arXiv subjects

Siddarth Jain

Publications and source records attributed to Siddarth Jain.

18 recordsLinked to original sources

arXiv2026

Sensing Which Modality Matters: Evidence-Gated Regularization for Robust VLA Policies

Vision-Language-Action (VLA) policies fuse multimodal sensory inputs, but training on limited and homogeneous robot demonstrations encourages spurious inter-sensor correlations rather than task-relevant signal, a failure we term modality entanglement. Under real-world occlusions and distractors, this manifests as nuisance sensitivity to corruption of uninformative sensors and single-modality insufficiency when only one informative sensor remains intact. We propose Evidence-Gated Regularization (EGR), a modality-agnostic training objective that introduces zero inference-time overhead. EGR derives a per-frame and per-sensor task-relevance signal to gate two state-conditional consistency objectives: invariance on low-evidence sensors, and single-sensor sufficiency on high-evidence ones. We introduce a benchmark based on BEHAVIOR-1K, comprising a fast inference-only diagnostic suite and 47 rollout-based skills targeting modality entanglement. We validate EGR on this benchmark and on two real-robot setups with fundamentally different embodiments: a bi-manual setup with two Kinova arms and three RGB cameras, and a single-arm MELFA ASSISTA setup combining vision and GelSight tactile sensors. EGR improves simulation success rates (SR) from 12.5% to 16.4% under full modalities (+31%), from 9.4% to 16.5% under uninformative-sensor corruption (+75%), and from 2.8% to 6.1% under single-sensor fallback (+120%). Under physical-object distractors, EGR boosts SR from 30% to 85% on the bi-manual setup (+183%) and from 55% to 70% on the tactile setup (+27%).

cs.RO↗

arXiv2026

VOLT: Vision and Language Trajectory Segmentation for Faster-than-Demonstration Policies

Humans often take longer to demonstrate a task than a robot would need to execute it. Rather than learning to replicate the demonstration at the same pace, many industrial and practical applications require robots to perform tasks as quickly as possible. In this paper, we investigate several hypotheses for learning policies that operate faster-than-demonstrations. Our experiments show that the most effective strategy is to downsample recorded demonstrations and train the robot's policy on this accelerated data. However, uniformly downsampling an entire trajectory can be problematic. Some parts of a task can be safely sped up (e.g., unconstrained motion), while others demand slower, more precise motion (e.g., object interactions or fine manipulation). To address this challenge, we introduce VOLT, a vision-and-language trajectory segmentation method that reasons over video demonstrations, and leverages contextual cues to determine when acceleration is appropriate and when careful precision is required. VOLT identifies segments where slow, deliberate motion is necessary, then selectively downsamples the remaining segments. The resulting reformatted trajectories can be used with standard imitation learning approaches, such as diffusion policies. Our results highlight that segmentation quality is critical---baseline methods often misidentify when acceleration is possible, leading to overly cautious or unreliable policies. Compared to state-of-the-art alternatives, VOLT allows robots to execute tasks faster while maintaining strong performance. See our project website: https://volt2026.github.io/VOLT2026

cs.RO↗

arXiv2026

SplatCtrl: Perception-Action Coupling via Gaussian Scene Representations and Reactive Robot Control

Robotic manipulators excel in structured environments but face substantial challenges in unstructured and dynamic settings. This paper presents SplatCtrl, a unified framework for real-time scene reconstruction and reactive robot motion generation to enable collision-free robotic arm control in previously unseen and continuously changing environments. Building on 3D Gaussian Splatting (3D-GS), we introduce a hybrid voxel-based filtering and dynamic Gaussian relocation strategy that supports efficient scene reconstruction from RGB-D streams while accommodating environmental changes. For safe and reactive control, we further propose a method for deriving continuous signed distance functions from isotropic Gaussians, providing stable and differentiable collision probability estimates that bridge classical distance fields with the modern implicit representation. These continuous distance metrics are incorporated into control barrier functions, resulting in a unified perception-action coupling framework that supports smooth and reliable real-time motion generation in response to scene changes. Experimental validation in simulation, on physical robot, and within shared human-robot workspace demonstrates the framework's effectiveness, achieving integrated scene reconstruction and reactive control in uncertain, and dynamic environments.

