arXiv ScienceSearch

arXiv subjects

Shuguang Li

Publications and source records attributed to Shuguang Li.

9 recordsLinked to original sources

If It Moves, Radar Knows: A Physics-Aware Radar Transformer for Class-Agnostic Moving-Object Detection

Detectors trained on closed-set annotations can miss rare moving objects outside the training taxonomy. Automotive radar provides category-independent Doppler motion cues and is less affected by adverse illumination and weather, but sparse, noisy returns hinder class-aware 3D box detection. Surface location and velocity remain useful for motion reasoning and collision avoidance when full box geometry is difficult to recover. We present the Physics-Aware Radar Transformer (PART), a fully sparse radar-only detector that predicts existence confidence, a representative surface point, and 2D ground-plane velocity for each moving-object hypothesis. Doppler-Aware Query Initialization (DAQI) replaces scene-independent learned queries with input-dependent proposals by clustering radar returns in position and velocity, easing query-object assignment in sparse scenes. Physics-Guided Cross-Attention (PGCA) incorporates radial-Doppler consistency and radar cross section (RCS) into query-point association. Uncertainty-aware supervision randomly masks ground-truth objects and assigns soft existence targets to ambiguous radar-supported queries, reducing reliance on exhaustive annotations. With only 1.1 million parameters, PART achieves a class-agnostic average precision (CA-AP) of 0.8827, a mean average surface translation error (mASTE) of 0.3188 m, and a mean average velocity error (mAVE) of 0.8084 m/s on nuScenes. It attains 0.9203 recall on rare and safety-relevant categories excluded from the standard evaluation and remains effective at night, in rain, and under severe occlusion. Inspection of apparent false positives shows that some predictions correspond to moving objects absent from the nuScenes annotations. Code and pretrained model weights will be publicly available at https://github.com/sunyinghao-uestc/PART.

cs.CV

Multi-Mode Pneumatic Artificial Muscles Driven by Hybrid Positive-Negative Pressure

Artificial muscles embody human aspirations for engineering lifelike robotic movements. This paper introduces an architecture for Inflatable Fluid-Driven Origami-Inspired Artificial Muscles (IN-FOAMs). A typical IN-FOAM consists of an inflatable skeleton enclosed within an outer skin, which can be driven using a combination of positive and negative pressures (e.g., compressed air and vacuum). IN-FOAMs are manufactured using low-cost heat-sealable sheet materials through heat-pressing and heat-sealing processes. Thus, they can be ultra-thin when not actuated, making them flexible, lightweight, and portable. The skeleton patterns are programmable, enabling a variety of motions, including contracting, bending, twisting, and rotating, based on specific skeleton designs. We conducted comprehensive experimental, theoretical, and numerical studies to investigate IN-FOAM's basic mechanical behavior and properties. The results show that IN-FOAM's output force and contraction can be tuned through multiple operation modes with the applied hybrid positive-negative pressure. Additionally, we propose multilayer skeleton structures to enhance the contraction ratio further, and we demonstrate a multi-channel skeleton approach that allows the integration of multiple motion modes into a single IN-FOAM. These findings indicate that IN-FOAMs hold great potential for future applications in flexible wearable devices and compact soft robotic systems.

cs.RO

Improved algorithms for single machine serial-batch scheduling to minimize makespan and maximum cost

This paper studies the bicriteria problem of scheduling $n$ jobs on a serial-batch machine to minimize makespan and maximum cost simultaneously. A serial-batch machine can process up to $b$ jobs as a batch, where $b$ is known as the batch capacity. When a new batch starts, a constant setup time is required for the machine. Within each batch, the jobs are processed sequentially, and thus the processing time of a batch equals the sum of the processing times of its jobs. All the jobs in a batch have the same completion time, namely, the completion time of the batch. The main result is an $O(n^3)$-time algorithm which can generate all Pareto optimal points for the bounded model ($b<n$) without precedence relation. The algorithm can be modified to solve the unbounded model ($b\ge n$) with strict precedence relation in $O(n^3)$ time as well. The results improve the previously best known running time of $O(n^4)$ for both the bounded and unbounded models.

cs.DS

WHERE-Bot: a Wheel-less Helical-ring Everting Robot Capable of Omnidirectional Locomotion

Compared to conventional wheeled transportation systems designed for flat surfaces, soft robots exhibit exceptional adaptability to various terrains, enabling stable movement in complex environments. However, due to the risk of collision with obstacles and barriers, most soft robots rely on sensors for navigation in unstructured environments with uncertain boundaries. In this work, we present the WHERE-Bot, a wheel-less everting soft robot capable of omnidirectional locomotion. Our WHERE-Bot can navigate through unstructured environments by leveraging its structural and motion advantages rather than relying on sensors for boundary detection. By configuring a spring toy ``Slinky'' into a loop shape, the WHERE-Bot performs multiple rotational motions: spiral-rotating along the hub circumference, self-rotating around the hub's center, and orbiting around a certain point. The robot's trajectories can be reprogrammed by actively altering its mass distribution. The WHERE-Bot shows significant potential for boundary exploration in unstructured environments.

