arXiv subjects

Shoumik Debnath

Publications and source records attributed to Shoumik Debnath.

7 recordsLinked to original sources

arXiv2026

Inverse Design Validated Optimization of Lead-Free Cs$_3$Cu$_2$Cl$_5$ Visible-Light Microring Resonators Using a Coupled DFT-FDTD Framework

Microring resonators are indispensable for wavelength filtering, sensing, and on-chip signal routing in photonic integrated circuits, yet visible-wavelength implementations using environmentally benign materials remain scarce. We report a numerical design study of add-drop MRRs employing cesium copper chloride (Cs$_3$Cu$_2$Cl$_5$), a lead-free all-inorganic halide with favorable visible-band optical properties. Wavelength-resolved refractive index ($n$) and extinction coefficient ($k$) of Cs$_3$Cu$_2$Cl$_5$, computed via density functional theory (DFT), serve as direct input to finite-difference time-domain (FDTD) modeling: 2.5D variational FDTD (varFDTD) for the parametric sweeps, and full three-dimensional FDTD for validation of the selected geometry. Independent parametric scans cover ring waveguide width (500--900~nm), coupling gap (150--300~nm), and bend radius (5--20~$μ$m). At the balanced operating point of 600~nm ring width, 200~nm gap, and 10~$μ$m radius, we obtain a loaded quality factor ($Q$) of ${\sim}5{,}386$, a free spectral range (FSR) of 11.3~nm, a drop-port extinction ratio (ER) of 32.2~dB, and a finesse of 95.8. The gap sweep traces the full trajectory from over-coupled through critically coupled to under-coupled operation, with the critical point near 200~nm. A sharp bending-loss cliff emerges between 5 and 10~$μ$m, below which all figures of merit collapse. These sweeps yield a systematic geometry--performance map for Cs$_3$Cu$_2$Cl$_5$-based MRRs, the first reported for this compound to our knowledge. Cross-platform validation in Tidy3D reproduces the spectral fingerprint of the optimized device, and inverse design of the bus coupling region delivers a 3\% gain in drop-port power transfer, indicating that the sweep-derived geometry sits close to the coupling optimum.

physics.optics↗

arXiv2026

van der Waals Nanogap Loading of a \ce{TiO2} Nanobar Metasurface for Dual-Channel Fano Refractive Index Sensing

Filling the gap of a \ce{TiO2} nanobar-pair metasurface with $α$-\ce{MoO3}, a biaxial orthorhombic crystal, produces two high-$Q$ Fano resonances with unequal quality factors: $Q_\mathrm{TE} = 87$ at 863.3~nm and $Q_\mathrm{TM} = 31$ at 960.1~nm, separated by 97~nm. The same device with amorphous \ce{Sb2S3}, which is isotropic, gives $Q_\mathrm{TE}=66$ and $Q_\mathrm{TM}=20$, a ratio of 3.35 against 2.85 for $α$-\ce{MoO3}, so the inequality of the two quality factors is not specific to the biaxial crystal and originates instead in the in-plane anisotropy of the resonator geometry. An unequal pair of quality factors is therefore not by itself evidence of material anisotropy. What the biaxial fill controls at fixed geometry is the partitioning of the response between the two channels: each polarization samples a different principal index, so the two resonance positions, the two linewidths and the ratio of the two sensitivities respond to a single material choice in different proportions. The TE channel delivers sensitivity $S=155.3$~nm~RIU$^{-1}$, figure of merit $15.71$~RIU$^{-1}$, and an ideal refractive index resolution of $6.44\times10^{-5}$~RIU; TM delivers $S=139.1$~nm~RIU$^{-1}$, $4.44$~RIU$^{-1}$, and $7.19\times10^{-5}$~RIU. Simultaneous readout produces a fixed polarization response with isotropic slope 0.896, which the gap material changes: the same geometry filled with amorphous \ce{Sb2S3} gives 0.620. All results reported here are numerical; no device was fabricated and no measurement was performed.

physics.optics↗

arXiv2026

Polarization-Multiplexed Spatial Filtering in a Symmetric \ce{TiO2} Metasurface with an Anisotropic van der Waals Gap Fill

