arXiv subjects

Sergio Conti

Publications and source records attributed to Sergio Conti.

At least 19 recordsLinked to original sources

arXiv2026

Phase-field approximation of sharp-interface energies accounting for lattice symmetry

We present a phase-field approximation of sharp-interface energies defined on partitions, designed for modeling grain boundaries in polycrystals. The independent variable takes values in the orthogonal group $\mathrm{O}(d)$ modulo a lattice point group $\mathcal{G}$, reflecting the crystallographic symmetries of the underlying lattice. In the sharp-interface limit, the surface energy exhibits a Read-Shockley-type behavior for small misorientation angles, scaling as $\theta|\log\theta|$. The regularized functionals are applicable to grain growth simulation and the reconstruction of grain boundaries from imaging data.

math.FA↗

arXiv2025

Affine rigidity of functions with additive oscillation

We prove that a locally integrable function $f:(a,b) \to \mathbb R$ must be affine if its mean oscillation, considered as a function of intervals, can be extended to a locally finite Borel measure. In particular, we show that any function $f$ satisfying the integro-differential identity $|Df|(I)=4\text{osc}(f,I)$ for all intervals $I \subset {(a,b)}$ must be affine.

math.AP↗

arXiv2025

Superlinear free-discontinuity models: relaxation and phase-field approximation

In this paper we develop the Direct Method in the Calculus of Variations for free-discontinuity energies whose bulk and surface densities exhibit superlinear growth, respectively for large gradients and small jump amplitudes. A distinctive feature of this kind of models is that the functionals are defined on $SBV$ functions whose jump sets may have infinite measure. Establishing general lower semicontinuity and relaxation results in this setting requires new analytical techniques. In addition, we propose a variational approximation of certain superlinear energies via phase-field models.

math.AP↗

arXiv2025

SDFs from Unoriented Point Clouds using Neural Variational Heat Distances

We propose a novel variational approach for computing neural Signed Distance Fields (SDF) from unoriented point clouds. To this end, we replace the commonly used eikonal equation with the heat method, carrying over to the neural domain what has long been standard practice for computing distances on discrete surfaces. This yields two convex optimization problems for whose solution we employ neural networks: We first compute a neural approximation of the gradients of the unsigned distance field through a small time step of heat flow with weighted point cloud densities as initial data. Then we use it to compute a neural approximation of the SDF. We prove that the underlying variational problems are well-posed. Through numerical experiments, we demonstrate that our method provides state-of-the-art surface reconstruction and consistent SDF gradients. Furthermore, we show in a proof-of-concept that it is accurate enough for solving a PDE on the zero-level set.

math.NA↗

arXiv2025

A well-posed variational approach to the identification and convergent approximation of material laws from boundary data

We formulate the problem of material identification as a problem of optimal control in which the deformation of the specimen is the state variable and the unknown material law is the control variable. We assume that the material obeys finite elasticity and that the deformation of the specimen is in static equilibrium with prescribed boundary displacements. We further assume that the attendant total energy of the specimen can be measured, e.g., with the aid of the work-energy identity. In particular, no full-field measurements, such as DIC, are required. The cost function measures the maximum discrepancy between the total elastic energy corresponding to a trial material law and the measured total elastic energy over a range of prescribed boundary displacements. The question of material identifiability is thus reduced to the question of existence and uniqueness of controls. We propose a specific functional framework, prove existence of optimal controls and show that the question of material identifiability hinges on the separating properties of the boundary data. The proposed framework naturally suggests and supports approximation by maxout neural networks, i.e., neural networks of piecewise affine or polyaffine functions and a maximum, or join, activation function. We show that maxout neural networks have the requisite density property in the space of energy densities and result in convergent approximations as the number of neurons increases to infinity. Simple examples are also presented that illustrate the minimax structure of the identification problem.

math.FA↗

arXiv2024

A discrete crystal model in three dimensions: the line-tension limit for dislocations

