arXiv subjects

Sean Dewar

Publications and source records attributed to Sean Dewar.

At least 37 records · Page 2Linked to original sources

arXiv2025

A tropical approach to rigidity: counting realisations of frameworks

A realisation of a graph in the plane as a bar-joint framework is rigid if there are finitely many other realisations, up to isometries, with the same edge lengths. Each of these finitely-many realisations can be seen as a solution to a system of quadratic equations prescribing the distances between pairs of points. For generic realisations, the size of the solution set depends only on the underlying graph so long as we allow for complex solutions. We provide a characterisation of the realisation number - that is the cardinality of this complex solution set - of a minimally rigid graph. Our characterisation uses tropical geometry to express the realisation number as an intersection of Bergman fans of the graphic matroid. As a consequence, we derive a combinatorial upper bound on the realisation number involving the Tutte polynomial. Moreover, we provide computational evidence that our upper bound is usually an improvement on the mixed volume bound.

math.CO↗

arXiv2024

Constructing reflection-symmetric flexible realisations of graphs

We study reflection-symmetric realisations of symmetric graphs in the plane that allow a continuous symmetry and edge-length preserving deformation. To do so, we identify a necessary combinatorial condition on graphs with reflection-symmetric flexible realisations. This condition is based on a specific type of edge colouring, where edges are assigned one of three colours in a symmetric way. From some of these colourings we also construct concrete reflection-symmetric realisations with their corresponding symmetry preserving motion. We study also a specific class of reflection-symmetric realisations consisting of triangles and parallelograms.

math.CO↗

arXiv2024

Edge-length preserving embeddings of graphs between normed spaces

The concept of graph flattenability, initially formalized by Belk and Connelly and later expanded by Sitharam and Willoughby, extends the question of embedding finite metric spaces into a given normed space. A finite simple graph $G=(V,E)$ is said to be $(X,Y)$-flattenable if any set of induced edge lengths from an embedding of $G$ into a normed space $Y$ can also be realised by an embedding of $G$ into a normed space $X$. This property, being minor-closed, can be characterized by a finite list of forbidden minors. Following the establishment of fundamental results about $(X,Y)$-flattenability, we identify sufficient conditions under which it implies independence with respect to the associated rigidity matroids for $X$ and $Y$. We show that the spaces $\ell_2$ and $\ell_\infty$ serve as two natural extreme spaces of flattenability and discuss $(X, \ell_p )$-flattenability for varying $p$. We provide a complete characterization of $(X,Y)$-flattenable graphs for the specific case when $X$ is 2-dimensional and $Y$ is infinite-dimensional.

math.MG↗

arXiv2024

Extremal decompositions of tropical varieties and relations with rigidity theory

Extremality and irreducibility constitute fundamental concepts in mathematics, particularly within tropical geometry. While extremal decomposition is typically computationally hard, this article presents a fast algorithm for identifying the extremal decomposition of tropical varieties with rational balanced weightings. Additionally, we explore connections and applications related to rigidity theory. In particular, we prove that a tropical hypersurface is extremal if and only if it has a unique reciprocal diagram up to homothety.

math.AG↗

arXiv2024

Rigidity of nearly planar classes of graphs

We explore the rigidity of generic frameworks in 3-dimensions whose underlying graph is close to being planar. Specifically we consider apex graphs, edge-apex graphs and their variants and prove independence results in the generic 3-dimensional rigidity matroid adding to the short list of graph classes for which 3-dimensional rigidity is understood. We then analyse global rigidity for these graph classes and use our results to deduce bounds on the maximum likelihood threshold of graphs in these nearly planar classes.

math.CO↗

arXiv2024

Rigid frameworks with dilation constraints

We consider the rigidity and global rigidity of bar-joint frameworks in Euclidean $d$-space under additional dilation constraints in specified coordinate directions. In this setting we obtain a complete characterisation of generic rigidity. We then consider generic global rigidity. In particular, we provide an algebraic sufficient condition and a weak necessary condition. We also construct a large family of globally rigid frameworks and conjecture a combinatorial characterisation when most coordinate directions have dilation constraints.

math.CO↗

arXiv2024

Classifying the globally rigid edge-transitive graphs and distance-regular graphs in the plane

A graph is said to be globally rigid if almost all embeddings of the graph's vertices in the Euclidean plane will define a system of edge-length equations with a unique (up to isometry) solution. In 2007, Jackson, Servatius and Servatius characterised exactly which vertex-transitive graphs are globally rigid solely by their degree and maximal clique number, two easily computable parameters for vertex-transitive graphs. In this short note we will extend this characterisation to all graphs that are determined by their automorphism group. We do this by characterising exactly which edge-transitive graphs and distance-regular graphs are globally rigid by their minimal and maximal degrees.

