-training breaks all three conditions at orders-of-magnitude higher cost: a run consumes hundreds of thousands of GPU-hours over months and cannot be repeated; its objective, post-training headroom, cannot be read off any single score; and what must improve is not a model but the whole production system, from data pipelines and training infrastructure to the teams that run them. To our knowledge, we are the first to apply RSI to an entire frontier pre-training run from scratch and to report it in detail. RSI does not stop at frontier pre-training, but it changes form: since no end-to-end loop can close over a single unrepeatable run, we decompose it into smaller loops that can, each repairing a step the full run breaks. The result is 801-30B-A3B-Base, a 30B-A3B MoE trained from scratch on 11.8T tokens in three months by a newly formed team. We release it as a base model; the lightweight SFT reported here (6B tokens, no RL) only probes post-training headroom. As a base model, 801-30B-A3B outperforms Qwen3-30B-A3B and Nemotron-3.5-Lightning-30B-A3B, trailing only the larger Qwen3.5-35B-A3B, and keeps this position under identical SFT; with lightweight SFT alone, it achieves the highest average on four agentic benchmarks against fully post-trained models, including Qwen3.6-35B-A3B. Since post-training RSI presupposes a strong base model, bringing RSI into pre-training acts on the foundation every later stage builds on. We open-source 801-30B-A3B-Base and the lightweight SFT data at https://github.com/GAIR-NLP/801-30B .

cs.AI↗

HoloRecon: Incremental Reconstruction of Long-Range Panoramas with Global Consistency

Long-sequence panoramic reconstruction requires detailed scene geometry and globally consistent camera poses across distant revisits. Panoramic SLAM and incremental SfM rely on feature correspondences, but repeated, similar structures and small partial overlap make reliable long-range connections difficult to establish, leaving accumulated drift unresolved. Feed-forward models offer detailed local geometry, but their high computational costs limit inference window size, necessitating additional constraints for global consistency. This motivates combining continuous feature-based tracking and sparse mapping with rapid, high-quality local reconstruction from feed-forward models to achieve accurate localization and globally consistent dense mapping over long sequences. We therefore propose a panoramic reconstruction framework that couples an ORB-based sparse panoramic mapping frontend with a fine-tuned feed-forward model. Our key insight is that predicted local geometry enables 3D verification of feature matches across distant revisits, yielding long-range camera constraints even between regions. We calibrate predicted depths with sparse landmarks and use verified connections to optimize the global pose graph, updating dense geometry with the corrected camera poses. We also introduce PanoRecon, a seven-scene benchmark with repetitive architecture, large and small loops, and reference camera poses and LiDAR geometry for evaluating global consistency. Our method achieves the lowest mean absolute trajectory error and high F-1 Score among the evaluated methods. Project Page:https://zhuoxiaoli.github.io/HoloRecon_page/

cs.CV↗

AgiBot World Colosseo: A Large-scale Manipulation Platform for Scalable and Intelligent Embodied Systems

We explore how scalable robot data can address real-world challenges for generalized robotic manipulation. Introducing AgiBot World, a large-scale platform comprising over 1 million trajectories across 217 tasks in five deployment scenarios, we achieve an order-of-magnitude increase in data scale compared to existing datasets. Accelerated by a standardized collection pipeline with human-in-the-loop verification, AgiBot World guarantees high-quality and diverse data distribution. It is extensible from grippers to dexterous hands and visuo-tactile sensors for fine-grained skill acquisition. Building on top of data, we introduce Genie Operator-1 (GO-1), a novel generalist policy that leverages latent action representations to maximize data utilization, demonstrating predictable performance scaling with increased data volume. Policies pre-trained on our dataset achieve an average performance improvement of 30% over those trained on Open X-Embodiment, both in in-domain and out-of-distribution scenarios. GO-1 exhibits exceptional capability in real-world dexterous and long-horizon tasks, achieving over 60% success rate on complex tasks and outperforming prior RDT approach by 32%. By open-sourcing the dataset, tools, and models, we aim to democratize access to large-scale, high-quality robot data, advancing the pursuit of scalable and general-purpose intelligence.