cs.RO↗

arXiv2026

FurnitureVLA: Learning Long-Horizon Bimanual Furniture Assembly with Vision-Language-Action Model

Current work on robot furniture assembly mostly focuses on toy-scale settings or single-arm manipulation. We introduce FurnitureVLA, the first systematic study of real-scale bimanual furniture assembly using Vision-Language-Action models (VLAs). We formalize the task, develop a scalable simulation pipeline for expert data generation and evaluation, and build a VR teleoperation system for single-operator bimanual control to collect high-quality real-world demonstrations. To address extreme long-horizon assembly with up to 7 subtasks and 1550 control steps, we propose a progress-enhanced VLA, finetuned on semantically grounded subtasks, that jointly predicts actions and a continuous progress signal, enabling automatic subtask transitions and reducing compounding errors during inference. We further study perception and control design factors that critically affect precision in real-scale assembly. FurnitureVLA improves average simulation success from 48% to 80% compared to baselines across three furniture types, with an additional 21% gain from our design factor study. We validate on a real Kinova Gen3 platform with only 16% drop on the hardest task.

cs.RO↗

arXiv2026

LLMPhy: Parameter-Identifiable Physical Reasoning Combining Large Language Models and Physics Engines

Most learning-based approaches to complex physical reasoning sidestep the crucial problem of parameter identification (e.g., mass, friction) that governs scene dynamics, despite its importance in real-world applications such as collision avoidance and robotic manipulation. In this paper, we present LLMPhy, a black-box optimization framework that integrates large language models (LLMs) with physics simulators for physical reasoning. The core insight of LLMPhy is to bridge the textbook physical knowledge embedded in LLMs with the world models implemented in modern physics engines, enabling the construction of digital twins of input scenes via latent parameter estimation. Specifically, LLMPhy decomposes digital twin construction into two subproblems: (i) a continuous problem of estimating physical parameters and (ii) a discrete problem of estimating scene layout. For each subproblem, LLMPhy iteratively prompts the LLM to generate computer programs encoding parameter estimates, executes them in the physics engine to reconstruct the scene, and uses the resulting reconstruction error as feedback to refine the LLM's predictions. As existing physical reasoning benchmarks rarely account for parameter identifiability, we introduce three new datasets designed to evaluate physical reasoning in zero-shot settings. Our results show that LLMPhy achieves state-of-the-art performance on our tasks, recovers physical parameters more accurately, and converges more reliably than prior black-box methods. See the LLMPhy project page for details: https://www.merl.com/research/highlights/LLMPhy

cs.LG↗

arXiv2025

Robot Confirmation Generation and Action Planning Using Long-context Q-Former Integrated with Multimodal LLM

Human-robot collaboration towards a shared goal requires robots to understand human action and interaction with the surrounding environment. This paper focuses on human-robot interaction (HRI) based on human-robot dialogue that relies on the robot action confirmation and action step generation using multimodal scene understanding. The state-of-the-art approach uses multimodal transformers to generate robot action steps aligned with robot action confirmation from a single clip showing a task composed of multiple micro steps. Although actions towards a long-horizon task depend on each other throughout an entire video, the current approaches mainly focus on clip-level processing and do not leverage long-context information. This paper proposes a long-context Q-former incorporating left and right context dependency in full videos. Furthermore, this paper proposes a text-conditioning approach to feed text embeddings directly into the LLM decoder to mitigate the high abstraction of the information in text by Q-former. Experiments with the YouCook2 corpus show that the accuracy of confirmation generation is a major factor in the performance of action planning. Furthermore, we demonstrate that the long-context Q-former improves the confirmation and action planning by integrating VideoLLaMA3.

cs.RO↗

arXiv2024

Open Human-Robot Collaboration using Decentralized Inverse Reinforcement Learning

