arXiv subjects

Shubham Saxena

Publications and source records attributed to Shubham Saxena.

6 recordsLinked to original sources

arXiv2026

Data-Aided Bayesian Learning for CSI Estimation over Doubly-Selective DCO-OTFS MIMO VLC Channels with Affine-Precoded Superimposed Training Sequences

An orthogonal affine-precoded superimposed training sequence (AP-STS)-based framework is conceived for cyclic prefix (CP)-assisted multiple-input multiple-output (MIMO) direct-current-biased orthogonal time frequency space (DCOOTFS) visible light communication (VLC) links using arbitrary transmit-receive pulse shaping for transmission over doubly selective channels. For each light-emitting diode (LED), the pilot and data matrices are jointly affine-precoded and overlaid in the delay-Doppler (DD)-domain. Then, a unified end-to-end DD-domain input-output relationship is derived. At each photodiode (PD), orthogonal precoders are utilized to separate the pilot and data components, thereby suppressing mutual interference. Building on this model, an expectation-maximization (EM)-driven DD-domain pilot-aided Bayesian learning (DD-PBL) scheme is developed to estimate the channel state information (CSI). A DD-domain data-aided Bayesian learning (DD-DBL) procedure is then proposed for jointly refining the CSI and detecting data by exploiting the detected symbols as virtual pilots in the spirit of decision-directed channel estimation. The linear minimum mean square error (LMMSE) detector harnessed explicitly accounts for CSI uncertainty due to realistic estimation errors. In addition, Bayesian Cramer-Rao lower bounds (BCRLBs) are derived for the MIMO DCO-OTFS VLC setting considered. Numerical results confirm improved normalized mean-square-error (NMSE), reduced pilot overhead, and mitigated symbol error-rate (SER) relative to recent benchmarks.

eess.SP↗

arXiv2026

Sparse Channel Estimation and Signal Recovery for Reduced-PAPR Visible Light Optical OFDM Systems Relying on Bayesian Learning

A multipath CIR estimator is proposed, followed by sparse frequency-domain (FD) signal detection, which harnesses the simultaneous-sparsity innate in the multipath CIR and FD signals across measurement vectors, conceived for optical OFDM (O-OFDM) utilized for visible light communication (VLC) systems having reduced peak-to-average power ratio. At the outset, we derive the input-output relationships for the asymmetrically clipped O-OFDM (ACO-OFDM) as well as for the direct current-biased O-OFDM (DCO-OFDM) systems. Next, traditional benchmarking methods are introduced for channel estimation (CE), including both the LMMSE and LS methods, followed by an orthogonal matching pursuit (OMP)-based technique capable of exploiting sparsity in the multipath CIR of the VLC system. Subsequently, an CE technique based on a novel group sparse OMP (GOMP) concept is proposed, which capitalizes on the group-sparsity in the delay domain of the CIR across measurement vectors, attributed to the multipath characteristics inherent in the NLoS components of the VLC channel model. Additionally, an advanced group-sparse CE technique is put forth based on the group-sparse Bayesian learning (GBL) approach, which considerably reduces the pilot overhead. A low complexity version of GBL, termed LCGBL, is also developed that reduces the computational cost of GBL significantly. Consequently, the GOMP and GBL frameworks are also extended to the data detection of the sparse FD O-OFDM symbols, which utilizes the group-sparsity of the FD O-OFDM symbols across measurement vectors. The Bayesian Cramer-Rao lower bound (BCRLB) is computed to assess the estimation performance of the proposed CE techniques. Our simulations demonstrate that, despite its reduced pilot overhead, the proposed GBL technique outperforms the other CE schemes in terms of its BER, outage probability, and NMSE, quantitatively reinforcing its superiority.

eess.SP↗

arXiv2026

Statistical Inference-Based Channel Estimation for LD-Driven Visible Light O-OFDM Systems in the Presence of Relative Intensity and Input-Signal-Dependent Shot Noise

