arXiv subjects

Sebastian Bustingorry

Publications and source records attributed to Sebastian Bustingorry.

At least 19 recordsLinked to original sources

arXiv2023

Domain-wall Magnetic-texture dependent Creep Motion driven by Spin-transfer Torques

We explore the contributions of adiabatic and non-adiabatic spin-transfer torques (STT) of a spin-polarized current to the thermally activated creep motion of domain-walls in a thin (Ga,Mn)(As,P) film with perpendicular anisotropy. For a domain-wall transverse to current, the non-adiabatic STT is found to act as an external magnetic field. Close to the compensation between these two terms, the adiabatic contribution is strongly enhanced. The domain-wall velocity may be both increased or reduced by the adiabatic STT, which we associate to variations of creep pinning energy barrier with domain-wall magnetic texture. Far from compensation, the contribution of adiabatic STT is negligible. Field and current driven domain-wall motion present common universal behaviors described by the quenched Edwards Wilkinson universality class.

cond-mat.mes-hall↗

arXiv2023

Continuum of Metastable Helical States in Monoaxial Chiral Magnets: Effect of the Boundary Conditions

In a recent publication we showed that a monoaxial chiral magnet has a continuum of metastable helical states differing by the helix wave number. This intringuing result was obtained for the case of an infinite magnet (or of a magnet with periodic boundary conditions). However, it has been pointed out that in a real magnet only one of these states is compatible with the boundary conditions, because the helix wave number is determined by the surface chiral twist. Thus, only one of the continuum of states is physically realizable. This is true for the case of a chiral magnet in contact with a non magnetic medium (vacuum or air, for instance), but the boundary conditions can be altered by setting the chiral magnet in contact with another magnetic medium, which may be able to absorb the surface chiral twist. We show here that this is indeed the case by studying a composite magnet system, which consists of one monoaxial chiral magnet of rectangular parallelepiped shape which has two similar uniaxial ferromagnets attached to each of the faces that are perpendicular to the chiral axis. We show that, in the case of zero applied field, this composite system has a number of metastable helical states which is proportional to the length L0 of the chiral magnet along the chiral axis, and that the results of our previous publication are recovered when L0 tends to infinity.

cond-mat.mes-hall↗

arXiv2021

A numerical study of the statistics of roughness parameters for fluctuating interfaces

Self-affine rough interfaces are ubiquitous in experimental systems, and display characteristic scaling properties as a signature of the nature of disorder in their supporting medium, i.e. of the statistical features of its heterogeneities. Different methods have been used to extract roughness information from such self-affine structures, and in particular their scaling exponents and associated prefactors. Notably, for an experimental characterization of roughness features, it is of paramount importance to properly assess sample-to-sample fluctuations of roughness parameters. Here, by performing scaling analysis based on displacement correlation functions in real and reciprocal space, we compute statistical properties of the roughness parameters. As an ideal, artifact-free reference case study and particularly targeting finite-size systems, we consider three cases of numerically simulated one-dimensional interfaces: (i) elastic lines under thermal fluctuations and free of disorder, (ii) directed polymers in equilibrium with a disordered energy landscape, and (iii) elastic lines in the critical depinning state when the external applied driving force equals the depinning force set by disorder. Our results shows that sample-to-sample fluctuations are rather large when measuring the roughness exponent. These fluctuations are also relevant for roughness amplitudes. Therefore a minimum of independent interface realizations (at least a few tens in our numerical simulations) should be used to guarantee sufficient statistical averaging, an issue often overlooked in experimental reports.

cond-mat.dis-nn↗

arXiv2021

Field-dependent roughness of moving domain walls in a Pt/Co/Pt magnetic thin film

