arXiv subjects

Shinji Yuasa

Publications and source records attributed to Shinji Yuasa.

At least 19 recordsLinked to original sources

arXiv2025

Cryogenic-temperature Grain-to-grain Epitaxial Growth of High-quality Ultrathin CoFe Layer on MgO Tunnel Barrier for High-performance Magnetic Tunnel Junctions

One candidate for ultimate non-volatile memory with ultralow power consumption is magneto-resistive random-access memory (VC-MRAM). To develop VC-MRAM, it is important to fabricate high-performance magnetic tunnel junctions (MTJs), which require the epitaxial growth of an ultrathin ferromagnetic electrode on a crystalline tunnel barrier using a mass-manufacturing-compatible process. In this study, the grain-to-grain epitaxial growth of perpendicularly magnetized CoFe ultrathin films on polycrystalline MgO (001) was demonstrated using cryogenic-temperature sputtering on 300 mm Si wafers. Cryogenic-temperature sputtering at 100 K suppressed the island-like initial growth of CoFe on MgO without hampering epitaxy. Sub-nanometer-thick CoFe layers exhibited remarkable perpendicular magnetic anisotropy (PMA). An even larger PMA was obtained using an Fe-doped MgO (MgFeO) tunnel barrier owing to improved uniformity of the CoFe layer. A 0.8-nm-thick CoFe layer grown on MgFeO exhibited a magnetic damping constant as low as 0.008. The ultralow magnetic damping enables voltage-driven magnetization switching with a low write-error rate (WER) below 10^-6 at a pulse duration of 0.3 ns, and WER on the order of 10^-3 even for a relatively long pulse duration of 1.5 ns. These properties achieved using a mass-manufacturing deposition process can promote the development of VC-MRAM and other advanced spintronic devices based on MTJs.

cond-mat.mtrl-sci↗

arXiv2024

Coherent Driving of a Single Nitrogen Vacancy Center by a Resonant Magnetic Tunnel Junction

Nitrogen-vacancy (NV) centers, atomic spin defects in diamond, represent an active contender for advancing transformative quantum information science (QIS) and innovations. One of the major challenges for designing NV-based hybrid systems for QIS applications results from the difficulty of realizing local control of individual NV spin qubits in a scalable and energyefficient way. To address this bottleneck, we introduce magnetic tunnel junction (MTJ) devices to establish coherent driving of an NV center by a resonant MTJ with voltage controlled magnetic anisotropy. We show that the oscillating magnetic stray field produced by a resonant micromagnet can be utilized to effectively modify and drive NV spin rotations when the NV frequency matches the corresponding resonance conditions of the MTJ. Our results present a new pathway to achieve all-electric control of an NV spin qubit with reduced power consumption and improved solid-state scalability for implementing cutting-edge QIS technological applications.

cond-mat.mes-hall↗

arXiv2024

Magnetization dynamics driven by displacement currents across a magnetic tunnel junction

Understanding the high-frequency transport characteristics of magnetic tunnel junctions (MTJs) is crucial for the development of fast-operating spintronics memories and radio frequency devices. Here, we present the study of frequency-dependent capacitive current effect in CoFeB/MgO-based MTJs and its influence on magnetization dynamics using time-resolved magneto-optical Kerr effect technique. In our device operating at gigahertz frequencies, we find a large displacement current of the order of mA's, which does not break the tunnel barrier of the MTJ. Importantly, this current generates an Oersted field and spin-orbit torque, inducing magnetization dynamics. Our discovery holds promise for building robust MTJ devices operating under high current conditions, also highlighting the significance of capacitive impedance in high frequency magnetotransport techniques.

cond-mat.mes-hall↗

arXiv2023

Interfacial Fe segregation and its influence on magnetic properties of CoFeB/MgFeO multilayers

We investigated the effect of Fe segregated from partially Fe-substituted MgO (MgFeO) on the magnetic properties of CoFeB/MgFeO multilayers. X-ray photoelectron spectroscopy (XPS) as well as magnetic measurements revealed that the segregated Fe was reduced to metal and exhibited ferromagnetism at the CoFeB/MgFeO interface. The CoFeB/MgFeO multilayer showed more than 2-fold enhancement in perpendicular magnetic anisotropy (PMA) energy density compared with a standard CoFeB/MgO multilayer. The PMA energy density was further enhanced by inserting an ultrathin MgO layer in between CoFeB and MgFeO layers. Ferromagnetic resonance measurement also revealed a remarkable reduction of magnetic damping in the CoFeB/MgFeO multilayers.

cond-mat.mes-hall↗

arXiv2023

Towards mutual synchronization of serially connected Spin Torque Oscillators based on magnetic tunnel junctions

