arXiv subjects

S. Jena

Publications and source records attributed to S. Jena.

31 records · Page 2Linked to original sources

arXiv2021

Exploring Neutrino-Nucleus Interactions in the GeV Regime using MINERvA

With the advance of particle accelerator and detector technologies, the neutrino physics landscape is rapidly expanding. As neutrino oscillation experiments enter the intensity and precision frontiers, neutrino-nucleus interaction measurements are providing crucial input. MINERvA is an experiment at Fermilab dedicated to the study of neutrino-nucleus interactions in the regime of incident neutrino energies from one to few GeV. The experiment recorded neutrino and antineutrino scattering data with the NuMI beamline from 2009 to 2019 using the Low-Energy and Medium-Energy beams that peak at 3 GeV and 6 GeV, respectively. This article reviews the broad spectrum of interesting nuclear and particle physics that MINERvA investigations have illuminated. The newfound, detailed knowledge of neutrino interactions with nuclear targets thereby obtained is proving essential to continued progress in the neutrino physics sector.

hep-ex↗

arXiv2021

Rabi-like splitting and refractive index sensing with hybrid Tamm plasmon-cavity modes

Rabi-like splitting and self-referenced refractive index sensing in hybrid plasmonic-1D photonic crystal structures have been theoretically demonstrated. The coupling between Tamm plasmon and cavity photon modes are tuned by incorporating a low refractive index spacer layer adjacent to the metallic layer to form their hybrid modes. Anticrossing of the modes observed at different values of spacer layer thickness validates the strong coupling between the two modes and causes Rabi-like splitting with different splitting energy. Rabi-like splitting energy decreases with increasing number of periods (N) and refractive index contrast (η) of two dielectric materials used to make the 1D photonic crystals, and the observed variation is explained by an analytical model. Angular and polarization dependency of the hybrid modes shows that the polarization splitting of the lower hybrid mode is much stronger than that of the upper hybrid mode. On further investigation, it is seen that one of the hybrid modes remains unchanged while other mode undergoes significant change with varying the cavity medium. This nature of the hybrid modes has been utilized for designing self-referenced refractive index sensors for sensing different analytes. For η=1.333 and N=10 in a hybrid structure, the sensitivity increases from 51 nm/RIU to 201 nm/RIU with increasing cavity thickness from 170 nm to 892 nm. For the fixed cavity thickness of 892 nm, the sensitivity increases from 201 nm/RIU to 259 nm/RIU by increasing η from 1.333 to 1.605. The sensing parameters such as detection accuracy, quality factor, and figure of merit for two different hybrid structures ([η=1.333, N=10] and [η=1.605, N=6]) have been evaluated and compared. The value of resonant reflectivity of one of the hybrid modes changes considerably with varying analyte medium which can be used for refractive index sensing.

physics.optics↗

arXiv2021

An Error Analysis Toolkit for Binned Counting Experiments

We introduce the MINERvA Analysis Toolkit (MAT), a utility for centralizing the handling of systematic uncertainties in HEP analyses. The fundamental utilities of the toolkit are the MnvHnD, a powerful histogram container class, and the systematic Universe classes, which provide a modular implementation of the many universe error analysis approach. These products can be used stand-alone or as part of a complete error analysis prescription. They support the propagation of systematic uncertainty through all stages of analysis, and provide flexibility for an arbitrary level of user customization. This extensible solution to error analysis enables the standardization of systematic uncertainty definitions across an experiment and a transparent user interface to lower the barrier to entry for new analyzers.

hep-ex↗

arXiv2020

PRISA: a simple software for determining refractive index, extinction co-efficient, dispersion energy, band gap, and thickness of semiconductor and dielectric thin films

A simple user-friendly software named PRISA has been developed to determine optical constants (refractive index and extinction co-efficient), dispersion parameters (oscillator energy and dispersion energy), absorption co-efficient, band gap and thickness of semiconductor and dielectric thin films from their measured transmission spectrum, only. The thickness, refractive index, and extinction co-efficient of the films have been derived using Envelope method proposed by Swanepoel. The absorption co-efficient in the strong absorption region is calculated using the method proposed by Connel and Lewis. Subsequently, both direct and indirect bandgap of the films is estimated from the absorption co-efficient spectrum using Tauc plot. The codes for the software are written in Python and the graphical user interface is programmed with tkinter package of Python. It provides convenient input and output of the measured and derived data. The software has a feature to retrieve transmission spectrum using the derived parameters in order to check their reliability. The performance of the software is verified by analyzing numerically generated transmission spectra of a-Si:H amorphous semiconductor thin films, and experimentally measured transmission spectra of electron beam evaporated HfO2 dielectric thin films as examples. PRISA is found to be much simpler and accurate as compared to the other freely available softwares. To help other researchers working on thin films, the software is made freely available at https://www.shuvendujena.tk/download.

cond-mat.mtrl-sci↗

arXiv2020

High-statistics measurement of neutrino quasielastic-like scattering at =~6 GeV on a hydrocarbon target

