arXiv Science⌕ Search

arXiv subjects

Shuo Ma

Publications and source records attributed to Shuo Ma.

At least 19 recordsLinked to original sources
arXiv2025

Inelastic dilatancy as a mechanism for coseismic fluid depressurization of a shallow fault zone

Hydrologic observations and experimental studies indicate that inelastic dilation from coseismic fault damage can cause substantial pore pressure reduction, yet most near-fault hydromechanical models ignore such inelastic effects. Here, we present a 3-D groundwater flow model incorporating the effects of inelastic dilation based on an earthquake dynamic rupture model with inelastic off fault deformation, both on pore pressure and permeability enhancement. Our results show that inelastic dilation causes mostly notable depressurization within 1 to 2 km off the fault at shallow depths (< 3 km). We found agreement between our model predictions and recent field observations, namely that both sides of the fault can experience large magnitude (~tens of meters) water level drawdowns. For comparison, simulations considering only elastic strain produced smaller water level changes (~several meters) and contrasting signs of water level change on either side of the fault. The models show that inelastic dilation is a mechanism for coseismic fault depressurization at shallow depths. While the inelastic dilation is a localized phenomenon which is most pronounced in the fault zone, the pressure gradients produced in the coseismic phase have a broader effect, increasing fluid migration back into the fault zone in the postseismic phase. We suggest field hydrologic measurements in the very near field (1 to 2 km) of active faults could capture damage-related pore pressure signals produced by inelastic dilation, helping improve our understanding of fault mechanics and groundwater management near active faults.

physics.geo-ph↗
arXiv2025

Listening Between the Frames: Bridging Temporal Gaps in Large Audio-Language Models

Recent Large Audio-Language Models (LALMs) exhibit impressive capabilities in understanding audio content for conversational QA tasks. However, these models struggle to accurately understand timestamps for temporal localization (e.g., Temporal Audio Grounding) and are restricted to short audio perception, leading to constrained capabilities on fine-grained tasks. We identify three key aspects that limit their temporal localization and long audio understanding: (i) timestamp representation, (ii) architecture, and (iii) data. To address this, we introduce TimeAudio, a novel method that empowers LALMs to connect their understanding of audio content with precise temporal perception. Specifically, we incorporate unique temporal markers to improve time-sensitive reasoning and apply an absolute time-aware encoding that explicitly grounds the acoustic features with absolute time information. Moreover, to achieve end-to-end long audio understanding, we introduce a segment-level token merging module to substantially reduce audio token redundancy and enhance the efficiency of information extraction. Due to the lack of suitable datasets and evaluation metrics, we consolidate existing audio datasets into a new dataset focused on temporal tasks and establish a series of metrics to evaluate the fine-grained performance. Evaluations show strong performance across a variety of fine-grained tasks, such as dense captioning, temporal grounding, and timeline speech summarization, demonstrating TimeAudio's robust temporal localization and reasoning capabilities.

cs.SD↗
arXiv2025

XiChen: A global weather observation-to-forecast machine learning system via four-dimensional variational gradient-guided flexible assimilation

Machine Learning (ML) has shown great promise in revolutionizing weather forecasting, yet most ML systems still rely on initial conditions generated by Numerical Weather Prediction (NWP) systems. End-to-end ML models aim to eliminate this dependency, but they often rely on observation-specific encoders and require redesign or retraining when observation sources change, thereby limiting their operational robustness. Here, we introduce XiChen, a global weather observation-to-forecast ML system via four-dimensional variational (4DVar) gradient-guided flexible assimilation. We demonstrate that the gradient of the 4DVar cost function serves as a physically grounded interface that maps heterogeneous observations into a common state space. This novel formulation enables XiChen to flexibly assimilate diverse conventional and raw satellite observations while preserving physical consistency. Experiments show that the system achieves forecasting metrics competitive with operational NWP systems. This work provides a practical and physically consistent route toward operational ML-based global weather forecasting systems with heterogeneous and evolving observations.

