arXiv subjects

S. Williams

Publications and source records attributed to S. Williams.

At least 19 recordsLinked to original sources

arXiv2026

SN 2022erq: A Superluminous Thermonuclear Supernova with Escalating Preexplosion Mass Loss

We present a photometric and spectroscopic study of the superluminous Type Ia supernova SN 2022erq. Its early spectra, dominated by iron-group elements with weak intermediate-mass features, might indicate highly efficient nuclear burning, broadly similar to that inferred for some overluminous SNe Ia. The rapid emergence and persistence of narrow Balmer emission lines superposed on this iron-rich spectrum provide clear evidence of long-lived interaction with a hydrogen-rich circumstellar medium (CSM), establishing SN 2022erq as a member of the rare Ia-CSM class. SN 2022erq reached a peak bolometric luminosity of about 8 x 10^43 erg/s and exhibited an exceptionally slow post-peak decline, indicating that its light curve is dominated by long-duration ejecta-CSM interaction. By combining H-alpha diagnostics with bolometric light-curve modeling, we reconstruct the pre-explosion mass-loss history of the progenitor. The mass-loss rate escalated by one order of magnitude over the final decades, rising from about 0.04 to about 0.6 solar masses per year. This surge produced a massive, extended CSM shell of about 3 solar masses out to about 3.5 x 10^16 cm. The young stellar environment (about 100 Myr) together with this substantial, extensive CSM points to a progenitor system consisting of a white dwarf and an intermediate-mass companion that underwent increasing mass loss prior to explosion.

astro-ph.HE↗

arXiv2025

SN 2022ngb: A faint, slowly evolving Type IIb supernova with a low-mass envelope

An extensive photometric and spectroscopic follow-up campaign of the Type IIb SN 2022ngb is presented in the article. Through detailed modeling of this dataset, we aim to constrain the key physical parameters of the explosion, infer the nature of the progenitor star and its environment, and probe the dynamical properties of the ejecta. We analyze photometric and spectroscopic data of SN 2022ngb. By constructing and modeling the bolometric light curve with semi-analytic models, we estimate the primary explosion parameters. The spectroscopic data are compared with those of well-studied SNe IIb and NLTE models to constrain the properties of the progenitor and the structure of the resulting ejecta. SN 2022ngb is a low-luminosity SN IIb with a peak bolometric luminosity of L_bol = 7.76 (+1.15/-1.00) x 10^41 erg/s and a V-band rising time of 24.32 +/- 0.50 days. Light curve modeling indicates an ejecta mass of ~2.9-3.2 M_sun, an explosion energy of ~1.4 x 10^51 erg, and a low synthesized 56Ni mass of ~0.045 M_sun. Nebular phase spectra exhibit asymmetric line profiles, pointing to a non-spherical explosion and an anisotropic distribution of radioactive material. Our analysis reveals a relatively compact stripped-envelope progenitor with a pre-SN mass of approximately 4.7 M_sun (corresponding to a 15-16 M_sun ZAMS star). Our analysis suggests that SN 2022ngb originated from the explosion of a moderate-mass relatively compact, stripped-envelope star in a binary system. The asymmetries inferred from the nebular phase spectral line features suggest a non-spherical explosion.

astro-ph.SR↗

arXiv2025

Massive stars exploding in a He-rich circumstellar medium. XI. Diverse evolution of five Ibn SNe 2020nxt, 2020taz, 2021bbv, 2023utc and 2024aej

We present the photometric and spectroscopic analysis of five Type Ibn supernovae (SNe): SN 2020nxt, SN 2020taz, SN 2021bbv, SN 2023utc, and SN 2024aej. These events share key observational features and belong to a family of objects similar to the prototypical Type Ibn SN 2006jc. The SNe exhibit rise times of approximately 10 days and peak absolute magnitudes ranging from $-$16.5 to $-$19 mag. Notably, SN 2023utc is the faintest Type Ibn supernova discovered to date, with an exceptionally low r-band absolute magnitude of $-16.4$ mag. The pseudo-bolometric light curves peak at $(1-10) \times 10^{42}$ erg s$^{-1}$, with total radiated energies on the order of $(1-10) \times 10^{48}$ erg. Spectroscopically, these SNe display relatively slow spectral evolution; the early spectra are characterised by a hot blue continuum and prominent He I emission lines. Early spectra show blackbody temperatures exceeding $10000~\mathrm{K}$, with a subsequent decline in temperature during later phases. Narrow He I lines, indicative of unshocked circumstellar material (CSM), show velocities of approximately $1000~\mathrm{km~s^{-1}}$. The spectra suggest that the progenitors of these SNe underwent significant mass loss prior to the explosion, resulting in a He-rich CSM. Light curve modelling yields estimates for the ejecta mass ($M_{\rm ej}$) in the range $1-3~M_{\odot}$, with kinetic energies ($E_{\rm Kin}$) of $(0.1-1) \times 10^{50}$ erg. The inferred CSM mass ranges from $0.2$ to $1~M_{\odot}$. These findings are consistent with expectations for core-collapse events arising from relatively massive, envelope-stripped progenitors.

