arXiv subjects

S. Viaene

Publications and source records attributed to S. Viaene.

At least 19 recordsLinked to original sources

arXiv2021

Fornax 3D project: assessing the diversity of IMF and stellar population maps within the Fornax Cluster

The stellar initial mass function (IMF) is central to our interpretation of astronomical observables and to our understanding of most baryonic processes within galaxies. The universality of the IMF, suggested by observations in our own Milky Way, has been thoroughly revisited due to the apparent excess of low-mass stars in the central regions of massive quiescent galaxies. As part of the efforts within the Fornax 3D project, we aim to characterize the two-dimensional IMF variations in a sample of 23 quiescent galaxies within the Fornax cluster. For each galaxy in the sample, we measured the mean age, metallicity, [Mg/Fe], and IMF slope maps from spatially resolved integrated spectra. The IMF maps show a variety of behaviors and internal substructures, roughly following metallicity variations. However, metallicity alone is not able to fully explain the complexity exhibited by the IMF maps. In particular, for relatively metal-poor stellar populations, the slope of the IMF seems to depend on the (specific) star formation rate at which stars were formed. Moreover, metallicity maps have systematically higher ellipticities than IMF slope ones. At the same time, both metallicity and IMF slope maps have at the same time higher ellipticities than the stellar light distribution in our sample of galaxies. In addition we find that, regardless of the stellar mass, every galaxy in our sample shows a positive radial [Mg/Fe] gradient. This results in a strong [Fe/H]-[Mg/Fe] relation, similar to what is observed in nearby, resolved galaxies. Since the formation history and chemical enrichment of galaxies are causally driven by changes in the IMF, our findings call for a physically motivated interpretation of stellar population measurements based on integrated spectra that take into account any possible time evolution of the stellar populations.

astro-ph.GA↗

arXiv2021

The Fornax3D project: Planetary nebulae catalogue and independent distance measurements to Fornax cluster galaxies

Extragalactic planetary nebulae (PNe) offer a way to determine the distance to their host galaxies thanks to the nearly universal shape of the planetary nebulae luminosity function (PNLF). Accurate PNe distance measurements rely on obtaining well-sampled PNLFs and the number of observed PNe scales with the encompassed stellar mass. This means either disposing of wide-field observations or focusing on the bright central regions of galaxies. In this work we take this second approach and conduct a census of the PNe population in the central regions of galaxies in the Fornax cluster, using VLT/MUSE data for the early-type galaxies observed over the course of the Fornax3D survey. Using such integral-field spectroscopic observations to carefully separate the nebular emission from the stellar continuum, we isolated [OIII] 5007 {\AA} sources of interest, filtered out unresolved impostor sources or kinematic outliers, and present a catalogue of 1350 unique PNe sources across 21 early-type galaxies, which includes their positions, [OIII] 5007 {\AA} line magnitudes, and line-of-sight velocities. Using the PNe catalogued within each galaxy, we present independently derived distance estimates based on the fit to the entire observed PNLF observed while carefully accounting for the PNe detection incompleteness. With these individual measurements, we arrive at an average distance to the Fornax cluster itself of 19.86 $\pm$ 0.32 Mpc ($\mu_{PNLF}$ = 31.49 $\pm$ 0.04 mag). Our PNLF distance measurements agree well with previous distances based on surface brightness fluctuations, finding no significant systematic offsets between the two methods as otherwise reported in previous studies.

astro-ph.GA↗

arXiv2021

The Fornax 3D project: PNe populations and stellar metallicity in edge-on galaxies

