arXiv ScienceSearch

arXiv subjects

Sergei N. Yurchenko

Publications and source records attributed to Sergei N. Yurchenko.

At least 19 recordsLinked to original sources

Machine learning isotope shifts in molecular energy levels

Recent advances in the use of High-Resolution Cross-Correlation Spectroscopy (HRCCS) to detect molecular species in exoplanet atmospheres, presents a new challenge for the accuracy of reference spectroscopic line lists. While parent isotopologues of key atmospheric tracers are often well-characterized, minor isotopologues, crucial for diagnosing planetary formation histories and evolution, suffer from a scarcity of experimental data, often leading to reliance on less accurate theoretical predictions. In this work, a comprehensive machine learning framework is designed to mitigate these inaccuracies by modelling the residual errors of the isotopologue extrapolation (IE) method used within the ExoMol project. A fully connected neural network architecture for carbon dioxide (CO$_2$) is shown to predict energy corrections with high fidelity, reducing the mean absolute error (MAE) relative to the original IE approach for more than 87\% of the levels when benchmarked against empirical (\Marvel) energies. Furthermore, development of a novel hybrid, molecule-aware transfer learning architecture is presented that successfully propagates correction patterns from the data-rich CO$_2$ system to the data-poor carbon monoxide (CO) system. This transfer learning approach yields MAE improvements in over 93\% of CO samples, demonstrating that physical correction factors related to isotopic substitution can be generalized across chemically related molecular systems. Updated and improved line lists are presented for 11 CO$_2$ isotopologues and energy levels for excited states of CO isotopologues are predicted. The methodology establishes a scalable, data-driven paradigm for refining molecular line lists, helping to bridge the gap between theoretical calculations and experimental precision.

astro-ph.EP

Spin-Orbit Induced Non-Adiabatic Dynamics: An Exact $\Omega$-Representation

Transforming rovibronic Hamiltonians of molecular systems from the $\Lambda S$ (Hund's case a) basis to the adiabatic $\Omega$ representation is widely used to "remove" spin-orbit coupling (SOC) and enable single-state treatments of spectra and dynamics. We show that this simplification is only apparent: the SOC elimination necessarily generates sizeable non-adiabatic couplings (NACs) from the nuclear kinetic energy operator. Neglecting these spin-orbit-induced NACs causes severe errors in rovibronic energies and transition properties. Using an analytically tractable two electronic state model and high-accuracy variational benchmarks, we derive the exact conditions for numerical equivalence between $\Omega$ and $\Lambda S$ formulations and quantify how missing NAC terms and bond-length-dependent spin factors degrade predictions. We implement a complete $\Omega$-representation workflow in Duo for diatomics, fully transforming all Hamiltonian terms and enabling side-by-side $\Omega$ vs $\Lambda S$ calculations. For common single-state pipelines (e.g., LEVEL), we provide diagnostics that flag unsafe regimes and practical remedies to restore accuracy. The results deliver actionable guidance for spectroscopy, photophysics, and kinetics: $\Omega$-based single-state approximations are reliable only when interacting states are well separated in the Franck-Condon region; otherwise, explicit non-adiabatic terms are required - even for "forbidden" transitions.

physics.chem-ph

ExoAtom: A Database of Atomic Spectra in ExoMol Format

We present the ExoAtom database, www.exomol.com/exoatom, an extension of the ExoMol database to provide atomic line lists in the ExoMol format. ExoAtom is designed for detailed astrophysical, planetary, and laboratory applications. ExoAtom currently includes atomic data for 80 neutral atoms and 74 singly charged ions. These data are extracted from both the NIST and Kurucz databases, with 79/71 atoms/ions sourced from NIST and 38/37 atoms/ions sourced from Kurucz. ExoAtom uses the file types .all, .def, .states, .trans and .pf as fundamental components for structuring atomic data in a consistent hierarchy. The .states file contains quantum numbers, uncertainties, lifetimes, etc. The .trans file specifies Einstein A coefficients and their associated wavenumbers. The .pf file provides partition functions over a wide grid of temperatures. Post-processing of the ExoAtom data is provided by the program PyExoCross. Future development of ExoAtom will include additional ionization stages.