cs.RO

A Decapod Robot with Rotary Bellows-Enclosed Soft Transmissions

Soft crawling robots exhibit efficient locomotion across various terrains and demonstrate robustness to diverse environmental conditions. Here, we propose a valveless soft-legged robot that integrates a pair of rotary bellows-enclosed soft transmission systems (R-BESTS). The proposed R-BESTS can directly transmit the servo rotation into leg swing motion. A timing belt controls the pair of R-BESTS to maintain synchronous rotation in opposite phases, realizing alternating tripod gaits of walking and turning. We explored several designs to understand the role of a reinforcement skeleton in twisting the R-BESTS' input bellows units. The bending sequences of the robot legs are controlled through structural design for the output bellows units. Finally, we demonstrate untethered locomotion with the soft robotic decapod. Experimental results show that our robot can walk at 1.75 centimeters per second (0.07 body length per second) for 90 min, turn with a 15-centimeter (0.6 BL) radius, carry a payload of 200 g, and adapt to different terrains.

cs.RO

An energy-stable phase-field model for droplet icing simulations

A phase-field model for three-phase flows is established by combining the Navier-Stokes (NS) and the energy equations, with the Allen-Cahn (AC) and Cahn-Hilliard (CH) equations and is demonstrated analytically to satisfy the energy dissipation law. A finite difference scheme is then established to discretize the model and this numerical scheme is proved to be unconditionally stable. Based on this scheme, the droplet icing process with phase changing is numerically simulated and the pointy tip of the icy droplet is obtained and analyzed. The influence of the temperature of the supercooled substrate and the ambient air on the droplet freezing process is studied. The results indicate that the formation of the droplet pointy tip is primarily due to the expansion in the vertical direction during the freezing process. Lower substrate temperatures can accelerate this process. Changes in air temperature have a relatively minor impact on the freezing process, mainly affecting its early stages. Moreover, our results demonstrate that the ice front transitions from an approximately horizontal shape to a concave one. Dedicated physical experiments were conducted and the measured solidification process matches the results of the proposed phase-field method very well.

physics.flu-dyn

Unveiling mussel plaque core ductility: the role of pore distribution and hierarchical structure

The mussel thread-plaque system exhibits strong adhesion and high ductility, allowing it to adhere to various surfaces. While the microstructure of plaques has been thoroughly studied, the effect of their unique porous structure on ductility remains unclear. This study firstly investigated the porous structure of mussel plaque cores using scanning electron microscopy (SEM). Two-dimensional (2D) porous representative volume elements (RVEs) with scaled distribution parameters were generated, and the calibrated phase-field modelling method was applied to analyse the effect of the pore distribution and multi-scale porous structure on the failure mechanism of porous RVEs. The SEM analysis revealed that large-scale pores exhibited a lognormal size distribution and a uniform spatial distribution. Simulations showed that increasing the normalised mean radius value of the large-scale pore distribution can statistically lead to a decreasing trend in ductility, strength and strain energy, but cannot solely determine their values. The interaction between pores can lead to two different failure modes under the same pore distribution: progressive failure mode and sudden failure mode. Additionally, the hierarchical structure of multi-scale porous RVEs can further increase ductility by 40%-60% compared to single-scale porous RVEs by reducing stiffness, highlighting the hierarchical structure could be another key factor contributing to the high ductility. These findings deepen our understanding of how the pore distribution and multi-scale porous structure in mussel plaques contribute to their high ductility and affect other mechanical properties, providing valuable insights for the future design of highly ductile biomimetic materials.

physics.app-ph

Design and Fabrication of String-driven Origami Robots

Origami designs and structures have been widely used in many fields, such as morphing structures, robotics, and metamaterials. However, the design and fabrication of origami structures rely on human experiences and skills, which are both time and labor-consuming. In this paper, we present a rapid design and fabrication method for string-driven origami structures and robots. We developed an origami design software to generate desired crease patterns based on analytical models and Evolution Strategies (ES). Additionally, the software can automatically produce 3D models of origami designs. We then used a dual-material 3D printer to fabricate those wrapping-based origami structures with the required mechanical properties. We utilized Twisted String Actuators (TSAs) to fold the target 3D structures from flat plates. To demonstrate the capability of these techniques, we built and tested an origami crawling robot and an origami robotic arm using 3D-printed origami structures driven by TSAs.

cs.RO

Efficient algorithms for scheduling equal-length jobs with processing set restrictions on uniform parallel batch machines

We consider the problem of scheduling jobs with equal lengths on uniform parallel batch machines with non-identical capacities where each job can only be processed on a specified subset of machines called its processing set. For the case of equal release times, we give efficient exact algorithms for various objective functions. For the case of unequal release times, we give efficient exact algorithms for minimizing makespan.

cs.DS