arXiv subjects

Shigenobu Ogata

Publications and source records attributed to Shigenobu Ogata.

15 recordsLinked to original sources

arXiv2026

Dual Role of Mobile Interstitials in Defect Kinetics: From Retardation to Acceleration

Mobile interstitial atoms redistribute while defects migrate, complicating prediction of defect kinetics and leading to contradictory reports of acceleration and retardation. We formulate defect activation in a grand-canonical ensemble at fixed interstitial chemical potential and define a pathway free-energy landscape $ΔG(Λ;T,μ)$ and the corresponding activation free energy $ΔG^{\ddagger}$. We compute these quantities using both hyperplane-constrained thermodynamic integration via a mean force relation and a two-state chemical-potential integration, denoted TSCPI. The latter requires sampling only the initial and transition states; a single chemical-potential integration then yields $ΔG^{\ddagger}(T,μ)$ across a wide $μ$ range, enabling rapid mapping over temperature and chemical potential. Applied to vacancy diffusion in FCC, BCC, and HCP metals with H (including in plane and cross plane diffusion in Zr) and in BCC W with He, both free energy routes agree with diffusion coefficients from molecular dynamics mean square displacements. The resulting maps reveal regimes of suppression and enhancement, including a crossover from suppression to enhancement with increasing hydrogen concentration. A site occupancy analysis links barrier shifts to state dependent site spectrum changes and transferable interstitial interaction terms.

cond-mat.mtrl-sci↗

arXiv2026

Dislocation-ledge coupling governs semicoherent precipitate growth

Many crystalline materials acquire their properties as one crystal phase grows through another, but a long-standing defect-kinetic puzzle remains: how dense interfacial dislocation networks between two crystals advance, reorganize, and accommodate strain without relying on ordinary glide. Here, using in situ transmission electron microscopy, O-lattice analysis, and three-dimensional phase-field crystal simulations, we identify how semicoherent interfaces overcome this constraint during lath precipitate growth. In situ observations of austenite precipitates in duplex stainless steel reveal nanometer-high growth ledges propagating laterally along migrating habit planes. O-lattice analysis shows how lattice misfit prescribes a closed network across habit planes, side facets, and end faces. Simulations resolve the hidden three-dimensional dynamics: the network undergoes diffusion-assisted, non-conservative motion, producing steady end-face advance and ledge-mediated broad-facet migration while accommodating transformation strain. These results reveal a general defect-kinetic route linking point-defect transport, dislocation-network motion, interface migration, and morphology evolution.

cond-mat.mtrl-sci↗

arXiv2026

Machine-learned atomistic simulations reveal the basis of hydrogen-induced crack-plane transition in alpha-Fe

Hydrogen-related fracture in body-centered cubic Fe and ferritic steels often appears as transgranular quasi-cleavage rather than purely intergranular failure, especially at low to moderate hydrogen contents. Fractography has suggested that hydrogen may change the dominant cleavage faceting from {100} toward {110}, but atomic-scale evidence for this possible crack-plane transition remains unclear. Here we construct an efficient neural-network potential for α-Fe/H and combine large-scale, three-dimensional molecular dynamics with grand-canonical Monte Carlo (GCMC), allowing the near-tip crack-surface region and crack tip within a defined GCMC domain to exchange hydrogen with a reservoir at fixed chemical potential. A comparison of four crack systems identifies the controlling response: (100)[010], (100)[011], and (110)[001] remain cleavage-dominated, whereas the (110)[1-10] crack changes from dislocation emission in pure Fe to cleavage under hydrogen charging. The energetic origin is twofold. Hydrogen lowers the Griffith cleavage threshold of the {110} cleavage-plane family more strongly than that of {100}, and, for the controlling crack, a Rice-type energetic descriptor indicates that the surface-energy-controlled cleavage resistance decreases faster than the unstable-stacking-fault-controlled emission resistance, consistent with a weakened dislocation-emission shield. These results provide a thermodynamically consistent atomistic basis for a hydrogen-induced transgranular crack-plane transition in Fe.

physics.comp-ph↗

arXiv2026

Negative Strain-Rate Sensitivity in Metallic Glasses Driven by Rejuvenation-Relaxation Competition: Kinetic Monte Carlo Simulations and a Minimal Effective Model