physics.atom-ph

ExoMol line lists -- LXIII: ExoMol line lists for 12 isotopologues of CO$_2$

Extensive rovibrational line lists are constructed for 12 isotopologues of carbon dioxide: $^{12}$C$^{16}$O$_2$, $^{13}$C$^{16}$O$_2$, $^{12}$C$^{17}$O$_2$, $^{13}$C$^{17}$O$_2$, $^{12}$C$^{18}$O$_2$, $^{13}$C$^{18}$O$_2$, $^{16}$O$^{12}$C$^{17}$O, $^{16}$O$^{12}$C$^{18}$O, $^{16}$O$^{13}$C$^{17}$O, $^{16}$O$^{13}$C$^{18}$O, $^{17}$O$^{12}$C$^{18}$O, and $^{17}$O$^{13}$C$^{18}$O. The variational program TROVE was employed together with an exact kinetic energy operator, accurate empirical potential energy surface (Ames-2) and the ab initio dipole moment surface Ames-2021-40K. Empirical energy levels from the most recent MARVEL analyses, as well as from the HITRAN and CDSD databases, are used to replace calculated values where available. The line lists are further supplemented by assigning AFGL quantum numbers using machine-learning based estimators. The resulting data were employed to generate opacities with four radiative transfer codes, TauREx, ARCiS, NEMESIS, and petitRADTRANS, both for individual isotopologues and for CO$_2$ at terrestrial isotopic natural abundance. All line lists and associated data are available at www.exomol.com.

astro-ph.EP

TIRAMISU: Non-LTE radiative transfer for molecules in exoplanet atmospheres

The TIRAMISU code, a new program for computing on-the-fly non-LTE molecular spectra and opacities for solving self-consistent radiative transfer problems in exoplanet atmospheres, is presented. The ultra-hot Jupiter KELT-20 b is used as a case study to identify the wavelength regions at which non-LTE effects may be detectable. It is shown that upper atmospheric OH in vibrational non-LTE should be observable primarily via hot bands in the mid-infrared and enhanced photodissociation in the visible. Varying the abundance of OH in non-LTE demonstrates a non-linear relationship between the abundance and the strength of non-LTE effects. Using recent calculations of the photodissociation probabilities of OH it is shown that non-LTE effects can increase the total photodissociation rate by two orders of magnitude in the upper atmosphere, which is likely to have a significant impact on atmospheric and chemical modelling. Increases and reductions in the molecular opacities under non-LTE conditions may lead to the mischaracterisation of molecular abundances in retrievals that only consider opacities computed under LTE. Collisional data requirements to support future non-LTE modelling for a variety of exoplanet atmospheres and across a wide range of wavelengths are discussed.

astro-ph.EP

ExoPhoto: A Database of Temperature-Dependent Photodissociation Cross Sections

We present the ExoPhoto database (https://exomol.com/exophoto/), an extension of the ExoMol database, specifically developed to address the growing need for high-accuracy, temperature-dependent photodissociation cross section data towards short-UV wavelengths. ExoPhoto combines theoretical models from three major computational databases (ExoMol, UGAMOP and PhoMol) and experimental datasets from two experimental groups, providing extensive wavelength and temperature coverage. ExoPhoto currently includes photodissociation data for 20 molecules: AlH, HCl, HF, MgH, OH, NaO, MgO, O2, AlCl, AlF, CS, HeH+, CO, CO2, H2O, SO2, C2H2, C2H4, H2CO, and NH3, derived from theoretical models and supported by experimental data from 5 databases. ExoPhoto also includes detailed data on branching ratios and quantum yields for selected datasets. The data structure of ExoPhoto follows the ExoMol framework, with a consistent naming convention and hierarchical JSON-based organization. Photodissociation cross sections are stored in a set of .photo files which provide data as a function of wavelength with one file for each target molecule temperature. Future developments aim to include more photodissociation cross section data and to provide data for molecules in non-local thermodynamic equilibrium (non-LTE). These will expand the utility of ExoPhoto for advanced astrophysical, planetary modeling and industrial applications.