astro-ph.HE↗

arXiv2024

Abrasion-fission reactions at intermediate energies

The availability of high-intensity, heavy-ion beams coupled to sensitive, large solid-angleacceptance spectrometers has enabled a detailed examination of the fission fragments produced in induced-fission reactions. The abrasion-fission process involves the formation of projectile-like prefragments in violent nuclear collisions at relative energies in excess of 100 MeV/u. At intermediate energies below this threshold, experiments suggest a change in the prefragment kinematic qualities. Information regarding the influence of this transitional phase upon the evolution of nuclei approaching the point of scission is scarce. In this article, data are presented for over 200 nuclei from nickel to palladium produced in abrasion-fission reactions of a 80 MeV/u 238U beam. Cross sections were obtained following yield measurements performed for the principal charge states of the identified fission fragments and a detailed analysis of the ion transmission. A full kinematic analysis of the fission fragments has been performed using the LISE++ software package, where the trajectory of an ion passing through a spectrometer can be reconstructed based upon measurements at the focal plane. The results obtained at the S800 spectrograph are compared with predictions obtained with a three-fission progenitor (3EER) model. Systematic studies of fission-fragment properties continue to provide a valuable experimental benchmark for theoretical efforts directed toward describing this complex decay channel, that is important in the context of planning experiments to explore the neutron-rich region of the nuclear chart at rare-isotope beam facilities.

nucl-ex↗

arXiv2024

FAT-GEMs: (Field Assisted) Transparent Gaseous-Electroluminescence Multipliers

The idea of implementing electroluminescence-based amplification through transparent multi-hole structures (FAT-GEMs) has been entertained for some time. Arguably, for such a technology to be attractive it should perform at least at a level comparable to conventional alternatives based on wires or meshes. We present now a detailed calorimetric study carried out for 5.9~keV X-rays in xenon, for pressures ranging from 2 to 10~bar, resorting to different geometries, production and post-processing techniques. At a reference voltage 5~times above the electroluminescence threshold ($E_{EL,th}\sim0.7$~kV/cm/bar), the number of photoelectrons measured for the best structure was found to be just 18\%~below that obtained for a double-mesh with the same thickness and at the same distance. The energy resolution stayed within 10\% (relative) of the double-mesh value. An innovative characteristic of the structure is that vacuum ultraviolet (VUV) transparency of the polymethyl methacrylate (PMMA) substrate was achieved, effectively, through tetraphenylbutadiene (TPB) coating of the electroluminescence channels combined with indium tin oxide (ITO) coating of the electrodes. This resulted in a $\times 2.25$-increased optical yield (compared to the bare structure), that was found to be in good agreement with simulations if assuming a TPB wavelength-shifting-efficiency at the level of WLSE=0.74-1.28, compatible with expected values. This result, combined with the stability demonstrated for the TPB coating under electric field (over 20~h of continuous operation), shows great potential to revolutionize electroluminescence-based instrumentation.

physics.ins-det↗

arXiv2021

Development of very-thick transparent GEMs with wavelength-shifting capability for noble element TPCs

A new concept for the simultaneous detection of primary and secondary scintillation in time projection chambers is proposed. Its core element is a type of very-thick GEM structure supplied with transparent electrodes and machined from a polyethylene naphthalate plate, a natural wavelength-shifter. Such a device has good prospects for scalability and, by virtue of its genuine optical properties, it can improve on the light collection efficiency, energy threshold and resolution of conventional micropattern gas detectors. This, together with the intrinsic radiopurity of its constituting elements, offers advantages for noble gas and liquid based time projection chambers, used for dark matter searches and neutrino experiments. Production, optical and electrical characterization, and first measurements performed with the new device are reported.