The creep motion of domain walls driven by external fields in magnetic thin films is described by universal features related to the underlying depinning transition. One key parameter in this description is the roughness exponent characterizing the growth of fluctuations of the domain wall position with its longitudinal length scale. The roughness amplitude, which gives information about the scale of fluctuations, however, has received less attention. Albeit their relevance, experimental reports of the roughness parameters, both exponent and amplitude, are scarce. We report here experimental values of the roughness parameters for different magnetic field intensities in the creep regime at room temperature for a Pt/Co/Pt thin film. The mean value of the roughness exponent is $\zeta = 0.74$, and we show that it can be rationalized as an effective value in terms of the known universal values corresponding to the depinning and thermal cases. In addition, it is shown that the roughness amplitude presents a significant increase with decreasing field. These results contribute to the description of domain wall motion in disordered thin magnetic systems.

cond-mat.dis-nn↗

arXiv2021

Domain-wall roughness in GdFeCo thin films: crossover length scales and roughness exponents

Domain-wall dynamics and spatial fluctuations are closely related to each other and to universal features of disordered systems. Experimentally measured roughness exponents characterizing spatial fluctuations have been reported for magnetic thin films, with values generally different from those predicted by the equilibrium, depinning and thermal reference states. Here, we study the roughness of domain walls in GdFeCo thin films over a large range of magnetic field and temperature. Our analysis is performed in the framework of a model considering length-scale crossovers between the reference states, which is shown to bridge the differences between experimental results and theoretical predictions. We also quantify for the first time the size of the depinning avalanches below the depinning field at finite temperatures.

cond-mat.dis-nn↗

arXiv2021

Universal Critical Exponents of the Magnetic Domain Wall Depinning Transition

Magnetic field driven domain wall dynamics in a ferrimagnetic GdFeCo thin film with perpendicular magnetic anisotropy is studied using low temperature magneto-optical Kerr microscopy. Measurements performed in a practically athermal condition allow for the direct experimental determination of the velocity ($ \beta = 0.30 \pm 0.03 $) and correlation length ($ \nu = 1.3 \pm 0.3 $) exponents of the depinning transition. The whole family of exponents characterizing the transition is deduced, providing evidence that the depinning of magnetic domain walls is better described by the quenched Edwards-Wilkinson universality class.

cond-mat.mtrl-sci↗

arXiv2020

Dynamics of chiral solitons driven by polarized currents in monoaxial helimagnets

Chiral solitons are one dimensional localized magnetic structures that are metastable in some ferromagnetic systems with Dzyaloshinskii-Moriya interactions and/or uniaxial magnetic anisotropy. Though topological textures in general provide a very interesting playground for new spintronics phenomena, how to properly create and control single chiral solitons is still unclear. We show here that chiral solitons in monoaxial helimagnets, characterized by a uniaxial Dzyaloshinskii-Moriya interaction, can be stabilized with external magnetic fields. Once created, the soliton moves steadily in response to a polarized electric current, provided the induced spin-transfer torque has a dissipative (nonadiabatic) component. The structure of the soliton depends on the applied current density in such a way that steady motion exists only if the applied current density is lower than a critical value, beyond which the soliton is no longer stable.

cond-mat.str-el↗

arXiv2019

Tuning Ginzburg-Landau theory to quantitatively study thin ferromagnetic materials

Along with experiments, numerical simulations are key to gaining insight into the underlying mechanisms governing domain wall motion in thin ferromagnetic systems. However, a direct comparison between numerical simulation of model systems and experimental results still represents a great challenge. Here, we present a tuned Ginzburg-Landau model to quantitatively study the dynamics of domain walls in quasi two-dimensional ferromagnetic systems with perpendicular magnetic anisotropy. This model incorporates material and experimental parameters and the micromagnetic prescription for thermal fluctuations, allowing us to perform material-specific simulations and at the same time recover universal features. We show that our model quantitatively reproduces previous experimental velocity-field data in the archetypal perpendicular magnetic anisotropy Pt/Co/Pt ultra-thin films in the three dynamical regimes of domain wall motion (creep, depinning and flow). In addition, we present a statistical analysis of the domain wall width parameter, showing that our model can provide detailed nano-scale information while retaining the complex behavior of a statistical disordered model.