astro-ph.EP

ExoMolHR: A Relational Database of Empirical High-Resolution Molecular Spectra

ExoMolHR is an empirical, high-resolution molecular spectrum calculator for the high-temperature molecular line lists available from the ExoMol molecular database. Uncertainties, where available, in recommended ExoMol datasets are used to select highly accurate spectral lines. These lines largely rely on empirical energy levels generated through the MARVEL (measured active rotation vibration energy levels) procedure, which is being systematically used to improve the energy and transition data provided by the ExoMol database. The freely accessible ExoMolHR database provides line positions with calculated intensities for a user-specified wavenumber/wavelength range and temperature. Spectra can be plotted on the ExoMolHR website (https://www.exomol.com/exomolhr/) or downloaded as a CSV file. Cross sections can be calculated using the Python program PyExoCross. The ExoMolHR database currently provides 24307135 spectral lines for 33 molecules and 58 isotopologues; these numbers will increase as the ExoMol database is updated.

astro-ph.EP

A new look into the atmospheric composition of WASP-39 b

Being one of the first exoplanets observed by the James Webb Space Telescope, WASP-39 b has become an iconic target and many transit spectra recorded with different instruments (NIRISS, NIRCAM, NIRSpec G395H, NIRSpec PRISM and MIRI) are currently available, allowing in-depth studies of its atmosphere. We present here a novel approach to interpret WASP-39 b's transit spectroscopic data, consisting of a multi-step process where ab initio equilibrium chemistry models and blind retrievals are used iteratively to find physically robust, optimal solutions. Following this approach, we have identified a new scenario to explain WASP-39 b's atmospheric composition, in which silicon-based chemistry plays a major role. In this scenario, SiO may explain the spectral absorption at 4.1 $\mu$m, currently interpreted as being due to SO$_2$. SiO and the other gas species identified by the retrieval models, i.e. H$_2$O, CO$_2$, Na and K, are consistent with an atmosphere in chemical equilibrium with a temperature-pressure profile constrained by H$_2$O and CO$_2$ absorption bands. In addition, silicate clouds and hazes can produce the spectral features observed by MIRI in the spectral window 5-12 $\mu$m. While we advocate the need for more data, possibly at higher spectral resolution, to confirm our results for WASP-39 b's atmospheric composition, we highlight a refined atmospheric retrieval strategy with pre-selection and post-reconstruction to guide the next generation of transit spectroscopy.

astro-ph.EP

ExoMol line lists -- LXIV: Empirical rovibronic spectra of phosphorous mononitride (PN) covering the IR and UV regions

A new phosphorous mononitride (${}^{31}$P${}^{14}$N, ${}^{31}$P${}^{15}$N) line list PaiN covering infrared, visible and ultraviolet regions is presented. The PaiN line list extending to the $A\,{}^{1}\Pi$ -- $X\,{}^{1}\Sigma^{+}$ vibronic band system, replaces the previous YYLT ExoMol line list for PN. A thorough analysis of high resolution experimental spectra from the literature involving the $X\,{}^{1}\Sigma^{+}$ and $A\,{}^{1}\Pi$ states is conducted, and many perturbations to the $A\,{}^{1}\Pi$ energies are considered as part of a comprehensive MARVEL study. Ab initio potential energy and coupling curves from the previous work [Semenov et al., Phys. Chem. Chem. Phys., 23, 22057 (2021)] are refined by fitting their analytical representations to 1224 empirical energy levels determined using the MARVEL procedure. The PaiN line list is compared to previously observed spectra, recorded and calculated lifetimes, and previously calculated partition functions. The ab initio transition dipole moment curve for the $A$--$X$ band is scaled to match experimentally measured lifetimes. The line list is suitable for temperatures up to 5000 K and wavelengths longer than 121 nm. PaiN is available from www.exomol.com.

