arXiv subjects

Shuting Li

Publications and source records attributed to Shuting Li.

15 recordsLinked to original sources

arXiv2025

Early Evolution of the Cavity and Core of a Coronal Mass Ejection in the Inner Corona

Coronal mass ejections (CMEs) typically exhibit a three-component structure in white-light (WL) coronagraphs. Utilizing the seamless observations of the inner corona ($\le$ 3 R$_\odot$), we have revealed the early evolution of the cavity and core of a CME starting at $\sim$18:20 UT on 2014 October 14. The CME originates from a hot channel (HC), which appears as the bright core and compresses the cavity in WL images. Specifically, most of the dark cavity in WL is filled by bright loop-like structures in 174 \AA. The differential emission measure (DEM) analysis indicates that the electron temperature decreases from the core ($\sim$13.4 MK) to the cavity ($\sim$1.35 MK), and the CME cavity is significantly cooler than that enshrouding a prominence ($\ge$ 2 MK). The effective temperature of the cavity increases over time in general, probably due to the compression by the HC expansion. The evolution of the CME bright core includes slow-rise, fast-rise (up to $\sim$330 km s$^{-1}$), and residual-acceleration phases. The cavity exhibits an evolution similar to the core but lags by $\sim$4 minutes, with a lower speed peaking at $\sim$220 km s$^{-1}$. Moreover, the 2D radial speed distribution exhibits the highest speeds at the core apex. The kinematical results further confirm the compression of the cavity. The present event supports the new explanation of the CME structures, i.e., the magnetic flux rope (MFR), which is proxied by the HC, is only responsible for the core, while the cavity is likely a low-density region between the CME front and the MFR.

astro-ph.SR↗

arXiv2025

Understanding the Ly{\alpha} Emission Observed by the Solar Disk Imager Aboard the Advanced Space-based Solar Observatory

The H I Lyman-alpha (Ly$\alpha$) emission, with a wavelength of 1216 \r{A}, is the brightest solar ultraviolet (UV) line. However, comprehensive observations of the Ly$\alpha$ emission line across the full solar disk remain limited. As part of the ASO-S mission, the Solar Disk Imager (SDI) has successfully captured full-disk images in the Ly$\alpha$ band. Gaussian fitting of SDI's spectral response function (SRF) yields a full width at half maximum (FWHM) of approximately 85 \r{A}, which is significantly broader than the distance of Si III line at 1206 \r{A} and the Ly$\alpha$ line. Thus, the emission contribution of Si III to the SDI Ly$\alpha$ passband needs to be considered. For flares, in practice, we calculated the integrated intensity ratio $I$(Si III)/$I$(Ly$\alpha$) by analyzing spectral observations from the SOLSTICE instrument. It yields values between 1.7% and 14.6%. Empirically, the ratio is proportional to the SXR flux. Further analysis of spectral data from the SUMER instrument reveals that the ratio $I$(Si III)/$I$(Ly$\alpha$) is approximately 0.5% for prominences, 0.7%--0.9% for the inner disk, and 1.4%--1.9% close to the limb. These findings suggest that $I$(Si III)/$I$(Ly$\alpha$) is minimal for prominences and the inner disk, and the varying ratios across regions align with the center-to-limb variation of the Si III and Ly$\alpha$ lines. Additionally, we compared Ly$\alpha$ image intensity with 304 \r{A}, 1600 \r{A}, and 1700 \r{A} observations from AIA, as well as H$\alpha$ from CHASE, in multiple regions (a prominence region, two active regions, and a quiet region). A relatively higher correlation of about 85% is found between Ly$\alpha$ and 304 \r{A} in active regions, whereas in the quiet region and prominence, their correlation coefficients are about 55%.

astro-ph.SR↗

arXiv2024

Inflight Performance and Calibrations of the Lyman-alpha Solar Telescope on board the Advanced Space-based Solar Observatory

