arXiv Science⌕ Search

arXiv subjects

Shutaro Mohri

Publications and source records attributed to Shutaro Mohri.

2 recordsLinked to original sources

Advancing Electroformed X-ray Optics Bridging Synchrotron Radiation Technology and Space Astronomy: Improved Figure Accuracy and X-ray Imaging Performancev

We have developed high-resolution electroformed nickel X-ray telescope mirrors by extending precision mirror-fabrication techniques developed for synchrotron X-ray microscopy to space astronomy. Our previous study identified axial figure errors of a replicated mirror as one of the factors limiting its X-ray angular resolution. In the present study, we fabricated a new mirror using a substantially improved mandrel and directly compared the two-dimensional figure errors of the mandrels and replicated inner mirror surfaces for both the previous and new mandrel--mirror pairs. This comparison reveals how contributions to the final mirror figure errors changed with improved mandrel accuracy. For the previous mirror, the mandrel and mirror showed a strong spatial correlation in their figure errors, indicating that a substantial component of the mirror figure pattern was inherited from the mandrel. In contrast, after improving the mandrel figure, the new mirror exhibited a weaker mandrel--mirror spatial correlation, while the residual figure deviations arising between the mandrel and final mirror became comparable in magnitude to the residual mandrel figure errors. The improved mandrel reduced the central 68% widths, W68, of the axial slope error distribution from 3.3 to 1.6 arcsec for the paraboloidal surface and from 5.0 to 1.1 arcsec for the hyperboloidal surface. Correspondingly, the mirror values improved from 4.6 to 2.4 arcsec and from 12.4 to 2.0 arcsec, respectively. X-ray measurements at 12 keV yielded local half power diameters (HPDs) of approximately 7--17 arcsec and a full-aperture HPD of 8.5 arcsec. The newly fabricated mirror was adopted for the soft X-ray telescope of the fifth Focusing Optics X-ray Solar Imager (FOXSI-5) sounding rocket flight and was successfully flown in May 2026.

astro-ph.IM↗

Development of Electroformed X-ray Optics Bridging Synchrotron Technology and Space Astronomy

We have developed X-ray telescope mirrors using an original electroforming replication technique established through the fabrication of millimeter-aperture, ultra-short-focal-length nanofocusing mirrors for synchrotron X-ray microscopy. This paper presents detailed results of X-ray illumination tests of a 60-mm-diameter, full-circumference, double-reflection monolithic electroformed nickel mirror and its Mirror Module Assembly (MMA). The experiments were conducted at the 1-km beamline BL29XUL at SPring-8. To simulate a parallel X-ray beam from celestial sources, we constructed a dedicated evaluation system, the High-Brilliance X-ray Kilometer-long Large-Area Expanded-beam Evaluation System (HBX-KLAEES). Owing to the high photon flux and the quasi-point-like source with a small divergence provided by HBX-KLAEES, the imaging performance was evaluated with high fidelity, resolving both the sharp core and large-angle components of the Point Spread Function (PSF). The results show an extremely sharp core with a Full Width at Half Maximum (FWHM) of 0.7 arcsec and a Half Power Diameter (HPD) of 14 arcsec, even after integration into the MMA. In addition, a positive correlation was found between angular resolution and axial figure error in both the primary and secondary mirror sections, indicating that axial figure errors contribute to image degradation. Based on these results, the MMA was selected as one of the hard X-ray optics for the FOXSI-4 sounding rocket experiment, which performs high-resolution soft and hard X-ray imaging spectroscopy of solar flares and was successfully launched. These results demonstrate the potential for further improvements in angular resolution and the development of high-resolution, ultra-short focal length X-ray optics for small satellites, including CubeSats.

astro-ph.IM↗