astro-ph.EP

ExoMol line lists -- LXV. Mid-Infrared rovibronic spectroscopy of isotopologues of NiH

New line lists for four isotopologues of nickel monohydride, $^{58}$NiH, $^{60}$NiH, $^{62}$NiH, and $^{58}$NiD are presented covering the wavenumber range $<10000$ cm$^{-1}$ ($\lambda > 1$ $\mu$m), $J$ up to 37.5 for transitions within and between the three lowest-lying electronic states, ${X}\,^{2}\Delta$, ${W}\,^{2}\Pi$, and ${V}\,^{2}\Sigma^{+}$. The line lists are applicable for temperatures up to 5000 K. The line lists calculations are based on a recent empirical NiH spectroscopic model [Havalyova et al. J. Quant. Spectrosc. Radiat. Transf., 272, 107800, (2021)] which is adapted for the variational nuclear-motion code Duo. The model consists of potential energy curves, spin-orbit coupling curves, electronic angular momentum curves, spin-rotation coupling curves, $\Lambda$-doubling correction curve for $^2\Pi$ states and Born-Oppenheimer breakdown (BOB) rotational correction curves. New ab initio dipole moment curves, scaled to match the experimental dipole moment of the ground state, are used to compute Einstein A coefficients. The BYOT line lists are included in the ExoMol database at www.exomol.com.

astro-ph.SR

ExoMol line lists -- LX. Molecular line list for the ammonia isotopologue $^{15}$NH$_3$

A theoretical line list for $^{15}$NH$_3$ CoYuTe-15 is presented based on the empirical potential energy and ab initio dipole moments surfaces developed and used for the production of the ExoMol line list CoYuTe for $^{14}$NH$_3$. The ro-vibrational energy levels and wavefunctions are computed using the variational program TROVE. The line list ranges up to 10000 cm$^{-1}$ ($\lambda \geq 1$ $\mu$m) and contains 929 795 249 transitions between 1 269 961 states with $J\le 30$. The line list should be applicable for temperatures up to $\sim$1000 K. To improve the accuracy of the line positions, a set of experimentally-derived energy levels of $^{15}$NH$_3$ is produced using the MARVEL procedure. To this end, 37 experimental sources of the line positions of $^{15}$NH$_3$ available in the literature are collected, combined and systematised to produce a self-consistent spectroscopic network of 21095 $^{15}$NH$_3$ transitions covering 40 vibrational bands ranging up to 6818 cm$^{-1}$ and resulting in 2777 energy term values. These MARVEL energies are then used to replace the theoretical values in the CoYuTe-15 line list and also complemented by pseudo-MARVEL energies obtained by an isotopologue extrapolation using the previously reported MARVEL energies of the $^{14}$NH$_3$ parent isotopologue of ammonia. A list of 53856 high resolution transitions between MARVEL states and theoretical intensities is provided in the HITRAN format. Comparison with the recent experimental spectra of $^{15}$NH$_3$ illustrate the potential of the line list for detections and as an efficient assistant in spectroscopic assignments. The line list is available from www.exomol.com.

