arXiv subjects

Sebastian Scherer

Publications and source records attributed to Sebastian Scherer.

At least 181 records · Page 10Linked to original sources

arXiv2021

ORStereo: Occlusion-Aware Recurrent Stereo Matching for 4K-Resolution Images

Stereo reconstruction models trained on small images do not generalize well to high-resolution data. Training a model on high-resolution image size faces difficulties of data availability and is often infeasible due to limited computing resources. In this work, we present the Occlusion-aware Recurrent binocular Stereo matching (ORStereo), which deals with these issues by only training on available low disparity range stereo images. ORStereo generalizes to unseen high-resolution images with large disparity ranges by formulating the task as residual updates and refinements of an initial prediction. ORStereo is trained on images with disparity ranges limited to 256 pixels, yet it can operate 4K-resolution input with over 1000 disparities using limited GPU memory. We test the model's capability on both synthetic and real-world high-resolution images. Experimental results demonstrate that ORStereo achieves comparable performance on 4K-resolution images compared to state-of-the-art methods trained on large disparity ranges. Compared to other methods that are only trained on low-resolution images, our method is 70% more accurate on 4K-resolution images.

cs.CV↗

arXiv2021

Integration of Fully-Actuated Multirotors into Real-World Applications

The introduction of fully-actuated multirotors has opened the door to new possibilities and more efficient solutions to many real-world applications. However, their integration had been slower than expected, partly due to the need for new tools to take full advantage of these robots. As far as we know, all the groups currently working on the fully-actuated multirotors develop new full-pose (6-D) tools and methods to use their robots, which is inefficient, time-consuming, and requires many resources. We propose a way of bridging the gap between the tools already available for underactuated robots and the new fully-actuated vehicles. The approach can extend the existing underactuated flight controllers to support the fully-actuated robots, or enhance the existing fully-actuated controllers to support existing underactuated flight stacks. We introduce attitude strategies that work with the underactuated controllers, tools, planners and remote control interfaces, all while allowing taking advantage of the full actuation. Moreover, new methods are proposed that can properly handle the limited lateral thrust suffered by many fully-actuated UAV designs. The strategies are lightweight, simple, and allow rapid integration of the available tools with these new vehicles for the fast development of new real-world applications. The real experiments on our robots and simulations on several UAV architectures with different underlying controller methods show how these strategies can be utilized to extend existing flight controllers for fully-actuated applications. We have provided the source code for the PX4 firmware enhanced with our proposed methods to showcase an example flight controller for underactuated multirotors that can be modified to seamlessly support fully-actuated vehicles while retaining the rest of the flight stack unchanged.

cs.RO↗

arXiv2020

TP-TIO: A Robust Thermal-Inertial Odometry with Deep ThermalPoint

To achieve robust motion estimation in visually degraded environments, thermal odometry has been an attraction in the robotics community. However, most thermal odometry methods are purely based on classical feature extractors, which is difficult to establish robust correspondences in successive frames due to sudden photometric changes and large thermal noise. To solve this problem, we propose ThermalPoint, a lightweight feature detection network specifically tailored for producing keypoints on thermal images, providing notable anti-noise improvements compared with other state-of-the-art methods. After that, we combine ThermalPoint with a novel radiometric feature tracking method, which directly makes use of full radiometric data and establishes reliable correspondences between sequential frames. Finally, taking advantage of an optimization-based visual-inertial framework, a deep feature-based thermal-inertial odometry (TP-TIO) framework is proposed and evaluated thoroughly in various visually degraded environments. Experiments show that our method outperforms state-of-the-art visual and laser odometry methods in smoke-filled environments and achieves competitive accuracy in normal environments.

cs.RO↗

arXiv2020

ULSD: Unified Line Segment Detection across Pinhole, Fisheye, and Spherical Cameras

