arXiv ScienceSearch

arXiv subjects

S. Farrens

Publications and source records attributed to S. Farrens.

At least 19 recordsLinked to original sources

Euclid: Galaxy cluster detection through the weak lensing effect - algorithm assessment and selection

Weak gravitational lensing offers a powerful way to detect galaxy clusters by directly tracing their total matter content. Its effectiveness increases with the density of background galaxies, a requirement that is now being met by the high sensitivity and wide coverage of current large-area surveys. A prime example is the Euclid telescope, which will map approximately 14 000 deg2 of the sky, measuring the shapes of billions of galaxies and opening a meaningful window for detecting galaxy clusters uniquely through their weak lensing signal. We present the results of nine galaxy cluster detection algorithms in a blind challenge, using 1200 deg2 of Euclid-like weak lensing observations from the DEMNUni-Cov simulations. The performance of these methods was assessed by matching their detections to known synthetic clusters with signal-to-noise ratios greater than 2, satisfying the z-M selection cut, and adopting two different matching procedures. The purpose of the challenge was to identify and improve strategies for galaxy cluster detection via weak lensing for the upcoming Euclid data releases. We pre-selected four methods based on their individual performance and complementarity. Each pre-selected method adopts a distinct approach: AMICO-WL uses an optimal filtering technique, DoG employs Gaussian filtering, O21 relies on aperture-mass filtering, and W234 applies multi-scale wavelet filtering. Together, the results of these methods can be merged to enhance the processing of Euclid data. Individually, these algorithms reach approximately 10% completeness for a mean purity of 90%, while their combination leads to roughly a two-fold improvement in overall performance, exceeding 70% completeness for low-redshift, high-mass clusters. When extrapolating the results of this work to Euclid Data Release 1, we expect to detect approximately 2500 galaxy clusters via weak gravitational lensing.

astro-ph.CO

FOSSIL: A future mission for CMB spectral distortion measurements

We present FOSSIL, a proposed space mission which is designed to deliver unprecedented absolute spectroscopic measurements of the sky intensity over a broad frequency range (50GHz to 2THz) to accurately measure chemical-potential mu-type, Compton y-type, and Compton relativistic y-type CMB spectral distortions. FOSSIL will reach monopole sensitivities representing a gain of roughly three orders of magnitude over COBE/FIRAS. These capabilities will allow us to constrain primordial density fluctuations on scales k~(10 to 10^4)Mpc^-1, test inflationary models, probe dark matter annihilation/decay/interactions, constrain primordial black hole seed scenarios, and pin down feedback models in galaxy evolution and structure formation by measuring the cosmic thermal energy content. Furthermore, its 130 spectral channels will enable legacy astrophysics, including precise characterisation of the Cosmic Infrared Background, line intensity mapping during cosmic noon, and detailed Galactic dust mapping.

astro-ph.CO

Euclid preparation. XCI. Validation method for the detections in the Euclid Catalogue of Galaxy Clusters using external data

We present our methodology for identifying known clusters as counterparts to objects in the Euclid Catalogue of Galaxy Clusters (ECGC). Euclid is expected to detect a large number of optically-selected galaxy clusters over the approximately 14000 square degrees of its extragalactic sky survey. Extending out well beyond redshift unity, the catalogue will contain many new high-redshift clusters, while at lower redshifts a fraction of the clusters will have been observed in other surveys. Identifying these known clusters as counterparts to the Euclid-detected clusters is an important step in the validation and construction of the ECGC to augment information with external observables. We present a set of catalogues and meta-catalogues of known clusters that we have assembled for this step, and we illustrate their application and our methodology using the Dark Energy Survey Year 1 RedMaPPer cluster catalogue in lieu of the future ECGC. In the process of this work, we have constructed and delivered an updated EC-RedMaPPer catalogue with multi-wavelength counterparts.

astro-ph.CO

Euclid preparation. Testing template-fitting models for the multipoles of the two-point clustering of galaxy clusters