The Lyman-alpha Solar Telescope (LST) on board the Advanced Space-based Solar Observatory (ASO-S) is the first payload to image the full solar disk and the solar corona in both white-light (WL) and ultraviolet (UV) H I Lya, extending up to 2.5 solar radii (Rs). Since the launch of the ASO-S on 9 October 2022, LST has captured various significant solar activities including flares, prominences, coronal mass ejections (CMEs). LST covers different passbands of 121.6 nm, 360 nm and 700 nm. The Lya Solar Disk Imager (SDI) has a field of view (FOV) of 38.4 arcmin and a spatial resolution of around 9.5 arcsec, while the White-Light Solar Telescope (WST) has a FOV of 38.43 arcmin and a spatial resolution of around 3.0 arcsec. The FOV of the Lya Solar Corona Imager (SCI) reaches 81.1 arcmin and its spatial resolution is 4.3 arcsec. The stray-light level in the 700 nm waveband is about 7.8e-6 MSB (mean solar brightness) at 1.1 Rs and 7.6e-7 MSB at 2.5 Rs, and in the Lya waveband it is around 4.3e-3 MSB at 1.1 Rs and 4.1e-4 MSB at 2.5 Rs. This article will detail the results from on-orbit tests and calibrations.

astro-ph.SR↗

arXiv2024

Asymmetric Hard X-ray Radiation of Two Ribbons in a Thermal-Dominated C-Class Flare

The asymmetry in hard X-ray (HXR) emission at the footpoints (FPs) of flare loops is a ubiquitous feature closely associated with nonthermal electron transport. We analyze the asymmetric HXR radiation at two flare ribbons which is thermal-dominated during a long-duration C4.4 flare that occurred on March 20, 2023, combining multi-view and multi-waveband observations from the ASO-S, SolO, and SDO spacecraft. We find that the H I Ly$\alpha$ emission captures similar features to the He II $\lambda$304 in both light curve and spatio-temporal evolution of a pair of conjugate flare ribbons. The spectra and imaging analysis of the HXR emission, detected by STIX in 4-18 keV, reveal that the two-ribbon flare radiation is thermal dominated by over 95%, and the radiation source mainly concentrates on the northern ribbon, leading to an asymmetric distribution. To understand the underlying reasons for the HXR radiation asymmetry, we extrapolate the magnetic field within the active region using the NLFFF model. For 78% of the magnetic field lines starting from the northern flare ribbon, their lengths from the loop-tops (LTs) to the northern FPs are shorter than those to the southern FPs. For 62% of the field lines, their magnetic field strengths at the southern FPs exceed those at the northern FPs. In addition, considering the larger density, $\approx1.0\times10^{10}$ cm$^{-3}$, of the low-lying flare loops (< 32 Mm), we find the shorter path from the LT to the northern FP enables more electrons to reach the northern FP more easily after collisions with the surrounding plasma. Therefore, in this thermal-dominated C-class flare, the asymmetric location of the flare LT relative to its two FPs plays a dominant role in the HXR radiation asymmetry, while such asymmetry is also slightly influenced by the magnetic mirror effect resulting in larger HXR radiation at the FPs with weaker magnetic strength.

astro-ph.SR↗

arXiv2024

Association between a Failed Prominence Eruption and the Drainage of Mass from Another Prominence

Sympathetic eruptions of solar prominences have been studied for decades, however, it is usually difficult to identify their causal links. Here we present two failed prominence eruptions on 26 October 2022 and explore their connections. Using stereoscopic observations, the south prominence (PRO-S) erupts with untwisting motions, flare ribbons occur underneath, and new connections are formed during the eruption. The north prominence (PRO-N) rises up along with PRO-S, and its upper part disappears due to catastrophic mass draining along an elongated structure after PRO-S failed eruption. We suggest that the eruption of PRO-S initiates due to a kink instability, further rises up, and fails to erupt due to reconnection with surrounding fields. The elongated structure connecting PRO-N overlies PRO-S, which causes the rising up of PRO-N along with PRO-S and mass drainage after PRO-S eruption. This study suggests that a prominence may end its life through mass drainage forced by an eruption underneath.