cond-mat.dis-nn↗

arXiv2019

Transient magnetic domain wall AC dynamics by means of MOKE microscopy

The domain wall response under constant external magnetic fields reveals a complex behavior where sample disorder plays a key role. Furthermore, the response to alternating magnetic fields has only been explored in limited cases and analyzed in terms of the constant field solution. Here we unveil phenomena in the evolution of magnetic domain walls under the application of alternating magnetic fields within the creep regime, well beyond a small fuctuation limit of the domain wall position. Magnetic field pulses were applied in ultra-thin ferromagnetic films with perpendicular anisotropy, and the resulting domain wall evolution was characterized by polar magneto-optical Kerr effect microscopy. Whereas the DC characterization is well predicted by the elastic interface model, striking unexpected features are observed under the application of alternating square pulses: magneto-optical images show that after a transient number of cycles, domain walls evolve toward strongly distorted shapes concomitantly with a modification of domain area. The morphology of domain walls is characterized with a roughness exponent when possible and contrasted with alternative observables which result to be more suitable for the characterization of this transient evolution. The final stationary convergence as well as the underlying physics is discussed.

cond-mat.stat-mech↗

arXiv2018

Intermittent collective dynamics of domain walls in the creep regime

We study the ultra slow domain wall motion in ferromagnetic thin films driven by a weak magnetic field. Using time resolved magneto-optical Kerr effect microscopy, we access to the statistics of the intermittent thermally activated domain wall jumps between deep metastable states. Our observations are consistent with the existence of creep avalanches: roughly independent clusters with broad size and ignition waiting-time distributions, each one composed by a large number of spatio-temporally correlated thermally activated elementary events. Moreover, we evidence that the large scale geometry of domain walls is better described by depinning rather than equilibrium universal exponents.

cond-mat.dis-nn↗

arXiv2018

Magnetic domain wall creep and depinning: a scalar field model approach

Magnetic domain wall motion is at the heart of new magneto-electronic technologies and hence the need for a deeper understanding of domain wall dynamics in magnetic systems. In this context, numerical simulations using simple models can capture the main ingredients responsible for the complex observed domain wall behavior. We present a scalar-field model for the magnetization dynamics of quasi-two-dimensional systems with a perpendicular easy axis of magnetization which allows a direct comparison with typical experimental protocols, used in polar magneto-optical Kerr effect microscopy experiments. We show that the thermally activated creep and depinning regimes of domain wall motion can be reached, and the effect of different quenched disorder implementations can be assessed with the model. In particular, we show that the depinning field increases with the mean grain size of a Voronoi tessellation model for the disorder.

cond-mat.mes-hall↗

arXiv2017

Pinning of Domain Walls in thin Ferromagnetic Films

We present a quantitative investigation of magnetic domain wall pinning in thin magnets with perpendicular anisotropy. A self-consistent description exploiting the universal features of the depinning and thermally activated sub-threshold creep regimes observed in the field driven domain wall velocity, is used to determine the effective pinning parameters controlling the domain wall dynamics: the effective height of pinning barriers, the depinning threshold, and the velocity at depinning. Within this framework, the analysis of results published in the literature allows for a quantitative comparison of pinning properties for a set of magnetic materials in a wide temperature range. On the basis of scaling arguments, the microscopic parameters controlling the pinning: the correlation length of pinning, the collectively pinned domain wall length (Larkin length) and the strength of pinning disorder, are estimated from the effective pinning and the micromagnetic parameters. The analysis of thermal effects reveals a crossover between different pinning length scales and strengths at low reduced temperature.

cond-mat.mes-hall↗

arXiv2017

Excess velocity of magnetic domain walls close to the depinning field

Magnetic field driven domain wall velocities in [Co/Ni] based multilayers thin films have been measured using polar magneto-optic Kerr effect microscopy. The low field results are shown to be consistent with the universal creep regime of domain wall motion, characterized by a stretched exponential growth of the velocity with the inverse of the applied field. Approaching the depinning field from below results in an unexpected excess velocity with respect to the creep law. We analyze these results using scaling theory to show that this speeding up of domain wall motion can be interpreted as due to the increase of the size of the deterministic relaxation close to the depinning transition. We propose a phenomenological model which allows to accurately fit the observed excess velocity and to obtain characteristic values for the depinning field $H_d$, the depinning temperature $T_d$, and the characteristic velocity scale $v_0$ for each sample.