Finite-difference time-domain simulations of a symmetric \ce{TiO2} nanobar-pair metasurface with a 60~nm $α$-\ce{MoO3} gap fill give two Fano resonances that are selected by the input polarization angle, at 885.5~nm ($Q=50.5$) and 893.8~nm ($Q=44.8$). Both channels act as spatial high-pass filters and differ in their cutoff spatial frequency, 0.44 and 1.17~$μ$m$^{-1}$, with the broader cutoff belonging to the lower-$Q$ resonance. The unit cell retains a mirror plane normal to the swept direction, so the momentum-space transfer function is even in $k_x$; over the accessible momentum range the broader channel follows $|H|\propto|k_x|$, which is the kernel used for edge enhancement. Both operations are applied to a USAF~1951 resolution chart in a simulated 4$f$ arrangement. The simulations use measured anisotropic optical constants for $α$-\ce{MoO3} with the crystal axes assigned as they lie in an exfoliated flake. A control series with isotropic and uniaxial gap fillings indicates that the shape anisotropy of the bar pair sets the scale of the channel separation, that the anisotropy of the crystal acts mainly through its out-of-plane index contrast, and that the in-plane birefringence contributes a small part of it.

physics.optics↗

arXiv2026

Polarization-Selective Near-Perfect Absorption via Mie-Type Resonance in van der Waals Anisotropic ReS$_2$/$α$-MoO$_3$/Au Heterostructure

We investigate polarization-selective absorption in a visible-wavelength heterostructure consisting of a ReS$_2$ stripe grating, an $α$-MoO$_3$ spacer, and an Au back-reflector using finite-difference time-domain simulations. For an optimized geometry with a grating period of 500 nm, stripe width of 250 nm, and ReS$_2$ thickness of 80 nm, the structure exhibits near-unity absorption of 99.99\% at 650.5 nm under TE-polarized illumination. The resonant field is concentrated near the outer edges of the ReS$_2$ stripe, while absorption power density is localized in the same region, consistent with a localized edge mode. The absorption response depends strongly on polarization, producing a TE--TM resonance separation of 16.2 nm. Replacing either the biaxial ReS$_2$ layer or the anisotropic $α$-MoO$_3$ spacer with isotropic equivalents substantially modifies the spectral response and reduces the polarization-dependent wavelength separation. In addition, rotating the crystal orientation of the ReS$_2$/$α$-MoO$_3$ stack shifts both the resonance wavelength and peak absorption without changing the device geometry. The results show that the combination of anisotropic resonator and spacer layers provides an effective means of controlling resonant absorption and polarization selectivity in van der Waals photonic structures.

physics.optics↗

arXiv2026

An Integrated DFT-FDTD Design of Plasmon-Enhanced Lead-Free $CsSn$$_x$$Ge$$_{1-x}$$I$$_3$ Perovskite LEDs

CsSn$_x$Ge$_{1-x}$I$_3$ as lead-free perovskites are promising for next generation NIR emitting perovskite LEDs due to their tunable bandgaps and stability. However, they suffer from poor light extraction efficiency, and accurate composition-specific optical data for these materials remain scarce. This study presents a DFT-FDTD framework to optimize light extraction via compositional tuning and plasmonic enhancement. First, DFT calculations were performed to obtain composition-specific complex refractive index and extinction coefficient values for $x = 0, 0.25, 0.5, 0.75$, and $1$. Results show bandgap increased from 1.331 eV for CsSnI$_3$ to 1.927 eV for CsGeI$_3$ with increasing Ge content, while refractive index ranges from 2.2 to 2.6 across compositions. These optical constants were then used as inputs for FDTD simulations of a PeLED structure with optimized Au/SiO$_2$ core-shell nanorods for plasmonic enhancement. A 12.1-fold Purcell enhancement was achieved for CsSn$_{0.25}$Ge$_{0.75}$I$_3$, while light extraction efficiency reached 25% for CsSn$_{0.5}$Ge$_{0.5}$I$_3$. LEE enhancement of 36% was obtained for CsSnI$_3$, and spectral overlap between emitter and plasmon resonance reached 96% for Sn-rich compositions. Design guidelines indicate CsSn$_{0.5}$Ge$_{0.5}$I$_3$ offers optimal balance of extraction efficiency (25%), Purcell enhancement (5.3$\times$), spectral overlap (93%), and oxidation stability for wearable and flexible optoelectronic applications, while CsSn$_{0.25}$Ge$_{0.75}$I$_3$ is recommended for applications prioritizing spontaneous emission rate.