astro-ph.EP

ExoMol line lists -- LIX. High-temperature line list for N$_2$O

New hot line lists for five isotopologues of N$_2$O are presented, for the parent $^{14}$N$_2^{16}$O and 4 singly substituted species $^{14}$N$_2^{17}$O, $^{14}$N$_2^{18}$O, $^{14}$N$^{15}$N$^{16}$O and $^{15}$N$^{14}$N$^{16}$O. The line lists have been computed with the variational program TROVE using a new empirical potential energy surface (PES) and an accurate ab initio dipole moment surface of N$_2$O Ames-1. The PES was obtained by fitting to experimentally derived energies of N$_2$O compiled using the well established MARVEL procedure. Here we also introduce an `artificial symmetry group' $C_{\rm ns}$(AEM) for an efficient construction of rotation-vibrational basis set of a linear non-symmetric triatomic molecule of the XYZ type. The line lists cover the rotational excitations up to $J=160$ and the wavenumber range up to 20000 cm$^{-1}$. MARVEL energies are also used to improve predicted line positions resulting in excellent agreement with the available experimental spectra, as demonstrated. An extensive comparison with existing line lists for N$_2$O HITRAN, HITEMP, NOSL-296, NOSD-1000 and Ames-296K is provided. The line lists are freely accessible from www.exomol.com.

astro-ph.EP

A hybrid approach to generating diatomic line lists for high resolution studies of exoplanets and other hot astronomical objects: Updates to ExoMol MgO, TiO and VO line lists

The best molecular line lists for astrophysical applications today require both high accuracy of line positions for strong lines as well as high overall completeness. The former is required to enable, for example, molecular detection in high-resolution cross-correlation observations of exoplanets, while completeness is required for accurate spectroscopic and radiative properties over broad temperature and spectral ranges. The use of empirical energies generated with the Marvel procedure is a standard way to improve accuracy; here we explore methods of extending the use of these levels using predicted shifts and isotopologue extrapolation, as well augmenting the levels from other sources such as effective Hamiltonian studies. These methods are used to update ExoMol line lists for the main 24Mg16O and 48Ti16O isotopologues, as well as for 24Mg17O, 24Mg18O, 25Mg16O, 26Mg16O, 46Ti16O, 47Ti16O, 49Ti16O and 50Ti16O; new Marvel results for 51V16O are also presented

astro-ph.SR

Sulphur dioxide in the mid-infrared transmission spectrum of WASP-39b

The recent inference of sulphur dioxide (SO$_2$) in the atmosphere of the hot ($\sim$1100 K), Saturn-mass exoplanet WASP-39b from near-infrared JWST observations suggests that photochemistry is a key process in high temperature exoplanet atmospheres. This is due to the low ($<$1 ppb) abundance of SO$_2$ under thermochemical equilibrium, compared to that produced from the photochemistry of H$_2$O and H$_2$S (1-10 ppm). However, the SO$_2$ inference was made from a single, small molecular feature in the transmission spectrum of WASP-39b at 4.05 $\mu$m, and therefore the detection of other SO$_2$ absorption bands at different wavelengths is needed to better constrain the SO$_2$ abundance. Here we report the detection of SO$_2$ spectral features at 7.7 and 8.5 $\mu$m in the 5-12 $\mu$m transmission spectrum of WASP-39b measured by the JWST Mid-Infrared Instrument (MIRI) Low Resolution Spectrometer (LRS). Our observations suggest an abundance of SO$_2$ of 0.5-25 ppm (1$\sigma$ range), consistent with previous findings. In addition to SO$_2$, we find broad water vapour absorption features, as well as an unexplained decrease in the transit depth at wavelengths longer than 10 $\mu$m. Fitting the spectrum with a grid of atmospheric forward models, we derive an atmospheric heavy element content (metallicity) for WASP-39b of $\sim$7.1-8.0 $\times$ solar and demonstrate that photochemistry shapes the spectra of WASP-39b across a broad wavelength range.

astro-ph.EP

The 2024 release of the ExoMol database: molecular line lists for exoplanet and other hot atmospheres

