arXiv subjects

Simone Servadio

Publications and source records attributed to Simone Servadio.

At least 19 recordsLinked to original sources

arXiv2026

Estimating Harmonic Coefficients of Asteroids through LiAISON Navigation

This paper evaluates the Linked Autonomous Interplanetary Satellite Orbit Navigation (LiAISON) method in near two-body asteroid systems. While LiAISON's usefulness has been proven in multibody environments such as the cislunar region, the application of a two-body system with gravity perturbations has not been sufficiently demonstrated. Vesta and Ceres are good candidates to test LiAISON, because the asteroids have sufficiently strong perturbations to use LiAISON method. The study utilizes a Multi-Model Adaptive Estimation (MMAE) framework integrated with Unscented Kalman Filters (UKF) to estimate the spacecraft states and perturbations using only range and range rate measurements. Results from the Monte Carlo analysis indicate that the proposed framework makes accurate and consistent estimates of position, velocity, and the perturbations for cases of Ceres and Vesta.

astro-ph.EP↗

arXiv2026

Fully Multiplicative Attitude and Orbit Determination for Deep space Navigation

This paper develops a geometry-consistent fully multiplicative unscented Kalman filter (FM-UKF) for joint spacecraft attitude--orbit estimation with simultaneous dual star-tracker misalignment calibration. The estimator uses a 21-dimensional local error state combining attitude, angular velocity, gyroscope bias, inertial position and velocity, and two tracker-misalignment vectors on a mixed quaternion--Euclidean manifold. Gyroscope, star-tracker, and planet line-of-sight measurements are fused, with celestial aberration retained to capture velocity-dependent optical coupling. A multiplicative extended Kalman filter (MEKF) is implemented as a first-order baseline using the same nominal state, attitude retraction, and unit-vector measurement geometry. Monte Carlo results show similar short-step performance, while at coarse propagation intervals the proposed FM-UKF remains consistent and the MEKF exhibits divergence.

eess.SY↗

arXiv2026

Beyond the Cube: Overlapping Grid Methods for Debris Collision Risk Assessment

The cube method reduces conjunction screening in orbital debris simulations to $\mathcal{O}(N)$ cost by evaluating only object pairs sharing the same grid cell at each snapshot, but systematically assigns zero collision probability to pairs separated by a cell boundary at that epoch, a failure known as boundary blindness. This paper introduces the Double Cube (DC) method, which recovers boundary-crossing conjunctions through a spatially shifted secondary grid using bin-index lookup alone, preserving $\mathcal{O}(N)$ complexity. Validated across 8,000 Monte Carlo seeds, DC reduces the blindness rate from $\beta_{\mathrm{Cube}} = 9.70\%$ to $\beta_{\mathrm{DC}} = 4.21\%$; a synchronized experiment confirms the residual is temporal in origin by reaching exactly $0.00\%$. Removing blindness reveals a systematic per-pair overestimation in the cube formula that blind zero-probability assignments had been masking, suppressing the overall predicted collision rate below the true rate. Two independent corrections are derived and validated: a power-law correction motivated by the Direct Simulation Monte Carlo kinetic theory analogy reduces the calibration error from $12.9\%$ to $1.9\%$ at $k = 1$ and $4.0\%$ at $k = 2$, bracketing perfect calibration from opposite sides; a parameter-free Gaussian correction derived from the pair-distance distribution geometry achieves a residual of $0.08\%$. Both corrections have been implemented in MOCAT-MC.

astro-ph.EP↗

arXiv2026

Deep Learning-Based Lunar Crater Terrain Relative Navigation

Accurate position estimation is crucial for the successful implementation of future lunar landings using autonomous vehicles, especially in dangerous environments with sparse terrain features. In this paper, we propose a terrain relative navigation (TRN) algorithm combining our deep-learning crater detector, which was designed specifically for the NASA Crater Detection Challenge problem, and an Extended Kalman Filter (EKF). Our detector analyzes crater features from the monocular images acquired from orbit, and their matches with craters from a global database are identified via a Hungarian assignment approach followed by the consensus-based outliers removal method. The estimated measurements are then used to refine an EKF, where spacecraft pose estimation in the Lunar-Centered Lunar-Fixed (LCLF) frame of reference, augmented with altitude aiding information, constrains radial drift. The simulation results indicate that even if the spacecraft is off from its actual location up to 5 km, TRN could recover from this situation, achieving navigation error reduction to a few hundred meters. It should be noted that in order to maintain crater feature correspondences, it is important to match the image resolution and the scales within the scene to the detector training set distribution.