Multiple neuromorphic applications require the tuning of two or more devices to a common signal. Various types of neuromorphic computation can be realized using spintronic oscillators, where the DC current induces magnetization precession, which turns into an AC voltage generator. However, in spintronics, synchronization of two oscillators using a DC signal is still a challenging problem because it requires a certain degree of similarity between devices that are to be synchronized, which may be difficult to achieve due to device parameter distribution during the fabrication process. In this work, we present experimental results on the mechanisms of synchronization of spin-torque oscillators. Devices are based on magnetic tunnel junction with a perpendicularly magnetized free layer and take advantage of a uniform magnetization precision in the presence of the magnetic field and a DC bias. By using an external microwave source, we show the optimal condition for the synchronization of the magnetic tunnel junctions. Finally, we present results on the in-series connection of two junctions and discuss the possible path towards improving oscillation power and linewidth. In addition, using numerical simulations of the coupled oscillators model, we aim to reproduce the conditions of the experiments and determine the tolerance for achieving synchronization.

physics.app-ph↗

arXiv2023

Cryogenic temperature deposition of high-performance CoFeB/MgO/CoFeB magnetic tunnel junctions on 300 mm wafers

We developed a cryogenic temperature deposition process for high-performance CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJs) on 300 mm thermally oxidized silicon wafers. The effect of the deposition temperature of the CoFeB layers on the nanostructure, magnetic and magneto-transport properties of the MTJs were investigated in detail. When CoFeB was deposited at 100 K, the MTJs exhibited a perpendicular magnetic anisotropy (PMA) of 214 uJ/m2 and a voltage-controlled magnetic anisotropy (VCMA) coefficient of -45 fJ/Vm, corresponding to 1.4- and 1.7-fold enhancements in PMA and VCMA, respectively, compared to the case of room-temperature deposition of CoFeB. The improvement in the MTJ properties was not simply due to the morphology of the MTJ films. The interface-sensitive magneto-transport properties indicated that interfacial qualities such as intermixing and oxidation states at the MgO/CoFeB interfaces were improved by the cryogenic temperature deposition. Cryogenic-temperature sputtering deposition is expected to be a standard manufacturing process for next-generation magnetoresistive random-access memory.

cond-mat.mes-hall↗

arXiv2022

Heavily Damped Precessional Switching with Very Low Write-error Rate in Elliptical-cylinder Magnetic Tunnel Junction

Voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a writing technique for voltage-controlled magnetoresistive random access memory (VCMRAM), which is expected to be an ultimate non-volatile memory with ultra-low power consumption. In conventional dynamic switching, the width of sub-nanosecond write voltage pulses must be precisely controlled to achieve a sufficiently low write-error rate (WER). This very narrow tolerance of pulse width is the biggest technical difficulty in developing VCMRAM. Heavily damped precessional switching is a writing scheme for VCMRAM with a substantially high tolerance of pulse width although the minimum WER has been much higher than that of conventional dynamic switching with an optimum pulse width. In this study, we theoretically investigate the effect of MTJ shape and the direction of the applied magnetic field on the WER of heavily damped precessional switching. The results show that the WER in elliptical-cylinder MTJ can be several orders of magnitude smaller than that in usual circular-cylinder MTJ when the external magnetic field is applied parallel to the minor axis of the ellipse. The reduction in WER is due to the fact that the demagnetization field narrows the component of the magnetization distribution perpendicular to the plane direction immediately before the voltage is applied.

cond-mat.mes-hall↗

arXiv2022

The origin of enhanced interfacial perpendicular magnetic anisotropy in LiF-inserted Fe/MgO interface

The Fe/MgO interface is an essential ingredient in spintronics as it shows giant tunneling magnetoresistance and strong perpendicular magnetic anisotropy (PMA). A recent study demonstrated that the insertion of an ultra-thin LiF layer between the Fe and MgO layers enhances PMA significantly. In this study, we perform x-ray magnetic circular dichroism measurements on Fe/LiF/MgO multilayers to reveal the origin of the PMA enhancement. We find that the LiF insertion increases the orbital-magnetic-moment anisotropy and thus the magnetic anisotropy energy. We attribute the origin of this orbital-magnetic-moment-anisotropy enhancement to the stronger electron localization and electron-electron correlation or the better interface quality with fewer defects.