The Euclid satellite will deliver a catalogue of optically selected galaxy clusters spanning from around 2000 deg$^2$ in Data Release (DR) 1 to around $14\,000$ deg$^2$ in DR3. In this work, we assess the validity of cluster clustering (CC) models for template-fitting, which complements the full-shape methodology by providing cosmological information from the anisotropy of the redshift-space two-point correlation function (2PCF). Both methods will be used to analyse the cluster 2PCF multipoles with Euclid. We examined the multipoles of the two-point redshift-space clustering of galaxy clusters simulated with the semi-analytic PINOCCHIO code using third-order Lagrangian perturbation theory, assuming a Euclid DR1-like footprint of 500 deg$^2$ in the northern hemisphere and 1400 deg$^2$ in the southern hemisphere. We estimated the first three even multipoles of the 2PCF and associated covariance matrix from 1000 DR1-like synthetic catalogues. We studied the impact of modelling the relevant non-linearities, halo bias, and photometric redshift uncertainties on the 2PCF. We applied three clustering models to the mock catalogues at 0 10^{14}\;h^{-1}\,M_\odot$ under realistic and optimistic photometric redshift uncertainty scenarios. We formulated a set of permissive and conservative criteria that ought to be fulfilled by the multipole cut-off scales and validated them against 100 mock catalogues via an inference of the growth rate multiplied by the matter power spectrum normalisation parameter, $fσ_8$. We tested the dispersion, Scoccimarro, and Taruya-Nishimichi-Saito models. We find that the dispersion model yields unbiased inferences on $fσ_8$ from CC down to 10 $h^{-1}$ Mpc in a DR1-like setting. All clustering models provide similar goodness-of-fit metrics in the presence of DR1-like cluster redshift uncertainties.

astro-ph.CO

Euclid preparation. CosmoPostProcess: A simulation calibrated framework for weak lensing selection bias in richness-selected galaxy clusters

We present \texttt{CosmoPostProcess}, a simulation-based forward-modelling algorithm calibrated to reproduce Euclid optical cluster observables. Its main deliverable is a correction for stacked surface-density profiles, binned in richness and redshift, accounting for selection systematics in richness-selected samples relative to unbiased references. We focus on the Euclid richness definition foreseen for cosmological analyses, which does not apply a colour selection; red-sequence richness is not considered. The algorithm processes $N$-body simulations by painting galaxies with a halo-occupation model and emulating survey detection and richness assignment. We also implement a novel estimate of optical cluster centres from projected galaxy densities, validated against Euclid pipelines. Baryonic effects are included through a correction calibrated on hydrodynamical simulations; the baryon-corrected excess surface density agrees within \(2\,\%\) over \(r\in[0.1,\,5]\,h^{-1}\,\mathrm{Mpc}\). Selection-bias contributions are assessed by varying cosmology and the mass--richness relation. Projection-induced selection bias follows a robust pattern: correlated large-scale structure projected along the line of sight enhances the stacked profile near the one-halo to two-halo transition, peaking at about \(1\,h^{-1}\,\mathrm{Mpc}\) with an amplitude of \(20\!-\!40\,\%\), depending on richness and redshift. The effect is mild at low and intermediate redshift ($z\lesssim0.7$), at the few-percent level, but becomes more relevant at higher redshift ($z\gtrsim0.7$). Baryonic modifications remain sub-dominant outside the core, at about \(2\,\%\) beyond \(r\gtrsim0.3\,h^{-1}\,\mathrm{Mpc}\). The framework delivers radial profile corrections with uncertainties, combining projection-induced selection bias, baryonic physics, and miscentring, to control systematics in Euclid DR1 cluster cosmology. (abridged)

astro-ph.CO

Euclid: Optimising tomographic redshift binning for 3$\times$2pt power spectrum constraints on dark energy

