arXiv subjects

S. Ku

Publications and source records attributed to S. Ku.

At least 19 recordsLinked to original sources

arXiv2026

Mitigation of Initial Transients in Total-f Gyrokinetic Turbulence Simulations Using Neoclassically Relaxed Distribution Function

Total-f five-dimensional gyrokinetic simulations are essential for self-consistent studies of multi-scale, multiphysics transport in the edge region of diverted tokamak plasmas. However, conventional initialization with a local Maxwellian distribution often generates large-amplitude transients, particularly geodesic acoustic modes (GAMs). These transients are especially severe in the plasma edge because of steep profile gradients, strong radial electric fields, and high safety factors, and they increase the computational time required to reach a saturated turbulent state. To address this problem, we present a new initialization scheme for the total-f XGC code that uses a relaxed particle distribution obtained from a computationally inexpensive axisymmetric simulation. Before the distribution is transferred to the full turbulence simulation, phase-space smoothing is applied to reduce particle noise while preserving its neoclassical structure. Applications to the Cyclone Base Case and an ASDEX Upgrade I-mode discharge demonstrate substantial suppression of transient GAMs, reduced particle noise, and a significant reduction in time to solution.

physics.plasm-ph↗

arXiv2025

Difference in Neoclassical Edge Flows Between Strongly Negative and Positive Triangularities in the XGC Gyrokinetic Simulation

The neoclassical baseline study of a strongly negative triangularity (NT) plasma and the corresponding positive triangularity plasma is performed using the edge-specialized, total-f gyrokinetic code XGC. A DIII-D-like plasma is used, based on the negative triangularity discharge of DIII-D \#193793. An artificial positive triangularity (PT) equilibrium has been constructed to compare the edge rotation physics at the same triangularity strength, but with opposite sign, while keeping the same elongation and other geometric parameters. Carbon(+6) ions are added to the deuterium plasma at an experimentally relevant level. By using the experimental profile of carbon toroidal rotation profile as an input, XGC finds that the deuteron rotation is significantly different from the carbon rotation at the inboard and outboard midplanes, mostly caused by the difference in the Pfirsch-Schluter rotation. More importantly, significant difference in the X-point orbit loss physics, thus the rotation source, is found between the positive and negative triangularity equilibrium models. However, it is also found that the agreement between the present neoclassical simulation and the experimental NT data is validated only within the middle of pedestal slope, indicating the importance of edge turbulence. This study could establish baseline for the multiphysics, multiscale studies that include turbulence of negative triangularity plasmas.

physics.plasm-ph↗

arXiv2024

Gyrokinetic prediction of core tungsten peaking in a WEST plasma with nitrogen impurities

Tungsten peaking is predicted in the core of a WEST plasma with total-f gyrokinetic simulations, including both collisional and turbulent transport. This prediction is validated with a synthetic diagnostic of the bolometry. Although nitrogen impurities are shown to reduce the neoclassical peaking of tungsten on-axis, the overall tungsten peaking increases when nitrogen impurities are present, as they reduce the turbulence screening off-axis. This finding is important for the plasma current ramp-up phase of ITER, where light impurities seeding will be desirable to achieve low temperatures at the plasma-facing components and reduce tungsten sputtering. It provides further argument for applying early ECRH heating to maintain margins on the core power balance. The neoclassical peaking factor is cross-verified between XGC and FACIT. The heat flux at separatrix and the heat load width are modeled by XGC and compared to WEST data.

physics.plasm-ph↗

arXiv2024

Metric Lines in the Special Euclidean group on the plane

The Special Euclidean group on the plane $SE(2)$ has the left-invariant sub-Riemannian structure. Every sub-Riemannian manifold possesses a Hamiltonian function governing the sub-Riemannian geodesic flow. Two natural questions are: What are the necessary conditions for periodic sub-Riemannian geodesics? What geodesics are the metric lines in SE(2)? We answer both questions, and our method for the second is an alternative proof using the Hamilton-Jacobi theory.

math.DG↗

arXiv2024

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.

physics.plasm-ph↗

arXiv2023

Intrinsic toroidal rotation driven by turbulent and neoclassical processes in tokamak plasmas from global gyrokinetic simulations