We propose a discrete lattice model of the energy of dislocations in three-dimensional crystals which properly accounts for lattice symmetry and geometry, arbitrary harmonic interatomic interactions, elastic deformations and discrete crystallographic slip on the full complement of slip systems of the crystal class. Under the assumption of diluteness, we show that the discrete energy converges, in the sense of $\Gamma$-convergence, to a line-tension energy defined on Volterra line dislocations, regarded as integral vector-valued currents supported on rectifiable curves. Remarkably, the line-tension limit is of the same form as that derived from semi-discrete models of linear elastic dislocations based on a core cutoff regularization. In particular, the line-tension energy follows from a cell relaxation and differs from the classical ansatz, which is quadratic in the Burgers vector.

math.AP↗

arXiv2024

Optimal rigidity estimates for maps of a compact Riemannian manifold to itself

Let $M$ be a smooth, compact, connected, oriented Riemannian manifold, and let $\imath: M \to \mathbb R^d$ be an isometric embedding. We show that a Sobolev map $f: M \to M$ which has the property that the differential $df(q)$ is close to the set $SO(T_q M, T_{f(q)} M)$ of orientation preserving isometries (in an $L^p$ sense) is already $W^{1,p}$ close to a global isometry of $M$. More precisely we prove for $p \in (1,\infty)$ the optimal linear estimate $$\inf_{\phi \in \mathrm{Isom}_+(M)} \| \imath \circ f - \imath \circ \phi\|_{W^{1,p}}^p \le C E_p(f)$$ where $$ E_p(f) := \int_M {\rm dist}^p(df(q), SO(T_q M, T_{f(q)} M)) \, d{\rm vol}_M$$ and where $\mathrm{Isom}_+(M)$ denotes the group of orientation preserving isometries of $M$. This extends the Euclidean rigidity estimate of Friesecke-James-M\"uller [Comm. Pure Appl. Math. {\bf 55} (2002), 1461--1506] to Riemannian manifolds. It also extends the Riemannian stability result of Kupferman-Maor-Shachar [Arch. Ration. Mech. Anal. {\bf 231} (2019), 367--408] for sequences of maps with $E_p(f_k) \to 0$ to an optimal quantitative estimate. The proof relies on the weak Riemannian Piola identity of Kupferman-Maor-Shachar, a uniform $C^{1,\alpha}$ approximation through the harmonic map heat flow, and a linearization argument which reduces the estimate to the well-known Riemannian version of Korn's inequality.

math.AP↗

arXiv2023

Approximation of $SBV$ functions with possibly infinite jump set

We prove an approximation result for functions $u\in SBV(\Omega;\mathbb R^m)$ such that $\nabla u$ is $p$-integrable, $1\leq p<\infty$, and $g_0(|[u]|)$ is integrable over the jump set (whose $\mathcal H^{n-1}$ measure is possibly infinite), for some continuous, nondecreasing, subadditive function $g_0$, with $g_0^{-1}(0)=\{0\}$. The approximating functions $u_j$ are piecewise affine with piecewise affine jump set; the convergence is that of $L^1$ for $u_j$ and the convergence in energy for $|\nabla u_j|^p$ and $g([u_j],\nu_{u_j})$ for suitable functions $g$. In particular, $u_j$ converges to $u$ $BV$-strictly, area-strictly, and strongly in $BV$ after composition with a bilipschitz map. If in addition $\mathcal H^{n-1}(J_u)<\infty$, we also have convergence of $\mathcal H^{n-1}(J_{u_j})$ to $\mathcal H^{n-1}(J_u)$.

math.AP↗

arXiv2023

Data-Driven Games in Computational Mechanics

We resort to game theory in order to formulate Data-Driven methods for solid mechanics in which stress and strain players pursue different objectives. The objective of the stress player is to minimize the discrepancy to a material data set, whereas the objective of the strain player is to ensure the admissibility of the mechanical state, in the sense of compatibility and equilibrium. We show that, unlike the cooperative Data-Driven games proposed in the past, the new non-cooperative Data-Driven games identify an effective material law from the data and reduce to conventional displacement boundary-value problems, which facilitates their practical implementation. However, unlike supervised machine learning methods, the proposed non-cooperative Data-Driven games are unsupervised, ansatz-free and parameter-free. In particular, the effective material law is learned from the data directly, without recourse to regression to a parameterized class of functions such as neural networks. We present analysis that elucidates sufficient conditions for convergence of the Data-Driven solutions with respect to the data. We also present selected examples of implementation and application that demonstrate the range and versatility of the approach.