The growing interest in human-robot collaboration (HRC), where humans and robots cooperate towards shared goals, has seen significant advancements over the past decade. While previous research has addressed various challenges, several key issues remain unresolved. Many domains within HRC involve activities that do not necessarily require human presence throughout the entire task. Existing literature typically models HRC as a closed system, where all agents are present for the entire duration of the task. In contrast, an open model offers flexibility by allowing an agent to enter and exit the collaboration as needed, enabling them to concurrently manage other tasks. In this paper, we introduce a novel multiagent framework called oDec-MDP, designed specifically to model open HRC scenarios where agents can join or leave tasks flexibly during execution. We generalize a recent multiagent inverse reinforcement learning method - Dec-AIRL to learn from open systems modeled using the oDec-MDP. Our method is validated through experiments conducted in both a simplified toy firefighting domain and a realistic dyadic human-robot collaborative assembly. Results show that our framework and learning method improves upon its closed system counterpart.

cs.RO↗

arXiv2024

DECAF: a Discrete-Event based Collaborative Human-Robot Framework for Furniture Assembly

This paper proposes a task planning framework for collaborative Human-Robot scenarios, specifically focused on assembling complex systems such as furniture. The human is characterized as an uncontrollable agent, implying for example that the agent is not bound by a pre-established sequence of actions and instead acts according to its own preferences. Meanwhile, the task planner computes reactively the optimal actions for the collaborative robot to efficiently complete the entire assembly task in the least time possible. We formalize the problem as a Discrete Event Markov Decision Problem (DE-MDP), a comprehensive framework that incorporates a variety of asynchronous behaviors, human change of mind and failure recovery as stochastic events. Although the problem could theoretically be addressed by constructing a graph of all possible actions, such an approach would be constrained by computational limitations. The proposed formulation offers an alternative solution utilizing Reinforcement Learning to derive an optimal policy for the robot. Experiments where conducted both in simulation and on a real system with human subjects assembling a chair in collaboration with a 7-DoF manipulator.

cs.RO↗

arXiv2024

Autonomous Robotic Assembly: From Part Singulation to Precise Assembly

Imagine a robot that can assemble a functional product from the individual parts presented in any configuration to the robot. Designing such a robotic system is a complex problem which presents several open challenges. To bypass these challenges, the current generation of assembly systems is built with a lot of system integration effort to provide the structure and precision necessary for assembly. These systems are mostly responsible for part singulation, part kitting, and part detection, which is accomplished by intelligent system design. In this paper, we present autonomous assembly of a gear box with minimum requirements on structure. The assembly parts are randomly placed in a two-dimensional work environment for the robot. The proposed system makes use of several different manipulation skills such as sliding for grasping, in-hand manipulation, and insertion to assemble the gear box. All these tasks are run in a closed-loop fashion using vision, tactile, and Force-Torque (F/T) sensors. We perform extensive hardware experiments to show the robustness of the proposed methods as well as the overall system. See supplementary video at https://www.youtube.com/watch?v=cZ9M1DQ23OI.

cs.RO↗

arXiv2023

Interactive Planning Using Large Language Models for Partially Observable Robotics Tasks

Designing robotic agents to perform open vocabulary tasks has been the long-standing goal in robotics and AI. Recently, Large Language Models (LLMs) have achieved impressive results in creating robotic agents for performing open vocabulary tasks. However, planning for these tasks in the presence of uncertainties is challenging as it requires \enquote{chain-of-thought} reasoning, aggregating information from the environment, updating state estimates, and generating actions based on the updated state estimates. In this paper, we present an interactive planning technique for partially observable tasks using LLMs. In the proposed method, an LLM is used to collect missing information from the environment using a robot and infer the state of the underlying problem from collected observations while guiding the robot to perform the required actions. We also use a fine-tuned Llama 2 model via self-instruct and compare its performance against a pre-trained LLM like GPT-4. Results are demonstrated on several tasks in simulation as well as real-world environments. A video describing our work along with some results could be found here.

cs.RO↗

arXiv2023

EARL: Eye-on-Hand Reinforcement Learner for Dynamic Grasping with Active Pose Estimation