We present a simulation-based method to explore the optimum tomographic redshift binning strategy for 3x2pt analyses with Euclid, focusing on the expected configuration of its first major data release (DR1). To do this, we 1) simulate a Euclid-like observation and generate mock shear catalogues from multiple realisations of the 3x2pt fields on the sky, and 2) measure the 3x2pt Pseudo-Cl power spectra for a given tomographic configuration and derive the constraints that they place on the standard dark energy equation of state parameters (w0, wa). For a simulation including Gaussian-distributed photometric redshift uncertainty and shape noise under a LambdaCDM cosmology, we find that bins equipopulated with galaxies yield the best constraints on (w0, wa) for an analysis of the full 3x2pt signal, or the angular clustering component only. For the cosmic shear component, the optimum (w0, wa) constraints are achieved by bins equally spaced in fiducial comoving distance. However, the advantage with respect to alternative binning choices is only a few percent in the size of the $1\,σ\,$(w0, wa) contour, and we conclude that the cosmic shear is relatively insensitive to the binning methodology. We find that the information gain extracted on (w0, wa) for any 3x2pt component starts to saturate at $\gtrsim$ 7-8 bins. Any marginal gains resulting from a greater number of bins is likely to be limited by additional uncertainties present in a real measurement, and the increasing demand for accuracy of the covariance matrix. Finally, we consider a 5% contamination from catastrophic photometric redshift outliers and find that, if these errors are not mitigated in the analysis, the bias induced in the 3x2pt signal for 10 equipopulated bins results in dark energy constraints that are inconsistent with the fiducial LambdaCDM cosmology at $>5\,σ$.

astro-ph.CO

Euclid: Measuring the intrinsic alignment of galaxies around cosmic voids in the \Euclid Flagship simulation\

We present a methodology to measure the intrinsic alignment (IA) signal of galaxies in the vicinity of cosmic voids using the \Euclid-like Flagship cosmological simulation from the Euclid Consortium. The IA signal is quantified and compared with the predictions of the linear alignment (LA) model, providing one of the first detailed investigations of this effect in underdense large-scale environments. While the IA signal around cosmic voids has received little attention to date, it may constitute a non-negligible systematic in forthcoming cosmological analyses that exploit void-lensing measurements. Our analysis examines red and blue galaxy populations separately, enabling a comparison of their alignment behaviour in void environments with the corresponding trends measured in galaxy-galaxy correlations. We find that the redshift evolution of the IA amplitude in cosmic voids is broadly consistent with that measured in the general galaxy population for both colour-selected samples. Additionally, our modelling allows us to estimate the linear bias of voids, $b_{\rm V}(z)$ which characterises how cosmic voids trace the underlying dark-matter density field, for voids with radii in the range $10 < R_{\rm V}/(h^{-1} {\rm Mpc}) < 15$. The measured bias exhibits a positive trend with redshift, consistent with theoretical predictions for the clustering of underdense regions. These results highlight the importance of accurately modelling IA in void studies, both to mitigate systematic effects in void-lensing cosmology and to further improve our understanding of galaxy-environment interactions in low-density regions of the Universe.

astro-ph.CO

Euclid: Precise inference of defocus wavefront error from image diffraction spike measurements

The success of the Euclid cosmological weak lensing measurements requires unprecedented knowledge of the point spread function (PSF) shape. Defocus wavefront errors induce variations in PSF size that directly bias inferred galaxy shapes. We present a rapid, model-independent estimator of the Euclid visible instrument defocus based on measuring subpixel shifts in diffraction spikes from bright stars, arising from the non-mirror-symmetric placement of the telescope spiders. This estimate requires no a-priori PSF model and can be directly inferred from individual survey exposures within seconds. We express defocus as the secondary mirror displacement along the optical axis, $Δz$, achieving a per-exposure precision of $σ(Δz) = 0.022\,μ\text{m}$ in standard Euclid wide-survey images, corresponding to a peak-to-valley optical-path difference of $0.75\,\text{nm}$. This sensitivity resolves thermally induced shifts, typically 0.1-0.3$\,μ\text{m}$, and enables tracking of temporal evolution and field-of-view variations when combining exposures within periods of stability. Since July 2024, the Euclid telescope has been exceptionally stable, while changes to defocus are effectively homogeneous across the field of view. By correlating defocus with PSF size, we find that the Euclid DR3 requirement of a fractional PSF size bias of $\left|ΔR_\mathrm{PSF}^2/R_\mathrm{PSF}^2\right|<10^{-3}$ corresponds to field-averaged secondary mirror displacements exceeding $\langle Δz_\mathrm{thr}\rangle = (0.0683 \pm 0.0024)\,μ\text{m}$. Our estimator provides a robust real-time monitoring tool, supplies a stringent prior for computationally intensive PSF model fitting, and is applicable not only to the Euclid telescope, but to other telescopes whose spider vanes are not mirror-symmetrically arranged.