Line segment detection is essential for high-level tasks in computer vision and robotics. Currently, most stateof-the-art (SOTA) methods are dedicated to detecting straight line segments in undistorted pinhole images, thus distortions on fisheye or spherical images may largely degenerate their performance. Targeting at the unified line segment detection (ULSD) for both distorted and undistorted images, we propose to represent line segments with the Bezier curve model. Then the line segment detection is tackled by the Bezier curve regression with an end-to-end network, which is model-free and without any undistortion preprocessing. Experimental results on the pinhole, fisheye, and spherical image datasets validate the superiority of the proposed ULSD to the SOTA methods both in accuracy and efficiency (40.6fps for pinhole images). The source code is available at https://github.com/lh9171338/Unified-LineSegment-Detection.

cs.CV↗

arXiv2020

Automatic Real-time Anomaly Detection for Autonomous Aerial Vehicles

The recent increase in the use of aerial vehicles raises concerns about the safety and reliability of autonomous operations. There is a growing need for methods to monitor the status of these aircraft and report any faults and anomalies to the safety pilot or to the autopilot to deal with the emergency situation. In this paper, we present a real-time approach using the Recursive Least Squares method to detect anomalies in the behavior of an aircraft. The method models the relationship between correlated input-output pairs online and uses the model to detect anomalies. The result is an easy-to-deploy anomaly detection method that does not assume a specific aircraft model and can detect many types of faults and anomalies in a wide range of autonomous aircraft. The experiments on this method show a precision of 88.23%, recall of 88.23%, and 86.36% accuracy for over 22 flight tests. The other contribution is providing a new fault detection open dataset for autonomous aircraft, which contains complete data and the ground truth for 22 fixed-wing flights with eight different types of mid-flight actuator failures to help future fault detection research for aircraft. The source code and the dataset can be accessed from https://theairlab.org/fault-detection/.

eess.SY↗

arXiv2020

TartanVO: A Generalizable Learning-based VO

We present the first learning-based visual odometry (VO) model, which generalizes to multiple datasets and real-world scenarios and outperforms geometry-based methods in challenging scenes. We achieve this by leveraging the SLAM dataset TartanAir, which provides a large amount of diverse synthetic data in challenging environments. Furthermore, to make our VO model generalize across datasets, we propose an up-to-scale loss function and incorporate the camera intrinsic parameters into the model. Experiments show that a single model, TartanVO, trained only on synthetic data, without any finetuning, can be generalized to real-world datasets such as KITTI and EuRoC, demonstrating significant advantages over the geometry-based methods on challenging trajectories. Our code is available at https://github.com/castacks/tartanvo.

cs.CV↗

arXiv2020

ALFA: A Dataset for UAV Fault and Anomaly Detection

We present a dataset of several fault types in control surfaces of a fixed-wing Unmanned Aerial Vehicle (UAV) for use in Fault Detection and Isolation (FDI) and Anomaly Detection (AD) research. Currently, the dataset includes processed data for 47 autonomous flights with 23 sudden full engine failure scenarios and 24 scenarios for seven other types of sudden control surface (actuator) faults, with a total of 66 minutes of flight in normal conditions and 13 minutes of post-fault flight time. It additionally includes many hours of raw data of fully-autonomous, autopilot-assisted and manual flights with tens of fault scenarios. The ground truth of the time and type of faults is provided in each scenario to enable evaluation of the methods using the dataset. We have also provided the helper tools in several programming languages to load and work with the data and to help the evaluation of a detection method using the dataset. A set of metrics is proposed to help to compare different methods using the dataset. Most of the current fault detection methods are evaluated in simulation and as far as we know, this dataset is the only one providing the real flight data with faults in such capacity. We hope it will help advance the state-of-the-art in Anomaly Detection or FDI research for Autonomous Aerial Vehicles and mobile robots to enhance the safety of autonomous and remote flight operations further. The dataset and the provided tools can be accessed from https://doi.org/10.1184/R1/12707963.

eess.SY↗

arXiv2020

A Robust Laser-Inertial Odometry and Mapping Method for Large-Scale Highway Environments