physics.optics↗

arXiv2026

Single-Device VOC Fingerprinting via Polarization-Selective Anisotropic BeS-Clad Silicon Microring Resonator

A silicon microring resonator with an anisotropic beryllium sulfide (BeS) cladding is proposed for polarization-selective detection of exhaled-breath volatile organic compound biomarkers. The anisotropic dielectric response of BeS enables the transverse-electric (TE) and transverse-magnetic (TM) modes to probe orthogonal components of the cladding permittivity tensor, generating two independent optical observables from a single device. Five clinically relevant biomarkers are investigated: acetone, isoprene, 4-hydroxyhexenal, 2-propenal, and benzene. First-principles optical constants are incorporated into three-dimensional finite-difference time-domain simulations to evaluate the sensing response. The TE mode exhibits a uniform resonance shift of 0.263 nm across all analytes and serves as a concentration reference channel, while the TM mode produces analyte-specific shifts ranging from 0.200 to 0.426 nm. A unique TM amplitude inversion is observed for benzene, enabling additional discrimination. The resulting dual-polarization response forms a two-dimensional optical fingerprint that distinguishes all five biomarkers without requiring a sensor array or multiple functionalized resonators. The device achieves quality factors of 4520 and 3151 for the TE and TM modes, respectively, with sensitivities up to 6.5 nm/RIU, figures of merit up to 14.9 RIU^-1, and detection limits as low as 1.5 mRIU. Cross-sensitivity analysis further shows that CO2 and H2O produce negative TM resonance shifts, separating interferents from target biomarkers in the fingerprint plane. The proposed platform demonstrates a compact route toward array-free photonic breath analysis using intrinsic cladding anisotropy.

physics.optics↗

arXiv2026

Composition-Dependent Plasmon-Enhanced Emission in Lead-Free Cs$_3$Cu$_2$X$_5$ Halides: A DFT--FDTD Study

Lead-free Cs$_3$Cu$_2$X$_5$ (X = Cl, Br, I) halides exhibit high photoluminescence quantum yields and excellent ambient stability, yet light-emitting devices based on these materials remain limited by poor optical outcoupling. In this work, we develop an integrated density functional theory (DFT) and finite-difference time-domain (FDTD) framework to establish quantitative links between halide composition, wavelength-dependent optical constants, and plasmonic enhancement. First-principles calculations are used to obtain composition-specific refractive index (n) and extinction coefficient (k) spectra, which are directly implemented into three-dimensional FDTD simulations of a complete PeLED stack incorporating Ag/SiO$_2$ core--shell nanostructures. Among the investigated compositions, Cs$_3$Cu$_2$Cl$_5$ demonstrates the strongest plasmonic response, achieving a 4.4$\times$ Purcell enhancement and 30\% light extraction efficiency (LEE) using optimized nanorods. The superior performance originates from its lower refractive index, which reduces dielectric screening and improves near-field coupling. Cs$_3$Cu$_2$Br$_5$ exhibits the highest spectral overlap ($J_{\mathrm{cos}} = 0.955$) but yields moderate extraction (26%) due to increased optical confinement. Cs$_3$Cu$_2$I$_5$ requires a nanosphere geometry and shows limited enhancement, with LEE restricted to 10%. Distance-ependent analysis reveals composition-specific optimal emitter--plasmon separations, ranging from 8--12 nm for Cs$_3$Cu$_2$Br$_5$ to approximately 15 nm for Cs$_3$Cu$_2$Cl$_5$. These results provide composition-dependent design guidelines for plasmon-enhanced lead-free PeLEDs and highlight the critical role of accurate optical constants in predictive device optimization.

physics.optics↗