astro-ph.CO

The PAU Survey and Euclid: Analysing photometric redshifts from realistically simulated narrow-band photometry with Flagship 2

The study of the large-scale structure of the Universe and the distribution of galaxies has been greatly advanced by the application of various types of photometric redshift estimation techniques. The Physics of the Accelerating Universe Survey (PAUS) is a state-of-the-art imaging survey, designed to provide high-quality photometric data in 40 optical narrow-band filters. In this paper, we present an in-depth analysis of the photometric redshifts obtained from PAUS using realistic simulations. Based on the Euclid Flagship 2 catalogue, we generate PAUS-like simulations with realistic photometric noise and target selection. The mock catalogue is used to explore the accuracy and precision of photometric redshifts of PAUS, investigating the impact of noise and depth, and combinations of broad- and narrow-band data. The simulations reproduce the observed PAUS performance well, with a robust photometric redshift scatter of $σ_{NMAD}/(1+z)\!=\!0.011$ for a mock subsample resembling the spectroscopic validation sample of the data. For the complete PAUS-like sample, which can only be evaluated in the simulation, we find $σ_{NMAD}/(1+z)\!=\!0.028$ for $i_{\rm AB}\!\lesssim\!23$ and outlier fractions below 10%. Forecasts indicate that including Euclid photometry in a joint analysis could further reduce scatter and outlier fractions, especially for faint galaxy populations. The hypothetical case of deeper PAUS observations over a limited sky area, forecasting the potential for future narrow- or medium-band surveys, in combination with Euclid's deep photometry, achieves scatter as low as $σ_{NMAD}/(1+z)\!=\!0.011$ and outlier fractions below 4% for $i_{\rm AB}\!<\!23.5$.

astro-ph.CO

Euclid. Populating a dark universe with galaxies using SciPIC

High-fidelity galaxy mocks are crucial for validating analysis pipelines and for cosmological inference. In this context, the Science Pipeline at PIC (SciPIC) is a pipeline specifically designed for the fast generation of synthetic galaxy catalogues from the halo properties identified in cosmological simulations. SciPIC delivers galaxy catalogues that aim to reproduce the observed luminosity function and clustering above a given flux detection limit over a wide redshift range. In this work, we introduce SciPICal, an automated pipeline that calibrates the parameters that set the main mock galaxy properties, namely number density, luminosities, colours, and positions. The pipeline is applied to the Euclid Flagship 2 Wide and Deep halo catalogues, specifically built to support the \textit{Euclid} wide and deep surveys. Compared to the recently released Flagship 2 Wide mock, our calibrated version improves the clustering predictions by approximately 50\% based on chi-squared values. Furthermore, we produce the Euclid Deep mock catalogue, which reaches up to $z = 10$ by populating a light-cone and a complementary snapshot at $z = 0$. We validate these catalogues using measurements from spectroscopic and photometric galaxy surveys, as well as with results from a hydrodynamical simulation. The obtained good agreement (within $15\%$ for most of the samples) in the clustering predictions across the different galaxy samples considered, validates our calibration strategy and demonstrates the strong predictive power of the generated mocks. This pipeline will allow us to improve the methodology applied in assigning the galaxy properties and ensures that the galaxy mocks remain up-to-date by incorporating constraints from upcoming observational data in the calibration procedure.

astro-ph.CO

Euclid preparation. CIV. Impact of galaxy intrinsic alignment modelling choices on Euclid 3x2pt cosmology