cs.RO↗

Design Anything, Design at Scale

As multimodal resources are transformed into media outputs, agentic AI is expected to stay aligned with design intent over long horizons. Designers follow briefs specifying goals, constraints, and deliverables, with later work building on earlier decisions. Recent work reuses design experience across tasks, yet alignment among artifacts within one project remains challenging. Agents therefore need to preserve and apply this intent across domains and as projects grow. We introduce Design Anything, a graph-based harness that preserves design intent outside the model and binds deliverables to the workflow steps that produce them through an intent-execution graph. A task contract retains constraints and decisions, selected designs become explicit inputs to later generations, and a deterministic controller uses bindings and execution records to check output types and counts, identify outstanding deliverables, and guide subsequent turns. We also introduce DesignAnything-Bench, with 228 tasks across 19 design domains, including 38 project families at scales of 6, 14, and 24 artifacts. With the LLM held fixed, Design Anything satisfies 85.0% and 92.5% of the brief's factual constraints with DeepSeek V4.1 Flash High and GPT-5.6 Sol High, respectively, exceeding the strongest same-model baselines by 15.4% and 14.4%. These gains reach 25.1% and 23.0% on 24-artifact tasks. Under each model, Design Anything leads or ties in constraint satisfaction in 18 of 19 domains. Professional designers also prefer its complete deliverable sets over those of same-model baselines in a blind evaluation.

cs.CV↗

Router Drift Control: Mitigating Off-Policy Degradation in Mixture-of-Experts Reinforcement Learning

Reinforcement learning (RL) can become off-policy due to training-inference mismatch, mini-batch updates, and asynchronous training. The resulting mismatch is especially harmful in Mixture-of-Experts (MoE) models, where rollout-training discrepancies can change routing decisions and lead to router drift. Rollout Routing Replay (R3) mitigates this mismatch by reusing expert selections from the rollout stage during training. Our analysis shows that routing replay introduces gradient bias by losing contributions from experts selected by the training router but not the rollout router. To address this, we propose Router Drift Control (RDC), which uses routing disagreement between rollout and training as a signal of off-policy staleness and selectively rejects high-drift responses. The sequence-level filtering avoids gradient bias introduced by replay while preserving native expert selection and the associated learning signals for retained responses. Experiments show that RDC achieves larger gains as policy staleness increases and remains effective in asynchronous RL. In asynchronous training, RDC combined with Truncated Importance Sampling (TIS) improves the average peak validation accuracy across AIME 2024 and AIME 2025 by 5.5 points over TIS and 4.5 points over R3.

cs.LG↗

Learning While Deploying: Fleet-Scale Reinforcement Learning for Generalist Robot Policies

Generalist robot policies increasingly benefit from large-scale pretraining, but offline data alone is insufficient for robust real-world deployment. Deployed robots encounter distribution shifts, long-tail failures, task variations, and human correction opportunities that fixed demonstration datasets cannot fully capture. We present Learning While Deploying (LWD), a fleet-scale offline-to-online reinforcement learning framework for continual post-training of generalist Vision-Language-Action (VLA) policies. Starting from a pretrained VLA policy, LWD closes the loop between deployment, shared physical experience, policy improvement, and redeployment by using autonomous rollouts and human interventions collected across a robot fleet. To stabilize learning from heterogeneous, sparse-reward fleet data, LWD combines Distributional Implicit Value Learning (DIVL) for robust value estimation with Q-learning via Adjoint Matching (QAM) for policy extraction in flow-based VLA action generators. We validate LWD on a fleet of 16 dual-arm robots across eight real-world manipulation tasks, including semantic grocery restocking and 3--5 minute long-horizon tasks. A single generalist policy improves as fleet experience accumulates, reaching an average success rate of 95%, with the largest gains on long-horizon tasks.

cs.RO↗

$τ_0$-VLA: a Hierarchical Robot Foundation Model with World-Model-Guided Test-Time Computation

Long-horizon robot manipulation requires a robot to both execute individual skills reliably and sequence them coherently over extended tasks. Most hierarchical vision-language-action (VLA) models make each such decision with a single forward pass, leaving no mechanism to allocate additional computation to difficult or consequential choices. We introduce $τ_0$-VLA, a hierarchical robot foundation model that formulates high-level subtask generation as a compute-scalable inference problem through world-model-guided test-time computation. At each inference step, the high-level policy uses execution memory to generate a subtask and, when needed, searches over alternatives before committing to its output. A low-level policy then executes the generated subtask across multiple robot embodiments. The policy is trained on 40,115 hours of heterogeneous real-world data with multimodal co-training. Across in-domain and distribution-shifted settings, allocating additional test-time computation substantially improves next-subtask prediction accuracy, and these gains translate into higher closed-loop success on long-horizon robot manipulation tasks.