When strain-rate sensitivity (SRS) is negative in metallic glasses, the material becomes weaker as the deformation rate increases, leading to accelerated plastic deformation and, eventually, catastrophic fracture. In this study, we elucidate the mechanism underlying the negative SRS using micromechanics-based kinetic Monte Carlo simulations that couple heterogeneous randomized shear transformation zone (STZ) models for metallic glasses. The model accounted for both the thermomechanical structural rejuvenation and relaxation of the energy barrier for thermal activation of STZs, incorporating a Kohlrausch-Williams-Watts (KWW)-type relaxation function. The present simulations systematically reproduce the dependence of flow stresses on strain rate, temperature, and the form of the relaxation function. The SRS tends to decrease at high strain rates and low temperatures in the simulations, and negative SRS appears when a compressed-exponential relaxation function is employed. Shear localization also appears; however, the conditions under which the observed localization emerges do not fully coincide with those leading to the negative SRS, leaving the dominant factor unclear. To clarify the dominant factor, we introduce a simplified theoretical model that reproduces flow stresses consistent with the simulation results. An analytical expression derived from the theoretical model reveals that negative SRS originates primarily from the temporal evolution of the activation barrier. Specifically, negative SRS arises when the timescale of external loading exceeds that of STZ relaxation.

cond-mat.mtrl-sci↗

arXiv2025

An empirical formulation of accelerated molecular dynamics for simulating and predicting microstructure evolution in materials

Despite its widespread use in materials science, conventional molecular dynamics (MD) simulations are severely constrained by timescale limitations. To address this shortcoming, we propose an empirical formulation of accelerated MD method, adapted from a collective-variable-based extended system dynamics framework. While this framework is originally developed for efficient free energy sampling and reaction pathway determination of specific rare events in condensed matter, we have modified it to enable accelerated MD simulation and prediction of microstructure evolution of materials across a broad range of scenarios. In essence, the nearest neighbor off-centering absolute displacement (NNOAD), which quantifies the deviation of an atom from the geometric center of its nearest neighbors in materials, is introduced. We propose that the collection of NNOADs of all atoms can serve as a generalized reaction coordinate for various structural transitions in materials. The NNOAD of each atom, represented by its three components, is coupled with three additional dynamic variables assigned to the atom. Time evolution of the additional dynamic variables follows Langevin equation, while Nosé-Hoover dynamics is employed to thermostat the system. Through careful analysis and benchmark simulations, we established appropriate parameter ranges for the equations in our method. Application of this method to several test cases demonstrates its capability to accelerate MD simulations by several orders of magnitude while maintaining kinetic consistency and good accuracy in predicting long timescale microstructure evolutions of materials. We also provide some preliminary thoughts on theoretical justification of the method, offering insights into its underlying principles.

cond-mat.mtrl-sci↗

arXiv2025

Dual Role of Nb in Defect-Mediated Strength and Ductility of γ-TiAl Alloys

The origin of the superior high-temperature strength of γ-TiAl with high Nb addition remains highly controversial, largely due to the unclear role of Nb atoms. Using large-scale hybrid Monte Carlo and molecular dynamics simulations with a self-developed neural network potential,we show that Nb atoms predominantly occupy Ti sites and form short-range order with neighboring Al atoms, but a non-negligible fraction also occupies Al sites (NbAl) and promotes the formation of antisite defects (TiAl). Both the NbAl and TiAl antisites exceptionally reduce stacking fault energies and facilitate deformation twinning, thereby enhancing plasticity. Meanwhile, these substitutional and antisite defects also increase the Peierls stress of both screw and edge dislocations, which hinders dislocation motion to cause pronounced solid-solution strengthening. This work provides mechanistic insights into the dual role of Nb in enhancing both strength and ductility in γ-TiAl and further offers guidance for defect and composition engineering in advanced alloy systems.

cond-mat.mtrl-sci↗

arXiv2025

Achieving Empirical Potential Efficiency with DFT Accuracy: A Neuroevolution Potential for the $α$-Fe--C--H System

A neuroevolution potential (NEP) for the ternary $α$-Fe--C--H system was developed based on a database generated from spin-polarized density functional theory (DFT) calculations, achieving empirical potential efficiency with DFT accuracy. At the same power consumption, simulation speeds using NEP are comparable to, or even faster than, those with bond order potentials. The NEP achieves DFT-level accuracy across a wide range of scenarios commonly encountered in studies of $α$-Fe- and $α$-Fe--C under hydrogen environments. The NEP enables large-scale atomistic simulations with DFT-level accuracy at the cost of empirical potentials, offering a practical tool to study hydrogen embrittlement in steel.

cond-mat.mtrl-sci↗

arXiv2023

Highly efficient and transferable interatomic potentials for α-iron and α-iron/hydrogen binary systems using deep neural networks