astro-ph.SR↗

arXiv2024

Parameter effects on the total intensity of H I Ly{\alpha} line for a modelled coronal mass ejection and its driven shock

The combination of the H I Ly{\alpha} (121.6 nm) line formation mechanism with ultraviolet (UV) Ly{\alpha} and white-light (WL) observations provides an effective method for determining the electron temperature of coronal mass ejections (CMEs). A key to ensuring the accuracy of this diagnostic technique is the precise calculation of theoretical Ly{\alpha} intensities. This study performs a modelled CME and its driven shock via the 3D MHD simulation. We generate synthetic UV and WL images of the CME and shock to quantify the impact of different assumptions on theoretical Ly{\alpha} intensities, such as the incident intensity of the Ly{\alpha} line (Idisk), the geometric scattering function (p({\theta})), and the kinetic temperature (Tn) assumed to be equal to the proton (Tp) or electron (Te) temperatures. By comparing differences of the Ly{\alpha} intensities under these assumptions, we find that: (1) Using the uniform or Carrington maps of the disk Ly{\alpha} emission underestimates the corona Ly{\alpha} intensity (< 10%) compared to the synchronic map, except for a slight overestimate (< 4%) in the partial CME core. The Carrington map yields lower uncertainties than the uniform disk. (2) The geometric scattering process has a minor impact on the Ly{\alpha} intensity, with a maximum relative uncertainty of < 5%. The Ly{\alpha} intensity is underestimated for the most part but overestimated in the CME core. (3) Compared to the assumption Tn = Tp, using Tn = Te leads to more complex relative uncertainties in CME Ly{\alpha} intensity. The CME core and void are both overestimated, with the maximum uncertainty in the core exceeding 50% and the void remaining below 35%. In the CME front, both over- and under-estimates exist with relative uncertainties of < 35%. The electron temperature assumption has a smaller impact on the shock, with an underestimated relative uncertainty of less than 20%.

astro-ph.SR↗

arXiv2024

CAMEL. II. A 3D Coronal Mass Ejection Catalog Based on Coronal Mass Ejection Automatic Detection with Deep Learning

Coronal mass ejections (CMEs) are major drivers of geomagnetic storms, which may cause severe space weather effects. Automating the detection, tracking, and three-dimensional (3D) reconstruction of CMEs is important for operational predictions of CME arrivals. The COR1 coronagraphs on board the Solar Terrestrial Relations Observatory spacecraft have facilitated extensive polarization observations, which are very suitable for the establishment of a 3D CME system. We have developed such a 3D system comprising four modules: classification, segmentation, tracking, and 3D reconstructions. We generalize our previously pretrained classification model to classify COR1 coronagraph images. Subsequently, as there are no publicly available CME segmentation data sets, we manually annotate the structural regions of CMEs using Large Angle and Spectrometric Coronagraph C2 observations. Leveraging transformer-based models, we achieve state-of-the-art results in CME segmentation. Furthermore, we improve the tracking algorithm to solve the difficult separation task of multiple CMEs. In the final module, tracking results, combined with the polarization ratio technique are used to develop the first single-view 3D CME catalog without requiring manual mask annotation. Our method provides higher precision in automatic 2D CME catalog and more reliable physical parameters of CMEs, including 3D propagation direction and speed. The aforementioned 3D CME system can be applied to any coronagraph data with the capability of polarization measurements.

astro-ph.SR↗

arXiv2024

Refinement of global coronal and interplanetary magnetic field extrapolations constrained by remote-sensing and in-situ observations at the solar minimum

