arXiv subjects

Satoshi Awaji

Publications and source records attributed to Satoshi Awaji.

At least 19 recordsLinked to original sources

arXiv2025

Asymmetric stress engineering of dense dislocations in brittle superconductors for strong vortex pinning

Large lossless currents in high-temperature superconductors (HTS) critically rely on dense defects with suitable size and dimensionality to pin vortices, with dislocations being particularly effective due to their one-dimensional geometry to interact extensively with vortex lines. However, in non-metallic compounds such as HTS with rigid lattices, conventional deformation methods typically lead to catastrophic fracture rather than dislocation-mediated plasticity, making it a persistent challenge to introduce dislocations at high density. Here, we propose an asymmetric stress field strategy using extrusion to directly nucleate a high-density of dislocations in HTS by activating shear-driven lattice slip and twisting under superimposed hydrostatic compression. As demonstrated in iron-based superconductors (IBS), atomic displacements of nearly one angstrom trigger the formation of tilted dislocation lines with a density approaching that of metals. With further structural refinement, these dislocations serve as strong pinning centers that lead to a fivefold enhancement in the current-carrying capacity of IBS at 33 T, along with low anisotropy and a large irreversibility field. This work not only establishes a scalable route to engineer pinning landscapes in HTS, but also offers a generalizable framework for manipulating dislocation structures in rigid crystalline systems.

cond-mat.supr-con↗

arXiv2024

Doping Dependence of Upper Critical Field of High-Tc Cuprate Bi2+xSr2-xCaCu2O8+d Estimated from Irreversibility Field at Zero Temperature

We investigated the temperature (T) dependence of the irreversibility field Hirr(T) in high-critical-temperature cuprate Bi2+xSr2-xCa1-yYyCu2O8+d (Bi-2212) single crystals over a wide range of hole doping level (p). Hirr(T) was evaluated by measuring the magnetization hysteresis loop. The value of Hirr(T) extrapolated to T = 0 K [Hirr(0)], is either equal to or sets the lower boundary for the upper critical field at T = 0 K [Hc2(0)]. Tc shows a parabolic p-dependence (peak at p = 0.16), whereas Hirr(0) increases monotonically with p by approximately one order of magnitude, from 19 T for the most underdoped sample (p = 0.065, Tc = 24 K) to 209 T for the most overdoped sample (p = 0.200, Tc = 75 K). The present results qualitatively agree with Hc2(0) values evaluated from the specific heat measurements. The observed p-dependence of Hirr(0) in Bi-2212 is distinct from those in YBa2Cu3O7-d and HgBa2CuO6+d, in which a pronounced dip structure appears in the underdoped region. Considering that the dip structures observed in these two systems are likely associated with the formation of competing orders (most likely field-induced charge orders), the present results indicate that the influence of the competing order in Bi-2212 is less prominent than that in the other two systems.

cond-mat.supr-con↗

arXiv2024

Single Crystal Growth and Transport Properties of van der Waals Materials $AB$Te$_\mathbf{4}$ ($A/B$ = Ti, Zr, Hf)

Monolayers of $AB$Te$_4$ ($A$/$B$ = Ti, Zr, Hf) were theoretically predicted to be two-dimensional topological insulators, but little has been known about the physical properties of these compounds. Here, we report on the single crystal growth, bulk transport properties, and band structure calculations of these compounds. The magnetotransport properties indicate that all three compounds are multi-carrier systems. The experimental results of ZrTiTe$_4$ and HfTiTe$_4$ can be well fitted by the multi-carrier formula assuming two types of carriers, while three carrier components were necessary for HfZrTe$_4$. Interestingly, one of the carrier mobilities of HfZrTe$_4$ exceeded 1000 cm$^2$V$^{-1}$s$^{-1}$, which was nearly one order in magnitude larger than the carrier mobilities of ZrTiTe$_4$ and HfTiTe$_4$. Our band structure calculations showed that all three compounds are semimetals consistent with the magnetotransport properties. The band structure around the $\Gamma$-point of HfZrTe$_4$ exhibits features that are distinct from the other two compounds, which is likely the reason of the different carrier properties.

cond-mat.mtrl-sci↗

arXiv2023

Longitudinal Magnetoresistance in YBa$_2$Cu$_3$O$_7$ at High Magnetic Fields of up to 100 T