We measure neutrino charged current quasielastic-like scattering on hydrocarbon at high statistics using the wide-band NuMI beam with neutrino energy peaked at 6 GeV. The double-differential cross section is reported in terms of muon longitudinal and transverse momentum. Cross-section contours versus lepton momentum components are approximately described by a conventional generator-based simulation, however discrepancies are observed for transverse momenta above 0.5 GeV/c for longitudinal momentum ranges 3 to 5 GeV/c and 9 to 20 GeV/c. The single differential cross section versus momentum transfer squared ($dσ/dQ_{QE}^2$) is measured over a four-decade range of $Q^2$ that extends to $10~GeV^2$. The cross section turn-over and fall-off in the $Q^2$ range 0.3 to $10~GeV^2$ is not fully reproduced by generator predictions that rely on dipole form factors. Our measurement probes the axial-vector content of the hadronic current and complements the electromagnetic form factor data obtained using electron-nucleon elastic scattering. These results help oscillation experiments because they probe the importance of various correlations and final-state interaction effects within the nucleus, which have different effects on the visible energy in detectors.

hep-ex↗

arXiv2020

Double-Differential Inclusive Charged-Current $ν_μ$ Cross Sections on Hydrocarbon in MINERvA at $\langle E_ν \rangle \sim$ 3.5 GeV

MINERvA reports inclusive charged-current cross sections for muon neutrinos on hydrocarbon in the NuMI beamline. We measured the double-differential cross section in terms of the longitudinal and transverse muon momenta, as well as the single-differential cross sections in those variables. The data used in this analysis correspond to an exposure of $3.34 \times 10^{20}$ protons on target with a peak neutrino energy of approximately 3.5 GeV. Measurements are compared to the GENIE, NuWro and GiBUU neutrino cross-section predictions, as well as a version of GENIE modified to produce better agreement with prior exclusive MINERvA measurements. None of the models or variants were able to successfully reproduce the data across the entire phase space, which includes areas dominated by each interaction channel.

hep-ex↗

arXiv2019

Tuning the GENIE Pion Production Model with MINERvA Data

Faced with unresolved tensions between neutrino interaction measurements at few-GeV neutrino energies, current experiments are forced to accept large systematic uncertainties to cover discrepancies between their data and model predictions. In this paper, the widely used pion production model in GENIE is compared to four MINERvA charged current pion production measurements using NUISANCE. Tunings, ie, adjustments of model parameters, to help match GENIE to MINERvA and older bubble chamber data are presented here. We find that scattering off nuclear targets as measured in MINERvA is not in good agreement with scattering off nucleon (hydrogen or deuterium) targets in the bubble chamber data. An additional ad hoc correction for the low-$Q^2$ region, where collective effects are expected to be large, is also presented. While these tunings and corrections improve the agreement of GENIE with the data, the modeling is imperfect. The development of these tunings within the NUISANCE frameworkallows for straightforward extensions to other neutrino event generators and models, and allows omitting and including new data sets as they become available.

hep-ex↗

arXiv2019

Neutron measurements from anti-neutrino hydrocarbon reactions

Charged-current anti-neutrino interactions on hydrocarbon scintillator in the MINERvA detector are used to study activity from their final-state neutrons. To ensure that most of the neutrons are from the primary interaction, rather than hadronic reinteractions in the detector, the sample is limited to momentum transfers below 0.8 GeV/c. From 16,129 interactions, 15,246 neutral particle candidates are observed. The reference simulation predicts 64\% of these candidates are due to neutrons from the anti-neutrino interaction directly, but also overpredicts the number of candidates by 15\% overall, which is beyond the standard uncertainty estimates for models of neutrino interactions and neutron propagation in the detector. Using the measured distributions for energy deposition, time of flight, position, and speed, we explore the sensitivity to the details those two aspects of the models. We also use multiplicity distributions to evaluate the presence of a two-nucleon knockout process. These results provide critical new information toward a complete description of the hadronic final state of neutrino interactions, which is vital to neutrino oscillation experiments.

hep-ex↗

arXiv2019

Measurement of $\barν_μ$ charged-current single $π^{-}$ production on hydrocarbon in the few-GeV region using MINERvA

The antineutrino scattering channel $\barν_μ \,\text{CH} \rightarrow μ^{+} \,π^{-} \,X$(nucleon(s)) is analyzed in the incident energy range 1.5 to 10 GeV using the MINERvA detector at Fermilab. Differential cross sections are reported as functions of $μ^{+}$ momentum and production angle, $π^{-}$ kinetic energy and production angle, and antineutrino energy and squared four-momentum transfer. Distribution shapes are generally reproduced by simulations based on the GENIE, NuWro, and GiBUU event generators, however GENIE (GiBUU) overestimates (underestimates) the cross-section normalizations by 8% (10%). Comparisons of data with the GENIE-based reference simulation probe conventional treatments of cross sections and pion intranuclear rescattering. The distribution of non-track vertex energy is used to decompose the signal sample into reaction categories, and cross sections are determined for the exclusive reactions $μ^{+} π^{-} n$ and $ μ^+ π^{-} p$. A similar treatment applied to the published MINERvA sample $\barν_μ \,\text{CH} \rightarrow μ^{+} \,π^{0} \,X$(nucleon(s)) has determined the $μ^{+} π^{0} n$ cross section, and the latter is used with $σ(π^{-} n)$ and $σ(π^{-} p)$ to carry out an isospin decomposition of $\barν_μ$-induced CC($π$). The ratio of magnitudes and relative phase for isospin amplitudes $A_{3}$ and $A_{1}$ thereby obtained are: $R^{\barν} = 0.99 \pm 0.19$ and $ϕ^{\barν} = 93^{\circ} \pm 7^{\circ}$. Our results are in agreement with bubble chamber measurements made four decades ago.