In this paper, we explore the dynamic grasping of moving objects through active pose tracking and reinforcement learning for hand-eye coordination systems. Most existing vision-based robotic grasping methods implicitly assume target objects are stationary or moving predictably. Performing grasping of unpredictably moving objects presents a unique set of challenges. For example, a pre-computed robust grasp can become unreachable or unstable as the target object moves, and motion planning must also be adaptive. In this work, we present a new approach, Eye-on-hAnd Reinforcement Learner (EARL), for enabling coupled Eye-on-Hand (EoH) robotic manipulation systems to perform real-time active pose tracking and dynamic grasping of novel objects without explicit motion prediction. EARL readily addresses many thorny issues in automated hand-eye coordination, including fast-tracking of 6D object pose from vision, learning control policy for a robotic arm to track a moving object while keeping the object in the camera's field of view, and performing dynamic grasping. We demonstrate the effectiveness of our approach in extensive experiments validated on multiple commercial robotic arms in both simulations and complex real-world tasks.

cs.RO↗

arXiv2023

Style-transfer based Speech and Audio-visual Scene Understanding for Robot Action Sequence Acquisition from Videos

To realize human-robot collaboration, robots need to execute actions for new tasks according to human instructions given finite prior knowledge. Human experts can share their knowledge of how to perform a task with a robot through multi-modal instructions in their demonstrations, showing a sequence of short-horizon steps to achieve a long-horizon goal. This paper introduces a method for robot action sequence generation from instruction videos using (1) an audio-visual Transformer that converts audio-visual features and instruction speech to a sequence of robot actions called dynamic movement primitives (DMPs) and (2) style-transfer-based training that employs multi-task learning with video captioning and weakly-supervised learning with a semantic classifier to exploit unpaired video-action data. We built a system that accomplishes various cooking actions, where an arm robot executes a DMP sequence acquired from a cooking video using the audio-visual Transformer. Experiments with Epic-Kitchen-100, YouCookII, QuerYD, and in-house instruction video datasets show that the proposed method improves the quality of DMP sequences by 2.3 times the METEOR score obtained with a baseline video-to-action Transformer. The model achieved 32% of the task success rate with the task knowledge of the object.

cs.CL↗

arXiv2023

Learning Generalizable Pivoting Skills

The skill of pivoting an object with a robotic system is challenging for the external forces that act on the system, mainly given by contact interaction. The complexity increases when the same skills are required to generalize across different objects. This paper proposes a framework for learning robust and generalizable pivoting skills, which consists of three steps. First, we learn a pivoting policy on an ``unitary'' object using Reinforcement Learning (RL). Then, we obtain the object's feature space by supervised learning to encode the kinematic properties of arbitrary objects. Finally, to adapt the unitary policy to multiple objects, we learn data-driven projections based on the object features to adjust the state and action space of the new pivoting task. The proposed approach is entirely trained in simulation. It requires only one depth image of the object and can zero-shot transfer to real-world objects. We demonstrate robustness to sim-to-real transfer and generalization to multiple objects.

cs.RO↗

arXiv2022

Task-Directed Exploration in Continuous POMDPs for Robotic Manipulation of Articulated Objects

Representing and reasoning about uncertainty is crucial for autonomous agents acting in partially observable environments with noisy sensors. Partially observable Markov decision processes (POMDPs) serve as a general framework for representing problems in which uncertainty is an important factor. Online sample-based POMDP methods have emerged as efficient approaches to solving large POMDPs and have been shown to extend to continuous domains. However, these solutions struggle to find long-horizon plans in problems with significant uncertainty. Exploration heuristics can help guide planning, but many real-world settings contain significant task-irrelevant uncertainty that might distract from the task objective. In this paper, we propose STRUG, an online POMDP solver capable of handling domains that require long-horizon planning with significant task-relevant and task-irrelevant uncertainty. We demonstrate our solution on several temporally extended versions of toy POMDP problems as well as robotic manipulation of articulated objects using a neural perception frontend to construct a distribution of possible models. Our results show that STRUG outperforms the current sample-based online POMDP solvers on several tasks.

cs.RO↗

arXiv2022

Generalizable Human-Robot Collaborative Assembly Using Imitation Learning and Force Control