In this paper, we propose a novel laser-inertial odometry and mapping method to achieve real-time, low-drift and robust pose estimation in large-scale highway environments. The proposed method is mainly composed of four sequential modules, namely scan pre-processing module, dynamic object detection module, laser-inertial odometry module and laser mapping module. Scan pre-processing module uses inertial measurements to compensate the motion distortion of each laser scan. Then, the dynamic object detection module is used to detect and remove dynamic objects from each laser scan by applying CNN segmentation network. After obtaining the undistorted point cloud without moving objects, the laser inertial odometry module uses an Error State Kalman Filter to fuse the data of laser and IMU and output the coarse pose estimation at high frequency. Finally, the laser mapping module performs a fine processing step and the "Frame-to-Model" scan matching strategy is used to create a static global map. We compare the performance of our method with two state-ofthe-art methods, LOAM and SuMa, using KITTI dataset and real highway scene dataset. Experiment results show that our method performs better than the state-of-the-art methods in real highway environments and achieves competitive accuracy on the KITTI dataset.

cs.RO↗

arXiv2020

TartanAir: A Dataset to Push the Limits of Visual SLAM

We present a challenging dataset, the TartanAir, for robot navigation tasks and more. The data is collected in photo-realistic simulation environments with the presence of moving objects, changing light and various weather conditions. By collecting data in simulations, we are able to obtain multi-modal sensor data and precise ground truth labels such as the stereo RGB image, depth image, segmentation, optical flow, camera poses, and LiDAR point cloud. We set up large numbers of environments with various styles and scenes, covering challenging viewpoints and diverse motion patterns that are difficult to achieve by using physical data collection platforms. In order to enable data collection at such a large scale, we develop an automatic pipeline, including mapping, trajectory sampling, data processing, and data verification. We evaluate the impact of various factors on visual SLAM algorithms using our data. The results of state-of-the-art algorithms reveal that the visual SLAM problem is far from solved. Methods that show good performance on established datasets such as KITTI do not perform well in more difficult scenarios. Although we use the simulation, our goal is to push the limits of Visual SLAM algorithms in the real world by providing a challenging benchmark for testing new methods, while also using a large diverse training data for learning-based methods. Our dataset is available at \url{http://theairlab.org/tartanair-dataset}.

cs.RO↗

arXiv2020

Monocular Camera Localization in Prior LiDAR Maps with 2D-3D Line Correspondences

Light-weight camera localization in existing maps is essential for vision-based navigation. Currently, visual and visual-inertial odometry (VO\&VIO) techniques are well-developed for state estimation but with inevitable accumulated drifts and pose jumps upon loop closure. To overcome these problems, we propose an efficient monocular camera localization method in prior LiDAR maps using direct 2D-3D line correspondences. To handle the appearance differences and modality gaps between LiDAR point clouds and images, geometric 3D lines are extracted offline from LiDAR maps while robust 2D lines are extracted online from video sequences. With the pose prediction from VIO, we can efficiently obtain coarse 2D-3D line correspondences. Then the camera poses and 2D-3D correspondences are iteratively optimized by minimizing the projection error of correspondences and rejecting outliers. Experimental results on the EurocMav dataset and our collected dataset demonstrate that the proposed method can efficiently estimate camera poses without accumulated drifts or pose jumps in structured environments.

cs.CV↗

arXiv2020

RGB-D SLAM in Dynamic Environments Using Point Correlations

In this paper, a simultaneous localization and mapping (SLAM) method that eliminates the influence of moving objects in dynamic environments is proposed. This method utilizes the correlation between map points to separate points that are part of the static scene and points that are part of different moving objects into different groups. A sparse graph is first created using Delaunay triangulation from all map points. In this graph, the vertices represent map points, and each edge represents the correlation between adjacent points. If the relative position between two points remains consistent over time, there is correlation between them, and they are considered to be moving together rigidly. If not, they are considered to have no correlation and to be in separate groups. After the edges between the uncorrelated points are removed during point-correlation optimization, the remaining graph separates the map points of the moving objects from the map points of the static scene. The largest group is assumed to be the group of reliable static map points. Finally, motion estimation is performed using only these points. The proposed method was implemented for RGB-D sensors, evaluated with a public RGB-D benchmark, and tested in several additional challenging environments. The experimental results demonstrate that robust and accurate performance can be achieved by the proposed SLAM method in both slightly and highly dynamic environments. Compared with other state-of-the-art methods, the proposed method can provide competitive accuracy with good real-time performance.