cs.LG↗
arXiv2025

Logical qubits with erasure conversion using metastable neutral atoms

Implementing large-scale quantum algorithms with practical advantage will require fault-tolerance achieved through quantum error correction, but the associated overhead is prohibitive. This overhead can be reduced by engineering physical qubits with fewer errors, and by shaping the residual errors to be more easily correctable. In this work, we demonstrate quantum error correcting codes and logical qubit circuits in a metastable ytterbium-171 nuclear spin qubit with a noise bias towards erasure errors. These errors can be located separately from any syndrome information diagnosing the error, and we demonstrate adaptive circuit execution based on erasure information. We show that dephasing errors on the qubit during coherent transport can be strongly suppressed, and implement entangling gates that maintain a high fidelity in the presence of gate beam inhomogeneity or pointing errors. Furthermore, we demonstrate logical qubit encoding in the [[4, 2, 2]] code, with error correction during decoding based on mid-circuit erasure measurements despite the fact that the code is too small to correct any Pauli errors. Finally, we demonstrate logical qubit teleportation between multiple code blocks with conditionally selected ancillas based on mid-circuit erasure checks, a key part of leakage-robust error correction schemes using neutral atoms.

quant-ph↗
arXiv2025

Direct measurement of the 3P0 clock state natural lifetime in 87Sr

Optical lattice clocks based on the narrow (5s2)1S0 - (5s5p)3P0 transition in neutral strontium (Sr) are among the most precise and accurate measurement devices in existence. Although this transition is completely forbidden by selection rules, state mixing from the hyperfine interaction in 87Sr provides a weakly allowed transition that can be coherently driven with practical clock laser intensities. While the coherent interrogation times of optical clocks are typically set by the linewidth of the probe laser, this limitation can be overcome in synchronous differential comparisons between ensembles. In such measurements the natural lifetime of the 1S0-3P0 clock transition becomes the fundamental limiting factor to the duration of a single run of the experiment. However, a direct measurement of the decay rate of the clock excited state is quite challenging due to the competing effects of other loss channels such as Raman scattering, inelastic collisions and atom-loss due to background gas. In this work, we monitor the decay of Sr atoms trapped in an optical lattice and initialized in the 3P0 state. By making measurements of high and low density ensembles of both 87Sr and 88Sr across varying lattice trap depths, we isolate radiative decay, which accounts for a significant fraction of the observed decays at low depths. We obtain a natural radiative decay lifetime of 167(+79/-40) s for the 3P0 clock state in 87Sr, a value that is consistent with previously reported measurements and theoretical predictions. We also introduce an additional measurement scheme that involves repeated measurements of the ground state population within a single experimental sequence, validating our model and the consistency of the measured rates.

physics.atom-ph↗
arXiv2025

Enhancing optical lattice clock coherence times with erasure conversion

Increasing coherent interrogation times is central to advancing the precision of optical clocks. Synchronous differential optical clock comparisons have now demonstrated atomic coherence times that far exceed the coherence time of the clock laser. While atom coherence times are then primarily limited by errors induced by lattice Raman scattering, excited clock state radiative decay, and broadening from two-body collisions, many of these errors take the atoms out of the clock transition subspace, and can therefore be converted into "erasure" errors if the appropriate readout scheme is employed. Here we experimentally demonstrate a hyperfine-resolved readout technique for ${}^{87}$Sr optical lattice clocks that mitigates decoherence from Raman scattering induced by the lattice as well as radiative decay. By employing hyperfine-resolved readout in synchronous differential comparisons between ${}^{87}$Sr ensembles with both Ramsey and spin echo spectroscopy sequences, we achieve enhanced atomic coherence times exceeding 100 s and 150 s, respectively, enabling longer coherent measurements without a reduction in performance. We anticipate that this hyperfine-resolved readout technique will benefit applications of state-of-the-art optical lattice clock comparisons in which the coherence times are constrained by Raman scattering or radiative decay.