Context. Extragalactic Planetary Nebulae (PNe) are useful distance indicators and are often used to trace the dark-matter content in external galaxies. At the same time, PNe can also be used as probes of their host galaxy stellar populations and to help understanding the later stages of stellar evolution. Previous works have indicated that specific number of PNe per stellar luminosity can vary across different galaxies and as a function of stellar-population properties, for instance increasing with decreasing stellar metallicity. Aims. In this study we further explore the importance of stellar metallicity in driving the properties of the PNe population in early-type galaxies, using three edge-on galaxies in the Fornax cluster offering a clear view into their predominantly metal-rich and metal-poor regions near the equatorial plane or both below and above it, respectively . Methods. Using VLT-MUSE integral-field observations and dedicated PNe detection procedures, we construct the PNe luminosity function and compute the luminosity-specific number of PNe alpha in both in- and off-plane regions of our edge-on systems. Results. Comparing these alpha values with metallicity measurements also based on the same MUSE data, we find no evidence for an increase in the specific abundance of PNe when transitioning between metal-rich and metal-poor regions. Conclusions. Our analysis highlights the importance of ensuring spatial consistency to avoid misleading results when investigating the link between PNe and their parent stellar populations and suggest that in passively-evolving systems variations in the specific number of PNe may pertain to rather extreme metallicity regimes found either in the innermost or outermost regions of galaxies.

astro-ph.GA↗

arXiv2021

The Fornax3D project: Assembly histories of lenticular galaxies from a combined dynamical and population orbital analysis

Abridged for arXiv: In this work, we apply a powerful new technique in order to observationally derive accurate assembly histories through a self-consistent combined stellar dynamical and population galaxy model. We present this approach for three edge-on lenticular galaxies from the Fornax3D project -- FCC 153, FCC 170, and FCC 177 -- in order to infer their mass assembly histories individually and in the context of the Fornax cluster. The method was tested on mock data from simulations to quantify its reliability. We find that the galaxies studied here have all been able to form dynamically-cold (intrinsic vertical velocity dispersion $\sigma_z \lesssim 50\ {\rm km}\ {\rm s}^{-1}$) stellar disks after cluster infall. Moreover, the pre-existing (old) high angular momentum components have retained their angular momentum (orbital circularity $\lambda_z > 0.8$) through to the present day. Comparing the derived assembly histories with a comparable galaxy in a low-density environment -- NGC 3115 -- we find evidence for cluster-driven suppression of stellar accretion and merging. We measured the intrinsic stellar age--velocity-dispersion relation and find that the shape of the relation is consistent with galaxies in the literature across redshift. There is tentative evidence for enhancement in the luminosity-weighted intrinsic vertical velocity dispersion due to the cluster environment. But importantly, there is an indication that metallicity may be a key driver of this relation. We finally speculate that the cluster environment is responsible for the S0 morphology of these galaxies via the gradual external perturbations, or `harassment', generated within the cluster.

astro-ph.GA↗

arXiv2020

High-resolution, 3D radiative transfer modelling IV. AGN-powered dust heating in NGC 1068

Dust emission, an important diagnostic of star formation and ISM mass throughout the Universe, can be powered by sources unrelated to ongoing star formation. In the framework of the DustPedia project we have set out to disentangle the radiation of the ongoing star formation from that of the older stellar populations. This is done through detailed, 3D radiative transfer simulations of face-on spiral galaxies. In this particular study, we focus on NGC 1068, which contains an active galactic nucleus (AGN). The effect of diffuse dust heating by AGN (beyond the torus) was so far only investigated for quasars. This additional dust heating source further contaminates the broadband fluxes on which classic galaxy modelling tools rely to derive physical properties. We aim to fit a realistic model to the observations of NGC 1068 and quantify the contribution of the several dust heating sources. Our model is able to reproduce the global spectral energy distribution of the galaxy. It matches the resolved optical and infrared images fairly well, but deviates in the UV and the submm. We find a strong wavelength dependency of AGN contamination to the broadband fluxes. It peaks in the MIR, drops in the FIR, but rises again at submm wavelengths. We quantify the contribution of the dust heating sources in each 3D dust cell and find a median value of 83% for the star formation component. The AGN contribution is measurable at the percentage level in the disc, but quickly increases in the inner few 100 pc, peaking above 90%. This is the first time the phenomenon of an AGN heating the diffuse dust beyond its torus is quantified in a nearby star-forming galaxy. NGC 1068 only contains a weak AGN, meaning this effect can be stronger in galaxies with a more luminous AGN. This could significantly impact the derived star formation rates and ISM masses for such systems.