cond-mat.mtrl-sci↗

arXiv2022

Electric-Field-Induced Coherent Control of Nitrogen Vacancy Centers

Enabling scalable and energy-efficient control of spin defects in solid-state media is desirable for realizing transformative quantum information technologies. Exploiting voltage-controlled magnetic anisotropy, we report coherent manipulation of nitrogen-vacancy (NV) centers by the spatially confined magnetic stray fields produced by a proximate resonant magnetic tunnel junction (MTJ). Remarkably, the coherent coupling between NV centers and the MTJ can be systematically controlled by a DC bias voltage, allowing for appreciable electrical tunability in the presented hybrid system. In comparison with current state-of-the-art techniques, the demonstrated NV-based quantum operational platform exhibits significant advantages in scalability, device compatibility, and energy-efficiency, further expanding the role of NV centers in a broad range of quantum computing, sensing, and communications applications.

cond-mat.mes-hall↗

arXiv2020

Spin-torque Dynamics for Noise Reduction in Vortex-based Sensors

Performance of magnetoresistive sensors is today mainly limited by their 1/f low-frequency noise. Here, we study this noise component in vortex-based TMR sensors. We compare the noise level in different magnetization configurations of the device, i.e vortex state or uniform parallel or antiparallel states. We find that the vortex state is at least an order of magnitude noisier than the uniform states. Nevertheless, by activating the spin-transfer induced dynamics of the vortex configuration, we observe a reduction of the 1/f noise, close to the values measured in the AP state, as the vortex core has a lower probability of pinning into defect sites. Additionally, by driving the dynamics of the vortex core by a non-resonant rf field or current we demonstrate that the 1/f noise can be further decreased. The ability to reduce the 1/f low-frequency noise in vortex-based devices by leveraging their spin-transfer dynamics thus enhances their applicability in the magnetic sensors' landscape.

cond-mat.mes-hall↗

arXiv2020

Influence of flicker noise and nonlinearity on the frequency spectrum of spin torque nano-oscillators

The correlation of phase fluctuations in any type of oscillator fundamentally defines its spectral shape. However, in nonlinear oscillators, such as spin torque nano oscillators, the frequency spectrum can become particularly complex. This is specifically true when not only considering thermal but also colored $1/f$ flicker noise processes, which are crucial in the context of the oscillator's long term stability. In this study, we address the frequency spectrum of spin torque oscillators in the regime of large-amplitude steady oscillations experimentally and as well theoretically. We particularly take both thermal and flicker noise into account. We perform a series of measurements of the phase noise and the spectrum on spin torque vortex oscillators, notably varying the measurement time duration. Furthermore, we develop the modelling of thermal and flicker noise in Thiele equation based simulations. We also derive the complete phase variance in the framework of the nonlinear auto-oscillator theory and deduce the actual frequency spectrum. We investigate its dependence on the measurement time duration and compare with the experimental results. Long term stability is important in several of the recent applicative developments of spin torque oscillators. This study brings some insights on how to better address this issue.

cond-mat.mes-hall↗

arXiv2020

Binding events through the mutual synchronization of spintronic nano-neurons

The brain naturally binds events from different sources in unique concepts. It is hypothesized that this process occurs through the transient mutual synchronization of neurons located in different regions of the brain when the stimulus is presented. This mechanism of binding through synchronization can be directly implemented in neural networks composed of coupled oscillators. To do so, the oscillators must be able to mutually synchronize for the range of inputs corresponding to a single class, and otherwise remain desynchronized. Here we show that the outstanding ability of spintronic nano-oscillators to mutually synchronize and the possibility to precisely control the occurrence of mutual synchronization by tuning the oscillator frequencies over wide ranges allows pattern recognition. We demonstrate experimentally on a simple task that three spintronic nano-oscillators can bind consecutive events and thus recognize and distinguish temporal sequences. This work is a step forward in the construction of neural networks that exploit the non-linear dynamic properties of their components to perform brain-inspired computations.

physics.app-ph↗

arXiv2019

Microwave magnetic field modulation of spin torque oscillator based on perpendicular magnetic tunnel junctions

Modulation of a spin-torque oscillator (STO) signal based on a magnetic tunnel junction (MTJ) with perpendicularly magnetized free layer is investigated. Magnetic field inductive loop was created during MTJ fabrication process, which enables microwave field application during STO operation. The frequency modulation by the microwave magnetic field of up to 3 GHz is explored, showing a potential for application in high-data-rate communication technologies. Moreover, an inductive loop is used for self-synchronization of the STO signal, which after field-locking exhibits significant improvement of the linewidth and oscillation power.