Solar magnetic fields are closely related to various physical phenomena on the sun, which can be extrapolated with different models from photospheric magnetograms. However, the Open Flux Problem (OFP), the underestimation of the magnetic field derived from the extrapolated model, is still unsolved. To minimize the impact of the OFP, we propose three evaluation parameters to quantitatively evaluate magnetic field models and determine the optimal free parameters in the models by constraining the coronal magnetic fields (CMFs) and the interplanetary magnetic fields (IMFs) with real observations. Although the OFP still exists, we find that magnetic field lines traced from the coronal models effectively capture the intricate topological configurations observed in the corona, including streamers and plumes. The OFP is lessened by using the HMI synoptic map instead of the GONG daily synoptic maps, and the PFSS+PFCS model instead of the CSSS model. For Carrington Rotation (CR) 2231 at the solar minimum, we suggest that the optimal parameters for the PFSS+PFCS model are $R_{\mathrm{ss}} = 2.2-2.5\ R_{\mathrm{sun}}$ and $R_{\mathrm{scs}} = 10.5-14.0\ R_{\mathrm{sun}}$, as well as for the CSSS model are $R_{\mathrm{cs}} = 2.0 - 2.4\ R_{\mathrm{sun}}$, $R_{\mathrm{ss}} = 11.0 - 14.7\ R_{\mathrm{sun}}$ and $a = 1.0\ R_{\mathrm{sun}}$. Despite the IMFs at 1 AU being consistent with the measurements by artificially increasing the polar magnetic fields, the IMFs near the sun are still underestimated. The OFP might be advanced by improving the accuracy of both the weak magnetic fields and polar magnetic fields, especially considering magnetic activities arising from interplanetary physical processes.

astro-ph.SR↗

arXiv2024

Spectral and Imaging Observations of a C2.3 White-Light Flare from the Advanced Space-Based Solar Observatory (ASO-S) and the Chinese H$\alpha$ Solar Explorer (CHASE)

Solar white-light flares are characterized by an enhancement in the optical continuum, which are usually large flares (say X- and M-class flares). Here we report a small C2.3 white-light flare (SOL2022-12-20T04:10) observed by the \emph{Advanced Space-based Solar Observatory} and the \emph{Chinese H$\alpha$ Solar Explorer}. This flare exhibits an increase of $\approx$6.4\% in the photospheric Fe \textsc{i} line at 6569.2\,\AA\ and {$\approx$3.2\%} in the nearby continuum. The continuum at 3600\,\AA\ also shows an enhancement of $\approx$4.7\%. The white-light brightening kernels are mainly located at the flare ribbons and co-spatial with nonthermal hard X-ray sources, which implies that the enhanced white-light emissions are related to nonthermal electron-beam heating. At the brightening kernels, the Fe \textsc{i} line displays an absorption profile that has a good Gaussian shape, with a redshift up to $\approx$1.7 km s$^{-1}$, while the H$\alpha$ line shows an emission profile though having a central reversal. The H$\alpha$ line profile also shows a red or blue asymmetry caused by plasma flows with a velocity of several to tens of km s$^{-1}$. It is interesting to find that the H$\alpha$ asymmetry is opposite at the conjugate footpoints. It is also found that the CHASE continuum increase seems to be related to the change of photospheric magnetic field. Our study provides comprehensive characteristics of a small white-light flare that help understand the energy release process of white-light flares.

astro-ph.SR↗

arXiv2024

A Statistical Study of Solar White-Light Flares Observed by the White-light Solar Telescope of the Lyman-alpha Solar Telescope on the Advanced Space-based Solar Observatory (ASO-S/LST/WST) at 360 nm