physics.atom-ph↗
arXiv2024

Two Channels of Metal-Rich Compact Stellar System Formation: Starbursts under High Ram Pressure versus Tidal Stripping

Most galaxies follow well-defined scaling relations of metallicity and stellar mass; however, some outliers at the low mass end of the observed galaxy population exhibit unusually high metallicity for their mass. Understanding how these objects get to be so metal-rich is vital for understanding the role of feedback in galaxy formation. Using the TNG50 simulation, we explore the origins of this phenomenon. We identify 227 metal-rich, compact stellar systems (CSSs) that deviate significantly from this scaling relation. These CSSs are satellites located in the vicinity of massive host galaxies, with stellar masses ranging from $10^{8} M_{\odot}$ to $10^{10}\ M_{\odot}$ (including six systems that are close analogs of the M31-M32 system). Contrary to the previously assumed scenario that such objects are predominantly products of tidal stripping, our results suggest a more prevalent role for ram pressure in their formation. Indeed, 76% (173) of these CSSs are formed through a burst of star formation occurring around the time of the first pericentric passage, typically at redshifts $z\lesssim1$, aided by strong ram pressure and tidal forces. The high ram pressure, resulting from the CSSs' rapid motion near the halo center, facilitates metal enrichment, producing high-metallicity CSSs by confining the metal-rich gas from bursty star formation, which leads to distinct stellar populations characterized by enhanced metallicity as well as high $\alpha$-abundance. Only the remaining 24% (54) of metal-rich CSSs are generated through the tidal stripping of massive progenitors. Our results further indicate that M32 is more likely to have formed through intense star formation events rather than through gradual, tidal stripping, thereby providing crucial insights into the nature of low mass, compact galaxy formation.

astro-ph.GA↗
arXiv2024

An In-depth Investigation of the Primordial Cluster Pair ASCC 19 and ASCC 21

Utilizing \texttt{Gaia} data from the literature, we report a new young ($\sim$8.9~Myr) cluster pair, ASCC~19 and ASCC~21, located near the Orion star-forming complex. The clusters are separated by a 3D distance of ~27.00~$\pm$~7.51~pc. Both clusters share a common age (Log(age)~=~6.95~$\pm$~0.05), similar radial velocities ($R_{v}$~=~21.34~$\pm$~4.47~km s$^{-1}$ for ASCC~19 and $R_{v}$~=~20.05~$\pm$~3.86~km s$^{-1}$ for ASCC~21), and comparable metallicities ([Fe/H]~=~$-$0.14~$\pm$~0.25~dex for ASCC~19 and [Fe/H]~=~$-$0.12~$\pm$~0.04~dex for ASCC~21, from LAMOST-DR11). These similarities suggest that the clusters likely originated from the fragmentation of the same molecular cloud, forming a primordial cluster pair. Furthermore, the formation of the two clusters is attributed to the coalescence of multiple subclusters, as inferred from the distribution analysis between metal abundances and distances to clusters' centers. Neither cluster shows significant mass segregation. Their members with radial velocities exceeding 100~km s$^{-1}$ are young variables. Additionally, a tidal interaction between the clusters is observed. Comparisons of the Roche radius with tidal radii, and velocity difference with orbital velocity, suggest that the pair is an unbound system, that is, a double cluster. Finally, orbital motion simulations show that the clusters will not merge into a single system.

astro-ph.SR↗
arXiv2024

Spectroscopy and modeling of $^{171}$Yb Rydberg states for high-fidelity two-qubit gates