Laser diode (LD)-based luminaires are gaining increasing attention in automotive applications and are expected to extend to residential and commercial environments, creating opportunities for high-bandwidth visible light communication (VLC) systems. However, practical LD-based VLC links are impaired by input-signal-dependent shot noise (ISDSN), relative intensity noise (RIN), and thermal noise, which affect reliable channel estimation (CE). This work investigates their joint impact on receiver-side CE in a single-input single-output (SISO) optical orthogonal frequency division multiplexing (OOFDM) VLC system under a statistically random channel model. A statistical inference framework is developed in which the receiver exploits observed signal variations to estimate the channel under optical impairments. Closed-form expressions are derived for least squares (LS), maximum likelihood (ML), maximum a posteriori probability (MAP), minimum mean square error (MMSE), and linear MMSE (LMMSE) estimators. In addition, the Bayesian Cramer-Rao lower bound (BCRLB) is derived to benchmark mean square error (MSE) performance. Monte Carlo simulations for direct current-biased O-OFDM (DCO-OFDM) and asymmetrically clipped O-OFDM (ACO-OFDM) validate the analysis. Results show substantial CE degradation under the joint presence of ISDSN and RIN, while the MMSE estimator consistently achieves the lowest MSE, demonstrating strong potential for robust and adaptive receiver operation in practical VLC systems.

eess.SP↗

arXiv2026

Data-Aided Variational Bayesian Inference for CSI Estimation over Doubly-Selective DCO-OTFS MIMO VLC Systems with Affine-Precoded Superimposed Training Sequences

An orthogonal affine-precoded superimposed training sequences (AP-STS)-based architecture is developed for the cyclic prefix (CP)-aided multiple input multiple output (MIMO) direct-current-biased orthogonal time frequency space (DCO-OTFS) visible light communication (VLC) systems relying on arbitrary transmitter-receiver pulse shaping. The data and pilot symbol matrices are affine-precoded (AP) and superimposed in the delay-Doppler (DD)-domain for each transmit light-emitting diode (LED), followed by the development of an end-to-end DD-domain relationship for the input-output symbols. At the receiver for each receiver photodiode (PD), the decoupled pilot and data symbol are extracted by employing orthogonal precoder matrices, which eliminates the mutual interference. Furthermore, a novel pilot-aided (PA) variational Bayesian inference (PA-VBI) technique is conceived for the channel state information (CSI) estimation of MIMO DCO-OTFS VLC systems based on the expectation-maximization (EM) technique. Subsequently, a data-aided (DA) variational Bayesian inference (DA-VBI)-based joint CSI estimation and data detection technique is proposed, which beneficially harnesses the estimated data symbols for improved CSI estimation. Moreover, the Bayesian Cramer-Rao lower bounds (BCRLBs) are also derived for MIMO DCO-OTFS VLC systems. Finally, simulation results demonstrate that the proposed method yields superior performance in terms of normalized mean-square-error (NMSE), pilot overhead, and symbol error-rate (SER).

eess.SP↗

arXiv2026

Water immersion single-mirror schlieren imaging system for flow visualization

Schlieren imaging is a popular optical technique for visualizing flow in transparent media. In-water high-sensitivity flow visualization, using schlieren imaging, is usually performed with a large-footprint two-mirror z-configuration. Here, we present a small footprint, easy-to-implement, single-mirror schlieren imaging system for in-water flow visualization. The same system is capable of high-sensitivity flow visualization in air as well. At its core, our system uses a concave mirror with water immersion. We present theoretical analysis and experimental results to show that this water immersion helps reduce the system's footprint by 25%. Our water immersion-based single-mirror schlieren imaging method additionally reduces mirror surface artifacts, increasing the sensitivity of flow visualization. This technique enables a low-cost schlieren system, as demonstrated experimentally using an inexpensive concave mirror. We also provide the experimental validation of high sensitivity in-water flow visualization for some transparent chemicals or solutions.

physics.flu-dyn↗

arXiv2025

Advanced Knife-Edge free Self-Aligned Colour Schlieren Imaging with Extended Measuring Range

Schlieren imaging is a powerful, non-intrusive method widely used to visualize refractive index gradients in fluid dynamics and heat transfer studies, essential in fields like aerospace engineering, combustion analysis, and supersonic flow visualization. Traditional Schlieren imaging setups employ a knife-edge cut-off to differentiate between deviated and non-deviated light rays, creating contrast. However, this approach requires highly precise alignment and limits both usability and measurement range, restricting accurate observation of high-gradient phenomena such as combustion processes at elevated temperatures. Here, we proposed a simplified Schlieren imaging method that eliminates the knife edge by introducing a novel integration of an extended RGB segmented colour source with a circular aperture. Our approach significantly simplifies alignment, enables colour visualization, and we achieve expanded measuring range by approximately threefold. Experimental validation, involving imaging hot air plumes generated from butane combustion and transparent adhesive tape tests, demonstrate significant improved performance, including enhanced visibility near regions of high temperature gradients, improved edge detection, and precise visualization of large refractive gradients. This simplified yet robust Schlieren imaging approach substantially broadens the scope and ease of application, facilitating detailed investigations of previously challenging fluid phenomena.

physics.optics↗