arXiv subjects

Simon Doclo

Publications and source records attributed to Simon Doclo.

At least 37 records · Page 2Linked to original sources

arXiv2025

Binaural Localization Model for Speech in Noise

Binaural acoustic source localization is important to human listeners for spatial awareness, communication and safety. In this paper, an end-to-end binaural localization model for speech in noise is presented. A lightweight convolutional recurrent network that localizes sound in the frontal azimuthal plane for noisy reverberant binaural signals is introduced. The model incorporates additive internal ear noise to represent the frequency-dependent hearing threshold of a typical listener. The localization performance of the model is compared with the steered response power algorithm, and the use of the model as a measure of interaural cue preservation for binaural speech enhancement methods is studied. A listening test was performed to compare the performance of the model with human localization of speech in noisy conditions.

eess.AS↗

arXiv2025

Binaural Speech Enhancement Using Complex Convolutional Recurrent Networks

From hearing aids to augmented and virtual reality devices, binaural speech enhancement algorithms have been established as state-of-the-art techniques to improve speech intelligibility and listening comfort. In this paper, we present an end-to-end binaural speech enhancement method using a complex recurrent convolutional network with an encoder-decoder architecture and a complex LSTM recurrent block placed between the encoder and decoder. A loss function that focuses on the preservation of spatial information in addition to speech intelligibility improvement and noise reduction is introduced. The network estimates individual complex ratio masks for the left and right-ear channels of a binaural hearing device in the time-frequency domain. We show that, compared to other baseline algorithms, the proposed method significantly improves the estimated speech intelligibility and reduces the noise while preserving the spatial information of the binaural signals in acoustic situations with a single target speaker and isotropic noise of various types.

eess.AS↗

arXiv2025

Incremental Averaging Method to Improve Graph-Based Time-Difference-of-Arrival Estimation

Estimating the position of a speech source based on time-differences-of-arrival (TDOAs) is often adversely affected by background noise and reverberation. A popular method to estimate the TDOA between a microphone pair involves maximizing a generalized cross-correlation with phase transform (GCC-PHAT) function. Since the TDOAs across different microphone pairs satisfy consistency relations, generally only a small subset of microphone pairs are used for source position estimation. Although the set of microphone pairs is often determined based on a reference microphone, recently a more robust method has been proposed to determine the set of microphone pairs by computing the minimum spanning tree (MST) of a signal graph of GCC-PHAT function reliabilities. To reduce the influence of noise and reverberation on the TDOA estimation accuracy, in this paper we propose to compute the GCC-PHAT functions of the MST based on an average of multiple cross-power spectral densities (CPSDs) using an incremental method. In each step of the method, we increase the number of CPSDs over which we average by considering CPSDs computed indirectly via other microphones from previous steps. Using signals recorded in a noisy and reverberant laboratory with an array of spatially distributed microphones, the performance of the proposed method is evaluated in terms of TDOA estimation error and 2D source position estimation error. Experimental results for different source and microphone configurations and three reverberation conditions show that the proposed method considering multiple CPSDs improves the TDOA estimation and source position estimation accuracy compared to the reference microphone- and MST-based methods that rely on a single CPSD as well as steered-response power-based source position estimation.

eess.AS↗

arXiv2025

Comparison of Knowledge Distillation Methods for Low-complexity Multi-microphone Speech Enhancement using the FT-JNF Architecture

Multi-microphone speech enhancement using deep neural networks (DNNs) has significantly progressed in recent years. However, many proposed DNN-based speech enhancement algorithms cannot be implemented on devices with limited hardware resources. Only lowering the complexity of such systems by reducing the number of parameters often results in worse performance. Knowledge Distillation (KD) is a promising approach for reducing DNN model size while preserving performance. In this paper, we consider the recently proposed Frequency-Time Joint Non-linear Filter (FT-JNF) architecture and investigate several KD methods to train smaller (student) models from a large pre-trained (teacher) model. Five KD methods are evaluated using direct output matching, the self-similarity of intermediate layers, and fused multi-layer losses. Experimental results on a simulated dataset using a compact array with five microphones show that three KD methods substantially improve the performance of student models compared to training without KD. A student model with only 25% of the teacher model's parameters achieves comparable PESQ scores at 0 dB SNR. Furthermore, a reduction of up to 96% in model size can be achieved with only a minimal decrease in PESQ scores.

eess.AS↗

arXiv2025

Soft-Constrained Spatially Selective Active Noise Control for Open-fitting Hearables