Artificial neural network potentials (NNPs) have emerged as effective tools for understanding atomic interactions at the atomic scale in various phenomena. Recently, we developed highly transferable NNPs for α-iron and α-iron/hydrogen binary systems (Physical Review Materials 5 (11), 113606, 2021). These potentials allowed us to investigate deformation and fracture in α-iron under the influence of hydrogen. However, the computational cost of the NNP remains relatively high compared to empirical potentials, limiting their applicability in addressing practical issues related to hydrogen embrittlement. In this work, building upon our prior research on iron-hydrogen NNP, we developed a new NNP that not only maintains the excellent transferability but also significantly improves computational efficiency (more than 40 times faster). We applied this new NNP to study the impact of hydrogen on the cracking of iron and the deformation of polycrystalline iron. We employed large-scale through-thickness {110}<110> crack models and large-scale polycrystalline α-iron models. The results clearly show that hydrogen atoms segregated at crack tips promote brittle-cleavage failure followed by crack growth. Additionally, hydrogen atoms at grain boundaries facilitate the nucleation of intergranular nanovoids and subsequent intergranular fracture. We anticipate that this high-efficiency NNP will serve as a valuable tool for gaining atomic-scale insights into hydrogen embrittlement.

cond-mat.mtrl-sci↗

arXiv2020

Screening of generalized stacking fault energies, surface energies and intrinsic ductile potency of refractory multicomponent alloys

Body-centered cubic (bcc) refractory multicomponent alloys are of great interest due to their remarkable strength at high temperatures. Meanwhile, further optimizing the chemical compositions of these alloys to achieve a combination of high strength and room-temperature ductility remains challenging, which would require systematic predictions of the correlated alloy properties across a vast compositional space. In the present work, we performed first-principles calculations with the special quasi-random structure (SQS) method to predict the unstable stacking fault energy ($γ_{usf}$) of the $(1\bar10)[111]$ slip system and the $(1\bar10)$-plane surface energy ($γ_{surf}$) for 106 individual binary, ternary and quaternary bcc solid-solution alloys with constituent elements among Ti, Zr, Hf, V, Nb, Ta, Mo, W, Re and Ru. Moreover, with the first-principles data and a set of physics-informed descriptors, we developed surrogate models based on statistical regression to accurately and efficiently predict $γ_{usf}$ and $γ_{surf}$ for refractory multicomponent alloys in the 10-element compositional space. Building upon binary and ternary data, the surrogate models show outstanding predictive ability in the high-order multicomponent systems. The ratio between $γ_{surf}$ and $γ_{usf}$ is a parameter to reflect the potency of intrinsic ductility of an alloy based on the Rice model of crack-tip deformation. Therefore, using the surrogate models, we performed a systematic screening of $γ_{usf}$, $γ_{surf}$ and their ratio over 112,378 alloy compositions to search for alloy candidates that may have enhanced strength-ductile synergies. Search results were also confirmed by additional first-principles calculations.

cond-mat.mtrl-sci↗

arXiv2020

Structural relaxation affecting shear transformation avalanches in metallic glasses

Avalanche behaviors, characterized by power-law statistics and structural relaxation that induces shear localization in amorphous plasticity, play an essential role in deciding the mechanical properties of amorphous metallic solids (i.e., metallic glasses). However, their interdependence is still not fully understood. To investigate the influence of structural relaxation on elementary avalanche behavior, we perform molecular-dynamics simulations for the shear deformation test of metallic glasses using two typical metallic-glass models comprising a less-relaxed (as-quenched) glass and a well-relaxed (well-aged) glass exhibiting a relatively homogeneous deformation and a shear-band-like heterogeneous deformation, respectively. The data on elementary avalanches obtained from both glass models follow the same power-law statistics with different maximum event sizes, and the well-relaxed glass shows shear localization. Evaluating the spatial correlation functions of the nonaffine squared displacements of atoms during each elementary avalanche event, we observe that the shapes of the elementary avalanche regions in the well-relaxed glasses tend to be anisotropic, whereas those in the less-relaxed glasses are relatively isotropic. Furthermore, we demonstrate that a temporal clustering in the direction of the avalanche propagation emerges, and a considerable correlation between the anisotropy and avalanche size exists in the well-relaxed glass model.

cond-mat.mtrl-sci↗

arXiv2018

Understanding the Local Flow Rate Peak of a Hopper Discharging Discs through an Obstacle Using a Tetris-like Model

