arXiv Science⌕ Search

arXiv subjects

S. Geer

Publications and source records attributed to S. Geer.

At least 19 recordsLinked to original sources
arXiv2017

Roadmap for the international, accelerator-based neutrino programme

In line with its terms of reference the ICFA Neutrino Panel has developed a roadmapfor the international, accelerator-based neutrino programme. A "roadmap discussion document" was presented in May 2016 taking into account the peer-group-consultation described in the Panel's initial report. The "roadmap discussion document" was used to solicit feedback from the neutrino community---and more broadly, the particle- and astroparticle-physics communities---and the various stakeholders in the programme. The roadmap, the conclusions and recommendations presented in this document take into account the comments received following the publication of the roadmap discussion document. With its roadmap the Panel documents the approved objectives and milestones of the experiments that are presently in operation or under construction. Approval, construction and exploitation milestones are presented for experiments that are being considered for approval. The timetable proposed by the proponents is presented for experiments that are not yet being considered formally for approval. Based on this information, the evolution of the precision with which the critical parameters governinger the neutrino are known has been evaluated. Branch or decision points have been identified based on the anticipated evolution in precision. The branch or decision points have in turn been used to identify desirable timelines for the neutrino-nucleus cross section and hadro-production measurements that are required to maximise the integrated scientific output of the programme. The branch points have also been used to identify the timeline for the R&D required to take the programme beyond the horizon of the next generation of experiments. The theory and phenomenology programme, including nuclear theory, required to ensure that maximum benefit is derived from the experimental programme is also discussed.

hep-ex↗
arXiv2015

On the complementarity of Hyper-K and LBNF

The next generation of long-baseline experiments is being designed to make a substantial step in the precision of measurements of neutrino-oscillation probabilities. Two qualitatively different proposals, Hyper-K and LBNF, are being considered for approval. This document outlines the complimentarity between Hyper-K and LBNF.

physics.acc-ph↗
arXiv2014

Initial report from the ICFA Neutrino Panel

In July 2013 ICFA established the Neutrino Panel with the mandate "To promote international cooperation in the development of the accelerator-based neutrino-oscillation program and to promote international collaboration in the development a neutrino factory as a future intense source of neutrinos for particle physics experiments". This, the Panel's Initial Report, presents the conclusions drawn by the Panel from three regional "Town Meetings" that took place between November 2013 and February 2014. After a brief introduction and a short summary of the status of the knowledge of the oscillation parameters, the report summarises the approved programme and identifies opportunities for the development of the field. In its conclusions, the Panel recognises that to maximise the discovery potential of the accelerator-based neutrino-oscillation programme it will be essential to exploit the infrastructures that exist at CERN, FNAL and J-PARC and the expertise and resources that reside in laboratories and institutes around the world. Therefore, in its second year, the Panel will consult with the accelerator-based neutrino-oscillation community and its stakeholders to: develop a road-map for the future accelerator-based neutrino-oscillation programme that exploits the ambitions articulated at CERN, FNAL and J-PARC and includes the programme of measurement and test-beam exposure necessary to ensure the programme is able to realise its potential; develop a proposal for a coordinated "Neutrino RD" programme, the accelerator and detector R&D programme required to underpin the next generation of experiments; and to explore the opportunities for the international collaboration necessary to realise the Neutrino Factory.

physics.acc-ph↗
arXiv2013

Neutrinos

This document represents the response of the Intensity Frontier Neutrino Working Group to the Snowmass charge. We summarize the current status of neutrino physics and identify many exciting future opportunities for studying the properties of neutrinos and for addressing important physics and astrophysics questions with neutrinos.

hep-ex↗
arXiv2012

Muon colliders and neutrino factories

Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate O(1021) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.

physics.acc-ph↗
arXiv2012

Summary of the Superconducting RF Linac for Muon Collider and Neutrino Factory

Project-X is a proposed project to be built at Fermi National Accelerator Laboratory with several potential missions. A primary part of the Project-X accelerator chain is a Superconducting linac, and In October 2009 a workshop was held to concentrate on the linac parameters. The charge of the workshop was to "..focus only on the SRF linac approaches and how it can be used...". The focus of Working Group 2 of this workshop was to evaluate how the different linac options being considered impact the potential realization of Muon Collider (MC) and Neutrino Factory (NF) applications. In particular the working group charge was, "to investigate the use of a multi-megawatt proton linac to target, phase rotate and collect muons to support a muon collider and neutrino factory". To focus the working group discussion, three primary questions were identified early on, to serve as a reference: 1) What are the proton source requirements for muon colliders and neutrino factories? 2) What are the issues with respect to realizing the required muon collider and neutrino factory proton sources? a. General considerations b. Considerations specific to the two linac configurations identified by Project-X. 3) What things need to be done before we can be reasonably confident that ICD1/ICD2 can be upgraded to provide the neutrino factory / muon collider needs? A number of presentations were given, and are available at the workshop web-site. This paper does not summarize the individual presentations, but rather addresses overall findings as related to the three guiding questions listed above.