Recent advances in spatially selective active noise control (SSANC) using multiple microphones have enabled hearables to suppress undesired noise while preserving desired speech from a specific direction. Aiming to achieve minimal speech distortion, a hard constraint has been used in previous work in the optimization problem to compute the control filter. In this work, we propose a soft-constrained SSANC system that uses a frequency-independent parameter to trade off between speech distortion and noise reduction. We derive both time- and frequency-domain formulations, and show that conventional active noise control and hard-constrained SSANC represent two limiting cases of the proposed design. We evaluate the system through simulations using a pair of open-fitting hearables in an anechoic environment with one speech source and two noise sources. The simulation results validate the theoretical derivations and demonstrate that for a broad range of the trade-off parameter, the signal-to-noise ratio and the speech quality and intelligibility in terms of PESQ and ESTOI can be substantially improved compared to the hard-constrained design.

eess.AS↗

arXiv2025

Improved Topology-Independent Distributed Adaptive Node-Specific Signal Estimation for Wireless Acoustic Sensor Networks

This paper addresses the challenge of topology-independent (TI) distributed adaptive node-specific signal estimation (DANSE) in wireless acoustic sensor networks (WASNs) where sensor nodes exchange only fused versions of their local signals. An algorithm named TI-DANSE has previously been presented to handle non-fully connected WASNs. However, its slow iterative convergence towards the optimal solution limits its applicability. To address this, we propose in this paper the TI-DANSE+ algorithm. At each iteration in TI-DANSE+, the node set to update its local parameters is allowed to exploit each individual partial in-network sums transmitted by its neighbors in its local estimation problem, increasing the available degrees of freedom and accelerating convergence with respect to TI-DANSE. Additionally, a tree-pruning strategy is proposed to further increase convergence speed. TI-DANSE+ converges as fast as the DANSE algorithm in fully connected WASNs while reducing transmit power usage. The convergence properties of TI-DANSE+ are demonstrated in numerical simulations.

eess.AS↗

arXiv2025

Spatially Selective Active Noise Control for Open-fitting Hearables with Acausal Optimization

Recent advances in active noise control have enabled the development of hearables with spatial selectivity, which actively suppress undesired noise while preserving desired sound from specific directions. In this work, we propose an improved approach to spatially selective active noise control that incorporates acausal relative impulse responses into the optimization process, resulting in significantly improved performance over the causal design. We evaluate the system through simulations using a pair of open-fitting hearables with spatially localized speech and noise sources in an anechoic environment. Performance is evaluated in terms of speech distortion, noise reduction, and signal-to-noise ratio improvement across different delays and degrees of acausality. Results show that the proposed acausal optimization consistently outperforms the causal approach across all metrics and scenarios, as acausal filters more effectively characterize the response of the desired source.

eess.AS↗

arXiv2025

Completing Sets of Prototype Transfer Functions for Subspace-based Direction of Arrival Estimation of Multiple Speakers

To estimate the direction of arrival (DOA) of multiple speakers, subspace-based prototype transfer function matching methods such as multiple signal classification (MUSIC) or relative transfer function (RTF) vector matching are commonly employed. In general, these methods require calibrated microphone arrays, which are characterized by a known array geometry or a set of known prototype transfer functions for several directions. In this paper, we consider a partially calibrated microphone array, composed of a calibrated binaural hearing aid and a (non-calibrated) external microphone at an unknown location with no available set of prototype transfer functions. We propose a procedure for completing sets of prototype transfer functions by exploiting the orthogonality of subspaces, allowing to apply matching-based DOA estimation methods with partially calibrated microphone arrays. For the MUSIC and RTF vector matching methods, experimental results for two speakers in noisy and reverberant environments clearly demonstrate that for all locations of the external microphone DOAs can be estimated more accurately with completed sets of prototype transfer functions than with incomplete sets. \c{opyright}20XX IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

eess.AS↗

arXiv2024

Reference Microphone Selection for the Weighted Prediction Error Algorithm using the Normalized L-p Norm

Reverberation may severely degrade the quality of speech signals recorded using microphones in a room. For compact microphone arrays, the choice of the reference microphone for multi-microphone dereverberation typically does not have a large influence on the dereverberation performance. In contrast, when the microphones are spatially distributed, the choice of the reference microphone may significantly contribute to the dereverberation performance. In this paper, we propose to perform reference microphone selection for the weighted prediction error (WPE) dereverberation algorithm based on the normalized $\ell_p$-norm of the dereverberated output signal. Experimental results for different source positions in a reverberant laboratory show that the proposed method yields a better dereverberation performance than reference microphone selection based on the early-to-late reverberation ratio or signal power.