The Euclid galaxy survey will provide unprecedented constraints on cosmology, but achieving unbiased results will require an optimal characterisation and mitigation of systematic effects. The intrinsic alignments (IAs) of galaxies are one of the dominant contaminants of the weak lensing (WL) and galaxy-galaxy lensing (GGL) probes. In this work, we assess IA modelling choices for Euclid DR1 3x2pt analyses by using synthetic data vectors and comparing the performance of the two most commonly used IA models, non-linear alignment (NLA) and tidal alignment tidal torquing (TATT), along with several variations. Our analyses combine three perspectives: (i) the constraining power on the IA and cosmological parameters for each IA model, (ii) the bias that results when the IA analysis model differs from the model used to generate the synthetic data vector, and (iii) the degeneracies between IAs and photometric redshift (photo-z) nuisance parameters. Amongst the IA models analysed, the redshift-dependent TATT model (zTATT) provides the most flexible description of IAs, with a constraining power similar to simpler IA models, making it a suitable choice for Euclid DR1 3x2pt analyses.

astro-ph.CO

Euclid preparation. CII. Non-Gaussianity of 2-pt statistics likelihood: Parameter inference with a non-Gaussian likelihood in Fourier and configuration space

In this work we account for this skewness in parameter inference by modelling the likelihood through an Edgeworth expansion which involves the complete skewness tensor, composed of 1-point, 2-point, and 3-point correlators. To simplify the calculations of this expansion we perform a change of basis which reduces the precision matrix to the identity. In this basis, the off-diagonal elements of the skewness tensor are consistent with zero, while the amplitude of its diagonal match the level expected for a Gaussian underlying field. We perform parameter inference with this likelihood model and find that including only the diagonal part of the skewness is sufficient, while incorporating the full skewness tensor injects noise without improving accuracy. Despite the estimated excess skewness in the original basis, the cosmological constraints remain effectively unchanged when adopting a Gaussian likelihood or considering the more complete Edgeworth expansion, with variations in the figure of merit of cosmological parameters between the two cases below $5\%$. This result remains unchanged against variations of the survey volume and geometry, scale-cut, and 2-point statistic (power spectrum or correlation function). Using $10\, 000$ cloned \Euclid large mocks based on realistic galaxy catalogues with characteristics close to future \Euclid data, we find no detectable excess skewness on intermediate scales, due to the level of shot noise expected for the \Euclid spectroscopic sample. We conclude that the Gaussian likelihood assumption is robust for \Euclid 2-point statistics analyses in both Fourier and configuration space.

astro-ph.CO

Euclid preparation. Probing galaxy evolution within cosmic voids in Euclid-like simulations

The evolution of galaxies is profoundly influenced by the environment in which they reside. Cosmic voids serve as pristine laboratories for studying galaxy evolution in the relative absence of the complex physical processes that dominate denser environments. In this study, we investigate galaxy properties and merger histories as a function of environment using the GAlaxy Evolution and Assembly (GAEA) mock-observation lightcone replicating the Euclid Deep Survey as foreseen for the first Euclid data release. The H$α$-selected galaxy sample spans the redshift range $0.4 < z < 1.8$, corresponding to the interval over which H$α$ is accessible to Euclid slitless spectroscopy. We classify galaxies based on their void-centric distance and local density contrast, and compare their stellar mass, specific star formation rate, bulge-to-total stellar mass ratio, and halo mass across different environments. We further analyse the merger histories of these galaxies to study their assembly evolution. We find that galaxies located closer to void centres ($d_{\rm cc} \lesssim 0.7 R_{\rm v}$) are less massive, more actively star-forming, and more disc-dominated than galaxies in denser regions. Merger histories indicate that void galaxies do not experience fewer mergers, but rather that mergers occur later relative to galaxies in high-density regions. These results support a scenario in which the environment regulates the timing and nature of mergers rather than their overall frequency, producing a slower evolutionary path in low-density regions. We conclude by discussing the extent to which these trends are shaped by environmental parametrisation methods and observational selection effects. Our analysis provides a framework for interpreting forthcoming Euclid data and demonstrates Euclid's potential to identify cosmic voids and probe environmental effects on galaxy evolution.

astro-ph.GA

Euclid preparation. XCVIII. Cosmology Likelihood for Observables in Euclid (CLOE). 5: Extensions beyond the standard modelling of theoretical probes and systematic effects