cs.CV↗

arXiv2020

Visual Memorability for Robotic Interestingness via Unsupervised Online Learning

In this paper, we explore the problem of interesting scene prediction for mobile robots. This area is currently underexplored but is crucial for many practical applications such as autonomous exploration and decision making. Inspired by industrial demands, we first propose a novel translation-invariant visual memory for recalling and identifying interesting scenes, then design a three-stage architecture of long-term, short-term, and online learning. This enables our system to learn human-like experience, environmental knowledge, and online adaption, respectively. Our approach achieves much higher accuracy than the state-of-the-art algorithms on challenging robotic interestingness datasets.

cs.CV↗

arXiv2020

Learning Visuomotor Policies for Aerial Navigation Using Cross-Modal Representations

Machines are a long way from robustly solving open-world perception-control tasks, such as first-person view (FPV) aerial navigation. While recent advances in end-to-end Machine Learning, especially Imitation and Reinforcement Learning appear promising, they are constrained by the need of large amounts of difficult-to-collect labeled real-world data. Simulated data, on the other hand, is easy to generate, but generally does not render safe behaviors in diverse real-life scenarios. In this work we propose a novel method for learning robust visuomotor policies for real-world deployment which can be trained purely with simulated data. We develop rich state representations that combine supervised and unsupervised environment data. Our approach takes a cross-modal perspective, where separate modalities correspond to the raw camera data and the system states relevant to the task, such as the relative pose of gates to the drone in the case of drone racing. We feed both data modalities into a novel factored architecture, which learns a joint low-dimensional embedding via Variational Auto Encoders. This compact representation is then fed into a control policy, which we trained using imitation learning with expert trajectories in a simulator. We analyze the rich latent spaces learned with our proposed representations, and show that the use of our cross-modal architecture significantly improves control policy performance as compared to end-to-end learning or purely unsupervised feature extractors. We also present real-world results for drone navigation through gates in different track configurations and environmental conditions. Our proposed method, which runs fully onboard, can successfully generalize the learned representations and policies across simulation and reality, significantly outperforming baseline approaches. Supplementary video: https://youtu.be/VKc3A5HlUU8

cs.CV↗

arXiv2020

Deep-Learning Assisted High-Resolution Binocular Stereo Depth Reconstruction

This work presents dense stereo reconstruction using high-resolution images for infrastructure inspections. The state-of-the-art stereo reconstruction methods, both learning and non-learning ones, consume too much computational resource on high-resolution data. Recent learning-based methods achieve top ranks on most benchmarks. However, they suffer from the generalization issue due to lack of task-specific training data. We propose to use a less resource demanding non-learning method, guided by a learning-based model, to handle high-resolution images and achieve accurate stereo reconstruction. The deep-learning model produces an initial disparity prediction with uncertainty for each pixel of the down-sampled stereo image pair. The uncertainty serves as a self-measurement of its generalization ability and the per-pixel searching range around the initially predicted disparity. The downstream process performs a modified version of the Semi-Global Block Matching method with the up-sampled per-pixel searching range. The proposed deep-learning assisted method is evaluated on the Middlebury dataset and high-resolution stereo images collected by our customized binocular stereo camera. The combination of learning and non-learning methods achieves better performance on 12 out of 15 cases of the Middlebury dataset. In our infrastructure inspection experiments, the average 3D reconstruction error is less than 0.004m.