The investigation of transport characteristics in high-temperature superconductors under magnetic fields is one of the most important topics in condensed matter physics and transport applications. For YBa$_2$Cu$_3$O$_7$ (YBCO), the measurements of magnetoresistance under a high magnetic field are technically challenging because the required magnetic field ($B$) to suppress the superconductivity is 100~T class. The low temperature (from 52 to 150 K) longitudinal magnetoresistance ($B$$\parallel$ab-plane$\parallel$$J$, where $J$ is an electrical current) was measured up to 103~T in optimally doped YBCO thin films. A radio frequency reflection method and the single-turn coil technique were employed. The electrical resistivity $\rho_{ab}$ exhibited a non-saturating magnetoresistance behavior until the highest field region, with the slope $\beta (=d \rho/d B)$ showing a pronounced deviation compared to the transverse magnetoresistance ($B$$\parallel$c-axis) case. These findings suggest a potential contribution due to the non-orbital origin in the high field phase of YBCO, because the quasiparticle orbital motion is expected to be absent in the longitudinal magnetoresistance.

cond-mat.str-el↗

arXiv2022

Thermodynamic approach for enhancing superconducting critical current performance

The addition of artificial pinning centers has led to an impressive increase in critical current density ($J_{\rm c}$) in a superconductor, enabling record-breaking all-superconducting magnets and other applications. $J_{\rm c}$ has reached $\sim 0.2$-$0.3$ $J_{\rm d}$, where $J_{\rm d}$ is the depairing current density, and the numerical factor depends on the pinning optimization. By modifying $\lambda$ and/or $\xi$, the penetration depth and coherence length, respectively, we can increase $J_{\rm d}$. For (Y$_{0.77}$Gd$_{0.23}$)Ba$_2$Cu$_3$O$_y$ ((Y,Gd)123) we achieve this by controlling the carrier density, which is related to $\lambda$ and $\xi$. We also tune $\lambda$ and $\xi$ by controlling the chemical pressure in the Fe-based superconductors, BaFe$_2$(As$_{1-x}$P$_x$)$_2$ films. The variation of $\lambda$ and $\xi$ leads to an intrinsic improvement of $J_{\rm c}$, via $J_{\rm d}$, obtaining extremely high values of $J_{\rm c}$ of $130$ MA/cm$^2$ and $8.0$ MA/cm$^2$ at $4.2$ K, consistent with an enhancement of $J_{\rm d}$ of a factor of $2$ for both incoherent nanoparticle-doped (Y,Gd)123 coated conductors (CCs) and BaFe$_2$(As$_{1-x}$P$_x$)$_2$ films, showing that this new material design is useful to achieving high critical current densities for a wide array of superconductors. The remarkably high vortex-pinning force in combination with this thermodynamic and pinning optimization route for the (Y,Gd)123 CCs reached $\sim 3.17$ TN/m$^3$ at $4.2$ K and 18 T (${\bf H}\parallel c$), the highest values ever reported in any superconductor.

cond-mat.supr-con↗

arXiv2022

Strengthened proximity effect at grain boundaries to enhance inter-grain supercurrent in Ba1-xKxFe2As2 superconductors

Iron-based superconductors have great potential for high-power applications due to their prominent high-field properties. One of the central issues in enhancing the critical current density of iron-based superconducting wires is to reveal the roles and limitations of grain boundaries in supercurrent transport. Here, we finely tuned the electronic properties of grain boundaries by doping Ba1-xKxFe2As2 superconductors in a wide range (0.25<x<0.598). It is found that the intra-grain Jcintra peaks near x~0.287, while the inter-grain Jcinter has a maximum at about x~0.458. Remarkably, the grain boundary transparency parameter defined as Jcinter/Jcintra rises monotonically with doping. Through detailed microscopic analysis, we suggest that the FeAs segregation phase commonly existing at grain boundaries and the adjacent grains constitute superconductor-normal metal-superconductor (SNS) Josephson junctions which play a key role in transporting supercurrent. A sandwich model based on the proximity effect and the SNS junction is proposed to well interpret our data. It is found that overdoping in superconducting grains largely strengthens the proximity effect and consequently enhances the intergrain supercurrent. Our results will shed new insights and inspirations for improving the application parameters of iron-based superconductors by grain boundary engineering.

cond-mat.supr-con↗

arXiv2022

R&D works for Superconducting Magnet for Future Accelerator Applications in Japan

