arXiv Science⌕ Search

arXiv subjects

Sebastien Forget

Publications and source records attributed to Sebastien Forget.

At least 19 recordsLinked to original sources
arXiv2022

Temporal dynamics of diode-pumped circulation-free liquid dye lasers

A highly stable diode-pumped circulation-free liquid dye laser in a vertical external cavity is reported. The design is simple (no fabrication process step required, no fluid circuitry), compact (~ cm sized), and cost-effective. An optical efficiency of 18% with a M${}^2$ of 1 are reported, with an excellent photostability-no efficiency drop was seen after 1.4 million pulses at 50 Hz, a value comparable to flowing systems and much higher than values achievable with organic solid-state lasers. We show that thermal effects are central in the stability and also on the dynamics of this laser. The laser build-up and shutdown dynamics are studied in detail for different pump pulse durations/repetition rates; they reveal a pulse shortening with increasing pump pulse duration and repetition rate that are shown to be due to thermal lensing diffraction losses. This laser structure offers a very convenient and simple platform for testing or harvesting solution-processable gain materials.

physics.optics↗
arXiv2022

Highly photo-stable, kHz-repetition-rate, diode pumped circulation-free liquid dye laser with thermal lens management

Liquid dye lasers have long been considered as ideal tunable laser sources in the visible range but are bulky, expensive, and require a complex system for dye circulation. Here, we present a system that relies on a low-cost blue laser diode as the pump source and a sealed dye cell with no flowing circuitry, resulting in a device that combines the convenience and size of a solid-state device with the stability of a liquid organic laser. A very high photo-stability is obtained (up to 1.2 x 10$^9$ pulses or 12 days at 1 kHz), which is five orders of magnitude higher than a solid-state dye laser operated in similar conditions. The number of pulses obtainable at low repetition rates is found to be limited by molecular self-diffusion and, hence, related to the total cuvette volume. In contrast, the repetition rate is limited to a few kHz, which suggests that thermal effects play a bigger role than triplet population effects. Thermal effects participate in the suppression of lasing through the buildup of a strong negative thermal lens; correcting the non-aberrant part of this thermal lens by resonator design enables the repetition rate to be pushed up to 14 kHz with possible further optimization. This work shows a route for building off-the-shelf, compact, low-cost, and convenient tunable pulsed lasers in the visible range that have superior stability over organic solid-state lasers.

physics.optics↗
arXiv2014

White organic light-emitting diodes with an ultra-thin premixed emitting layer

We described an approach to achieve fine color control of fluorescent White Organic Light-Emitting Diodes (OLED), based on an Ultra-thin Premixed emitting Layer (UPL). The UPL consists of a mixture of two dyes (red-emitting 4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene or fvin and green-emitting 4-di(4'-tert-butylbiphenyl-4-yl)aminobenzaldehyde or fcho) premixed in a single evaporation cell: since these two molecules have comparable structures and similar melting temperatures, a blend can be evaporated, giving rise to thin films of identical and reproducible composition compared to those of the pre-mixture. The principle of fine color tuning is demonstrated by evaporating a 1-nm-thick layer of this blend within the hole-transport layer (4,4'-bis[N-(1-naphtyl)-N-phenylamino]biphenyl (\alpha-NPB)) of a standard fluorescent OLED structure. Upon playing on the position of the UPL inside the hole-transport layer, as well as on the premix composition, two independent parameters are available to finely control the emitted color. Combined with blue emission from the heterojunction, white light with Commission Internationale de l'Eclairage 1931 color coordinates (0.34, 0.34) was obtained, with excellent color stability with the injected current. The spectrum reveals that the fcho material does not emit light due to efficient energy transfer to the red-emitting fvin compound but plays the role of a host matrix for fvin, allowing for a very precise adjustment of the red dopant amount in the device.