Highly excited Rydberg states and their interactions play an important role in quantum computing and simulation. These properties can be predicted accurately for alkali atoms with simple Rydberg level structures. However, an extension of these methods to more complex atoms such as alkaline-earth atoms has not been demonstrated or experimentally validated. Here, we present multichannel quantum defect (MQDT) models for highly excited $^{174}$Yb and $^{171}$Yb Rydberg states with $L \leq 2$. The models are developed using a combination of existing literature data and new, high-precision laser and microwave spectroscopy in an atomic beam, and validated by detailed comparison with experimentally measured Stark shifts and magnetic moments. We then use these models to compute interaction potentials between two Yb atoms, and find excellent agreement with direct measurements in an optical tweezer array. From the computed interaction potential, we identify an anomalous F\"orster resonance that likely degraded the fidelity of previous entangling gates in $^{171}$Yb using $F=3/2$ Rydberg states. We then identify a more suitable $F=1/2$ state, and achieve a state-of-the-art controlled-Z gate fidelity of $F=0.994(1)$, with the remaining error fully explained by known sources. This work establishes a solid foundation for the continued development of quantum computing, simulation and entanglement-enhanced metrology with Yb neutral atom arrays.

physics.atom-ph↗
arXiv2023

Generalizable Low-Resource Activity Recognition with Diverse and Discriminative Representation Learning

Human activity recognition (HAR) is a time series classification task that focuses on identifying the motion patterns from human sensor readings. Adequate data is essential but a major bottleneck for training a generalizable HAR model, which assists customization and optimization of online web applications. However, it is costly in time and economy to collect large-scale labeled data in reality, i.e., the low-resource challenge. Meanwhile, data collected from different persons have distribution shifts due to different living habits, body shapes, age groups, etc. The low-resource and distribution shift challenges are detrimental to HAR when applying the trained model to new unseen subjects. In this paper, we propose a novel approach called Diverse and Discriminative representation Learning (DDLearn) for generalizable low-resource HAR. DDLearn simultaneously considers diversity and discrimination learning. With the constructed self-supervised learning task, DDLearn enlarges the data diversity and explores the latent activity properties. Then, we propose a diversity preservation module to preserve the diversity of learned features by enlarging the distribution divergence between the original and augmented domains. Meanwhile, DDLearn also enhances semantic discrimination by learning discriminative representations with supervised contrastive learning. Extensive experiments on three public HAR datasets demonstrate that our method significantly outperforms state-of-art methods by an average accuracy improvement of 9.5% under the low-resource distribution shift scenarios, while being a generic, explainable, and flexible framework. Code is available at: https://github.com/microsoft/robustlearn.

cs.CV↗
arXiv2023

High-fidelity gates with mid-circuit erasure conversion in a metastable neutral atom qubit

The development of scalable, high-fidelity qubits is a key challenge in quantum information science. Neutral atom qubits have progressed rapidly in recent years, demonstrating programmable processors and quantum simulators with scaling to hundreds of atoms. Exploring new atomic species, such as alkaline earth atoms, or combining multiple species can provide new paths to improving coherence, control and scalability. For example, for eventual application in quantum error correction, it is advantageous to realize qubits with structured error models, such as biased Pauli errors or conversion of errors into detectable erasures. In this work, we demonstrate a new neutral atom qubit, using the nuclear spin of a long-lived metastable state in ${}^{171}$Yb. The long coherence time and fast excitation to the Rydberg state allow one- and two-qubit gates with fidelities of 0.9990(1) and 0.980(1), respectively. Importantly, a significant fraction of all gate errors result in decays out of the qubit subspace, to the ground state. By performing fast, mid-circuit detection of these errors, we convert them into erasure errors; during detection, the induced error probability on qubits remaining in the computational space is less than $10^{-5}$. This work establishes metastable ${}^{171}$Yb as a promising platform for realizing fault-tolerant quantum computing.