astro-ph.GA↗

arXiv2020

The Fornax 3D project: Globular clusters tracing kinematics and metallicities

Globular clusters (GCs) are found ubiquitously in massive galaxies and due to their old ages, they are regarded as fossil records of galaxy evolution. Spectroscopic studies of GC systems are often limited to the outskirts of galaxies, where GCs stand out against the galaxy background and serve as bright tracers of galaxy assembly. In this work, we use the capabilities of the Multi Unit Explorer Spectrograph (MUSE) to extract a spectroscopic sample of 722 GCs in the inner regions ($\lesssim 3 R_\text{eff}$) of 32 galaxies in the Fornax cluster. These galaxies were observed as part of the Fornax 3D project, a MUSE survey that targets early and late-type galaxies within the virial radius of Fornax. After accounting for the galaxy background in the GC spectra, we extracted line-of-sight velocities and determined metallicities of a sub-sample of 238 GCs. We found signatures of rotation within GC systems, and comparing the GC kinematics and that of the stellar body shows that the GCs trace the spheroid of the galaxies. While the red GCs prove to closely follow the metallicity profile of the host galaxy, the blue GCs show a large spread of metallicities but they are generally more metal-poor than the host.

astro-ph.GA↗

arXiv2020

The Fornax 3D project: Non-linear colour-metallicity relation of globular clusters

Globular cluster (GC) systems of massive galaxies often show a bimodal colour distribution. This has been interpreted as a metallicity bimodality, created by a two-stage galaxy formation where the red, metal-rich GCs were formed in the parent halo and the blue metal-poor GCs were accreted. This interpretation, however, crucially depends on the assumption that GCs are exclusively old stellar systems with a linear colour-metallicity relation (CZR). The shape of the CZR and range of GC ages are currently under debate, because their study requires high quality spectra to derive reliable stellar population properties. We determined metallicities with full spectral fitting from a sample of 187 GCs with high spectral signal-to-noise ratio in 23 galaxies of the Fornax cluster that were observed as part of the Fornax 3D project. The derived CZR from this sample is non-linear and can be described by a piecewise linear function with a break point at ($g - z$) $\sim$ 1.1 mag. The less massive galaxies in our sample ($M_\ast < 10^{10} M_\odot$) appear to have slightly younger GCs, but the shape of the CZR is insensitive to the GC ages. Although the least massive galaxies lack red, metal-rich GCs, a non-linear CZR is found irrespective of the galaxy mass, even in the most massive galaxies ($M_\ast \geq 10^{11} M_\odot$). Our CZR predicts narrow unimodal GC metallicity distributions for low mass and broad unimodal distributions for very massive galaxies, dominated by a metal-poor and metal-rich peak, respectively, and bimodal distributions for galaxies with intermediate masses (10$^{10}$ $\leq$ $M_\ast < 10^{11} M_\odot$) as a consequence of the relative fraction of red and blue GCs. The diverse metallicity distributions challenge the simple differentiation of GC populations solely based on their colour.

astro-ph.GA↗

arXiv2020

Fornax 3D project: automated detection of planetary nebulae in the centres of early-type galaxies and first results