Gyrokinetic tokamak plasmas can exhibit intrinsic toroidal rotation driven by the residual stress. While most studies have attributed the residual stress to the parallel-momentum flux from the turbulent $\boldsymbol{E}\times\boldsymbol{B}$ motion, the parallel-momentum flux from the drift-orbit motion (denoted $\Pi_\parallel^D$) and the $\boldsymbol{E}\times\boldsymbol{B}$-momentum flux from the $\boldsymbol{E}\times\boldsymbol{B}$ motion (denoted $\Pi_{E\times B}$) are often neglected. Here, we use the global total-$f$ gyrokinetic code XGC to study the residual stress in the core and the edge of a DIII-D H-mode plasma. Numerical results show that both $\Pi_\parallel^D$ and $\Pi_{E\times B}$ make up a significant portion of the residual stress. In particular, $\Pi_\parallel^D$ in the core is higher than the collisional neoclassical level in the presence of turbulence, while in the edge it represents an outflux of counter-current momentum even without turbulence. Using a recently developed ``orbit-flux'' formulation, we show that the higher-than-neoclassical-level $\Pi_\parallel^D$ in the core is driven by turbulence, while the outflux of counter-current momentum from the edge is mainly due to collisional ion orbit loss. These results suggest that $\Pi_\parallel^D$ and $\Pi_{E\times B}$ can be important for the study of intrinsic toroidal rotation.

physics.plasm-ph↗

arXiv2023

Neoclassical transport of tungsten ion bundles in total-f neoclassical gyrokinetic simulations of a whole-volume JET-like plasma

The application of a bundling technique to model the diverse charge states of tungsten impurity species in total-f gyrokinetic simulations is demonstrated. The gyrokinetic bundling method strategically groups tungsten ions of similar charge, optimizing computational efficiency. The initial radial configuration of these bundles and their respective charges are derived from a coronal approximation and the quasi-neutrality of the plasma. A low-density JET H-mode like plasma is simulated using the neoclassical version of XGC across the entire plasma volume, spanning from the magnetic axis to the divertor. An accumulation of tungsten is observed at the pedestal top, as a result of low-Z tungsten ions moving inward from the scrape-off-layer (SOL) into the core region and high-Z tungsten ions moving outward from the core into the pedestal. This organization of the fluxes cannot be captured by a single tungsten-ion simulation. Large up-down poloidal asymmetries of tungsten form in the pedestal and strongly influence the direction of neoclassical fluxes. The temperature screening effect and its correlation with asymmetries is analyzed.

physics.plasm-ph↗

arXiv2023

Effects of collisional ion orbit loss on tokamak radial electric field and toroidal rotation in an L-mode plasma

Ion orbit loss has been used to model the formation of a strong negative radial electric field $E_r$ in the tokamak edge, as well as edge momentum transport and toroidal rotation. To quantitatively measure ion orbit loss, an orbit-flux formulation has been developed and numerically applied to the gyrokinetic particle-in-cell code XGC. We study collisional ion orbit loss in an axisymmetric DIII-D L-mode plasma using gyrokinetic ions and drift-kinetic electrons. Numerical simulations, where the plasma density and temperature profiles are maintained through neutral ionization and heating, show the formation of a quasisteady negative $E_r$ in the edge. We have measured a radially outgoing ion gyrocenter flux due to collisional scattering of ions into the loss orbits, which is balanced by the radially incoming ion gyrocenter flux from confined orbits on the collisional time scale. This suggests that collisional ion orbit loss can shift $E_r$ in the negative direction compared to that in plasmas without orbit loss. It is also found that collisional ion orbit loss can contribute to a radially outgoing (counter-current) toroidal-angular-momentum flux, which is not balanced by the toroidal-angular-momentum flux carried by ions on the confined orbits. Therefore, the edge toroidal rotation shifts in the co-current direction on the collisional time scale.

physics.plasm-ph↗

arXiv2021

Effects of collisional ion orbit loss on neoclassical tokamak radial electric fields