cs.CE↗

arXiv2023

Functions with bounded Hessian-Schatten variation: density, variational and extremality properties

In this paper we analyze in detail a few questions related to the theory of functions with bounded $p$-Hessian-Schatten total variation, which are relevant in connection with the theory of inverse problems and machine learning. We prove an optimal density result, relative to the $p$-Hessian-Schatten total variation, of continuous piecewise linear (CPWL) functions in any space dimension $d$, using a construction based on a mesh whose local orientation is adapted to the function to be approximated. We show that not all extremal functions with respect to the $p$-Hessian-Schatten total variation are CPWL. Finally, we prove existence of minimizers of certain relevant functionals involving the $p$-Hessian-Schatten total variation in the critical dimension $d=2$.

math.FA↗

arXiv2022

Convergence rates for ansatz-free data-driven inference in physically constrained problems

We study a Data-Driven approach to inference in physical systems in a measure-theoretic framework. The systems under consideration are characterized by two measures defined over the phase space: i) A physical likelihood measure expressing the likelihood that a state of the system be admissible, in the sense of satisfying all governing physical laws; ii) A material likelihood measure expressing the likelihood that a local state of the material be observed in the laboratory. We assume deterministic loading, which means that the first measure is supported on a linear subspace. We additionally assume that the second measure is only known approximately through a sequence of empirical (discrete) measures. We develop a method for the quantitative analysis of convergence based on the flat metric and obtain error bounds both for annealing and the discretization or sampling procedure, leading to the determination of appropriate quantitative annealing rates. Finally, we provide an example illustrating the application of the theory to transportation networks.

math.OC↗

arXiv2022

Line-tension limits for line singularities and application to the mixed-growth case

We study variational models for dislocations in three dimensions in the line-tension scaling. We present a unified approach which allows to treat energies with subquadratic growth at infinity and other regularizations of the singularity near the dislocation lines. We show that the asymptotics via Gamma convergence is independent of the specific choice of the energy and of the regularization procedure.

math.AP↗

arXiv2022

An energy minimization approach to twinning with variable volume fraction

In materials that undergo martensitic phase transformation, macroscopic loading often leads to the creation and/or rearrangement of elastic domains. This paper considers an example {involving} a single-crystal slab made from two martensite variants. When the slab is made to bend, the two variants form a characteristic microstructure that we like to call ``twinning with variable volume fraction.'' Two 1996 papers by Chopra et. al. explored this example using bars made from InTl, providing considerable detail about the microstructures they observed. Here we offer an energy-minimization-based model that is motivated by their account. It uses geometrically linear elasticity, and treats the phase boundaries as sharp interfaces. For simplicity, rather than model the experimental forces and boundary conditions exactly, we consider certain Dirichlet or Neumann boundary conditions whose effect is to require bending. This leads to certain nonlinear (and nonconvex) variational problems that represent the minimization of elastic plus surface energy (and the work done by the load, in the case of a Neumann boundary condition). Our results identify how the minimum value of each variational problem scales with respect to the surface energy density. The results are established by proving upper and lower bounds that scale the same way. The upper bounds are ansatz-based, providing full details about some (nearly) optimal microstructures. The lower bounds are ansatz-free, so they explain why no other arrangement of the two phases could be significantly better.

math.AP↗

arXiv2022

Phase-field approximation of a vectorial, geometrically nonlinear cohesive fracture energy

We consider a family of vectorial models for cohesive fracture, which may incorporate $\mathrm{SO}(n)$-invariance. The deformation belongs to the space of generalized functions of bounded variation and the energy contains an (elastic) volume energy, an opening-dependent jump energy concentrated on the fractured surface, and a Cantor part representing diffuse damage. We show that this type of functional can be naturally obtained as $\Gamma$-limit of an appropriate phase-field model. The energy densities entering the limiting functional can be expressed, in a partially implicit way, in terms of those appearing in the phase-field approximation.