Solar white-light flares (WLFs) are those accompanied by brightenings in the optical continuum or integrated light. The White-light Solar Telescope (WST), as an instrument of the Lyman-alpha Solar Telescope (LST) on the Advanced Space-based Solar Observatory (ASO-S), provides continuous solar full-disk images at 360 nm, which can be used to study WLFs. We analyze 205 major flares above M1.0 from October 2022 to May 2023 and identify 49 WLFs at 360 nm from WST observations, i.e. with an occurrence rate of 23.9%. The percentages of WLFs for M1 - M4 (31 out of 180), M5 - M9 (11 out of 18), and above X1 (7 for all) flares are 17.2%, 61.1%, and 100%, respectively, namely the larger the flares, the more likely they are WLFs at 360 nm. We further analyze 39 WLFs among the identified WLFs and investigate their properties such as white-light enhancement, duration, and brightening area. It is found that the relative enhancement of the white-light emission at 360 nm is mostly (>90%) less than 30% and the mean enhancement is 19.4%. The WLFs' duration at 360 nm is mostly (>80%) less than 20 minutes and its mean is 10.3 minutes. The brightening area at 360 nm is mostly (>75%) less than 500 arcsecond2 and the median value is 225. We find that there exist good correlations between the white-light enhancement/duration/area and the peak soft X-ray (SXR) flux of the flare, with correlation coefficients of 0.68, 0.58, and 0.80, respectively. In addition, the white-light emission in most WLFs peaks around the same time as the temporal derivative of SXR flux as well as the hard X-ray emission at 20 - 50 keV, indicative of Neupert effect. It is also found that the limb WLFs are more likely to have a greater enhancement, which is consistent with numerical simulations.

astro-ph.SR↗

arXiv2023

Simultaneous Horizontal and Vertical Oscillation of a Quiescent Filament observed by CHASE and SDO

In this paper, we present the imaging and spectroscopic observations of the simultaneous horizontal and vertical large-amplitude oscillation of a quiescent filament triggered by an EUV wave on 2022 October 02. Particularly, the filament oscillation involved winking phenomenon in Ha images and horizontal motions in EUV images. Originally, a filament and its overlying loops across AR 13110 and 13113 erupted with a highly inclined direction, resulting in an X1.0 flare and a non-radial CME. The fast lateral expansion of loops excited an EUV wave and the corresponding Moreton wave propagating northward. Once the EUV wavefront arrived at the quiescent filament, the filament began to oscillate coherently along the horizontal direction and the winking filament appeared concurrently in Ha images. The horizontal oscillation involved an initial amplitude of 10.2 Mm and a velocity amplitude of 46.5 km/s, lasting for 3 cycles with a period of 18.2 minutes and a damping time of 31.1 minutes. The maximum Doppler velocities of the oscillating filament are 18 km/s (redshift) and 24 km/s (blueshift), which was derived from the spectroscopic data provided by CHASE/HIS. The three-dimensional velocity of the oscillation is determined to be 50 km/s at an angle of 50 to the local photosphere plane. Based on the wave-filament interaction, the minimum energy of the EUV wave is estimated to be 2.7 10 20 J. Furthermore, this event provides evidence that Moreton wavesshould be excited by the highly inclined eruptions.

astro-ph.SR↗

arXiv2022

Statistical analysis of circular-ribbon flares

Circular-ribbon flares (CFs) are a special type of solar flares owing to their particular magnetic topology. In this paper, we conducted a comprehensive statistical analysis of 134 CFs from 2011 September to 2017 June, including four B-class, 82 C-class, 40 M-class, and eight X-class flares, respectively. The flares were observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) spacecraft. The physical properties of CFs are derived, including the location, area ($A_{CF}$), equivalent radius ($r_{CF}$) assuming a semi-spherical fan dome, lifetime ($\tau_{CF}$), and peak SXR flux in 1$-$8 {\AA}. It is found that all CFs are located in active regions, with the latitudes between -30$^\circ$ and 30$^\circ$. The distributions of areas and lifetimes could be fitted with a log-normal function. There is a positive correlation between the lifetime and area. The peak SXR flux in 1$-$8 {\AA} is well in accord with a power-law distribution with an index of $-$1.42. For the 134 CFs, 57\% of them are accompanied by remote brightenings or ribbons. A positive correlation exists between the total length ($L_{RB}$) and average distance ($D_{RB}$) of remote brightenings. About 47\% and 51\% of the 134 CFs are related to type III radio bursts and jets, respectively. The association rates are independent of flare energies. About 38\% of CFs are related to mini-filament eruptions, and the association rates increase with flare classes. Only 28\% of CFs are related to CMEs, meaning that a majority of them are confined rather than eruptive events. There is a positive correlation between the CME speed and peak SXR flux in 1$-$8 {\AA}, and faster CMEs tend to be wider.