cs.RO↗

arXiv2026

Population-Aware Physics-Informed Neural Particle Flow for Robust Spacecraft Bayesian Navigation

Spacecraft navigation often requires Bayesian inference from sparse nonlinear measurements that produce curved, multimodal, or geometrically constrained posterior distributions. Physics-informed neural particle flow (PINPF) addresses such problems by learning a deterministic prior-to-posterior transport field from the governing probability evolution equation, but its particle-wise architecture does not explicitly account for the empirical particle population. This paper introduces population-aware PINPF (PA-PINPF), which conditions each particle velocity on a permutation-invariant Deep Sets representation of the complete particle set. PA-PINPF-State summarizes particle positions, whereas PA-PINPF-Feature summarizes the local physics-informed features, including likelihood and score information. Both retain the unsupervised PINPF residual and require neither posterior samples nor labeled transport trajectories. The methods are evaluated over 100 randomized time-difference-of-arrival tasks representative of RF cross-link and ground-station localization and 100 range-measurement tasks with an onboard sensor field-of-view constraint. Results demonstrate that population-level Bayesian features provide useful global information for learned particle transport in nonlinear spacecraft-navigation problems.

cs.LG↗

arXiv2026

Resilient Navigation for Autonomous Farm Robots by Leveraging Jerk-Augmented Models with IMU-Only Disturbance Rejection

Precise state estimation for navigation of autonomous agricultural robots is often compromised by sensor outages (GNSS/LiDAR/Visual) and high-frequency vibrations inherent in off-road environments. This paper proposes a robust navigation algorithm based on a jerk-augmented Extended Kalman Filter (EKF) integrated with a Multiple Tuning Factor (MTF) adaptation method. Unlike standard EKF approaches that assume constant measurement noise, our method dynamically adjusts the measurement covariance matrix in real-time, allowing the system to cope with sudden disturbances and sensor outliers. We evaluate the algorithm using real-world data from a Salin247 autonomous robot. Results demonstrate that jerk-augmentation combined with MTF adaptation significantly reduces 3D position Root Mean Square Error (RMSE) compared to baseline EKF models, providing superior dead-reckoning capabilities.

cs.RO↗

arXiv2026

Tightly-Coupled Estimation and Guidance for Robust Low-Thrust Rendezvous via Adaptive Homotopy

Minimum-fuel low-thrust rendezvous guidance yields bang-bang control structures highly sensitive to estimation errors, sensor anomalies, and solver regularization, making aggressive closed-loop execution brittle for uncooperative proximity operations. This paper proposes a tightly-coupled estimation and guidance architecture where navigation confidence directly modulates the homotopy parameter of a receding-horizon indirect optimal control solver. Relative motion is modeled in the Clohessy-Wiltshire frame. The translational state is estimated via a linear Kalman filter augmented by a Multiple Tuning Factors (MTF) covariance inflation mechanism that suppresses suspicious innovation directions. A composite score from the normalized innovation and MTF activity is mapped online to the homotopy parameter, allowing the controller to relax toward a smoother, conservative regime when confidence degrades, and recover fuel-efficient bang-bang control as sensing improves. Numerical results under severe measurement degradation show fixed bang-bang guidance remains brittle; both plain-KF and MTF-KF fixed-epsilon controllers yield large terminal miss distances. Conversely, the proposed MTF-adaptive homotopy controller reduces terminal miss by roughly two orders of magnitude, from hundreds of meters to sub-meter levels, requiring only a moderate increase in control effort versus the open-loop fuel-optimal benchmark. A comparison indicates adaptive homotopy is the dominant robustness mechanism, while MTF provides additional accuracy and efficiency improvements. The receding-horizon implementation exhibits consistently fast and reliable solution times, supporting the practical online viability of the proposed method.

cs.RO↗

arXiv2026

Online Inertia Tensor Identification for Non-Cooperative Spacecraft via Augmented UKF