physics.ins-det↗

arXiv2021

New (TH)GEM coating materials characterised using spectroscopy methods

In this work GEM and single-hole Thick GEM structures, composed of different coating materials, are studied. The used foils incorporate conductive layers made of copper, aluminium, molybdenum, stainless steel, tungsten and tantalum. The main focus of the study is the determination of the material dependence of the formation of electrical discharges in GEM-based detectors. For this task, discharge probability measurements are conducted with several Thick GEM samples using a basic electronics readout chain. In addition to that, optical spectroscopy methods are employed to study the light emitted during discharges from the different foils. It is observed that the light spectra of GEMs include emission lines from the conductive layer material. This indicates the presence of the foil material in the discharge plasma after the initial spark. However, no lines associated with the coating material are observed while studying spark discharges induced in Thick GEMs. It is concluded that the conductive layer material does not play a substantial role in terms of stability against primary discharges. However, a strong material dependence is observed in the case of secondary discharge formation, pointing to molybdenum coating as the one providing increased stability.

physics.ins-det↗

arXiv2020

Nb3Sn multicell cavity coating system at JLAB

SRF niobium cavities are the building blocks of modern accelerators for scientific applications. Lower surface resistance, higher fields, and high operating temperatures advance the reach of the future accelerators for scientific discovery as well as potentially enabling cost-effective industrial solutions. We describe the design and performance of an Nb$_{3}$Sn coating system that converts the inner surface of niobium cavities to Nb$_{3}$Sn film. Niobium surface, heated by radiation from the niobium retort, is exposed to Sn and SnCl$_{2}$ vapor during the heat cycle, which results in about 2 $\mu$m Nb$_{3}$Sn film on the niobium surface. Film composition and structure as well as RF properties with 1-cell R\&D cavities and 5-cell practical accelerator cavities are presented.

physics.acc-ph↗

arXiv2019

Effects of Electron-Beam Irradiation on Graphene Oxide

Graphene oxide (GO) is a nanofilm composed of graphene with various oxygen functional groups attached. GO is of interest due to its unique mechanical-enhancement properties, its tunable electronic properties, and its potential use in the wide-scale production of graphene. Scanning electron microscopes (SEMs) are frequently used to characterize and study GO films. The purpose of this project was to study the effects of SEM-imaging on GO films. Using an SEM, we irradiated GO samples at electron beam-energies of 10, 20, and 30 keV (at a constant emission current of ~40 micro-amps) for times ranging from 15 minutes to one hour. Raman D- and G-band intensities were used to examine structural modifications/damage to GO samples as a function of beam energy and exposure time. The results suggest that imaging with a 30 keV electron beam for 30 minutes may lead to the formation of amorphous carbon, while imaging with 10 keV or 20 keV beams for 30 minutes does not have a significant effect on GO samples.

physics.app-ph↗

arXiv2019

Effects of Microwave Irradiation on Multiwalled Carbon Nanotubes of Different Diameters

We have studied the visible and infrared radiation emitted by multi-walled carbon nano-tubes of different diameters when exposed to 2.45 GHz microwaves. A comparison of the spectra suggests that multi-walled carbon nano-tubes with larger diameters emit radiation of greater intensity than those with smaller diameters. Furthermore, the multi-walled carbon nano-tubes continued to emit visible and infrared radiation over the course of several microwave-irradiation cycles, with no degradation in the intensity of the emitted radiation. A comparison of Raman D- to G-band peak-intensity ratios revealed that microwave-irradiation did not significantly impact the multi-walled carbon nano-tubes' defect densities. The results of our experiments suggest that multi-walled carbon nano-tubes may have the potential for use in lighting technologies, and that ohmic heating caused by the polarization of the multi-walled carbon nano-tubes in the microwave field is likely responsible for the observed emissions of visible and infrared radiation.

physics.app-ph↗

arXiv2019

A new amplification structure for time projection chambers based on electroluminescence