Extragalactic planetary nebulae (PNe) are detectable through relatively strong nebulous [OIII] emission and act as direct probes into the local stellar population. Because they have an apparently universal invariant magnitude cut-off, PNe are also considered to be a remarkable standard candle for distance estimation. Through detecting PNe within the galaxies, we aim to connect the relative abundances of PNe to the properties of their host galaxy stellar population. By removing the stellar background components from FCC 167 and FCC 219, we aim to produce PN luminosity functions (PNLF) of these galaxies, and thereby also estimate the distance modulus to these two systems. Finally, we test the reliability and robustness of our novel detection and analysis method. It detects unresolved point sources by their [OIII] 5007{\AA} emission within regions that have previously been unexplored. We model the [OIII] emissions in the spatial and spectral dimensions together, as afforded to us by the Multi Unit Spectroscopic Explorer (MUSE), and we draw on data gathered as part of the Fornax3D survey. For each source, we inspect the properties of the nebular emission lines to remove other sources that might hinder the safe construction of the PNLF, such as supernova remnants and HII regions. As a further step, we characterise any potential limitations and draw conclusions about the reliability of our modelling approach through a set of simulations. By applying this novel detection and modelling approach to integral field unit observations, we report for the distance estimates and luminosity-specific PNe frequency values for the two galaxies. Furthermore, we include an overview of source contamination, galaxy differences, and possible effects on the PNe populations in the dense stellar environments.

astro-ph.GA↗

arXiv2019

Predicting the global far-infrared SED of galaxies via machine learning techniques

Dust plays an important role in shaping a galaxy's spectral energy distribution (SED). It absorbs ultraviolet (UV) to near-infrared (NIR) radiation and re-emits this energy in the far-infrared (FIR). The FIR is essential to understand dust in galaxies. However, deep FIR observations require a space mission, none of which are still active today. We aim to infer the FIR emission across six Herschel bands, along with dust luminosity, mass, and effective temperature, based on the available UV to mid-infrared (MIR) observations. We also want to estimate the uncertainties of these predictions, compare our method to energy balance SED fitting, and determine possible limitations of the model. We propose a machine learning framework to predict the FIR fluxes from 14 UV-MIR broadband fluxes. We used a low redshift sample by combining DustPedia and H-ATLAS, and extracted Bayesian flux posteriors through SED fitting. We trained shallow neural networks to predict the far-infrared fluxes, uncertainties, and dust properties. We evaluated them on a test set using a root mean square error (RMSE) in log-space. Our results (RMSE = 0.19 dex) significantly outperform UV-MIR energy balance SED fitting (RMSE = 0.38 dex), and are inherently unbiased. We can identify when the predictions are off, for example when the input has large uncertainties on WISE 22, or when the input does not resemble the training set. The galaxies for which we have UV-FIR observations can be used as a blueprint for galaxies that lack FIR data. This results in a 'virtual FIR telescope', which can be applied to large optical-MIR galaxy samples. This helps bridge the gap until the next FIR mission.

astro-ph.GA↗

arXiv2019

Dust emissivity and absorption cross section in DustPedia late-type galaxies

Aims: We compare the far-infrared to sub-millimetre dust emission properties measured in high Galactic latitude cirrus with those determined in a sample of 204 late-type DustPedia galaxies. The aim is to verify if it is appropriate to use Milky Way dust properties to derive dust masses in external galaxies. Methods: We used Herschel observations and atomic and molecular gas masses to estimate the disc-averaged dust emissivity at 250 micrometres, and from this, the absorption cross section per H atom and per dust mass. The emissivity requires one assumption, which is the CO-to-H_2 conversion factor, and the dust temperature is additionally required for the absorption cross section per H atom; yet another constraint on the dust-to-hydrogen ratio D/H, depending on metallicity, is required for the absorption cross section dust mass. Results: We find epsilon(250) = 0.82 +/- 0.07 MJy sr^-1 (1E20 H cm^-2)^-1 for galaxies with 4 < F(250)/F(500) < 5. This depends only weakly on the adopted CO-to-H_2 conversion factor. The value is almost the same as that for the Milky Way at the same colour ratio. Instead, for F(250)/F(500) > 6, epsilon(250) is lower than predicted by its dependence on the heating conditions. The reduction suggests a variation in dust emission properties for spirals of earlier type, higher metallicity, and with a higher fraction of molecular gas. When the standard emission properties of Galactic cirrus are used for these galaxies, their dust masses might be underestimated by up to a factor of two. Values for the absorption cross sections at the Milky Way metallicity are also close to those of the cirrus. Mild trends of the absorption cross sections with metallicity are found, although the results depend on the assumptions made.