math.CO↗

arXiv2024

Flexible placements of periodic graphs in the plane

Given a periodic graph, we wish to determine via combinatorial methods whether it has periodic embeddings in the plane that -- via motions that preserve edge-lengths and periodicity -- can be continuously deformed into another non-congruent embedding of the graph. By introducing NBAC-colourings for the corresponding quotient gain graphs, we identify which periodic graphs have flexible embeddings in the plane when the lattice of periodicity is fixed. We further characterise with NBAC-colourings which 1-periodic graphs have flexible embeddings in the plane with a flexible lattice of periodicity, and characterise in special cases which 2-periodic graphs have flexible embeddings in the plane with a flexible lattice of periodicity.

math.CO↗

arXiv2024

Which graphs are rigid in $\ell_p^d$?

We present three results which support the conjecture that a graph is minimally rigid in $d$-dimensional $\ell_p$-space, where $p\in (1,\infty)$ and $p\not=2$, if and only if it is $(d,d)$-tight. Firstly, we introduce a graph bracing operation which preserves independence in the generic rigidity matroid when passing from $\ell_p^d$ to $\ell_p^{d+1}$. We then prove that every $(d,d)$-sparse graph with minimum degree at most $d+1$ and maximum degree at most $d+2$ is independent in $\ell_p^d$. Finally, we prove that every triangulation of the projective plane is minimally rigid in $\ell_p^3$. A catalogue of rigidity preserving graph moves is also provided for the more general class of strictly convex and smooth normed spaces and we show that every triangulation of the sphere is independent for 3-dimensional spaces in this class.

math.MG↗

arXiv2024

Identifying contact graphs of sphere packings with generic radii

Ozkan et al. conjectured that any packing of $n$ spheres with generic radii will be stress-free, and hence will have at most $3n-6$ contacts. In this paper we prove that this conjecture is true for any sphere packing with contact graph of the form $G \oplus K_2$, i.e., the graph formed by connecting every vertex in a graph $G$ to every vertex in the complete graph with two vertices. We also prove the converse of the conjecture holds in this special case: specifically, a graph $G \oplus K_2$ is the contact graph of a generic radii sphere packing if and only if $G$ is a penny graph with no cycles.

math.CO↗

arXiv2023

Maximum likelihood thresholds via graph rigidity

The maximum likelihood threshold (MLT) of a graph $G$ is the minimum number of samples to almost surely guarantee existence of the maximum likelihood estimate in the corresponding Gaussian graphical model. We give a new characterization of the MLT in terms of rigidity-theoretic properties of $G$ and use this characterization to give new combinatorial lower bounds on the MLT of any graph. We use the new lower bounds to give high-probability guarantees on the maximum likelihood thresholds of sparse Erd{ö}s-Rényi random graphs in terms of their average density. These examples show that the new lower bounds are within a polylog factor of tight, where, on the same graph families, all known lower bounds are trivial. Based on computational experiments made possible by our methods, we conjecture that the MLT of an Erd{ö}s-Rényi random graph is equal to its generic completion rank with high probability. Using structural results on rigid graphs in low dimension, we can prove the conjecture for graphs with MLT at most $4$ and describe the threshold probability for the MLT to switch from $3$ to $4$. We also give a geometric characterization of the MLT of a graph in terms of a new "lifting" problem for frameworks that is interesting in its own right. The lifting perspective yields a new connection between the weak MLT (where the maximum likelihood estimate exists only with positive probability) and the classical Hadwiger-Nelson problem.

math.CO↗

arXiv2023

How many contacts can exist between oriented squares of various sizes?

A homothetic packing of squares is any set of various-size squares with the same orientation where no two squares have overlapping interiors. If all $n$ squares have the same size then we can have up to roughly $4n$ contacts by arranging the squares in a grid formation. The maximum possible number of contacts for a set of $n$ squares will drop drastically, however, if the size of each square is chosen more-or-less randomly. In the following paper we describe a necessary and sufficient condition for determining if a set of $n$ squares with fixed sizes can be arranged into a homothetic square packing with more than $2n-2$ contacts. Using this, we then prove that any (possibly not homothetic) packing of $n$ squares will have at most $2n-2$ face-to-face contacts if the various widths of the squares do not satisfy a finite set of linear equations.

math.CO↗

arXiv2023

The number of realisations of a rigid graph in Euclidean and spherical geometries