physics.optics↗
arXiv2014

Broadly tunable (440-670 nm) solid-state organic laser with disposable capsules

An innovative concept of thin-film organic solid-state laser is proposed, with diffraction-limited output and a broad tuning range covering the visible spectrum under UV optical pumping. The laser beam is tunable over 230 nm, from 440 to 670 nm, with a 3 nm full width at half maximum typical spectral width. The structure consists of a compact fixed bulk optical cavity, a polymeric intracavity etalon for wavelength tuning, as well as five different disposable glass slides coated with a dye-doped polymer film, forming a very simple and low-cost gain medium. The use of interchangeable/disposable "gain capsules" is an alternative solution to photodegradation issues, since gain chips can be replaced without realignment of the cavity. The laser lifetime of a single chip in ambient conditions and without encapsulation was extrapolated to be around 107 pulses at a microjoule energy-per-pulse level.

physics.optics↗
arXiv2011

Recent advances in solid-state organic lasers

Organic solid-state lasers are reviewed, with a special emphasis on works published during the last decade. Referring originally to dyes in solid-state polymeric matrices, organic lasers also include the rich family of organic semiconductors, paced by the rapid development of organic light emitting diodes. Organic lasers are broadly tunable coherent sources are potentially compact, convenient and manufactured at low-costs. In this review, we describe the basic photophysics of the materials used as gain media in organic lasers with a specific look at the distinctive feature of dyes and semiconductors. We also outline the laser architectures used in state-of-the-art organic lasers and the performances of these devices with regard to output power, lifetime, and beam quality. A survey of the recent trends in the field is given, highlighting the latest developments in terms of wavelength coverage, wavelength agility, efficiency and compactness, or towards integrated low-cost sources, with a special focus on the great challenges remaining for achieving direct electrical pumping. Finally, we discuss the very recent demonstration of new kinds of organic lasers based on polaritons or surface plasmons, which open new and very promising routes in the field of organic nanophotonics.

physics.optics↗
arXiv2011

Tunable Ultraviolet Vertically-emitting Organic Laser

A solid-state organic thin-film laser with intracavity frequency doubling is reported. Tunable ultraviolet emission from 309 to 322 nm is achieved from a vertical external cavity surface-emitting organic laser, with 2 % efficiency (1 $\mu$J at 315 nm). The laser comprises a polymethyl(methacrylate) layer doped with Rhodamine 640, spun-cast onto a plane mirror, a remote concave mirror, a nonlinear crystal and a dichroic separator. The output is spectrally narrow (<0.5 nm FWHM) and tunable through phase-matching selection of the fundamental radiation lasing modes. These results highlight a low-cost and portable alternative to tunable UV laser sources, useful for spectroscopic applications.

physics.optics↗
arXiv2010

Red-emitting fluorescent Organic Light emitting Diodes with low sensitivity to self-quenching

Concentration quenching is a major impediment to efficient organic light-emitting devices. We herein report on Organic Light-Emitting Diodes (OLEDs) based on a fluorescent amorphous red-emitting starbust triarylamine molecule (4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, named FVIN), exhibiting a very small sensitivity to concentration quenching. OLEDs are fabricated with various doping levels of FVIN into Alq3, and show a remarkably stable external quantum efficiency of 1.5% for doping rates ranging from 5% up to 40%, which strongly relaxes the technological constraints on the doping accuracy. An efficiency of 1% is obtained for a pure undoped active region, along with deep red emission (x=0.6; y=0.35 CIE coordinates). A comparison of FVIN with the archetypal DCM dye is presented in an identical multilayer OLED structure.

cond-mat.mtrl-sci↗
arXiv2010

Highly-efficient, diffraction-limited laser emission from a Vertical External Cavity Surface-emitting Organic Laser

We report on a solid-state laser structure being the organic counterpart of the Vertical External-Cavity Surface-Emitting Laser (VECSEL) design. The gain medium is a poly (methyl methacrylate) film doped with Rhodamine 640, spin-casted onto the High-Reflectivity mirror of a plano-concave resonator. Upon pumping by 7-ns pulses at 532 nm, a diffraction-limited beam (M^2=1) was obtained, with a conversion efficiency of 43%; higher peak powers (2kW) could be attained when resorting to shorter (0.5 ns) pump pulses. The spectrum was controlled by the thickness of the active layer playing the role of an intracavity etalon; tunability is demonstrated over up to 20 nm.