astro-ph.GA↗

arXiv2019

The Fornax3D project: Tracing the assembly history of the cluster from the kinematic and line-strength maps

The 31 brightest galaxies (m_B < 15 mag) inside the virial radius of the Fornax cluster were observed from the centres to the outskirts with the Multi Unit Spectroscopic Explorer on the Very Large Telescope. These observations provide detailed high-resolution maps of the line-of-sight kinematics and line strengths of the stars and ionised gas reaching 2-3 Re for 21 early-type galaxies and 1-2 Re for 10 late-type galaxies. The majority of the galaxies are regular rotators, with eight hosting a kinematically distinct core. Only two galaxies are slow rotators. The mean age, total metallicity, and [Mg/Fe] abundance ratio in the bright central region inside 0.5 Re and in the galaxy outskirts are presented. Extended emission-line gas is detected in 13 galaxies, most of them are late-type objects with wide-spread star formation. The measured structural properties are analysed in relation to the galaxies' position in the projected phase space of the cluster. This shows that the Fornax cluster appears to consist of three main groups of galaxies inside the virial radius: the old core; a clump of galaxies, which is aligned with the local large-scale structure and was accreted soon after the formation of the core; and a group of galaxies that fell in more recently.

astro-ph.GA↗

arXiv2019

DustPedia - the relationships between stars, gas and dust for galaxies residing in different environments

We use a sub-set of the DustPedia galaxy sample (461 galaxies) to investigate the effect the environment has had on galaxies. We consider Virgo cluster and field samples and also assign a density contrast parameter to each galaxy, as defined by the local density of SDSS galaxies. We consider their chemical evolution (using M_{Dust}/M_{Baryon} and M_{Gas}/M_{Baryon}), their specific star formation rate (SFR/M_{Stars}), star formation efficiency (SFR/M_{Gas}), stars-to-dust mass ratio (M_{Stars}/M_{Dust}), gas-to-dust mass ratio (M_{Gas}/M_{Dust}) and the relationship between star formation rate per unit mass of dust and dust temperature (SFR/M_{Dust} and T_{Dust}). Late type galaxies (later than Sc) in all of the environments can be modelled using simple closed box chemical evolution and a simple star formation history (SFR(t) \propto t\exp{-t/\tau}). For earlier type galaxies the physical mechanisms that give rise to their properties are clearly much more varied and require a more complicated model (mergers, gas in or outflow). However, we find little or no difference in the properties of galaxies of the same morphological type within the cluster, field or with different density contrasts. It appears that it is morphology, how and whenever this is laid down, and consistent internal physical processes that primarily determine the derived properties of galaxies in the DustPedia sample and not processes related to differences in the local environment.

astro-ph.GA↗

arXiv2019

The Fornax 3D project: Thick disks in a cluster environment

We used deep MUSE observations to perform a stellar-kinematic and population analysis of FCC 153 and FCC 177, two edge-on S0 galaxies in the Fornax cluster. The geometrical definition of the different structural components of these two galaxies allows us to describe the nature of their thick disks. These are both old, relatively metal poor and [Mg/Fe]-enhanced, and their star formation history (SFH) reveals a minor younger component whose chemical properties suggest its later accretion. Moreover, the outer regions of these geometrically defined thick disks show higher values of metallicity and lower values of [Mg/Fe]. These stars probably formed in the thin-disk region and they were dynamically heated to form the flares present in these two galaxies. We propose different formation scenarios for the three populations of these thick disks: in-situ formation, accretion and disk heating. A clear distinction in age is found between the metal poor and [Mg/Fe]-enhanced thick disks (old, $\sim 12-13$ Gyr), and the metal rich and less [Mg/Fe]-enhanced thin disks (young, $\sim 4-5$ Gyr). These two galaxies show signs of relatively recent star formation in their thin disks and nuclear regions. While the thin disks show more continuous SFHs, the nuclei display a rather bursty SFH. These two galaxies are located outside of the densest region of the Fornax cluster where FCC 170 resides. This other edge-on S0 galaxy was studied by \citet{Pinna2019}. We compare and discuss our results with this previous study. The differences between these three galaxies, at different distances from the cluster center, suggest that the environment can have a strong effect on the galaxy evolutionary path.