eess.AS↗

arXiv2024

Low-Complexity Own Voice Reconstruction for Hearables with an In-Ear Microphone

Hearable devices, equipped with one or more microphones, are commonly used for speech communication. Here, we consider the scenario where a hearable is used to capture the user's own voice in a noisy environment. In this scenario, own voice reconstruction (OVR) is essential for enhancing the quality and intelligibility of the recorded noisy own voice signals. In previous work, we developed a deep learning-based OVR system, aiming to reduce the amount of device-specific recordings for training by using data augmentation with phoneme-dependent models of own voice transfer characteristics. Given the limited computational resources available on hearables, in this paper we propose low-complexity variants of an OVR system based on the FT-JNF architecture and investigate the required amount of device-specific recordings for effective data augmentation and fine-tuning. Simulation results show that the proposed OVR system considerably improves speech quality, even under constraints of low complexity and a limited amount of device-specific recordings.

eess.AS↗

arXiv2024

Steered Response Power-Based Direction-of-Arrival Estimation Exploiting an Auxiliary Microphone

Accurately estimating the direction-of-arrival (DOA) of a speech source using a compact microphone array (CMA) is often complicated by background noise and reverberation. A commonly used DOA estimation method is the steered response power with phase transform (SRP-PHAT) function, which has been shown to work reliably in moderate levels of noise and reverberation. Since for closely spaced microphones the spatial coherence of noise and reverberation may be high over an extended frequency range, this may negatively affect the SRP-PHAT spectra, resulting in DOA estimation errors. Assuming the availability of an auxiliary microphone at an unknown position which is spatially separated from the CMA, in this paper we propose to compute the SRP-PHAT spectra between the microphones of the CMA based on the SRP-PHAT spectra between the auxiliary microphone and the microphones of the CMA. For different levels of noise and reverberation, we show how far the auxiliary microphone needs to be spatially separated from the CMA for the auxiliary microphone-based SRP-PHAT spectra to be more reliable than the SRP-PHAT spectra without the auxiliary microphone. These findings are validated based on simulated microphone signals for several auxiliary microphone positions and two different noise and reverberation conditions.

eess.AS↗

arXiv2024

Array Geometry-Robust Attention-Based Neural Beamformer for Moving Speakers

Although mask-based beamforming is a powerful speech enhancement approach, it often requires manual parameter tuning to handle moving speakers. Recently, this approach was augmented with an attention-based spatial covariance matrix aggregator (ASA) module, enabling accurate tracking of moving speakers without manual tuning. However, the deep neural network model used in this module is limited to specific microphone arrays, necessitating a different model for varying channel permutations, numbers, or geometries. To improve the robustness of the ASA module against such variations, in this paper we investigate three approaches: training with random channel configurations, employing the transform-average-concatenate method to process multi-channel input features, and utilizing robust input features. Our experiments on the CHiME-3 and DEMAND datasets show that these approaches enable the ASA-augmented beamformer to track moving speakers across different microphone arrays unseen in training.

eess.AS↗

arXiv2024

Speech-dependent Data Augmentation for Own Voice Reconstruction with Hearable Microphones in Noisy Environments

Own voice pickup for hearables in noisy environments benefits from using both an outer and an in-ear microphone outside and inside the occluded ear. Due to environmental noise recorded at both microphones, and amplification of the own voice at low frequencies and band-limitation at the in-ear microphone, an own voice reconstruction system is needed to enable communication. A large amount of own voice signals is required to train a supervised deep learning-based own voice reconstruction system. Training data can either be obtained by recording a large amount of own voice signals of different talkers with a specific device, which is costly, or through augmentation of available speech data. Own voice signals can be simulated by assuming a linear time-invariant relative transfer function between hearable microphones for each phoneme, referred to as own voice transfer characteristics. In this paper, we propose data augmentation techniques for training an own voice reconstruction system based on speech-dependent models of own voice transfer characteristics between hearable microphones. The proposed techniques use few recorded own voice signals to estimate transfer characteristics and can then be used to simulate a large amount of own voice signals based on single-channel speech signals. Experimental results show that the proposed speech-dependent individual data augmentation technique leads to better performance compared to other data augmentation techniques or compared to training only on the available recorded own voice signals, and additional fine-tuning on the available recorded signals can improve performance further.

eess.AS↗

arXiv2024

Deep low-latency joint speech transmission and enhancement over a gaussian channel