physics.acc-ph↗
arXiv2011

Interim Design Report

The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires an Interim Design Report to be delivered midway through the project as a step on the way to the RDR. This document, the IDR, has two functions: it marks the point in the IDS-NF at which the emphasis turns to the engineering studies required to deliver the RDR and it documents baseline concepts for the accelerator complex, the neutrino detectors, and the instrumentation systems. The IDS-NF is, in essence, a site-independent study. Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific issues to be addressed in the cost analysis that will be presented in the RDR. The choice of example sites should not be interpreted as implying a preferred choice of site for the facility.

hep-ex↗
arXiv2010

From Neutrino Factory to Muon Collider

Both Muon Colliders and Neutrino Factories require a muon source capable of producing and capturing O(10^21) muons/year. This paper reviews the similarities and differences between Neutrino Factory and Muon Collider accelerator complexes, the ongoing R&D needed for a Muon Collider that goes beyond Neutrino Factory R&D, and some thoughts about how a Neutrino Factory on the CERN site might eventually be upgraded to a Muon Collider.

physics.acc-ph↗
arXiv2006

Using the Fermilab Proton Source for a Muon to Electron Conversion Experiment

The Fermilab proton source is capable of providing 8 GeV protons for both the future long-baseline neutrino program (NuMI), and for a new program of low energy muon experiments. In particular, if the 8 GeV protons are rebunched and then slowly extracted into an external beamline, the resulting proton beam would be suitable for a muon-to-electron conversion experiment designed to improve on the existing sensitivity by three orders of magnitude. We describe a scheme for the required beam manipulations. The scheme uses the Accumulator for momentum stacking, and the Debuncher for bunching and slow extraction. This would permit simultaneous operation of the muon program with the future NuMI program, delivering 10^20 protons per year at 8 GeV for the muon program at the cost of a modest (~10%) reduction in the protons available to the neutrino program.

physics.acc-ph↗
arXiv2006

Physics at a New Fermilab Proton Driver

In 2004, motivated by the recent exciting developments in neutrino physics, the Fermilab Long Range Planning Committee identified a new high intensity Proton Driver as an attractive option for the future. At the end of 2004 the APS ``Study on the Physics of Neutrinos'' concluded that the future U.S. neutrino program should have, as one of its components, ``A proton driver in the megawatt class or above and neutrino superbeam with an appropriate very large detector capable of observing CP violation and measuring the neutrino mass-squared differences and mixing parameters with high precision''. The presently proposed Fermilab Proton Driver is designed to accomplish these goals, and is based on, and would help develop, Linear Collider technology. In this paper the Proton Driver parameters are summarized, and the potential physics program is described.

hep-ph↗
arXiv2005

Physics at an Upgraded Fermilab Proton Driver

In 2004 the Fermilab Long Range Planning Committee identified a new high intensity Proton Driver as an attractive option for the future, primarily motivated by the recent exciting developments in neutrino physics. Over the last few months a physics study has developed the physics case for the Fermilab Proton Driver. The potential physics opportunities are discussed.

hep-ph↗
arXiv2004

Low-energy neutrino beams with an upgraded Fermilab proton driver

The beam properties of low-energy neutrino beams that would be possible at an upgraded 2 MW Fermilab 8 GeV Proton Source are described. In particular three options are considered; (i) a MiniBooNE-like beam using a conventional neutrino horn, (ii) a decay at rest neutrino source, and (iii) a neutrino beam downstream of a solenoid decay channel. In all three cases the fluxes are sufficiently large to provide an interesting physics program. Some physics examples are considered.

hep-ex↗
arXiv2004

Neutral currents and tests of three-neutrino unitarity in long-baseline experiments

We examine a strategy for using neutral current measurements in long-baseline neutrino oscillation experiments to put limits on the existence of more than three light, active neutrinos. We determine the relative contributions of statistics, cross section uncertainties, event misidentification and other systematic errors to the overall uncertainty of these measurements. As specific case studies, we make simulations of beams and detectors that are like the K2K, T2K, and MINOS experiments. We find that the neutral current cross section uncertainty and contamination of the neutral current signal by charge current events allow a sensitivity for determining the presence of sterile neutinos at the 0.10--0.15 level in probablility.

hep-ph↗
arXiv2002

Neutrino Factory Designs and R&D

European, Japanese, and US Neutrino Factory designs are presented. The main R&D issues, and the associated R&D programs, are discussed.

hep-ex↗
arXiv2002

Comparison of LMA and LOW Solar Solution Predictions in an SO(10) GUT Model

Within the framework of an SO(10) GUT model that can accommodate both the LMA and LOW solar neutrino mixing solutions by appropriate choice of the right-handed Majorana matrix elements, we present explicit predictions for the neutrino oscillation parameters Δm^2_{21}, \sin^2 2θ_{12}, \sin^2 2θ_{23}, \sin^2 2θ_{13}, and δ_{CP}. Given the observed near maximality of the atmospheric mixing, the model favors the LMA solution and predicts that δ_{CP} is small. The suitability of Neutrino Superbeams and Neutrino Factories for precision tests of the two model versions is discussed.

hep-ph↗