astro-ph.GA↗

arXiv2019

The Fornax 3D project: a two-dimensional view of the stellar initial mass function in the massive lenticular galaxy FCC 167

The stellar initial mass function (IMF) regulates the baryonic cycle within galaxies, and is a key ingredient to translate observations into physical quantities. Although for decades it was assumed to be universal, there is now growing observational evidence showing that the center of massive early-type galaxies host an enhanced population of low-mass stars compared to the expectations from the Milky Way. Moreover, these variations in the IMF have been found to be related to the radial metallicity variations in massive galaxies. We present here a two-dimensional stellar population analysis of the massive lenticular galaxy FCC 167 (NGC 1380) as part of the Fornax3D project. Using a newly developed stellar population fitting scheme, we derive a full two-dimensional IMF map of an early-type galaxy. This two-dimensional analysis allows us go further than a radial analysis, showing how the metallicity changes along a disc-like structure while the IMF follows a distinct, less disky distribution. Thus, our findings indicate that metallicity cannot be the sole driver of the observed radial IMF variations. In addition, a comparison with the orbital decomposition shows suggestive evidence of a coupling between stellar population properties and the internal dynamical structure of FCC 167, where metallicity and IMF maps seem to track the distribution of cold and warm orbits, respectively.

astro-ph.GA↗

arXiv2019

Old and young stellar populations in DustPedia galaxies and their role in dust heating

Within the framework of the DustPedia project we investigate the properties of cosmic dust and its interaction with the stellar radiation (originating from different stellar populations) for 814 galaxies in the nearby Universe, all observed by the Herschel Space Observatory. We take advantage of the widely used galaxy SED fitting code CIGALE, properly adapted to include the state-of-the-art dust model THEMIS. Using the DustPedia photometry we determine the physical properties of the galaxies, such as, the dust and stellar mass, the star-formation rate, the bolometric luminosity as well as the unattenuated and the absorbed by dust stellar light, for both the old (> 200 Myr) and young (<= 200 Myr) stellar populations. We show how the mass of stars, dust, and atomic gas, as well as the star-formation rate and the dust temperature vary between galaxies of different morphologies and provide recipes to estimate these parameters given their Hubble stage (T). We find a mild correlation between the mass fraction of the small a-C(:H) grains with the specific star-formation rate. On average, young stars are very efficient in heating the dust, with absorption fractions reaching as high as ~77% of the total, unattenuated luminosity of this population. On the other hand, the maximum absorption fraction of old stars is ~24%. Dust heating in early-type galaxies is mainly due to old stars, up to a level of ~90%. Young stars progressively contribute more for `typical' spiral galaxies and they become the dominant source of dust heating for Sm type and irregular galaxies, donating up to ~60% of their luminosity to this purpose. Finally, we find a strong correlation of the dust heating fraction by young stars with morphology and the specific star-formation rate.

astro-ph.GA↗

arXiv2019

A systematic metallicity study of DustPedia galaxies reveals evolution in the dust-to-metal ratios

Observations of evolution in the dust-to-metal ratio allow us to constrain the dominant dust processing mechanisms. In this work, we present a study of the dust-to-metal and dust-to-gas ratios in a sub-sample of ~500 DustPedia galaxies. Using literature and MUSE emission line fluxes, we derived gas-phase metallicities (oxygen abundances) for over 10000 individual regions and determine characteristic metallicities for each galaxy. We study how the relative dust, gas, and metal contents of galaxies evolve by using metallicity and gas fraction as proxies for evolutionary state. The global oxygen abundance and nitrogen-to-oxygen ratio are found to increase monotonically as galaxies evolve. Additionally, unevolved galaxies (gas fraction > 60%, metallicity 12 + log(O/H) < 8.2) have dust-to-metal ratios that are about a factor of 2.1 lower (a factor of six lower for galaxies with gas fraction > 80%) than the typical dust-to-metal ratio (Md/MZ ~ 0.214) for more evolved sources. However, for high gas fractions, the scatter is larger due to larger observational uncertainties as well as a potential dependence of the dust grain growth timescale and supernova dust yield on local conditions and star formation histories. We find chemical evolution models with a strong contribution from dust grain growth describe these observations reasonably well. The dust-to-metal ratio is also found to be lower for low stellar masses and high specific star formation rates (with the exception of some sources undergoing a starburst). Finally, the metallicity gradient correlates weakly with the HI-to-stellar mass ratio, the effective radius and the dust-to-stellar mass ratio, but not with stellar mass.