KEK cryogenics science center is developing superconducting magnet technology for future accelerator science. Three major technological categories are focused; 1) high precision 3D magnetic field technology based on the g-2/EDM magnet developments, 2) rad-hard superconducting magnet technology based on the COMET magnet developments, and 3) high magnetic field superconducting magnet technology for future colliders based on the LHC MQXA and HL-LHC D1 magnet developments. Extensive studies including Nb3Sn conductor and magnet developments for high field magnets and HTS for rad-hard superconducting magnets are ongoing with various collaboration programs such as the US-Japan research collaboration.

physics.acc-ph↗

arXiv2021

Fabrication of small superconducting coils using (Ba,A)Fe2As2 (A: Na, K) round wires with large critical current densities

We report the fabrication of small (Ba,A)Fe2As2 (A: Na, K) coils using 10 m-class long round wires, fabricated by powder-in-tube (PIT) method. Coils are sintered using hot-isostatic-press (HIP) technique after glass-fiber insulations are installed. Critical current (Ic) of the whole coil using (Ba,Na)Fe2As2 and (Ba,K)Fe2As2 are 60 A and 66 A under the self-field, and the generated magnetic fields at the center of the coil reach 2.6 kOe and 2.5 kOe, respectively. Furthermore, the largest transport critical current density (Jc) and Ic in (Ba,Na)Fe2As2 wires picked up from the coil reach 54 kAcm-2 and 51.8 A at T = 4.2 K under a magnetic field of 100 kOe, respectively. This value exceeds transport Jc of all previous iron-based superconducting round wires. Texturing of grains in the core of the wire due to the improvement of the wire drawing process plays a key role for the enhancement of Jc.

cond-mat.supr-con↗

arXiv2021

Trapping a magnetic field of 14.8 T using stacked coated conductors of 12 mm width

We fabricated a compact (13$\times$12$\times$12.5 mm${^3}$) trapped-field magnet by stacking 200 pieces of EuBa${_2}$Cu${_3}$O${_7}$ coated conductors with BaHfO${_3}$ nanorods as artificial pinning centers. It was magnetized by field-cooling method using a 18 T superconducting magnet, and the maximum field of 14.8 T was trapped at 10 K at a field-ramp rate of 0.1 T/min. At higher temperatures, although the trapped field was decreased, we could trap the field with much faster ramp rate. In order to understand these results, we also performed calculations of the trapped field based on $J_\mathrm{c}-H$ characteristics of the coated conductor. The calculated trapped field value was larger than the experimental value at 10 K. This discrepancy can be understood by considering the reduction of the effective size of the stacked coated conductors due to the existence of extended regions of irregular flux penetration called "flux jets".

cond-mat.supr-con↗

arXiv2021

High-performance Ba1-xKxFe2As2 superconducting tapes with grain texture engineered via a scalable and cost-effective fabrication

Nowadays the development of high-field magnets strongly relies on the performance of superconducting materials. Iron-based superconductors exhibit high upper critical fields and low electromagnetic anisotropy, making them particularly attractive for high-field applications, especially in particle accelerator magnets, nuclear magnetic resonance spectrometers, medical magnetic resonance imaging systems and nuclear fusion reactors. Herein, through an industrially scalable and cost-effective manufacturing strategy, a practical level critical current density up to 1.1x10^5 A/cm2 at 4.2 K in an external magnetic field of 10 T was achieved in Cu/Ag composite sheathed Ba0.6K0.4Fe2As2 superconducting tapes. The preparation strategy combines flat rolling to induce grain texture and a subsequent hot-isostatic-pressing densification. By varying the parameters of rolling, the degree of grain texture was engineered. It is found that the transport properties of the Ba1-xKxFe2As2 tapes can be enhanced by applying a large amount of deformation during rolling, which can be attributed to the improved degree of c-axis texture. Microstructure characterizations on the highest-performance tape demonstrate that the Ba1-xKxFe2As2 phase has a uniform element distribution and small grains with good connectivity. Grain boundary pinning is consequently enhanced as proved by large currents circulating through the sample even at 25 K. Our work proves that Cu/Ag composite sheathed Ba1-xKxFe2As2 superconducting tapes can be a promising competitor for practical high-field applications in terms of the viable, scalable and cost-effective fabrication strategy applied and the high transport properties achieved in this work.

cond-mat.supr-con↗

arXiv2020

Enhancement of critical current density in (Ba,Na)Fe2As2 round wires using high-pressure sintering