Ion orbit loss is considered important for generating the radially inward electric field $E_r$ in a tokamak edge plasma. In particular, this effect is emphasized in diverted tokamaks with a magnetic X point. In neoclassical equilibria, Coulomb collisions can scatter ions onto loss orbits and generate a radially outward current, which in steady state is balanced by the radially inward current from viscosity. To quantitatively measure this loss-orbit current in an edge pedestal, an ion-orbit-flux diagnostic has been implemented in the axisymmetric version of the gyrokinetic particle-in-cell code XGC. As the first application of this diagnostic, a neoclassical DIII-D H-mode plasma is studied using gyrokinetic ions and adiabatic electrons. The validity of the diagnostic is demonstrated by studying the collisional relaxation of $E_r$ in the core. After this demonstration, the loss-orbit current is numerically measured in the edge pedestal in quasisteady state. In this plasma, it is found that the radial electric force on ions from $E_r$ approximately balances the ion radial pressure gradient in the edge pedestal, with the radial force from the plasma flow term being a minor component. The effect of orbit loss on $E_r$ is found to be only mild. How ion orbit loss will affect $E_r$ in the full-current ITER plasma pedestal is left as a subsequent study topic.

physics.plasm-ph↗

arXiv2021

Verification of a Fully Implicit Particle-in-Cell Method for the $v_\parallel$ Formalism of Electromagnetic Gyrokinetics in the XGC Code

A fully implicit particle-in-cell method for handling the $v_\parallel$-formalism of electromagnetic gyrokinetics has been implemented in XGC. By choosing the $v_\parallel$-formalism, we avoid introducing the non-physical skin terms in Amp\`{e}re's law, which are responsible for the well-known ``cancellation problem" in the $p_\parallel$-formalism. The $v_\parallel$-formalism, however, is known to suffer from a numerical instability when explicit time integration schemes are used due to the appearance of a time derivative in the particle equations of motion from the inductive component of the electric field. Here, using the conventional $\delta f$ scheme, we demonstrate that our implicitly discretized algorithm can provide numerically stable simulation results with accurate dispersive properties. We verify the algorithm using a test case for shear Alfv\'{e}n wave propagation in addition to a case demonstrating the ITG-KBM transition. The ITG-KBM transition case is compared to results obtained from other $\delta f$ gyrokinetic codes/schemes, whose verification has already been archived in the literature.

physics.plasm-ph↗

arXiv2020

Constructing a new predictive scaling formula for ITER's divertor heat-load width informed by a simulation-anchored machine learning

Understanding and predicting divertor heat-load width ${\lambda}_q$ is a critically important problem for an easier and more robust operation of ITER with high fusion gain. Previous predictive simulation data for ${\lambda}_q$ using the extreme-scale edge gyrokinetic code XGC1 in the electrostatic limit under attached divertor plasma conditions in three major US tokamaks [C.S. Chang et al., Nucl. Fusion 57, 116023 (2017)] reproduced the Eich and Goldston attached-divertor formula results [formula #14 in T. Eich et al., Nucl. Fusion 53, 093031 (2013); R.J. Goldston, Nucl. Fusion 52, 013009 (2012)], and furthermore predicted over six times wider ${\lambda}_q$ than the maximal Eich and Goldston formula predictions on a full-power (Q = 10) scenario ITER plasma. After adding data from further predictive simulations on a highest current JET and highest-current Alcator C-Mod, a machine learning program is used to identify a new scaling formula for ${\lambda}_q$ as a simple modification to the Eich formula #14, which reproduces the Eich scaling formula for the present tokamaks and which embraces the wide ${\lambda}_q^X{GC}$ for the full-current Q = 10 ITER plasma. The new formula is then successfully tested on three more ITER plasmas: two corresponding to long burning scenarios with Q = 5 and one at low plasma current to be explored in the initial phases of ITER operation. The new physics that gives rise to the wider ${\lambda}q_^{XGC} is identified to be the weakly-collisional, trapped-electron-mode turbulence across the magnetic separatrix, which is known to be an efficient transporter of the electron heat and mass. Electromagnetic turbulence and high-collisionality effects on the new formula are the next study topics for XGC1.

physics.plasm-ph↗

arXiv2020

Comparison of edge turbulence characteristics between DIII-D and C-Mod simulations with XGC1