Autonomous proximity operations, such as active debris removal and on-orbit servicing, require high-fidelity relative navigation solutions that remain robust in the presence of parametric uncertainty. Standard estimation frameworks typically assume that the target spacecraft's mass properties are known a priori; however, for non-cooperative or tumbling targets, these parameters are often unknown or uncertain, leading to rapid divergence in model-based propagators. This paper presents an augmented Unscented Kalman Filter (UKF) framework designed to jointly estimate the relative 6-DOF pose and the full inertia tensor of a non-cooperative target spacecraft. The proposed architecture fuses visual measurements from monocular vision-based Convolutional Neural Networks (CNN) with depth information from LiDAR to constrain the coupled rigid-body dynamics. By augmenting the state vector to include the six independent elements of the inertia tensor, the filter dynamically recovers the target's normalized mass distribution in real-time without requiring ground-based pre-calibration. To ensure numerical stability and physical consistency during the estimation of constant parameters, the filter employs an adaptive process noise formulation that prevents covariance collapse while allowing for the gradual convergence of the inertial parameters. Numerical validation is performed via Monte Carlo simulations, demonstrating that the proposed Augmented UKF enables the simultaneous convergence of kinematic states and inertial parameters, thereby facilitating accurate long-term trajectory prediction and robust guidance in non-cooperative deep-space environments.

cs.RO↗

arXiv2026

Polynomial Updates for the Unscented Kalman Filter

Most nonlinear filters used in spacecraft navigation are based on a linear approximation of the optimal minimum mean square error estimator. The Unscented Kalman Filter (UKF) handles nonlinear dynamics through a sigma-point transform, but the resulting state estimate remains a linear function of the measurement. This paper proposes a polynomial approximation of the optimal Bayesian update, leading to a Polynomial Unscented Kalman Filter that retains the structure of the standard UKF but enriches the measurement update with higher-order (polynomial) terms. To compute the moments required by this polynomial estimator, we employ a Conjugate Unscented Transformation (CUT), which accurately captures higher-order central moments of the state and measurement. Numerical examples, including Clohessy-Wiltshire and Circular Restricted 3-Body dynamics with non-Gaussian measurement noise, illustrate that the resulting polynomial-CUT filters improve both state estimation accuracy and covariance consistency when compared with their linear counterparts.

eess.SY↗

arXiv2026

Multidisciplinary Design Optimization of a Low-Thrust Asteroid Orbit Insertion Using Electric Propulsion

Low-thrust electric propulsion missions are often designed under simplifying assumptions such as constant thrust or fixed specific impulse, neglecting the strong coupling between trajectory dynamics, spacecraft power availability, and propulsion performance. In deep-space environments with reduced solar irradiance, these assumptions can lead to suboptimal or infeasible designs, underscoring the need to simultaneously optimize the trajectory and power subsystem. This paper presents a multidisciplinary design optimization (MDO) framework for the simultaneous design of low-thrust trajectories and spacecraft power systems, with explicit coupling to electric propulsion performance. The framework incorporates a high-fidelity variable-specific impulse model of the SPT-140 Hall thruster, in which thrust and efficiency are directly constrained by time-varying solar power availability and solar array degradation, rather than treated as fixed parameters. The coupled problem is posed as a time-optimal control problem and addressed using a framework built on top of OpenMDAO and Dymos toolchains, where Dymos employs a collocation-based direct-transcription approach for trajectory optimization. OpenMDAO provides accurate analytic partial derivatives, enabling efficient gradient-based optimization. A Fast Fourier Series shape-based method is used to generate dynamically feasible initial guess trajectories, and the resulting nonlinear programming problem is solved using IPOPT. The proposed framework is demonstrated through a low-thrust orbit insertion scenario around asteroid 16-Psyche, a regime in which reduced solar irradiance makes power-aware trajectory design particularly critical. Simulation results demonstrate the framework's ability to capture key power-propulsion-trajectory trade-offs, highlighting the importance of integrated power optimization for realistic electric propulsion mission design.