math.AP↗

arXiv2021

Two-scale elastic shape optimization for additive manufacturing

In this paper, a two-scale approach for elastic shape optimization of fine-scale structures in additive manufacturing is investigated. To this end, a free material optimization is performed on the macro-scale using elasticity tensors in a set of microscopically realizable tensors. A database of these realizable tensors and their cost values is obtained with a shape and topology optimization on microscopic cells, working within a fixed set of elasticity tensors samples. This microscopic optimization takes into account manufacturability constraints via predefined material bridges to neighbouring cells at the faces of the microscopic fundamental cell. For the actual additive manufacturing on a chosen fine-scale, a piece-wise constant elasticity tensor ansatz on grid cells of a macroscopic mesh is applied. The macroscopic optimization is performed in an efficient online phase, whereas the associated cell-wise optimal material patterns are retrieved from the database that was computed offline. For that, the set of admissible realizable elasticity tensors is parametrized using tensor product cubic B-splines over the unit square matching the precomputed samples. This representation is then efficiently used in an interior point method for the free material optimization on the macro-scale.

math.NA↗

arXiv2021

Variational Modeling of Paperboard Delamination Under Bending

We develop and analyze a variational model for multi-ply (i.e., multi-layered) paperboard. The model consists of a number of elastic sheets of a given thickness, which -- at the expense of an energy per unit area -- may delaminate. By providing an explicit construction for possible admissible deformations subject to boundary conditions that introduce a single bend, we discover a rich variety of energetic regimes. The regimes correspond to the experimentally observed: initial purely elastic response for small bending angle and the formation of a localized inelastic, delaminated hinge once the angle reaches a critical value. Our scaling upper bound then suggests the occurrence of several additional regimes as the angle increases. The upper bounds for the energy are partially matched by scaling lower bounds.

math.AP↗

arXiv2021

Model-free Data-Driven Inference

We present a model-free data-driven inference method that enables inferences on system outcomes to be derived directly from empirical data without the need for intervening modeling of any type, be it modeling of a material law or modeling of a prior distribution of material states. We specifically consider physical systems with states characterized by points in a phase space determined by the governing field equations. We assume that the system is characterized by two likelihood measures: one $\mu_D$ measuring the likelihood of observing a material state in phase space; and another $\mu_E$ measuring the likelihood of states satisfying the field equations, possibly under random actuation. We introduce a notion of intersection between measures which can be interpreted to quantify the likelihood of system outcomes. We provide conditions under which the intersection can be characterized as the athermal limit $\mu_\infty$ of entropic regularizations $\mu_\beta$, or thermalizations, of the product measure $\mu = \mu_D\times \mu_E$ as $\beta \to +\infty$. We also supply conditions under which $\mu_\infty$ can be obtained as the athermal limit of carefully thermalized $(\mu_{h,\beta_h})$ sequences of empirical data sets $(\mu_h)$ approximating weakly an unknown likelihood function $\mu$. In particular, we find that the cooling sequence $\beta_h \to +\infty$ must be slow enough, corresponding to quenching, in order for the proper limit $\mu_\infty$ to be delivered. Finally, we derive explicit analytic expressions for expectations $\mathbb{E}[f]$ of outcomes $f$ that are explicit in the data, thus demonstrating the feasibility of the model-free data-driven paradigm as regards making convergent inferences directly from the data without recourse to intermediate modeling steps.

math.FA↗

arXiv2021

Density of polyhedral partitions

We prove the density of polyhedral partitions in the set of finite Caccioppoli partitions. Precisely, we consider a decomposition $u$ of a bounded Lipschitz set $\Omega\subset\mathbb R^n$ into finitely many subsets of finite perimeter, which can be identified with a function in $SBV_{\rm loc}(\Omega;{\cal Z})$ with ${\cal Z}\subset \mathbb R^N$ a finite set of parameters. For all $\varepsilon>0$ we prove that such a $u$ is $\varepsilon$-close to a small deformation of a polyhedral decomposition $v_\varepsilon$, in the sense that there is a $C^1$ diffeomorphism $f_\varepsilon:\mathbb R^n\to\mathbb R^n$ which is $\varepsilon$-close to the identity and such that $u\circ f_\varepsilon-v_\varepsilon$ is $\varepsilon$-small in the strong $BV$ norm. This implies that the energy of $u$ is close to that of $v_\varepsilon$ for a large class of energies defined on partitions. Such type of approximations are very useful in order to simplify computations in the estimates of $\Gamma$-limits.

math.AP↗