physics.optics↗
arXiv2009

Gain measurement and low-threshold laser operation in non-doped thin films made of a small-molecule organic red-emitter

Stimulated emission in small-molecule organic films at a high dye concentration is generally hindered by fluorescence quenching, especially in the red region of the spectrum. Here we demonstrate the achievement of high net gains (up to 50 cm-1) around 640 nm in thermally evaporated non-doped films of 4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, which makes this material suitable for green-light pumped single-mode organic lasers with low threshold and superior stability. Lasing effect is demonstrated in a DBR resonator configuration, as well as under the form of random lasing at high pump intensities.

physics.optics↗
arXiv2007

Enhanced generation of VUV radiation by four-wave mixing in mercury using pulsed laser vaporization

The efficiency of a coherent VUV source at 125 nm, based on 2-photon resonant four-wave mixing in mercury vapor, has been enhanced by up to 2 orders of magnitude. This enhancement was obtained by locally heating a liquid Hg surface with a pulsed excimer laser, resulting in a high density vapor plume in which the nonlinear interaction occurred. Energies up to 5 μJ (1 kW peak power) have been achieved while keeping the overall Hg cell at room temperature, avoiding the use of a complex heat pipe. We have observed a strong saturation of the VUV yield when peak power densities of the fundamental beams exceed the GW/cm2 range, as well as a large intensity-dependant broadening (up to ~30 cm-1) of the two-photon resonance. The source has potential applications for high resolution interference lithography and photochemistry.

physics.optics↗
arXiv2007

On thermal effects in solid state lasers: the case of ytterbium-doped materials

A review of theoretical and experimental studies of thermal effects in solid-state lasers is presented, with a special focus on diode-pumped ytterbium-doped materials. A large part of this review provides however general information applicable to any kind of solid-state laser. Our aim here is not to make a list of the techniques that have been used to minimize thermal effects, but instead to give an overview of the theoretical aspects underneath, and give a state-of-the-art of the tools at the disposal of the laser scientist to measure thermal effects. After a presentation of some general properties of Yb-doped materials, we address the issue of evaluating the temperature map in Yb-doped laser crystals, both theoretically and experimentally. This is the first step before studying the complex problem of thermal lensing (part III). We will focus on some newly discussed aspects, like the definition of the thermo-optic coefficient: we will highlight some misleading interpretations of thermal lensing experiments due to the use of the dn/dT parameter in a context where it is not relevant. Part IV will be devoted to a state-of-the-art of experimental techniques used to measure thermal lensing. Eventually, in part V, we will give some concrete examples in Yb-doped materials, where their peculiarities will be pointed out.

physics.optics↗
arXiv2007

Doped and non-doped organic light-emitting diodes based on a yellow carbazole emitter into a blue-emitting matrix

A new carbazole derivative with a 3,3'-bicarbazyl core 6,6'-substituted by dicyanovinylene groups (6,6'-bis(1-(2,2'-dicyano)vinyl)-N,N'-dioctyl-3,3'-bicarbazyl; named (OcCz2CN)2, was synthesized by carbonyl-methylene Knovenagel condensation, characterized and used as a component of multilayer organic light-emitting diodes (OLEDs). Due to its -donor-acceptor type structure, (OcCz2CN)2 was found to emit a yellow light at max=590 nm (with the CIE coordinates x=0.51; y = 0.47) and was used either as a dopant or as an ultra-thin layer in a blue-emitting matrix of 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl (DPVBi). DPVBi (OcCz2CN)2-doped structure exhibited, at doping ratio of 1.5 weight %, a yellowish-green light with the CIE coordinates (x = 0.31; y = 0.51), an electroluminescence efficiency EL=1.3 cd/A, an external quantum efficiency ext= 0.4 % and a luminance L= 127 cd/m2 (at 10 mA/cm2) whereas for non-doped devices utilizing the carbazolic fluorophore as a thin neat layer, a warm white with CIE coordinates (x = 0.40; y= 0.43), EL= 2.0 cd/A, ext= 0.7 %, L = 197 cd/m2 (at 10 mA/cm2) and a color rendering index (CRI) of 74, were obtained. Electroluminescence performances of both the doped and non-doped devices were compared with those obtained with 5,6,11,12-tetraphenylnaphtacene (rubrene) taken as a reference of highly efficient yellow emitter.