We fabricated (Ba,Na)Fe2As2 superconducting wires using the powder-in-tube method and hot isostatic pressing. By improving powder synthesis processes compared with previous studies, highly pure raw materials for the wire fabrication were obtained. The largest transport critical current density (Jc) reached 40 kAcm-2 at T = 4.2 K under a magnetic field of 100 kOe. This value exceeds not only the value of transport Jc of the previous (Ba,Na)Fe2As2 wire but also those of all iron-based superconducting round wires. Improvements of polycrystalline powder synthesis play a key role for the enhancement of Jc. Furthermore, it was clarified that higher densification by high-pressure sintering and the texturing of grains in the core of the wire due to drawing also increased Jc effectively. Advantages of (Ba,Na)Fe2As2 wires compared with (Ba,K)Fe2As2 wires are also discussed.

cond-mat.supr-con↗

arXiv2019

Quadrupolar Susceptibility and Magnetic Phase Diagram of PrNi$_2$Cd$_{20}$ with Non-Kramers Doublet Ground State

In this study, ultrasonic measurements were performed on a single crystal of cubic PrNi$_2$Cd$_{20}$, down to a temperature of 0.02 K, to investigate the crystalline electric field ground state and search for possible phase transitions at low temperatures. The elastic constant $(C_{11}-C_{12})/2$, which is related to the $\Gamma_3$-symmetry quadrupolar response, exhibits the Curie-type softening at temperatures below $\sim$30 K, which indicates that the present system has a $\Gamma_3$ non-Kramers doublet ground state. A leveling-off of the elastic response appears below $\sim$0.1 K toward the lowest temperatures, which implies the presence of level splitting owing to a long-range order in a finite-volume fraction associated with $\Gamma_3$-symmetry multipoles. A magnetic field-temperature phase diagram of the present compound is constructed up to 28 T for $H \parallel$ [110]. A clear acoustic de Haas-van Alphen signal and a possible magnetic-field-induced phase transition at $H \sim$26 T are also detected by high-magnetic-field measurements.

cond-mat.str-el↗

arXiv2019

Ordering phenomena of spin trimers accompanied by large geometrical Hall effect

The wavefuntion of conduction electrons moving in the background of a non-coplanar spin structure can gain a quantal phase - Berry phase - as if the electrons were moving in a strong fictitious magnetic field. Such an emergent magnetic field effect is approximately proportional to the solid angle subtended by the spin moments on three neighbouring spin sites, termed the scalar spin chirality. The entire spin chirality of the crystal, unless macroscopically canceled, causes the geometrical Hall effect of real-space Berry-phase origin, whereas the intrinsic anomalous Hall effect (AHE) in a conventional metallic ferromagnet is of the momentum-space Berry-phase origin induced by relativistic spin-orbit coupling (SOC). Here, we report the ordering phenomena of the spin-trimer scalar spin chirality and the consequent large geometrical Hall effect in the breathing kagom\'e lattice compound Dy$_3$Ru$_4$Al$_{12}$, where the Dy$^{3+}$ moments form non-coplanar spin trimers with local spin chirality. Using neutron diffraction, we show that the local spin chirality of the spin trimers as well as its ferroic/antiferroic orders can be switched by an external magnetic field, accompanying large changes in the geometrical Hall effect. Our finding reveals that systems composed of tunable spin trimers can be a fertile field to explore large emergent electromagnetic responses arising from real-space topological magnetic orders.

cond-mat.str-el↗

arXiv2017

High transport current superconductivity in powder-in-tube Ba0.6K0.4Fe2As2 tapes at 27 tesla

The high upper critical field and low anisotropy of iron-based superconductors make them being particularly attractive for high-field applications. However, the current carrying capability needs to be enhanced by overcoming the weak-link effect between misaligned grains inside wire and tape conductors. Here we demonstrate a high transport critical current density (Jc) reaching 1.5x10^5 A/cm^2 (Ic = 437 A) at 4.2 K and 10 T in Ba0.6K0.4Fe2As2 (Ba-122) tapes prepared by a combination of conventional powder-in-tube method and optimized hot-press technique. The transport Jc measured at 4.2 K under high magnetic fields of 27 T is still on the level of 5.5x10^4 A/cm^2, which is much higher than those of low-temperature superconductors. This is the first report of hot-pressed Ba-122 superconducting tapes and these Jc values are by far the highest ever reported for iron-based superconducting wires and tapes. These high-performance tapes exhibit high degree of c-axis texture of Ba-122 grains and low anisotropy of transport Jc, showing great potential for construction of high-field superconducting magnets.