cs.RO↗

Cost-Optimal Foundation Model Deployment Portfolio for Transportation Management

Foundation models, including large language models (LLMs) and vision-language models (VLMs), are increasingly used for transportation management center (TMC) tasks such as anomaly detection, incident reporting, and traveler information. Deploying multiple such models across TMC functions raises a portfolio question: which model should serve each function, in which deployment mode, and under what shared hardware budget? We formulate this as the Foundation Model Deployment Portfolio (FMDP) problem, a mixed-integer program minimizing total cost of ownership (TCO) subject to per-function quality, latency, and safety constraints over shared GPU capacity. We prove the problem NP-hard by reduction from the 0-1 knapsack problem and propose a polynomial-time greedy heuristic. In an illustrative case study with five TMC functions and 19 candidate (model, mode) pairs, FMDP identifies a mixed portfolio costing $34/mo (97% below the cheapest feasible all-closed-API baseline) by routing four functions to open-source APIs and the one function whose quality floor no open-source model meets to a closed API. Break-even analysis shows that on-premise GPU investment becomes reasonable only above approximately 309 vision queries/hour or if API prices double.

cs.AI↗

ProWAFT: A ROMA-LPD Instance for Workload-Aware and Dynamic Fault Tolerance in FPGA-Based CNN Accelerators

SRAM-based FPGAs provide an attractive platform for energy- and latency-constrained CNN inference at the network edge, yet transient faults can lead to silent errors that compromise reliability. Always-on redundancy (e.g., full TMR) improves correctness but incurs substantial performance and energy overhead, while reactive recovery may introduce unacceptable latency on the critical path. We propose \textbf{ProWAFT}, a proactive workload-aware fault-tolerance framework for FPGA-based CNN accelerators that uses partial reconfiguration to selectively apply TMR across reconfigurable partitions. ProWAFT quantifies workload criticality, models fault propagation and reconfiguration overhead, and selects configurations that minimize a composite objective over latency, energy, and reliability risk. Implemented on a Xilinx Zynq UltraScale+ ZCU104 platform with six reconfigurable regions and evaluated on a 500-task trace derived from ResNet-18, MobileNetV2, and EfficientNet-Lite under time-varying SEU injection, ProWAFT achieves lower composite cost than static TMR and reactive reconfiguration while maintaining high task success rate and near-baseline throughput with low online decision overhead.

cs.CL↗

One Demo is Worth a Thousand Trajectories: Action-View Augmentation for Visuomotor Policies

Visuomotor policies for manipulation have demonstrated remarkable potential in modeling complex robotic behaviors, yet minor alterations in the robot's initial configuration and unseen obstacles easily lead to out-of-distribution observations. Without extensive data collection effort, these result in catastrophic execution failures. In this work, we introduce an effective data augmentation framework that generates visually realistic fisheye image sequences and corresponding physically feasible action trajectories from real-world eye-in-hand demonstrations, captured with a portable parallel gripper with a single fisheye camera. We introduce a novel Gaussian Splatting formulation, adapted to wide FoV fisheye cameras, to reconstruct and edit the 3D scene with unseen objects. We utilize trajectory optimization to generate smooth, collision-free, view-rendering-friendly action trajectories and render visual observations from corresponding novel views. Comprehensive experiments in simulation and the real world show that our augmentation framework improves the success rate for various manipulation tasks in both the same scene and the augmented scene with obstacles requiring collision avoidance.

cs.RO↗

LLM-ODDR: A Large Language Model Framework for Joint Order Dispatching and Driver Repositioning