cs.CV↗

arXiv2019

Line-based Camera Pose Estimation in Point Cloud of Structured Environments

Accurate registration of 2D imagery with point clouds is a key technology for image-LiDAR point cloud fusion, camera to laser scanner calibration and camera localization. Despite continuous improvements, automatic registration of 2D and 3D data without using additional textured information still faces great challenges. In this paper, we propose a new 2D-3D registration method to estimate 2D-3D line feature correspondences and the camera pose in untextured point clouds of structured environments. Specifically, we first use geometric constraints between vanishing points and 3D parallel lines to compute all feasible camera rotations. Then, we utilize a hypothesis testing strategy to estimate the 2D-3D line correspondences and the translation vector. By checking the consistency with computed correspondences, the best rotation matrix can be found. Finally, the camera pose is further refined using non-linear optimization with all the 2D-3D line correspondences. The experimental results demonstrate the effectiveness of the proposed method on the synthetic and real dataset (outdoors and indoors) with repeated structures and rapid depth changes.

cs.CV↗

arXiv2019

LiDAR Enhanced Structure-from-Motion

Although Structure-from-Motion (SfM) as a maturing technique has been widely used in many applications, state-of-the-art SfM algorithms are still not robust enough in certain situations. For example, images for inspection purposes are often taken in close distance to obtain detailed textures, which will result in less overlap between images and thus decrease the accuracy of estimated motion. In this paper, we propose a LiDAR-enhanced SfM pipeline that jointly processes data from a rotating LiDAR and a stereo camera pair to estimate sensor motions. We show that incorporating LiDAR helps to effectively reject falsely matched images and significantly improve the model consistency in large-scale environments. Experiments are conducted in different environments to test the performance of the proposed pipeline and comparison results with the state-of-the-art SfM algorithms are reported.

cs.RO↗

arXiv2019

Can a Robot Become a Movie Director? Learning Artistic Principles for Aerial Cinematography

Aerial filming is constantly gaining importance due to the recent advances in drone technology. It invites many intriguing, unsolved problems at the intersection of aesthetical and scientific challenges. In this work, we propose a deep reinforcement learning agent which supervises motion planning of a filming drone by making desirable shot mode selections based on aesthetical values of video shots. Unlike most of the current state-of-the-art approaches that require explicit guidance by a human expert, our drone learns how to make favorable viewpoint selections by experience. We propose a learning scheme that exploits aesthetical features of retrospective shots in order to extract a desirable policy for better prospective shots. We train our agent in realistic AirSim simulations using both a hand-crafted reward function as well as reward from direct human input. We then deploy the same agent on a real DJI M210 drone in order to test the generalization capability of our approach to real world conditions. To evaluate the success of our approach in the end, we conduct a comprehensive user study in which participants rate the shot quality of our methods. Videos of the system in action can be seen at https://youtu.be/qmVw6mfyEmw.

cs.RO↗

arXiv2019

Autonomous Aerial Cinematography In Unstructured Environments With Learned Artistic Decision-Making

Aerial cinematography is revolutionizing industries that require live and dynamic camera viewpoints such as entertainment, sports, and security. However, safely piloting a drone while filming a moving target in the presence of obstacles is immensely taxing, often requiring multiple expert human operators. Hence, there is demand for an autonomous cinematographer that can reason about both geometry and scene context in real-time. Existing approaches do not address all aspects of this problem; they either require high-precision motion-capture systems or GPS tags to localize targets, rely on prior maps of the environment, plan for short time horizons, or only follow artistic guidelines specified before flight. In this work, we address the problem in its entirety and propose a complete system for real-time aerial cinematography that for the first time combines: (1) vision-based target estimation; (2) 3D signed-distance mapping for occlusion estimation; (3) efficient trajectory optimization for long time-horizon camera motion; and (4) learning-based artistic shot selection. We extensively evaluate our system both in simulation and in field experiments by filming dynamic targets moving through unstructured environments. Our results indicate that our system can operate reliably in the real world without restrictive assumptions. We also provide in-depth analysis and discussions for each module, with the hope that our design tradeoffs can generalize to other related applications. Videos of the complete system can be found at: https://youtu.be/ookhHnqmlaU.

cs.RO↗