cond-mat.dis-nn↗

arXiv2016

Universal Depinning Transition of Domain Walls in Ultrathin Ferromagnets

We present a quantitative and comparative study of magnetic field driven domain wall depinning transition in different ferromagnetic ultrathin films over a wide range of temperature. We reveal a universal scaling function accounting for both drive and thermal effects on the depinning transition, including critical exponents. The consistent description we obtain for both the depinning and subthreshold thermally activated creep motion should shed light on the universal glassy dynamics of thermally fluctuating elastic objects pinned by disordered energy landscapes.

cond-mat.dis-nn↗

arXiv2016

Universal pinning energy barrier for driven domain walls in thin ferromagnetic films

We report a comparative study of magnetic field driven domain wall motion in thin films made of different magnetic materials for a wide range of field and temperature. The full thermally activated creep motion, observed below the depinning threshold, is shown to be described by a unique universal energy barrier function. Our findings should be relevant for other systems whose dynamics can be modeled by elastic interfaces moving on disordered energy landscapes.

cond-mat.mes-hall↗

arXiv2014

Critical behavior and out-of-equilibrium dynamics of a two-dimensional Ising model with dynamic couplings

We study the critical behavior and the out-of-equilibrium dynamics of a two-dimensional Ising model with non-static interactions. In our model, bonds are dynamically changing according to a majority rule depending on the set of closest neighbors of each spin pair, which prevents the system from ordering in a full ferromagnetic or antiferromagnetic state. Using a parallel-tempering Monte Carlo algorithm, we find that the model undergoes a continuous phase transition at finite temperature, which belongs to the Ising universality class. The properties of the bond structure and the ground-state entropy are also studied. Finally, we analyze the out-of-equilibrium dynamics which displays typical glassy characteristics at a temperature well below the critical one.

cond-mat.stat-mech↗

arXiv2012

Finite-temperature and finite-time scaling of the directed polymer free-energy with respect to its geometrical fluctuations

We study the fluctuations of the directed polymer in 1+1 dimensions in a Gaussian random environment with a finite correlation length {\xi} and at finite temperature. We address the correspondence between the geometrical transverse fluctuations of the directed polymer, described by its roughness, and the fluctuations of its free-energy, characterized by its two-point correlator. Analytical arguments are provided in favor of a generic scaling law between those quantities, at finite time, non-vanishing {\xi} and explicit temperature dependence. Numerical results are in good agreement both for simulations on the discrete directed polymer and on a continuous directed polymer (with short-range correlated disorder). Applications to recent experiments on liquid crystals are discussed.

cond-mat.stat-mech↗

arXiv2011

Maximum relative height of elastic interfaces in random media

The distribution of the maximal relative height (MRH) of self-affine one-dimensional elastic interfaces in a random potential is studied. We analyze the ground state configuration at zero driving force, and the critical configuration exactly at the depinning threshold, both for the random-manifold and random-periodic universality classes. These configurations are sampled by exact numerical methods, and their MRH distributions are compared with those with the same roughness exponent and boundary conditions, but produced by independent Fourier modes with normally distributed amplitudes. Using Pickands' theorem we derive an exact analytical description for the right tail of the latter. After properly rescaling the MRH distributions we find that corrections from the Gaussian independent modes approximation are in general small, as previously found for the average width distribution of depinning configurations. In the large size limit all corrections are finite except for the ground-state in the random-periodic class whose MRH distribution becomes, for periodic boundary conditions, indistinguishable from the Airy distribution. We find that the MRH distributions are, in general, sensitive to changes of boundary conditions.

cond-mat.stat-mech↗