The physical processes taking place at the edge region are crucial for the operation of tokamaks as they govern the interaction of hot plasma with the vessel walls. Numerical modeling of the edge with state-of-the-art codes attempts to elucidate interactions between neoclassical drifts, turbulence, poloidal and parallel flows that control the physical set-up of the SOL region. Here, we present post-processing analysis of simulations from the gyrokinetic code XGC1, comparing edge turbulence characteristics from a simulation of DIII-D against one of C-Mod. We find that the equilibrium $E \times B$ flux across the separatrix has a similar poloidal pattern in both discharges which can be explained by magnetic drifts and trapped ion excursions. However, collisionality is noted to play a major role in that it prevents local charge accumulations from having global effects in C-Mod. In both cases, turbulent electron heat flux is higher than the ion one. This seems to be a universal characteristic of the tokamak edge. We identify turbulent frequencies and growth rates of the dominant mode in both simulations. In C-Mod, these numbers point to the presence of a drift wave. In DIII-D, linear simulations with Gene reveal a trapped electron mode. Furthermore, we present the amplitude and size distributions of the blobs from both simulations. Amplitude distributions are in qualitative agreement with experimental observations while size distributions are consistent with the fact that most blobs are not connecting to the divertor plates and suggest that they are generated by the shearing of the turbulent modes.

physics.plasm-ph↗

arXiv2018

Analysis of equilibrium and turbulent fluxes across the separatrix in a gyrokinetic simulation

The SOL width is a parameter of paramount importance in modern tokamaks as it controls the power density deposited at the divertor plates, critical for plasma-facing material survivability. An understanding of the parameters controlling it has consequently long been sought (Connor et al. 1999 NF 39 2). Prior to Chang et al.(2017 NF 57 11), studies of the tokamak edge have been mostly confined to reduced fluid models and simplified geometries, leaving out important pieces of physics. Here, we analyze the results of a DIII-D simulation performed with the full-f gyrokinetic code XGC1 which includes both turbulence and neoclassical effects in realistic divertor geometry. More specifically, we calculate the particle and heat ExB fluxes along the separatrix, discriminating between equilibrium and turbulent contributions. We find that the density SOL width is impacted almost exclusively by the turbulent electron flux. In this simulation, the level of edge turbulence is regulated by a mechanism we are only beginning to understand: $\nabla B$-drifts and ion X-point losses at the top and bottom of the machine, along with ion banana orbits at the low field side (LFS), result in a complex poloidal potential structure at the separatrix which is the cause of the ExB drift pattern that we observe. Turbulence is being suppressed by the shear flows that this potential generates. At the same time, turbulence, along with increased edge collisionality and electron inertia, can influence the shape of the potential structure by making the electrons non-adiabatic. Moreover, being the only means through which the electrons can lose confinement, it needs to be in a balance with the original direct ion orbit losses to maintain charge neutrality.

physics.plasm-ph↗

arXiv2017

Pedestal and edge turbulence characteristics from an XGC1 gyrokinetic simulation

Understanding the multi-scale neoclassical and turbulence physics in the edge region (pedestal + scrape-off layer) is required in order to reliably predict performance in future fusion devices. We explore turbulent characteristics in the edge region from a multiscale neoclassical and turbulent XGC1 gyrokinetic simulation in a DIII-D like tokamak geometry, here excluding neutrals and collisions. For an H-mode type plasma with steep pedestal, it is found that the electron density fluctuations increase towards the separatrix, and stay high well into the SOL, reaching a maximum value of $\delta n_e / \bar{n}_e \sim 0.18$. Blobs are observed, born around the magnetic separatrix surface and propagate radially outward with velocities generally less than 1 km/s. Strong poloidal motion of the blobs is also present, near 20 km/s, consistent with $E \times B$ rotation. The electron density fluctuations show a negative skewness in the closed field line pedestal regions, consistent with the presence of "holes", followed by a transition to strong positive skewness across the separatrix and into the SOL. These simulations indicate that not only neoclassical phenomena, but also turbulence, including the blob-generation mechanism, can remain important in the steep H-mode pedestal and SOL. Qualitative comparisons will be made to experimental observations.

physics.plasm-ph↗

arXiv2017

Electrostatic gyrokinetic simulation of global tokamak boundary plasma and the generation of nonlinear intermittent turbulence

Boundary plasma physics plays an important role in tokamak confinement, but is difficult to simulate in a gyrokinetic code due to the scale-inseparable nonlocal multi-physics in magnetic separatrix and open magnetic field geometry. Neutral particles are also an important part of the boundary plasma physics. In the present paper, noble electrostatic gyrokinetic techniques to simulate the flux-driven, low-beta electrostatic boundary plasma is reported. Gyrokinetic ions and drift-kinetic electrons are utilized without scale-separation between the neoclassical and turbulence dynamics. It is found that the nonlinear intermittent turbulence is a natural gyrokinetic phenomenon in the boundary plasma in the vicinity of the magnetic separatrix surface and in the scrape-off layer.