physics.app-ph↗

arXiv2019

Low offset frequency $1/f$ flicker noise in spin torque vortex oscillators

Low frequency noise close to the carrier remains little explored in spin torque nano oscillators. However, it is crucial to investigate as it limits the oscillator's frequency stability. This work addresses the low offset frequency flicker noise of a TMR-based spin-torque vortex oscillator in the regime of large amplitude steady oscillations. We first phenomenologically expand the nonlinear auto-oscillator theory aiming to reveal the properties of this noise. We then present a thorough experimental study of the oscillator's $1/f$ flicker noise and discuss the results based on the theoretical predictions. Hereby, we connect the oscillator's nonlinear dynamics with the concept of flicker noise and furthermore refer to the influence of a standard $1/f$ noise description based on the Hooge formula, taking into account the non-constant magnetic oscillation volume, which contributes to the magnetoresistance.

cond-mat.mes-hall↗

arXiv2019

Tunneling Magnetoresistance and Spin-Dependent Diode Performance in Fully Epitaxial Magnetic Tunnel Junctions with Rock-salt Type ZnO/MgO

We fabricate fully epitaxial Fe/ZnO/MgO/Fe magnetic tunnel junctions (MTJs) with a bilayer tunnel barrier, in which ZnO has a metastable rock-salt crystal structure. We observe a high magnetoresistance ratio up to 96% at room temperature (RT) and find that these MTJs have asymmetric current-voltage characteristics, and their rectifying performances are largely dependent on the magnetization alignments of the Fe electrodes. Diode responsibilities at a zero-bias voltage ($\beta_{0}$), which is an important performance index for harvesting applications, are observed up to 1.3 A/W at RT in the antiparallel alignment of the magnetizations while maintaining rather low resistance-area (RA) products (a few tens of k${\Omega\mu}$m$^2$). Even with the same top and bottom electrodes (Fe), the obtained $\beta_{0}$ values are comparable to those of reported high-performance tunnel diodes consisting of amorphous bilayer tunnel barriers with polycrystalline dissimilar electrodes. This strongly suggests that the epitaxial ZnO/MgO bilayer tunnel barrier is effective for enhancing the $\beta_{0}$ without significant increase in the RA. In addition, we demonstrate that a zero-bias anomaly in thetunnel conductance, which originates from the magnon excitations at the Fe/barrier interfaces, plays a crucial role in observed spin-dependent diode performance. The results indicate that a fully epitaxial MTJ with a bilayer tunnel barrier is a promising candidate to establish a high-performance high-frequency rectifying system.

cond-mat.mtrl-sci↗

arXiv2019

High frequency voltage-induced ferromagnetic resonance in magnetic tunnel junctions

Voltage-induced ferromagnetic resonance (V-FMR) in magnetic tunnel junctions (MTJs) with a W buffer is investigated. Perpendicular magnetic anisotropy (PMA) energy is controlled by both thickness of a CoFeB free layer deposited directly on the W buffer and a post-annealing process at different temperatures. The PMA energy as well as the magnetization damping are determined by analysing field-dependent FMR signals in different field geometries. An optimized MTJ structure enabled excitation of V-FMR at frequencies exceeding 30 GHz. The macrospin modelling is used to analyse the field- and angular-dependence of the V-FMR signal and to support experimental magnetization damping extraction.

physics.app-ph↗

arXiv2019

Deterministic magnetization switching by voltage-control of magnetic anisotropy and Dzyaloshinskii-Moriya interaction under in-plane magnetic field

Based on the micromagnetic simulations the magnetization switching in a triangle magnetic element by voltage-control of magnetic anisotropy and Dzyaloshinskii-Moriya interaction under in-plane magnetic field is proposed. The proposed switching scheme is not the toggle switching but the deterministic switching where the magnetic state is determined by the polarity of the applied voltage pulse. The mechanism and conditions for the switching are clarified. The results provide a fast and low-power writing method for magnetoresistive random access memories.

cond-mat.mes-hall↗

arXiv2019

Role of non-linear data processing on speech recognition task in the framework of reservoir computing

The reservoir computing neural network architecture is widely used to test hardware systems for neuromorphic computing. One of the preferred tasks for bench-marking such devices is automatic speech recognition. However, this task requires acoustic transformations from sound waveforms with varying amplitudes to frequency domain maps that can be seen as feature extraction techniques. Depending on the conversion method, these may obscure the contribution of the neuromorphic hardware to the overall speech recognition performance. Here, we quantify and separate the contributions of the acoustic transformations and the neuromorphic hardware to the speech recognition success rate. We show that the non-linearity in the acoustic transformation plays a critical role in feature extraction. We compute the gain in word success rate provided by a reservoir computing device compared to the acoustic transformation only, and show that it is an appropriate benchmark for comparing different hardware. Finally, we experimentally and numerically quantify the impact of the different acoustic transformations for neuromorphic hardware based on magnetic nano-oscillators.

eess.AS↗