Robots have been steadily increasing their presence in our daily lives, where they can work along with humans to provide assistance in various tasks on industry floors, in offices, and in homes. Automated assembly is one of the key applications of robots, and the next generation assembly systems could become much more efficient by creating collaborative human-robot systems. However, although collaborative robots have been around for decades, their application in truly collaborative systems has been limited. This is because a truly collaborative human-robot system needs to adjust its operation with respect to the uncertainty and imprecision in human actions, ensure safety during interaction, etc. In this paper, we present a system for human-robot collaborative assembly using learning from demonstration and pose estimation, so that the robot can adapt to the uncertainty caused by the operation of humans. Learning from demonstration is used to generate motion trajectories for the robot based on the pose estimate of different goal locations from a deep learning-based vision system. The proposed system is demonstrated using a physical 6 DoF manipulator in a collaborative human-robot assembly scenario. We show successful generalization of the system's operation to changes in the initial and final goal locations through various experiments.

cs.RO↗

arXiv2022

Design of Adaptive Compliance Controllers for Safe Robotic Assembly

Insertion operations are a critical element of most robotic assembly operation, and peg-in-hole (PiH) insertion is one of the most widely studied tasks in the industrial and academic manipulation communities. PiH insertion is in fact an entire class of problems, where the complexity of the problem can depend on the type of misalignment and contact formation during an insertion attempt. In this paper, we present the design and analysis of adaptive compliance controllers which can be used in insertion-type assembly tasks, including learning-based compliance controllers which can be used for insertion problems in the presence of uncertainty in the goal location during robotic assembly. We first present the design of compliance controllers which can ensure safe operation of the robot by limiting experienced contact forces during contact formation. Consequently, we present analysis of the force signature obtained during the contact formation to learn the corrective action needed to perform insertion. Finally, we use the proposed compliance controllers and learned models to design a policy that can successfully perform insertion in novel test conditions with almost perfect success rate. We validate the proposed approach on a physical robotic test-bed using a 6-DoF manipulator arm.

cs.RO↗

arXiv2022

Learning to Synthesize Volumetric Meshes from Vision-based Tactile Imprints

Vision-based tactile sensors typically utilize a deformable elastomer and a camera mounted above to provide high-resolution image observations of contacts. Obtaining accurate volumetric meshes for the deformed elastomer can provide direct contact information and benefit robotic grasping and manipulation. This paper focuses on learning to synthesize the volumetric mesh of the elastomer based on the image imprints acquired from vision-based tactile sensors. Synthetic image-mesh pairs and real-world images are gathered from 3D finite element methods (FEM) and physical sensors, respectively. A graph neural network (GNN) is introduced to learn the image-to-mesh mappings with supervised learning. A self-supervised adaptation method and image augmentation techniques are proposed to transfer networks from simulation to reality, from primitive contacts to unseen contacts, and from one sensor to another. Using these learned and adapted networks, our proposed method can accurately reconstruct the deformation of the real-world tactile sensor elastomer in various domains, as indicated by the quantitative and qualitative results.

cs.RO↗

arXiv2022

InSeGAN: A Generative Approach to Segmenting Identical Instances in Depth Images

In this paper, we present InSeGAN, an unsupervised 3D generative adversarial network (GAN) for segmenting (nearly) identical instances of rigid objects in depth images. Using an analysis-by-synthesis approach, we design a novel GAN architecture to synthesize a multiple-instance depth image with independent control over each instance. InSeGAN takes in a set of code vectors (e.g., random noise vectors), each encoding the 3D pose of an object that is represented by a learned implicit object template. The generator has two distinct modules. The first module, the instance feature generator, uses each encoded pose to transform the implicit template into a feature map representation of each object instance. The second module, the depth image renderer, aggregates all of the single-instance feature maps output by the first module and generates a multiple-instance depth image. A discriminator distinguishes the generated multiple-instance depth images from the distribution of true depth images. To use our model for instance segmentation, we propose an instance pose encoder that learns to take in a generated depth image and reproduce the pose code vectors for all of the object instances. To evaluate our approach, we introduce a new synthetic dataset, "Insta-10", consisting of 100,000 depth images, each with 5 instances of an object from one of 10 classes. Our experiments on Insta-10, as well as on real-world noisy depth images, show that InSeGAN achieves state-of-the-art performance, often outperforming prior methods by large margins.

cs.CV↗