quant-ph↗
arXiv2023

Cluster aggregates surrounding Pismis 5 in the Vela Molecular Ridge

Context. In the Gaia era, the precision of astrometric data is unprecedented. High-quality data make it easier to find more cluster aggregates and support further confirmation of these open clusters. Aims. We use Gaia DR3 to redetermine the open clusters surrounding Pismis 5 in the Vela Molecular Ridge. We also investigate the basic properties of these clusters. Methods. We apply two clustering algorithms (StarGO and pyUPMASK) to identify the open cluster members in a five-dimensional space with Gaia DR3. Results. We identify eight open clusters surrounding Pismis 5 in the Vela Molecular Ridge. The open cluster QZ 1 is newly discovered. Through investigating the comprehensive properties of the clusters, one open binary cluster candidate (Alessi 43 and Collinder 197) and one triple open cluster candidate (Pismis 5, Pismis 5A, and Pismis 5B) are discussed. Conclusions. Binary and triple open cluster candidates have been identified as potential primordial aggregates based on their similar age, position, and motion. According to kinematic speculations, the two aggregate candidates will gradually separate, and their interiors will slowly disintegrate.

astro-ph.GA↗
arXiv2023

First Detailed Analysis of a Relatively Deep, Low Mass-ratio Contact Binary: ATO J108.6991+27.8306

We present the first detailed photometric analysis of ATO J108.6991+27.8306 (hereinafter as J108). The short-period close binary J108 was observed by the Nanshan 1 m Wide Field Telescope of the Xinjiang Astronomical Observatory. The obtained BVRI-band light curves were used to determine the photometric solution by using the 2003 version of the Wilson-Devinney code. J108 is a typical deep ( f > 50%), low mass ratio (q < 0.25) overcontact binary system with a mass ratio of q = 0.1501 and a fill-out factor of f = 50.1 %, suggesting that it is in the late evolutionary stage of contact binary systems. We found the target to be a W-type W UMa binary and provided evidence for the presence of starspots on both components. From the temperature-luminosity diagram, the main component is the evolved main sequence star with an evolutionary age of about 7.94 Gyr.

astro-ph.SR↗
arXiv2023

Robust Human Motion Forecasting using Transformer-based Model

Comprehending human motion is a fundamental challenge for developing Human-Robot Collaborative applications. Computer vision researchers have addressed this field by only focusing on reducing error in predictions, but not taking into account the requirements to facilitate its implementation in robots. In this paper, we propose a new model based on Transformer that simultaneously deals with the real time 3D human motion forecasting in the short and long term. Our 2-Channel Transformer (2CH-TR) is able to efficiently exploit the spatio-temporal information of a shortly observed sequence (400ms) and generates a competitive accuracy against the current state-of-the-art. 2CH-TR stands out for the efficient performance of the Transformer, being lighter and faster than its competitors. In addition, our model is tested in conditions where the human motion is severely occluded, demonstrating its robustness in reconstructing and predicting 3D human motion in a highly noisy environment. Our experiment results show that the proposed 2CH-TR outperforms the ST-Transformer, which is another state-of-the-art model based on the Transformer, in terms of reconstruction and prediction under the same conditions of input prefix. Our model reduces in 8.89% the mean squared error of ST-Transformer in short-term prediction, and 2.57% in long-term prediction in Human3.6M dataset with 400ms input prefix. Webpage: https://evm7.github.io/2CHTR-page/

cs.CV↗
arXiv2022

Design and control analysis of a deployable clustered hyperbolic paraboloid cable net

This paper presents an analytical and experimental design and deployment control analysis of a hyperbolic paraboloid cable net based on clustering actuation strategies. First, the dynamics and statics for clustered tensegrity structures (CTS) are given. Then, we propose the topology design of the deployable hyperbolic paraboloid cable net. The deployability of the cable net is achieved by using clustered cables. It is shown that the clustered cables significantly reduce the number of actuators required for control. The deployment trajectory and actuation prestress in the cables are designed to ensure the tensions are feasible during the deployment process. Then, we compare the deployment analysis's open-loop and closed-loop control strategies. Finally, a lab-scale model is constructed to validate the actuation laws. We test the static performance and deployment process of the experimental model. Results show that the closed-loop control approach is more stable and smoother than the open-loop one in the deployment process. The approaches developed in this paper can also be used for various deployable tensegrity structures.