A simple hole-type secondary scintillation structure (2 mm-hole, 5 mm-pitch, 5 mm-thickness) is introduced and its operation demonstrated in pure xenon in the pressure range 2-10 bar. The new device, characteristically translucent, has been manufactured through a collaboration between IGFAE and the CERN workshop, and relies entirely on radiopure materials (acrylic and copper), being extremely rugged in the presence of sparks, mechanically robust, and easily scalable, yet made through a relatively simple process. With an overall figure (at 10 bar) characterized by an energy resolution of 18.9%(FWHM) for $^{55}$Fe x-rays, an optical gain of m$_\gamma$ = 500 ph/e, and a stable operation at reduced fields more than twice those of some of the presently running experiments ($E_{EL}=3$ kV/cm/bar), this family of structures seems to show great promise for electroluminescence readouts on large scale detectors. As argued below, further improvements have the potential of bringing the energy resolution close to the Fano factor and increasing the optical gain.

physics.ins-det↗

arXiv2019

Microstructure, hardness and mechanical properties of two different unalloyed tantalum wires deposited via Wire + Arc Additive Manufacture

An innovative way of producing large-scale unalloyed tantalum parts, based on the Wire + Arc Additive Manufacturing process, has been developed in this study. Two different unalloyed tantalum wires have been used to deposit 200-mm-long structures in tantalum. The effect of the wire chemistry on microstructure, hardness, porosity, mechanical properties and strain localisation has been investigated. The deposits showed high integrity and excellent mechanical properties, with yield strength, ultimate tensile strength and elongation as high as 234 MPa, 261 MPa, and 36 %, respectively. Indeed, yield strength was higher than commercially available tantalum, even though, in this study, the grains were large and had a high aspect ratio. Wire + Arc Additive Manufacture has clearly shown the potential to produce tantalum components with relatively low cost and reduced lead time, thus offering a new robust and viable manufacturing route.

physics.app-ph↗

arXiv2019

Grain refinement in unalloyed tantalum structure deposited using Wire + Arc Additive Manufacture and vertical cold rolling

Components manufactured via Wire + Arc Additive Manufacturing are usually characterised by large columnar grains. This can be mitigated by introducing in-process cold-rolling; in fact, the associated local plastic deformation leads to a reduction of distortion and residual stresses, and to microstructural refinement. In this research, inter-pass rolling was applied with a load of 50 kN to a tantalum linear structure to assess its effectiveness in changing the grain structure from columnar to equiaxed, as well as in refining the grain size. An average grain size of 650 microns has been obtained after five cycles of inter-pass rolling and deposition. When the deformed layer was reheated during the subsequent deposition, recrystallisation occurred, leading to the growth of new strain-free finer equiaxed grains. The depth of the refined region has been characterised and correlated to the hardness profile developed after rolling. A reduction of porosity was also registered. Furthermore, a random texture was formed after rolling, which should result in isotropic mechanical properties. Wire + Arc Additive Manufacturing process demonstrated the ability to deposit sound refractory metal components and the possibility to improve the microstructure when coupled with cold inter-pass rolling.

physics.app-ph↗

arXiv2018

Reinvestigation of the excited states in the proton emitter $^{151}$Lu: particle-hole excitations across the $N=Z=64$ subshell

The excited states of the proton emitter $^{151}$Lu were reinvestigated in a recoil-decay tagging experiment at the Accelerator Laboratory of the University of Jyväskylä (JYFL). The level scheme built on the ground state of $^{151}$Lu was updated with five new $γ$-ray transitions. Large-scale shell model calculations were carried out to interpret the experimental level scheme. It is found that the excitation energies of states above the $27/2^-$ and $23/2^+$ isomeric levels can be sensitive to excitations from $g_{7/2}$ and $d_{5/2}$ to single-particle orbitals above $N=Z=64$.

nucl-ex↗

arXiv2016

X-ray Metrology of an Array of Active Edge Pixel Sensors for Use at Synchrotron Light Sources

We report on the production of an array of active edge silicon sensors as a prototype of a large array. Four Medipix3RX.1 chips were bump bonded to four single chip sized Advacam active edge n-on-n sensors. These detectors were then mounted into a 2 by 2 array and tested on B16 at Diamond Light Source with an x-ray beam spot of 2um. The results from these tests, compared with optical metrology give confidence that these sensors are sensitive to the physical edge of the sensor, with only a modest loss of efficiency in the final two rows of pixels. We present the efficiency maps recorded with the microfocus beam and a sample powder diffraction measurement. These results give confidence that this sensor technology can be used in much larger arrays of detectors at synchrotron light sources.