eess.SY↗

arXiv2026

Compensating Star-Trackers Misalignments with Adaptive Multi-Model Estimation

This paper presents an adaptive multi-model framework for jointly estimating spacecraft attitude and star-tracker misalignments in GPS-denied deep-space CubeSat missions. A Multiplicative Extended Kalman Filter (MEKF) estimates attitude, angular velocity, and gyro bias, while a Bayesian Multiple-Model Adaptive Estimation (MMAE) layer operates on a discrete grid of body-to-sensor misalignment hypotheses. In the single-misalignment case, the MEKF processes gyroscope measurements and TRIAD-based attitude observations, and the MMAE updates a three-dimensional grid over the misalignment vector. For a dual-misalignment configuration, the same MEKF dynamics are retained, and the MMAE bank is driven directly by stacked line-of-sight measurements from two star trackers, forming a six-dimensional grid over the two misalignment quaternions without augmenting the continuous-state dimension. A novel diversity metric, $\Psi$, is introduced to trigger adaptive refinement of the misalignment grid around a weighted-mean estimate, thereby preventing premature collapse of the model probabilities and concentrating computation in the most likely region of the parameter space. Monte Carlo simulations show arcsecond-level misalignment estimation and sub-degree attitude errors for both estimation problems, with estimation errors remaining well-bounded, proving robustness and consistency. These results indicate that the proposed MEKF--MMAE architecture enables accurate, autonomous, and computationally efficient in-flight calibration for resource-constrained spacecraft, and establishes dual star-tracker misalignment estimation as a practical option for deep-space CubeSat missions.

eess.SY↗

arXiv2025

Star Tracker Misalignment Compensation in Deep Space Navigation Through Model-Based Estimation

This work presents a novel adaptive framework for simultaneously estimating spacecraft attitude and sensor misalignment. Uncorrected star tracker misalignment can introduce significant pointing errors that compromise mission objectives in GPS-denied environments. To address this challenge, the proposed architecture integrates a Bayesian Multiple-Model Adaptive Estimation (MMAE) framework operating over an N x N x N 3D hypothesis grid. Each hypothesis employs a 9-state Multiplicative Extended Kalman Filter (MEKF) to estimate attitude, angular velocity, and gyroscope bias using TRIAD-based vector measurements. A key contribution is the development of a robust grid refinement strategy that uses hypothesis diversity and weighted-mean grid centering to prevent the premature convergence commonly encountered in classical, dominant model-based refinement triggers. Extensive Monte Carlo simulations demonstrate that the proposed method reduces the final misalignment RMSE relative to classical approaches, achieving arcsecond-level accuracy. The resulting framework offers a computationally tractable and statistically robust solution for in-flight calibration, enhancing the navigational autonomy of resource-constrained spacecraft.

eess.SY↗

arXiv2025

Periodic orbit tracking in cislunar space: A finite-horizon approach

This paper presents a Nonlinear Model Predictive Control (NMPC) scheme for maintaining a spacecraft within a specified family of periodic orbits near the libration points in cislunar space. Unlike traditional approaches that track a predefined reference orbit, the proposed method designs an optimal trajectory that keeps the spacecraft within the orbit family, regardless of the initial reference. The Circular Restricted Three-Body Problem (CR3BP) is used to model the system dynamics. First, the Pseudo-Arclength Continuation (PAC) method is employed to compute the members of each orbit family. Then, the state of each member is parameterized by two variables: one defining the orbit and the other specifying the location along it. These computed states are then fit to a Multivariate Polynomial Regression (MPR) model. An NMPC framework is developed to generate the optimal reference trajectory and compute the corresponding velocity impulses for trajectory tracking. The control system is integrated with a Extended Kalman Filter (EKF) observer that estimates the spacecraft's relative state. Numerical simulations are conducted for Lyapunov, halo, and near-rectilinear halo orbits near L1 and L2. The results demonstrate a significant reduction in fuel consumption compared to conventional tracking methods.

eess.SY↗

arXiv2025

A Data-Driven Approach to Estimate LEO Orbit Capacity Models

Utilizing the Sparse Identification of Nonlinear Dynamics algorithm (SINDy) and Long Short-Term Memory Recurrent Neural Networks (LSTM), the population of resident space objects, divided into Active, Derelict, and Debris, in LEO can be accurately modeled to predict future satellite and debris propagation. This proposed approach makes use of a data set coming from a computational expensive high-fidelity model, the MOCAT-MC, to provide a light, low-fidelity counterpart that provides accurate forecasting in a shorter time frame.