astro-ph.SR↗

arXiv2022

Three-dimensional analyses of an aspherical coronal mass ejection and its driven shock

Context. Observations reveal that shocks can be driven by fast coronal mass ejections (CMEs) and play essential roles in particle accelerations. A critical ratio, $\delta$, derived from a shock standoff distance normalized by the radius of curvature (ROC) of a CME, allows us to estimate shock and ambient coronal parameters. However, true ROCs of CMEs are difficult to measure due to observed projection effects. Aims. We investigate the formation mechanism of a shock driven by an aspherical CME without evident lateral expansion. Through three-dimensional (3D) reconstructions without a priori assumptions of the object morphology, we estimate two principal ROCs of the CME surface and demonstrate how the difference between two principal ROCs of the CME affects the estimate of the coronal physical parameters. Methods. The CME was observed by the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) instruments and the Large Angle and Spectrometric Coronagraph (LASCO). We used the mask-fitting method to obtain the irregular 3D shape of the CME and reconstructed the shock surface using the bow-shock model. Through smoothings with fifth-order polynomial functions and Monte Carlo simulations, we calculated the ROCs at the CME nose. Results. We find that (1) the maximal ROC is 2-4 times the minimal ROC of the CME. A significant difference between the CME ROCs implies that the assumption of one ROC of an aspherical CME could cause over-/under- estimations of the shock and coronal parameters. (2) The shock nose obeys the bow-shock formation mechanism, considering the constant standoff distance and the similar speed between the shock and CME around the nose. (3) With a more precise $\delta$ calculated via 3D ROCs in space, we derive corona parameters at high latitudes of about -50$^{\circ}$, including the Alfv{\'e}n speed and the coronal magnetic field strength.

astro-ph.SR↗

arXiv2019

A New Automatic Tool for CME Detection and Tracking with Machine Learning Techniques

With the accumulation of big data of CME observations by coronagraphs, automatic detection and tracking of CMEs has proven to be crucial. The excellent performance of convolutional neural network in image classification, object detection and other computer vision tasks motivates us to apply it to CME detection and tracking as well. We have developed a new tool for CME Automatic detection and tracking with MachinE Learning (CAMEL) techniques. The system is a three-module pipeline. It is first a supervised image classification problem. We solve it by training a neural network LeNet with training labels obtained from an existing CME catalog. Those images containing CME structures are flagged as CME images. Next, to identify the CME region in each CME-flagged image, we use deep descriptor transforming to localize the common object in an image set. A following step is to apply the graph cut technique to finely tune the detected CME region. To track the CME in an image sequence, the binary images with detected CME pixels are converted from cartesian to polar coordinate. A CME event is labeled if it can move in at least two frames and reach the edge of coronagraph field of view. For each event, a few fundamental parameters are derived. The results of four representative CMEs with various characteristics are presented and compared with those from four existing automatic and manual catalogs. We find that CAMEL can detect more complete and weaker structures, and has better performance to catch a CME as early as possible.

astro-ph.SR↗

arXiv2016

Porting Code Across Simple Mobile Robots

The StarL programming framework aims to simplify development of distributed robotic applications by providing easy-to-use language constructs for communication and control. It has been used to develop applications such as formation control, distributed tracking, and collaborative search. In this paper, we present a complete redesign of the StarL language and its runtime system which enables us to achieve portability of robot programs across platforms. Thus, the same application program, say, for distributed tracking, can now be compiled and deployed on multiple, heterogeneous robotic platforms. Towards portability, this we first define the semantics of StarL programs in a way that is largely platform independent, except for a few key platform-dependent parameters that capture the worst-case execution and sensing delays and resolution of sensors. Next, we present a design of the StarL runtime system, including a robot controller, that meets the above semantics. The controller consists of a platform-independent path planner implemented using RRTs and a platform-dependent way-point tracker that is implemented using the control commands available for the platform. We demonstrate portability of StarL applications using simulation results for two different robotic platforms, and several applications.

cs.RO↗