eess.SY↗
arXiv2022

Equilibrium and stiffness study of clustered tensegrity structures with the consideration of pulley sizes

This paper presents the equilibrium and stiffness study of clustered tensegrity structures (CTS) considering pulley sizes. We first derive the geometric relationship between clustered strings and pulleys, where the nodal vector is chosen as the generalized coordinate. Then, the equilibrium equations of the clustered tensegrity structure with pulleys based on the Lagrangian method are given. Since the stiffness of a structure is usually weakened when using clustering strings, we formulate the tangent stiffness matrix equations for analysis. It is also shown that as pulley sizes go to zero, the governing equations of the clustered tensegrity system with pulleys yield to the classical clustered tensegrity structure without pulleys, which is consistent with the existing literature. Three examples are demonstrated to validate the given theory. The proposed method allows one to conduct equilibrium, stiffness, and robustness studies of cluster tensegrity structures with pulleys. Nevertheless, the approach developed in this paper is not limited to the tensegrity structures. It can also be applied to a wide range of applications with pulley-rope systems, such as drilling rigs, ocean platform anchors, and cargo cranes.

eess.SY↗
arXiv2021

Universal gate operations on nuclear spin qubits in an optical tweezer array of $^{171}$Yb atoms

Neutral atom arrays are a rapidly developing platform for quantum science. In this work, we demonstrate a universal set of quantum gate operations on a new type of neutral atom qubit: a nuclear spin in an alkaline earth-like atom (AEA), $^{171}$Yb. We present techniques for cooling, trapping and imaging using a newly discovered magic trapping wavelength at $\lambda = 486.78$ nm. We implement qubit initialization, readout, and single-qubit gates, and observe long qubit lifetimes, $T_1 \approx 20$ s and $T^*_2 = 1.24(5)$ s, and a single-qubit operation fidelity $\mathcal{F}_{1Q} = 0.99959(6)$. We also demonstrate two-qubit entangling gates using the Rydberg blockade, as well as coherent control of these gate operations using light shifts on the Yb$^+$ ion core transition at 369 nm. These results are a significant step towards highly coherent quantum gates in AEA tweezer arrays.

quant-ph↗
arXiv2021

Millimeter-sized Dust Grains Appear Surviving the Water-sublimating Temperature in the Inner 10 au of the FU Ori Disk

Previous observations have shown that the $\lesssim$10 au, $\gtrsim$400 K hot inner disk of the archetypal accretion outburst young stellar object, FU Ori, is dominated by viscous heating. To constrain dust properties in this region, we have performed radio observations toward this disk using the Karl G. Jansky Very Large Array (JVLA) in 2020 June-July, September, and November. We also performed complementary optical photometric monitoring observations. We found that the dust thermal emission from the hot inner disk mid-plane of FU Ori has been approximately stationary and the maximum dust grain size is $\gtrsim$1.6 mm in this region. If the hot inner disk of FU Ori which is inward of the 150-170 K water snowline is turbulent (e.g., corresponding to a Sunyaev & Shakura viscous $\alpha_{t}\gtrsim$0.1), or if the actual maximum grain size is still larger than the lower limit we presently constrain, then as suggested by the recent analytical calculations and the laboratory measurements, water-ice free dust grains may be stickier than water-ice coated dust grains in protoplanetary disks. Additionally, we find that the free-free emission and the Johnson B and V bands magnitudes of these binary stars are brightening in 2016-2020. The optical and radio variability might be related to the dynamically evolving protostellar or disk accretion activities. Our results highlight that hot inner disks of outbursting objects are important laboratories for testing models of dust grain growth. Given the active nature of such systems, to robustly diagnose the maximum dust grain sizes, it is important to carry out coordinated multi-wavelength radio observations.

astro-ph.EP↗