cs.LG↗

arXiv2025

Adaptive Relative Pose Estimation Framework with Dual Noise Tuning for Safe Approaching Maneuvers

Accurate and robust relative pose estimation is crucial for enabling challenging Active Debris Removal (ADR) missions targeting tumbling derelict satellites such as ESA's ENVISAT. This work presents a complete pipeline integrating advanced computer vision techniques with adaptive nonlinear filtering to address this challenge. A Convolutional Neural Network (CNN), enhanced with image preprocessing, detects structural markers (corners) from chaser imagery, whose 2D coordinates are converted to 3D measurements using camera modeling. These measurements are fused within an Unscented Kalman Filter (UKF) framework, selected for its ability to handle nonlinear relative dynamics, to estimate the full relative pose. Key contributions include the integrated system architecture and a dual adaptive strategy within the UKF: dynamic tuning of the measurement noise covariance compensates for varying CNN measurement uncertainty, while adaptive tuning of the process noise covariance, utilizing measurement residual analysis, accounts for unmodeled dynamics or maneuvers online. This dual adaptation enhances robustness against both measurement imperfections and dynamic model uncertainties. The performance of the proposed adaptive integrated system is evaluated through high-fidelity simulations using a realistic ENVISAT model, comparing estimates against ground truth under various conditions, including measurement outages. This comprehensive approach offers an enhanced solution for robust onboard relative navigation, significantly advancing the capabilities required for safe proximity operations during ADR missions.

cs.RO↗

arXiv2025

The Sustainability of the Leo Orbit Capacity via Risk-Driven Active Debris Removal

The growing number of space debris in Low Earth Orbit (LEO) jeopardizes long-term orbital sustainability, requiring efficient risk assessment for active debris removal (ADR) missions. This study presents the development and validation of Filtered Modified MITRI (FMM), an enhanced risk index designed to improve the prioritization of high-criticality debris. Leveraging the MOCAT-MC simulation framework, we conducted a comprehensive performance evaluation and sensitivity analysis to probe the robustness of the FMM formulation. The results demonstrate that while the FMM provides superior identification of high-risk targets for annual removal campaigns, a nuanced performance trade-off exists between risk models depending on the operational removal cadence. The analysis also confirms that physically grounded mass terms are indispensable for practical risk assessment. By providing a validated open source tool and critical insights into the dynamics of risk, this research enhances our ability to select optimal ADR targets and ensure the long-term viability of LEO operations.

eess.SY↗

arXiv2025

Quadratic Extended and Unscented Kalman Filter Updates

Common filters are usually based on the linear approximation of the optimal minimum mean square error estimator. The Extended and Unscented Kalman Filters handle nonlinearity through linearization and unscented transformation, respectively, but remain linear estimators, meaning that the state estimate is a linear function of the measurement. This paper proposes a quadratic approximation of the optimal estimator, creating the Quadratic Extended and Quadratic Unscented Kalman Filter. These retain the structure of their linear counterpart, but include information from the measurement square to obtain a more accurate estimate. Numerical results show the benefits in accuracy of the new technique, which can be generalized to upgrade other linear estimators to their quadratic versions.

cs.IT↗

arXiv2025

Advances in Particle Flow Filters with Taylor Expansion Series

Particle Flow Filters perform the measurement update by moving particles to a different location rather than modifying the particles' weight based on the likelihood. Their movement (flow) is dictated by a drift term, which continuously pushes the particle toward the posterior distribution, and a diffusion term, which guarantees the spread of particles. This work presents a novel derivation of these terms based on high-order polynomial expansions, where the common techniques based on linearization reduce to a simpler version of the new methodology. Thanks to differential algebra, the high-order particle flow is derived directly onto the polynomials representation of the distribution, embedded with differentiation and evaluation. The resulting technique proposes two new particle flow filters, whose difference relies on the selection of the expansion center for the Taylor polynomial evaluation. Numerical applications show the improvement gained by the inclusion of high-order terms, especially when comparing performance with the Gromov flow and the "exact" flow.

cs.CE↗