physics.plasm-ph↗

arXiv2017

Gyrokinetic projection of the divertor heat-flux width from present tokamaks to ITER

The XGC1 edge gyrokinetic code is used for a high fidelity prediction for the width of the heat-flux to divertor plates in attached plasma condition. The simulation results are validated against the empirical scaling $\lambda_q \propto B_P^{-\gamma}$ obtained from present tokamak devices, where $\lambda_q$ is the divertor heat-flux width mapped to the outboard midplane and $\gamma_q=1.19$ as defined by T. Eich et al. [Nucl. Fusion 53 (2013) 093031], and $B_P$ is the magnitude of the poloidal magnetic field at outboard midplane separatrix surface. This empirical scaling predicts $\lambda_q \leq 1mm$ when extrapolated to ITER, which would require operation with very high separatrix densities $(n_{sep}/n_{Greenwald} > 0.6)$ in the Q=10 scenario to achieve semi-detached plasma operation and high radiative fractions leading to acceptable divertor power fluxes. XGC1 predicts, however, that $\lambda_q$ for ITER is over 5 mm, suggesting that operation in the ITER Q=10 scenario with acceptable divertor power loads could be obtained over a wider range of plasma separatrix densities and radiative fractions. The physics reason behind this difference is, according to the XGC1 results, that while the ion magnetic drift contribution to the divertor heat-flux width is wider in the present tokamaks, the turbulent electron contribution is wider in ITER. A high current C-Mod discharge is found to be in a mixed regime: While the heat-flux width by the ion neoclassical magnetic drift is still wider than the turbulent electron heat-flux width, the heat-flux magnitude is dominated by the narrower electron heat-flux.

physics.plasm-ph↗

arXiv2017

A fast low-to-high mode bifurcation dynamics in a tokamak edge plasma gyrokinetic simulation

Transport barrier formation and its relation to sheared flows in fluids and plasmas are of fundamental interest in various natural and laboratory observations and of critical importance in achieving an economical energy production in a magnetic fusion device. Here we report the first observation of an edge transport barrier formation event in a gyrokinetic simulation carried out in a realistic tokamak edge geometry. The results show that turbulent Reynolds stress driven sheared ExB flows act in concert with neoclassical orbit loss to quench turbulent transport and form a transport barrier just inside the last closed magnetic flux surface.

physics.plasm-ph↗

arXiv2015

Kinetic modeling of divertor heat load fluxes in the Alcator C-Mod and DIII-D tokamaks

The guiding-center kinetic neoclassical transport code, XGC0, [C.S. Chang et. al, Phys. Plasmas 11, 2649 (2004)] is used to compute the heat fluxes and the heat-load width in the outer divertor plates of Alcator C-Mod and DIII-D tokamaks. The dependence of the width of heat-load fluxes on neoclassical effects, neutral collisions and anomalous transport is investigated using the XGC0 code. The XGC0 code includes realistic X-point geometry, a neutral source model, the effects of collisions, and a diffusion model for anomalous transport. It is observed that width of the XGC0 neoclassical heat-load is approximately inversely proportional to the total plasma current $I_{\rm p}$. The scaling of the width of the divertor heat-load with plasma current is examined for an Alcator C-Mod discharge and four DIII-D discharges. The scaling of the divertor heat-load width with plasma current is found to be weaker in the Alcator C-Mod discharge compared to scaling found in the DIII-D discharges. The effect of neutral collisions on the $1/I_{\rm p}$ scaling of heat-load width is shown not to be significant. Although inclusion of poloidally uniform anomalous transport results in a deviation from the $1/I_{\rm p}$ scaling, the inclusion of the anomalous transport that is driven by ballooning-type instabilities results in recovering the neoclassical $1/I_{\rm p}$ scaling. The Bohm or Gyro-Bohm scalings of anomalous transport does not strongly affect the dependence of the heat-load width on plasma current. The inclusion of anomalous transport, in general, results in widening the width of neoclassical divertor heat-load and enhances the neoclassical heat-load fluxes on the divertor plates. Understanding heat transport in the tokamak scrape-off layer plasmas is important for strengthening the basis for predicting divertor conditions in ITER.

physics.plasm-ph↗