cond-mat.supr-con↗

arXiv2016

Enhancement of critical current densities in (Ba,K)Fe2As2 wires and tapes using HIP technique

(Ba,K)Fe2As2 superconducting wires and tapes are fabricated by using hot isostatic pressing (HIP) technique, and their superconducting properties are studied. In the HIP round wire, transport critical current density (Jc) at 4.2 K has achieved record-high value of 175 kA/cm2 at zero field, and exceeds 20 kA/cm2 even at 100 kOe. Improvement of polycrystalline powder synthesis may play a key role for the enhancement of Jc. In the HIP tape, even larger transport Jc of 380 kA/cm2 is realized at zero field. Based on magnetization and magneto-optical measurements, possible further enhancement of Jc is discussed.

cond-mat.supr-con↗

arXiv2016

Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils

Iron-pnictides are hotly studied since 2008 in the superconducting materials research area, due to their special properties and unclear mechanism. Big achievement has been made in the pnictide research during the past years. For practical uses, pnictide superconductor should be fabricated in a long wire form which can be used for different devices. In this work, 100 m class 7-core Sr0.6K0.4Fe2As2 (Sr122) tapes have been made using the powder-in-tube technique, which is reported for the first time. Clearly, an average Jc of 1.3x10^4 A/cm^2 at 10 T was reached over the 115 meter length, showing a high property and good uniformity of 100 meter level Sr122 tapes. Using the 10 m long Sr122 tapes, two double-pancake coils were fabricated by a wind and reaction technique. No transport current could be measured for the coil made from the mono-filamentary tape. However, transport Ic was obtained in the coil made from the 7-filamentary tape. The factors which affect the superconducting property of the coil were discussed in this work.

cond-mat.supr-con↗

arXiv2016

Vortex pinning and dynamics in high performance Sr0.6K0.4Fe2As2 superconductor

We have studied vortex pinning and dynamics in a Sr0.6K0.4Fe2As2 superconducting tape with critical current density Jc~0.1 MA/cm2 at 4.2 K and 10 T. It is found that grain boundary pinning is dominant in the vortex pinning mechanism. Furthermore, we observe large density of dislocations which can also serve as effective pinning centers. We find that the temperature dependence of critical current density is in agreement with the model of vortices pinned via spatial fluctuation of charge carrier mean free path. Magnetic relaxation measurement indicates that the magnetization depends on time in a logarithmic way. The relaxation rate in the low and intermediate temperature region is small, and it exhibits a weak temperature and field dependence. A crossover from elastic creep to plastic creep regime is observed. Finally, we conclude a vortex phase diagram for the high performance Sr0.6K0.4Fe2As2 superconducting tape.

cond-mat.supr-con↗

arXiv2015

Critical current density and microstructure of iron sheathed multifilamentary Sr1-xKxFe2As2/Ag composite conductors

Iron-based superconductors have been considered to be very promising in high-field applications, for which multifilamentary wire and tape conductors with high mechanical strength are essential. In this work, 7-,19- and 114-filament Sr0.6K0.4Fe2As2 (Sr-122) superconducting wires and tapes with silver as matrix and iron as outer reinforcing sheath were produced by the ex situ powder-in-tube method. The mass densities of Sr-122 phase in 7- and 19-filament conductors were investigated by microhardness characterization, which revealed a positive correlation between hardness and transport critical current density (Jc) in round wires and flat tapes with various thicknesses. For Sr-122/Ag/Fe 114-filament conductors, in which an average cross-sectional filament size smaller than 50 microns was achieved by drawing into round wires of 2.0 mm in diameter, the transport Jc can be significantly enhanced by flat rolling, as for the 7- and 19-filament conductors. The highest transport Jc of the 7-,19- and 114-filament Sr-122/Ag/Fe tapes reached 1.4x10^4, 8.4x10^3 and 6.3x10^3 A cm-2 (4.2 K, 10 T), respectively, showing a Jc degradation with the increase of filament number. This Jc degradation can be ascribed to the sausage effect for filaments in longitudinal direction and the grain refinement in these very fine filaments.

cond-mat.supr-con↗