arXiv subjects

Simone Marconi

Publications and source records attributed to Simone Marconi.

6 recordsLinked to original sources

arXiv2026

Enhanced Terahertz Photoresponse via Acoustic Plasmon Cavity Resonances in Scalable Graphene

Precise control and nanoscale confinement of terahertz (THz) fields are essential requirements for emerging applications in photonics, quantum technologies, wireless communications, and sensing. Here, we demonstrate a polaritonic cavity enhanced THz photoresponse in an antenna coupled device based on chemical vapor deposited (CVD) monolayer graphene. The dipole antenna lobes simultaneously serve as two gate electrodes, concentrate the impinging THz field, and efficiently launch acoustic graphene plasmons (AGPs), which drive a strong photo-thermoelectric (PTE) signal. Between 6 and 90 K, the photovoltage exhibits pronounced peaks, modulating the PTE response by up to 40\%, that we attribute to AGPs forming a Fabry P\'erot THz cavity in the full or half graphene channel. Combined full wave and transport thermal simulations accurately reproduce the gate controlled plasmon wavelength, spatial absorption profile, and the resulting nonuniform electron heating responsible for the PTE response. The lateral and vertical maximum confinement factors of the AGP wavelength relative to the incident wavelength are 165 and 4000, respectively, for frequencies from 1.83 to 2.52 THz. These results demonstrate that wafer scalable CVD graphene, without hBN encapsulation, can host coherent AGP resonances and exhibit an efficient polaritonic enhanced photoresponse under appropriate gating, antenna coupling, and AGP cavity design, opening a route to scalable, polarization and frequency selective, liquid nitrogen cooled, and low power consumption THz detection platforms based on plasmon thermoelectric transduction.

cond-mat.mes-hall↗

arXiv2024

High-Speed Graphene-based Sub-Terahertz Receivers enabling Wireless Communications for 6G and Beyond

In recent years, the telecommunications field has experienced an unparalleled proliferation of wireless data traffic. Innovative solutions are imperative to circumvent the inherent limitations of the current technology, in particular in terms of capacity. Carrier frequencies in the sub-terahertz (sub-THz) range (~0.2-0.3 THz) can deliver increased capacity and low attenuation for short-range wireless applications. Here, we demonstrate a direct, passive and compact sub-THz receiver based on graphene, which outperforms state-of-the-art sub-THz receivers. These graphene-based receivers offer a cost-effective, CMOS-compatible, small-footprint solution that can fulfill the size, weight, and power consumption (SWaP) requirements of 6G technologies. We exploit a sub-THz cavity, comprising an antenna and a back mirror, placed in the vicinity of the graphene channel to overcome the low inherent absorption in graphene and the mismatch between the areas of the photoactive region and the incident radiation, which becomes extreme in the sub-THz range. The graphene receivers achieve a multigigabit per second data rate with a maximum distance of ~3 m from the transmitter, a setup-limited 3 dB bandwidth of 40 GHz, and a high responsivity of 0.16 A/W, enabling applications such as chip-to-chip communication and close proximity device-to-device communication.

physics.optics↗

arXiv2022

High quality nanocavities through multimodal confinement of hyperbolic polaritons in hexagonal boron nitride

A conventional optical cavity supports modes which are confined because they are unable to leak out of the cavity. Bound state in continuum (BIC) cavities are an unconventional alternative, where light can leak out, but is confined by multimodal destructive interference. BICs are a general wave phenomenon, of particular interest to optics, but BICs and multimodal interference have never been demonstrated at the nanoscale. Here, we demonstrate the first nanophotonic cavities based on BIC-like multimodal interference. This novel confinement mechanism for deep sub-wavelength light shows orders of magnitude improvement in several confinement metrics. Specifically, we obtain cavity volumes below 100x100x3nm^3 with quality factors about 100, with extreme cases having 23x23x3nm^3 volumes or quality factors above 400. Key to our approach, is the use of pristine crystalline hyperbolic dispersion media (HyM) which can support large momentum excitations with relatively low losses. Making a HyM cavity is complicated by the additional modes that appear in a HyM. Ordinarily, these serve as additional channels for leakage, reducing cavity performance. But, in our experiments, we find a BIC-like cavity confinement enhancement effect, which is intimately related to the ray-like nature of HyM excitations. In fact, the quality factors of our cavities exceed the maximum that is possible in the absence of higher order modes. The alliance of HyM with BICs in our work yields a radically novel way to confine light and is expected to have far reaching consequences wherever strong optical confinement is utilized, from ultra-strong light-matter interactions, to mid-IR nonlinear optics and a range of sensing applications.

physics.optics↗

arXiv2020

Wafer-scale integration of graphene-based photonic devices

Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour deposition (CVD) of single layer graphene (SLG) matrices comprising up to ~12000 individual single crystals (SCs), grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ~80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ~5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ~0.25, 0.45, 0.75, 1 dB V-1 for device lengths ~30, 60, 90, 120 {\mu}m. The data rate is up to 20 Gbps. Encapsulation with single-layer hBN is used to protected SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. Our full process flow (from growth to device fabrication) enables the commercial implementation of graphene-based photonic devices.

physics.app-ph↗

arXiv2020

Ultrafast, Zero-Bias, Graphene Photodetectors with Polymeric Gate Dielectric on Passive Photonic Waveguides

We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 ${\mu}$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices.

physics.app-ph↗

arXiv2020

High-speed double layer graphene electro-absorption modulator on SOI waveguide

We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-quality scalable graphene and low contact resistance. By demonstrating this high-speed CVD graphene EAM modulator integrated on Si photonics and the scalable approach, we are confident that graphene can satisfy the main requirements to be a competitive technology for photonics.

physics.app-ph↗