Ensuring intelligible speech communication for hearing assistive devices in low-latency scenarios presents significant challenges in terms of speech enhancement, coding and transmission. In this paper, we propose novel solutions for low-latency joint speech transmission and enhancement, leveraging deep neural networks (DNNs). Our approach integrates two state-of-the-art DNN architectures for low-latency speech enhancement and low-latency analog joint source-channel-based transmission, creating a combined low-latency system and jointly training both systems in an end-to-end approach. Due to the computational demands of the enhancement system, this order is suitable when high computational power is unavailable in the decoder, like hearing assistive devices. The proposed system enables the configuration of total latency, achieving high performance even at latencies as low as 3 ms, which is typically challenging to attain. The simulation results provide compelling evidence that a joint enhancement and transmission system is superior to a simple concatenation system in diverse settings, encompassing various wireless channel conditions, latencies, and background noise scenarios.

eess.AS↗

arXiv2024

Modeling of Speech-dependent Own Voice Transfer Characteristics for Hearables with In-ear Microphones

Many hearables contain an in-ear microphone, which may be used to capture the own voice of its user. However, due to the hearable occluding the ear canal, the in-ear microphone mostly records body-conducted speech, typically suffering from band-limitation effects and amplification at low frequencies. Since the occlusion effect is determined by the ratio between the air-conducted and body-conducted components of own voice, the own voice transfer characteristics between the outer face of the hearable and the in-ear microphone depend on the speech content and the individual talker. In this paper, we propose a speech-dependent model of the own voice transfer characteristics based on phoneme recognition, assuming a linear time-invariant relative transfer function for each phoneme. We consider both individual models as well as models averaged over several talkers. Experimental results based on recordings with a prototype hearable show that the proposed speech-dependent model enables to simulate in-ear signals more accurately than a speech-independent model in terms of technical measures, especially under utterance mismatch and talker mismatch. Additionally, simulation results show that talker-averaged models generalize better to different talkers than individual models.

eess.AS↗

arXiv2024

Binaural Speech Enhancement Using Deep Complex Convolutional Transformer Networks

Studies have shown that in noisy acoustic environments, providing binaural signals to the user of an assistive listening device may improve speech intelligibility and spatial awareness. This paper presents a binaural speech enhancement method using a complex convolutional neural network with an encoder-decoder architecture and a complex multi-head attention transformer. The model is trained to estimate individual complex ratio masks in the time-frequency domain for the left and right-ear channels of binaural hearing devices. The model is trained using a novel loss function that incorporates the preservation of spatial information along with speech intelligibility improvement and noise reduction. Simulation results for acoustic scenarios with a single target speaker and isotropic noise of various types show that the proposed method improves the estimated binaural speech intelligibility and preserves the binaural cues better in comparison with several baseline algorithms.

eess.AS↗

arXiv2024

Microphone Subset Selection for the Weighted Prediction Error Algorithm using a Group Sparsity Penalty

Reverberation can severely degrade the quality of speech signals recorded using microphones in an enclosure. In acoustic sensor networks with spatially distributed microphones, a similar dereverberation performance may be achieved using only a subset of all available microphones. Using the popular convex relaxation method, in this paper we propose to perform microphone subset selection for the weighted prediction error (WPE) multi-channel dereverberation algorithm by introducing a group sparsity penalty on the prediction filter coefficients. The resulting problem is shown to be solved efficiently using the accelerated proximal gradient algorithm. Experimental evaluation using measured impulse responses shows that the performance of the proposed method is close to the optimal performance obtained by exhaustive search, both for frequency-dependent as well as frequency-independent microphone subset selection. Furthermore, the performance using only a few microphones for frequency-independent microphone subset selection is only marginally worse than using all available microphones.

eess.AS↗

arXiv2024

Effect of target signals and delays on spatially selective active noise control for open-fitting hearables

Spatially selective active noise control (ANC) hearables are designed to reduce unwanted noise from certain directions while preserving desired sounds from other directions. In previous studies, the target signal has been defined either as the delayed desired component in one of the reference microphone signals or as the desired component in the error microphone signal without any delay. In this paper, we systematically investigate the influence of delays in different target signals on the ANC performance and provide an intuitive explanation for how the system obtains the desired signal. Simulations were conducted on a pair of open-fitting hearables for localized speech and noise sources in an anechoic environment. The performance was assessed in terms of noise reduction, signal quality and control effort. Results indicate that optimal performance is achieved without delays when the target signal is defined at the error microphone, whereas causality necessitates delays when the target signal is defined at the reference microphone. The optimal delay is found to be the acoustic delay between this reference microphone and the error microphone from the desired source.

eess.AS↗