The ExoMol database (www.exomol.com) provides molecular data for spectroscopic studies of hot atmospheres. These data are widely used to model atmospheres of exoplanets, cool stars and other astronomical objects, as well as a variety of terrestrial applications. The 2024 data release reports the current status of the database which contains recommended line lists for 91 molecules and 224 isotopologues giving a total of almost 10$^{12}$ individual transitions. New features of the database include extensive "MARVELization" of line lists to allow them to be used for high resolutions studies, extension of several line lists to ultraviolet wavelengths, provision of photodissociation cross sections and extended provision of broadening parameters. Some of the in-house data specifications have been rewritten in JSON and moved to conformity with other international standards. Data products, including specific heats, a database of lifetimes for plasma studies, and the ExoMolHR web app which allows exclusively high resolution data to be extracted, are discussed.

astro-ph.GA

PyExoCross: a Python program for generating spectra and cross-sections from molecular line lists

PyExoCross is a Python adaptation of the ExoCross Fortran application, PyExoCross is designed for postprocessing the huge molecular line lists generated by the ExoMol project and other similar initiatives such as the HITRAN and HITEMP databases. PyExoCross generates absorption and emission stick spectra, cross-sections, and other properties (partition functions, specific heats, cooling functions, lifetimes, and oscillator strengths) based on molecular line lists. PyExoCross calculates cross-sections with four line profiles: Doppler, Gaussian, Lorentzian, and Voigt profiles in both sampling and binned methods; a number of options are available for computing Voigt profiles which we test for speed and accuracy. PyExoCross supports importing and exporting line lists in the ExoMol and HITRAN/HITEMP formats. PyExoCross also provides conversion between the ExoMol and HITRAN data formats. In addition, PyExoCross has extra code for users to automate the batch download of line list files from the ExoMol database.

astro-ph.IM

Data availability and requirements relevant for the Ariel space mission and other exoplanet atmosphere applications

The goal of this white paper is to provide a snapshot of the data availability and data needs primarily for the Ariel space mission, but also for related atmospheric studies of exoplanets and brown dwarfs. It covers the following data-related topics: molecular and atomic line lists, line profiles, computed cross-sections and opacities, collision-induced absorption and other continuum data, optical properties of aerosols and surfaces, atmospheric chemistry, UV photodissociation and photoabsorption cross-sections, and standards in the description and format of such data. These data aspects are discussed by addressing the following questions for each topic, based on the experience of the "data-provider" and "data-user" communities: (1) what are the types and sources of currently available data, (2) what work is currently in progress, and (3) what are the current and anticipated data needs. We present a GitHub platform for Ariel-related data, with the goal to provide a go-to place for both data-users and data-providers, for the users to make requests for their data needs and for the data-providers to link to their available data. Our aim throughout the paper is to provide practical information on existing sources of data whether in databases, theoretical, or literature sources.

astro-ph.IM

Nightside clouds and disequilibrium chemistry on the hot Jupiter WASP-43b

Hot Jupiters are among the best-studied exoplanets, but it is still poorly understood how their chemical composition and cloud properties vary with longitude. Theoretical models predict that clouds may condense on the nightside and that molecular abundances can be driven out of equilibrium by zonal winds. Here we report a phase-resolved emission spectrum of the hot Jupiter WASP-43b measured from 5-12 $\mu$m with JWST's Mid-Infrared Instrument (MIRI). The spectra reveal a large day-night temperature contrast (with average brightness temperatures of 1524$\pm$35 and 863$\pm$23 Kelvin, respectively) and evidence for water absorption at all orbital phases. Comparisons with three-dimensional atmospheric models show that both the phase curve shape and emission spectra strongly suggest the presence of nightside clouds which become optically thick to thermal emission at pressures greater than ~100 mbar. The dayside is consistent with a cloudless atmosphere above the mid-infrared photosphere. Contrary to expectations from equilibrium chemistry but consistent with disequilibrium kinetics models, methane is not detected on the nightside (2$\sigma$ upper limit of 1-6 parts per million, depending on model assumptions).

astro-ph.EP