Ride-hailing platforms face significant challenges in optimizing order dispatching and driver repositioning operations in dynamic urban environments. Traditional approaches based on combinatorial optimization, rule-based heuristics, and reinforcement learning often overlook driver income fairness, interpretability, and adaptability to real-world dynamics. To address these gaps, we propose LLM-ODDR, a novel framework leveraging Large Language Models (LLMs) for joint Order Dispatching and Driver Repositioning (ODDR) in ride-hailing services. LLM-ODDR framework comprises three key components: (1) Multi-objective-guided Order Value Refinement, which evaluates orders by considering multiple objectives to determine their overall value; (2) Fairness-aware Order Dispatching, which balances platform revenue with driver income fairness; and (3) Spatiotemporal Demand-Aware Driver Repositioning, which optimizes idle vehicle placement based on historical patterns and projected supply. We also develop JointDR-GPT, a fine-tuned model optimized for ODDR tasks with domain knowledge. Extensive experiments on real-world datasets from Manhattan taxi operations demonstrate that our framework significantly outperforms traditional methods in terms of effectiveness, adaptability to anomalous conditions, and decision interpretability. To our knowledge, this is the first exploration of LLMs as decision-making agents in ride-hailing ODDR tasks, establishing foundational insights for integrating advanced language models within intelligent transportation systems. While the current framework incurs higher computational costs than traditional methods, we show that parallel decomposition and model distillation can reduce latency to production-viable levels for deployment.

cs.LG↗

FalconGEMM: Surpassing Hardware Peaks with Lower-Complexity Matrix Multiplication

Peak breaking Matrix Multiplication is a promising technique to improve the performance of DL, especially in LLM training and inference. We present FalconGEMM, a cross-platform framework that automates the deployment, optimization, and selection of Lower-Complexity Matrix Multiplication Algorithms (LCMAs) across diverse hardware. There are three key innovations: (1) a Deployment Module that enables portable execution across various hardware and input configurations through code generation; (2) an Execution Module with Group-Parallel Optimizations that maximizes on-chip data reuse, utilizes parallel resources, and reduces bandwidth overhead; and (3) a Decision Module featuring a lightweight analytical performance model to select the optimal strategy based on matrix shapes and hardware profiles. Extensive evaluation is conducted on LLM workloads across GPU (H20, A100) and CPU (ARM, x86) architectures with multiple data types. FalconGEMM succeeds in delivering peak breaking performance and outperforms GEMM libraries (e.g., cuBLAS, CUTLASS, Intel MKL, etc) by 7.59%-17.85% and LCMA competitors like AlphaTensor by 12.41%-55.61%. Our framework makes the theoretical promise of LCMAs practical for production deployment across the heterogeneous landscape of modern hardware.

cs.DC↗

DistFlow: A Fully Distributed RL Framework for Scalable and Efficient LLM Post-Training

Effectively scaling Reinforcement Learning (RL) is crucial for enhancing the reasoning and alignment of Large Language Models. The massive data and complex execution flows inherent in these tasks require a distributed architecture capable of efficient scaling. However, to simplify programming and dependency management, mainstream frameworks often rely on a centralized architecture where a single node dispatches both control and data. This inherent coupling creates significant communication bottlenecks, severely limiting system scalability and efficiency. We present DISTFLOW, a novel, fully distributed RL framework that adopts a multi-controller paradigm. By decoupling data transmission from control dispatch, DISTFLOW establishes a parallelism-aware, decentralized Data Coordinator that leverages local caching, load balancing, and asynchronous double buffer to minimize communication overhead and mitigate straggler effects. For control logic, it introduces a task scheduler built upon Directed Acyclic Graph (DAG) that facilitates fine-grained, independent execution. Experimental results demonstrate that DISTFLOW achieves near-linear scalability up to 512 GPUs and delivers up to a 2.63x throughput improvement over state-of-the-art (SOTA) frameworks. The source code is available at: https://github.com/sii-research/siiRL.

cs.DC↗

D$^3$-Subsidy: Online and Sequential Driver Subsidy Decision-Making for Large-Scale Ride-Hailing Market

Ride-hailing platforms like DiDi Chuxing operate in highly dynamic environments where balancing driver supply and passenger demand is critical. Although driver-side subsidies serve as a primary lever to align these forces and improve key KPIs like completed rides (\texttt{Rides}) and gross merchandise value (\texttt{GMV}), optimizing them in production requires simultaneously meeting three constraints: (i) responsiveness to stochastic shocks, (ii) strict subsidy-rate caps, and (iii) low-latency execution at city scale. These requirements rule out expensive per-order optimization, calling for a forward-looking, constraint-aware city-level controller for online sequential decision making. To meet these requirements, we introduce D$^3$-Subsidy (Dynamic Driver-side Diffusion-based Subsidy), a hierarchical diffusion-based framework for deployable city-wide subsidy control. To bridge the train-inference gap, D$^3$-Subsidy employs a prefix-conditioned diffusion model that samples plausible future trajectories from immutable historical observations, ensuring the training protocol aligns with the fixed-history nature of online deployment. These generated plans are then decoded by a context-conditioned inverse module into low-dimensional city-level control signals. For scalable execution, we bridge the gap between city-level planning and fine-grained dispatch via a Lagrangian-dual-derived mapping, which embeds subsidy-rate caps directly into order-driver incentives without iterative optimization. Additionally, a multi-city pretraining strategy with parameter-efficient fine-tuning enables robust transfer across heterogeneous cities. Extensive offline evaluations demonstrate that D$^3$-Subsidy improves \texttt{Rides} and \texttt{GMV} while enhancing cap compliance, and a real-world A/B test confirms significant uplift while keeping budget-related violation metrics within operational thresholds.