A graph is $d$-rigid if for any generic realisation of the graph in $\mathbb{R}^d$ (equivalently, the $d$-dimensional sphere $\mathbb{S}^d$), there are only finitely many non-congruent realisations in the same space with the same edge lengths. By extending this definition to complex realisations in a natural way, we define $c_d(G)$ to be the number of equivalent $d$-dimensional complex realisations of a $d$-rigid graph $G$ for a given generic realisation, and $c^*_d(G)$ to be the number of equivalent $d$-dimensional complex spherical realisations of $G$ for a given generic spherical realisation. Somewhat surprisingly, these two realisation numbers are not always equal. Recently developed algorithms for computing realisation numbers determined that the inequality $c_2(G) \leq c_2^*(G)$ holds for any minimally 2-rigid graph $G$ with 12 vertices or less. In this paper we confirm that, for any dimension $d$, the inequality $c_d(G) \leq c_d^*(G)$ holds for every $d$-rigid graph $G$. This result is obtained via new techniques involving coning, the graph operation that adds an extra vertex adjacent to all original vertices of the graph.

math.CO↗

arXiv2023

On the uniqueness of collections of pennies and marbles

In this note we study the uniqueness problem for collections of pennies and marbles. More generally, consider a collection of unit $d$-spheres that may touch but not overlap. Given the existence of such a collection, one may analyse the contact graph of the collection. In particular we consider the uniqueness of the collection arising from the contact graph. Using the language of graph rigidity theory, we prove a precise characterisation of uniqueness (global rigidity) in dimensions 2 and 3 when the contact graph is additionally chordal. We then illustrate a wide range of examples in these cases. That is, we illustrate collections of marbles and pennies that can be perturbed continuously (flexible), are locally unique (rigid) and are unique (globally rigid). We also contrast these examples with the usual generic setting of graph rigidity.

math.CO↗

arXiv2023

Rigid graphs in cylindrical normed spaces

We characterise rigid graphs for cylindrical normed spaces $Z=X\oplus_\infty \mathbb{R}$ where $X$ is a finite dimensional real normed linear space and $Z$ is endowed with the product norm. In particular, we obtain purely combinatorial characterisations of minimal rigidity for a large class of 3-dimensional cylindrical normed spaces; for example, when $X$ is an $\ell_p$-plane with $p\in (1,\infty)$. We combine these results with recent work of Cros et al. to characterise rigid graphs in the 4-dimensional cylindrical space $(\mathbb{R}^2\oplus_1\mathbb{R})\oplus_\infty\mathbb{R}$. These are among the first combinatorial characterisations of rigid graphs in normed spaces of dimension greater than 2. Examples of rigid graphs are presented and algorithmic aspects are discussed.

math.MG↗

arXiv2022

Computing maximum likelihood thresholds using graph rigidity

math.CO↗

arXiv2022

Flexing infinite frameworks with applications to braced Penrose tilings

A planar framework -- a graph together with a map of its vertices to the plane -- is flexible if it allows a continuous deformation preserving the distances between adjacent vertices. Extending a recent previous result, we prove that a connected graph with a countable vertex set can be realized as a flexible framework if and only if it has a so-called NAC-coloring. The tools developed to prove this result are then applied to frameworks where every 4-cycle is a parallelogram, and countably infinite graphs with $n$-fold rotational symmetry. With this, we determine a simple combinatorial characterization that determines whether the 1-skeleton of a Penrose rhombus tiling with a given set of braced rhombi will have a flexible motion, and also whether the motion will preserve 5-fold rotational symmetry.

math.CO↗

arXiv2022

Uniquely realisable graphs in analytic normed planes

A bar-joint framework $(G,p)$ in the Euclidean space $\mathbb{E}^d$ is globally rigid if it is the unique realisation, up to rigid congruences, of $G$ in $\mathbb{E}^d$ with the edge lengths of $(G,p)$. Building on key results of Hendrickson and Connelly, Jackson and Jordán gave a complete combinatorial characterisation of when a generic framework is global rigidity in $\mathbb{E}^2$. We prove an analogous result when the Euclidean norm is replaced by any norm that is analytic on $\mathbb{R}^2 \setminus \{0\}$. More precisely, we show that a graph $G=(V,E)$ is globally rigid in a non-Euclidean analytic normed plane if and only if $G$ is 2-connected and $G-e$ contains 2 edge-disjoint spanning trees for all $e\in E$. The main technical tool is a recursive construction of 2-connected and redundantly rigid graphs in analytic normed planes. We also obtain some sufficient conditions for global rigidity as corollaries of our main result and prove that the analogous necessary conditions hold in $d$-dimensional analytic normed spaces.

math.CO↗