physics.optics↗
arXiv2006

Direct and absolute temperature mapping and heat transfer measurements in diode-end-pumped Yb:YAG

We report direct and absolute temperature measurements in a diode-end-pumped Yb:YAG crystal, using a calibrated infrared camera, with a 60-$μ$m spatial resolution. The heat transfer coefficient has been measured, for the first time to our knowledge, with four different types of thermal contact (H = 0.25, 0.28, 0.9 and 2.0 for bare contact, graphite layer, indium foil and heat sink grease respectively). The dynamics of thermal effects is also presented.

physics.optics↗
arXiv2006

New 3D multipass amplifier based on Nd:YAG or Nd:YVO4 crystals

We report on new simple and efficient multipass amplifiers using prisms or corner cubes to perform several passes in different planes of incidence. This scheme provides an optimized overlap between the signal passes and the pumped volume. We investigated our amplification geometry with Nd:YAG and Nd: YVO4 crystals : the use of a low doped (0.3%) Nd:YVO4 crystal allowed better thermal behaviour and higher performances. We amplified a pulsed microlaser (110 mW of average power at 1064 nm) and obtained a diffraction-limited output beam with an average power of 5.7 W for 15 W of pump power and a small-signal gain of 56 dB in a 6-pass configuration.

physics.optics↗
arXiv2006

Picosecond laser source at 1 MHz with continuous tunability in the visible red band

We report the first demonstration to our knowledge of a continuously tunable picosecond laser operating around 1 MHz. The emission can be tuned from 640 to 685 nm and the repetition rate from 200 kHz to 1 MHz with a pulse duration of less than 200 ps. The system is based on a Nd:YVO4 passively Q-switched microchip laser providing a few tens of nJ per pulse. Two cascaded stages of amplification are then used to increase the pulse energy to several microJ . The frequency doubled radiation is then used to pump a periodically-poled-niobate-lithium (PPLN)-based optical parametric generator in an all-solid-state architecture. 20 nJ of tunable signal radiation are obtained. We also demonstrated 300-ps pulses generation in the UV (355 nm) at 1 MHz.

physics.optics↗
arXiv2006

Passively mode-locked diode-pumped Nd:YVO4 oscillator operating at ultra-low repetition rate

We demonstrate the operation of an ultra low repetition rate, high peak power, picosecond diode pumped Nd:YVO4 passively mode locked laser oscillator. Repetition rates even below 1 MHz were achieved with the use of a new design multiple-pass cavity and a semiconductor saturable absorber. Long term stable operation at 1.2 MHz, pulse duration of 16.3 ps and average output power of 470 mW corresponding to 24 KW peak power pulses is reported. This is, to our knowledge, the lowest repetition rate high peak power pulses ever generated directly from a picosecond laser resonator without cavity dumping.

physics.optics↗
arXiv2006

High power spatial single-mode quantum cascade lasers at 8.9 $μ$m

High performance of InP-based quantum cascade lasers emitting at $λ$ ~ 9$μ$m are reported. Thick electroplated gold layer was deposited on top of the laser to improve heat dissipation. With one facet high reflection coated, the devices produce a maximum output power of 175mW at 40% duty cycle at room temperature and continuous-wave operation up to 278K.

physics.optics↗