physics.ins-det↗

arXiv2016

Deciphering the bipolar planetary nebula Abell 14 with 3D ionization and morphological studies

Abell 14 is a poorly studied object despite being considered a born again planetary nebula. We performed a detailed study of its 3D morphology and ionization structure using the SHAPE and MOCASSIN codes. We found that Abell 14 is a highly evolved, bipolar nebula with a kinematical age of $\sim$19,400 yr for a distance of 4 kpc. The high He abundance, and N/O ratio indicate a progenitor of 5 $M_{\odot}$ that has experienced the third dredge-up and hot bottom burning phases. The stellar parameters of the central source reveal a star at a highly evolved stage near to the white dwarf cooling track, being inconsistent with the born again scenario. The nebula shows unexpectedly strong [N I] $λ5200$ and [O I] $λ6300$ emission lines indicating possible shock interactions. Abell 14 appears to be a member of a small group of highly evolved, extreme Type-I PNe. The members of this group lie at the lower-left corner of the PNe regime on the [N II]/H$α$ vs. [S II]/H$α$ diagnostic diagram, where shock--excited regions/objects are also placed. The low luminosity of their central stars, in conjunction with the large physical size of the nebulae, result in a very low photo-ionization rate, which can make any contribution of shock interaction easily perceptible, even for small velocities.

astro-ph.SR↗

arXiv2015

The monoclinic crystal structure of $α$-RuCl$_3$ and the zigzag antiferromagnetic ground state

The layered honeycomb magnet alpha-RuCl3 has been proposed as a candidate to realize a Kitaev spin model with strongly frustrated, bond-dependent, anisotropic interactions between spin-orbit entangled jeff=1/2 Ru4+ magnetic moments. Here we report a detailed study of the three-dimensional crystal structure using x-ray diffraction on untwinned crystals combined with structural relaxation calculations. We consider several models for the stacking of honeycomb layers and find evidence for a crystal structure with a monoclinic unit cell corresponding to a stacking of layers with a unidirectional in-plane offset, with occasional in-plane sliding stacking faults, in contrast with the currently-assumed trigonal 3-layer stacking periodicity. We report electronic band structure calculations for the monoclinic structure, which find support for the applicability of the jeff=1/2 picture once spin orbit coupling and electron correlations are included. We propose that differences in the magnitude of anisotropic exchange along symmetry inequivalent bonds in the monoclinic cell could provide a natural mechanism to explain the spin gap observed in powder inelastic neutron scattering, in contrast to spin models based on the three-fold symmetric trigonal structure, which predict a gapless spectrum within linear spin wave theory. Our susceptibility measurements on both powders and stacked crystals, as well as neutron powder diffraction show a single magnetic transition at TN ~ 13K. The analysis of the neutron data provides evidence for zigzag magnetic order in the honeycomb layers with an antiferromagnetic stacking between layers. Magnetization measurements on stacked single crystals in pulsed field up to 60T show a single transition around 8T for in-plane fields followed by a gradual, asymptotic approach to magnetization saturation, as characteristic of strongly anisotropic exchange interactions.

cond-mat.str-el↗

arXiv2015

Effects of Microwave Absorption on Long and Short Single-Walled Carbon Nanotubes at 10-6 Torr

Carbon nanotubes have been observed to emit ultraviolet, visible and infrared radiation when exposed to microwaves. We have performed experiments in which both short (0.5 microns to 2 microns) and long (5 microns to 30 microns) single and double walled carbon nanotubes were exposed to 2.46 GHz microwaves at a pressure of 10^-6 Torr. Structural modifications of the-carbon nanotubes due to microwave absorption have been studied using the Raman spectroscopy G-band and D-band intensities, which suggest that microwave irradiation at relatively low pressure results in an increase in nanotube defects, especially in the case of the long nanotubes. Furthermore, a comparison of the spectra of the radiation emitted from the nanotubes suggests that the longer nanotubes emitted radiation of much greater intensity than the shorter nanotubes. Based on the results of the experiments and results described in previous reports, the ultraviolet, visible and infrared radiation emitted as the result of microwave absorption by carbon nanotubes seems to be primarily blackbody radiation emitted due to Joule heating. However, the presence of several broad photopeaks in the spectra of the emitted radiation (which do not seem to be related to gases absorbed by the nanotubes or the presence of catalyst particles) suggest that emissions are not the result of Joule heating alone.

cond-mat.mes-hall↗