hep-ex↗

arXiv2018

Measurement of Quasielastic-Like Neutrino Scattering at $\left< E_ν\right> \sim 3.5$~ GeV on a Hydrocarbon Target

MINERvA presents a new analysis of neutrino induced quasielastic-like interactions in a hydrocarbon tracking target. We report a double-differential cross section using the muon transverse and longitudinal momentum. In addition, differential cross sections as a function of the square of the four-momentum transferred and the neutrino energy are calculated using a quasielastic hypothesis. Finally, an analysis of energy deposited near the interaction vertex is presented. These results are compared to modified GENIE predictions as well as a NuWro prediction. All results use a dataset produced by $3.34\times10^{20}$ protons on target creating a neutrino beam with a peak energy of approximately 3.5 GeV

hep-ex↗

arXiv2018

Measurement of final-state correlations in neutrino muon-proton mesonless production on hydrocarbon at $\langle E_ν\rangle=3$ GeV

Final-state kinematic imbalances are measured in mesonless production of $ν_μ+ A \to μ^- + p + X$ in the MINERvA tracker. Initial- and final-state nuclear effects are probed using the direction of the $μ^-$-p transverse momentum imbalance and the initial-state momentum of the struck neutron. Differential cross sections are compared to predictions based on current approaches to medium modeling. These models under-predict the cross section at intermediate intranuclear momentum transfers that generally exceed the Fermi momenta. As neutrino interaction models need to correctly incorporate the effect of the nucleus in order to predict neutrino energy resolution in oscillation experiments, this result points to a region of phase space where additional cross section strength is needed in current models, and demonstrates a new technique that would be suitable for use in fine grained liquid argon detectors where the effect of the nucleus may be even larger.

hep-ex↗

arXiv2016

Study of ZrO2 Thin Films Deposited at Glancing Angle by Magnetron Sputtering under Varying Substrate Rotation

In the present work, a set of ZrO2 thin films have been deposited at 82 degree angle of deposition at several substrate rotation speeds and at 0 degree. The effect of substrate rotation on optical, structural, morphological properties and residual stress has been studies thoroughly. Refractive index estimated from ellipsometric measurement and suitable modeling depicts an interesting decreasing behavior with substrate rotation and has been explained in the light of varying columnar structure with substrate rotation. Refractive index of GLAD ZrO2 films varies between and 1.901 to 2.011. Normally deposited film exhibits refractive index value of 2.178 which is substantially greater than that of GLAD films. Lowering in refractive index of glancing angle deposited films is the attribute of dominant atomic shadowing at glancing angles. Further, correlation length which is the representative of surface grain size was obtained from suitable modeling of atomic force microscopy data and it exhibits a decreasing trend with substrate rotation. The trend has also been attributed to the varying columnar microstructure with substrate rotation. All the glancing angle deposited ZrO2 films possess root mean square roughness between 4.6 and 5.1 nm whereas normally deposited film depicts 1.0 nm rms roughness. Dominant atomic shadowing is responsible for high roughness of GLAD films. Both glancing angle and normally deposited films exhibit preferential growth of monoclinic phase oriented in different directions. GLAD films also depict a tetragonal peak which has been attributed to the fine nano-crystallite size (~13 nm). Residual stress depicts a great switching from large compressive to small tensile as the deposition angle switches from normal to glancing angle

cond-mat.mtrl-sci↗

arXiv2014

Structure related optical properties of electron beam evaporated ZrO2:10%SiO2 thin films

ZrO2:10%SiO2 thinfilms have been deposited on fused silica substrate by reactive electron beam co-evaporation technique at different oxygen partial pressure. The structural analysis shows tetragonal phase with residual tensile stress in the films. The intensity of the tetragonal t(110) phase are found increasing with increasing oxygen pressure. The optical band gap is found increasing from 5.06 eV to 5.28 eV because of increasing crystalinity of monoclinic phase, while the film grain size remains almost constant with increase of oxygen pressure, concludes that the crystallite or grain size has no effect on the optical properties of the films. The dispersion of the refractive index is discussed in terms of single oscillator Wimple-DiDomenico model. The dispersion energy parameter better known as structural order parameter are found increasing with the intensity of t(110) phase. It is observed that films having higher value of order parameter show lower surface roughness which concludes that the local microstructure ordering can predominantly influence the grain morphology which in turn can lead to better surface for higher value of order parameter.

cond-mat.mtrl-sci↗