cs.LG↗

PlexRL: Cluster-Level Orchestration of Serviceized LLM Execution for RLVR

Reinforcement learning with verifiable rewards (RLVR) has recently unlocked strong reasoning capabilities in large language models (LLMs), triggering rapid exploration of new algorithms and data. However, RLVR training is notoriously inefficient: long-tailed rollouts, tool-induced stalls, and asymmetric resource requirements between rollout and training introduce substantial idle time that cannot be eliminated by job-local optimizations such as synchronous pipelining, asynchronous rollout, or colocated execution. We argue that this inefficiency is structural. While idle gaps are unavoidable within individual RLVR jobs, they are largely anti-correlated across jobs and therefore exploitable at the cluster level. Leveraging this observation, we present PlexRL, a cluster-level runtime for multiplexing unified LLM services across RLVR jobs. By centrally managing model placement, state transitions, and function-level scheduling under strict affinity constraints, PlexRL time-slices LLM execution across jobs to fill otherwise idle periods without expensive model migration. Our implementation and evaluations demonstrate that PlexRL significantly improves effective cluster capacity and reduces user GPU hour cost by maximum 37.58% while preserving algorithmic flexibility and introducing minimal per-job overhead.

cs.DC↗

Geometry-aware 4D Video Generation for Robot Manipulation

Understanding and predicting dynamics of the physical world can enhance a robot's ability to plan and interact effectively in complex environments. While recent video generation models have shown strong potential in modeling dynamic scenes, generating videos that are both temporally coherent and geometrically consistent across camera views remains a significant challenge. To address this, we propose a 4D video generation model that enforces multi-view 3D consistency of generated videos by supervising the model with cross-view pointmap alignment during training. Through this geometric supervision, the model learns a shared 3D scene representation, enabling it to generate spatio-temporally aligned future video sequences from novel viewpoints given a single RGB-D image per view, and without relying on camera poses as input. Compared to existing baselines, our method produces more visually stable and spatially aligned predictions across multiple simulated and real-world robotic datasets. We further show that the predicted 4D videos can be used to recover robot end-effector trajectories using an off-the-shelf 6DoF pose tracker, yielding robot manipulation policies that generalize well to novel camera viewpoints.

cs.CV↗

NeuroRisk: Physics-Informed Neural Optimization for Risk-Aware Traffic Engineering

In production Wide-Area Networks (WANs), correlated failures dominate availability losses, forcing operators to reserve large safety margins that leave substantial capacity underutilized. Achieving high utilization under strict availability targets therefore requires risk-aware Traffic Engineering (TE) over dozens to hundreds of probabilistic failure scenarios-yet solving this problem at operational timescales remains elusive. We demonstrate that existing risk-aware formulations can be unified under an embedded Sort-and-Select structure, exposing a fundamental trade-off between expressiveness and tractability: classical optimizers either restrict scenario selection for efficiency or incur prohibitive decomposition costs. While deep learning appears promising, prior Deep TE methods mainly target maximum link utilization and rely on scaling-based feasibility, which fundamentally breaks under explicit capacity constraints and scenario-dependent risk. We present NeuroRisk, a physics-informed deep unrolled optimizer that exploits the structure of Sort-and-Select. NeuroRisk enforces feasibility via gated edge-local reservations and represents scenario sets through permutation-invariant, gradient-aligned cues. Evaluations on production-style WANs show that NeuroRisk achieves small optimality gaps relative to the solver with orders of magnitude speedup $(10^2- 10^5 \times)$ on risk objectives, while outperforming neural baselines on nominal throughput.

cs.NI↗