arXiv Science⌕ Search

arXiv subjects

Seungwon Park

Publications and source records attributed to Seungwon Park.

2 recordsLinked to original sources

Low cross-plane thermal conductivity of $κ$-Ga$_2$O$_3$ thin films

The thermal conductivities of (001) $κ$-Ga$_2$O$_3$ thin films deposited on $c$-plane sapphire substrates were measured with frequency-domain thermoreflectance (FDTR). The thermal conductivity increases from 1.83 $^{+0.19}_{-0.18}$ W/m$\cdot$K to 2.26 $^{+0.35}_{-0.40}$ W/m$\cdot$K as the thicknesses increase from 159 nm to 689 nm. This weak thickness dependence indicates that the majority of the intrinsic phonon mean free paths are smaller than the range of investigated film thicknesses. First-principles-based calculations that include phonon-phonon and phonon-boundary scattering capture this size-dependent behavior and support our experimental observation. Temperature-dependent measurements of a 689 nm film from 293 to 400 K show a decrease in thermal conductivity with increasing temperature due to enhanced phonon-phonon scattering. A weaker temperature dependence is observed in a 159 nm film where phonon-boundary scattering becomes more prominent. At comparable film thicknesses, our measured $κ$-Ga$_2$O$_3$ films exhibit lower values of cross-plane thermal conductivity than the other experimentally measured Ga$_2$O$_3$ polymorphs. Our experimental observations are supported by prior predictions, which suggest that the low thermal conductivity of $κ$-Ga$_2$O$_3$ results from its complex crystal structure, which leads to increased anharmonicity and lower phonon group velocities relative to other polymorphs. Thermal management strategies, such as integration with high-thermal-conductivity substrates, may thus be required to mitigate self-heating for $κ$-Ga$_2$O$_3$-based electronic devices.

cond-mat.mtrl-sci↗

Analytical framework for interpreting thermoreflectance measurements of nanoline gratings under finite spot illumination

A frequency-domain thermoreflectance (FDTR)-based technique is presented to measure the effective thermal properties of a material stack whose surface is patterned with metallic nanoline gratings that are heated and probed by lasers. An analytical heat diffusion model is derived for predicting the FDTR phase response that incorporates a finite laser spot radius with a Gaussian intensity profile for the pump and probe lasers, as well as the dimensions of the nanoline grating. The model is validated by comparing with measurements of Au nanoline gratings, with widths ranging from 100 to 1000 nm, fabricated on a-SiO$_2$ and $c$-sapphire substrates. Due to the short phonon mean free paths (MFPs) in these substrates, thermal transport remains in the diffusive regime for the whole range of nanoline widths. The model and the measurement show excellent agreement across different laser spot radii and nanoline widths, with a bulk thermal conductivity value of $c$-sapphire and the thermal boundary conductances at the Au-Cr/a-SiO$_2$ and Au-Cr/$c$-sapphire interfaces comparable to our prior measurements and the literature. The validated model will serve as a robust baseline for extending this method to measure effective thermal conductivity as a function of the heater size. This approach is particularly relevant for materials where non-diffusive thermal transport regimes enable probing phonon MFP dependent contributions to the thermal conductivity.

cond-mat.mtrl-sci↗