astro-ph.GA↗

arXiv2019

The Fornax 3D project: unveiling the thick disk origin in FCC 170: signs of accretion?

We present and discuss the stellar kinematics and populations of the S0 galaxy FCC 170 (NGC 1381) in the Fornax cluster, using deep MUSE data from the Fornax 3D survey. We show the maps of the first four moments of the stellar line-of-sight velocity distribution and of the mass-weighted mean stellar age, metallicity and [Mg/Fe] abundance ratio. The high-quality MUSE stellar kinematic measurements unveil the structure of this massive galaxy: a nuclear disk, a bar seen as a boxy bulge with a clear higher-velocity-dispersion X shape, a fast-rotating and flaring thin disk and a slower rotating thick disk. Whereas their overall old age makes it difficult to discuss differences in the formation epoch between these components, we find a clear-cut distinction between metal-rich and less [Mg/Fe]-enhanced populations in the thin-disk, boxy-bulge and nuclear disk, and more metal-poor and [Mg/Fe]-enhanced stars in the thick disk. Located in the densest region of the Fornax cluster, where signs of tidal stripping have been recently found, the evolution of FCC 170 might have been seriously affected by its environment. We discuss the possibility of its "pre-processing" in a subgroup before falling into the present-day cluster, which would have shaped this galaxy a long time ago. The thick disk displays a composite star formation history, as a significant fraction of younger stars co-exist with the main older thick-disk population. The former sub-population is characterized by even lower-metallicity and higher-[Mg/Fe] values, suggesting that these stars formed later and faster in a less chemically evolved satellite, which was subsequently accreted. Finally, we discuss evidence that metal-rich and less [Mg/Fe]-enhanced stars were brought in the outer parts of the thick disk by the flaring of the thin disk.

astro-ph.GA↗

arXiv2018

The Fornax 3D project: dust mix and gas properties in the center of early-type galaxy FCC 167

Galaxies continuously reprocess their interstellar material. One can therefore expect changing dust grain properties in galaxies which have followed different evolutionary pathways. Determining the intrinsic dust grain mix of a galaxy helps in reconstructing its evolutionary history. Early-type galaxies occasionally display regular dust lanes in their central regions. Due to the relatively simple geometry and composition of their stellar bodies, these galaxies are ideal to disentangle dust mix variations from geometric effects. We therefore model the various components of such a galaxy (FCC 167). We reconstruct its recent history, and investigate the possible fate of the dust lane. MUSE and ALMA observations reveal a nested ISM structure. An ionised-gas disk pervades the central regions of FCC 167, including those occupied by the main dust lane. Inward of the dust lane, we also find a disk/ring of cold molecular gas where stars are forming and HII regions contribute to the ionised-gas emission. Further in, the gas ionisation points towards an active galactic nucleus and the fuelling of a central supermassive black hole from its surrounding ionised and molecular reservoir. Observational constraints and radiative transfer models suggest the dust and gas are distributed in a ring-like geometry and the dust mix lacks small grains. The derived dust destruction timescales from sputtering in hot gas are short and we conclude that the dust must be strongly self-shielding and clumpy, or will quickly be eroded and disappear. Our findings show how detailed analysis of individual systems can complement statistical studies of dust-lane ETGs.

astro-ph.GA↗