Placing a round obstacle above the orifice of a flat hopper discharging uniform frictional discs has been experimentally and numerically shown in the literature to create a local peak in the gravity-driven hopper flow rate. Using frictionless molecular dynamics (MD) simulations, we show that the local peak is unrelated to the interparticle friction, the particle dispersity, and the obstacle geometry. We then construct a probabilistic Tetris-like model, where particles update their positions according to prescribed rules rather than in response to forces, and show that Newtonian dynamics are also not responsible for the local peak. Finally, we propose that the local peak is caused by an interplay between the flow rate around the obstacle, greater than the maximum when the hopper contains no obstacle, and a slow response time, allowing the overflowing particles to converge well upon reaching the hopper orifice.

cond-mat.soft↗

arXiv2018

Hydrogen embrittlement controlled by reaction of dislocation with grain boundary in alpha-iron

Hydrogen atoms absorbed by metals in the hydrogen-containing environments can lead to the premature fracture of the metal components used in load-bearing conditions. Since metals used in practice are mostly polycrystalline, grain boundaries (GBs) can play an important role in hydrogen embrittlement of metals. Here we show that the reaction of GB with lattice dislocations is a key component in hydrogen embrittlement mechanism for polycrystalline metals. We use atomistic modeling methods to investigate the mechanical response of GBs in alpha-iron with various hydrogen concentrations. Analysis indicates that dislocations impingement and emission on the GB cause the GB to locally transform into an activated state with a more disordered atomistic structure, and introduce a local stress concentration. The activation of the GB segregated with hydrogen atoms can greatly facilitate decohesion of the GB. We show that the hydrogen embrittlement model proposed here can give better explanation of many experimental observations.

cond-mat.mtrl-sci↗

arXiv2018

Incorporating a soft ordered phase into an amorphous configuration enhances its uniform plastic deformation under shear

Amorphous materials of homogeneous structures usually suffer from nonuniform deformation under shear, which can develop into shear localization and eventually destructive shear band. One approach to tackle this issue is to introduce an inhomogeneous structure containing more than one phase, which can reduce the local nonuniform shear deformation and hinder its percolation throughout the system. Using thermostated molecular dynamics (MD) simulations, we compare the deformation behavior between a homogeneous amorphous mixture of bidisperse disc particles, interacting via an n-6 Lennard-Jones potential of tunable softness, with an inhomogeneous one containing an evenly-distributed ordered phase. We change the population ratio of large to small particles to create a homogeneous or an inhomogeneous mixture, where the softness of a chosen phase can be manually adjusted by specifying n of the interparticle potential. Results of applying extensive quasistatic shear on the prepared mixtures reveal that the inhomogeneous amorphous mixture containing a soft ordered phase overall deforms more uniformly than the homogeneous one, which indicates that both the structure inhomogeneity and the inter-phase softness variance play important roles in enhancing the uniformity of the plastic deformation under shear.

cond-mat.mtrl-sci↗

arXiv2017

Volume Contraction at a Grain Boundary in Vanadium

It is a conventional wisdom that symmetry breakdown at grain boundaries in crystals introduces volume expansion and there has been no confirmed evidence of volume contraction at a grain boundary in any kind of crystals. We report surprising volume contraction at the Sigma3(111) grain boundary in vanadium. The lattice distortion near this grain boundary is found to drive the local structure toward a hypothetical ω phase, which is only slightly less stable than the bcc phase. Compressing lattice constant a of the ω-phase down to the value of bcc, as is the case at the Sigma3(111) grain boundary, results in smaller c than in bcc structure, and hence the volume contraction. We also find such a volume contraction impedes the segregation of Ti and H, while enhances that of Cr, and hence a significant influence on material properties. The discovery adds fundamental new knowledge of condensed matter, and may also point to new techniques in grain boundary engineering of novel materials through volume control.

cond-mat.mtrl-sci↗

arXiv2013

Studying the elastic properties of nanocrystalline copper using a model of randomly packed uniform grains

We develop a new Voronoi protocol, which is a space tessellation method, to generate fully dense (containing no voids) nanocrystalline models of copper (Cu) with precise grain size control; we also perform uniaxial tensile tests using molecular dynamical (MD) simulations to measure the elastic moduli of the grain boundary and the grain interior components at 300 K. We find that the grain boundary deforms more locally compared with the grain core region under thermal vibrations and is elastically less stiff than the core component at finite temperature. The elastic modulus of the grain boundary is lower than 30% of that of the grain interior. Our results will aid in the development of more accurate continuum models of nanocrystalline metals.

cond-mat.mtrl-sci↗