Euclid is expected to establish new state-of-the-art constraints on extensions beyond the standard LCDM cosmological model by measuring the positions and shapes of billions of galaxies. Specifically, its goal is to shed light on the nature of dark matter and dark energy. Achieving this requires developing and validating advanced statistical tools and theoretical prediction software capable of testing extensions of the LCDM model. In this work, we describe how the Euclid likelihood pipeline, Cosmology Likelihood for Observables in Euclid (CLOE), has been extended to accommodate alternative cosmological models and to refine the theoretical modelling of Euclid primary probes. In particular, we detail modifications made to CLOE to incorporate the magnification bias term into the spectroscopic two-point correlation function of galaxy clustering. Additionally, we explain the adaptations made to CLOE's implementation of Euclid primary photometric probes to account for massive neutrinos and modified gravity extensions. Finally, we present the validation of these CLOE modifications through dedicated forecasts on synthetic Euclid-like data by sampling the full posterior distribution and comparing with the results of previous literature. In conclusion, we have identified in this work several functionalities with regards to beyond-LCDM modelling that could be further improved within CLOE, and outline potential research directions to enhance pipeline efficiency and flexibility through novel inference and machine learning techniques.

astro-ph.CO

Euclid preparation. XCVI. Cosmology Likelihood for Observables in Euclid (CLOE). 3. Inference and Forecasts

The Euclid mission aims to measure the positions, shapes, and redshifts of over a billion galaxies to provide unprecedented constraints on the nature of dark matter and dark energy. Achieving this goal requires a continuous reassessment of the mission's scientific performance, particularly in terms of its ability to constrain cosmological parameters, as our understanding of how to model large-scale structure observables improves. In this study, we present the first scientific forecasts using CLOE (Cosmology Likelihood for Observables in Euclid), a dedicated Euclid cosmological pipeline developed to support this endeavour. Using advanced Bayesian inference techniques applied to synthetic Euclid-like data, we sample the posterior distribution of cosmological and nuisance parameters across a variety of cosmological models and Euclid primary probes: cosmic shear, angular photometric galaxy clustering, galaxy-galaxy lensing, and spectroscopic galaxy clustering. We validate the capability of CLOE to produce reliable cosmological forecasts, showcasing Euclid's potential to achieve a figure of merit for the dark energy parameters $w_0$ and $w_a$ exceeding 400 when combining all primary probes. Furthermore, we illustrate the behaviour of the posterior probability distribution of the parameters of interest given different priors and scale cuts. Finally, we emphasise the importance of addressing computational challenges, proposing further exploration of innovative data science techniques to efficiently navigate the Euclid high-dimensional parameter space in upcoming cosmological data releases.

astro-ph.CO

Euclid preparation. Refining input galaxy shape distributions for shear calibration simulations

The Euclid Wide Survey (EWS) will cover the majority of the extragalactic sky with a resolution similar to the Hubble Space Telescope. This unprecedented data set will introduce a new era of precision cosmology. However, systematic effects need to be controlled better than ever. One of the sources of systematic uncertainties in weak gravitational lensing are biases introduced during the shear measurement. Determining these biases precisely allows the calibration of cosmological measurements to within Euclid's required accuracy. The simulations that are used to determine such biases, need to resemble the real observations. In this work, we aim to learn distributions of galaxy shape parameters from real Euclid data and use the new information to augment the morphological information in the Flagship galaxy mock catalogue. The morphology is extracted using single and double-Sérsic model fits to the real data, for which we use SourceXtractor++. We train our pipeline on deep Euclid observations of a field with rich auxiliary data and then use it to simulate EWS-like data. In these simulations we compare the multiplicative bias between the morphology from the Flagship catalogue, the trained single-Sérsic morphology, and the trained double-Sérsic morphology. We find that the image simulations with the updated morphology result in a percent-level change in the multiplicative shear bias compared to the original morphology from Flagship. This bias exceeds Euclid's tight error budget by a factor of five and underlines the need for this work. Furthermore, we study the sensitivity of the multiplicative bias to key morphological parameters and show that our approach satisfies the requirements for the cosmology analysis with the first data release of Euclid.

astro-ph.CO

Euclid: Galaxy morphology and photometry from bulge-disc decomposition of Early Release Observations

The background galaxies in Euclid ERO images of the Perseus cluster make up a remarkable sample in its combination of 0.57 deg$^2$ area, 25.3 and 23.2 AB mag depth, as well as 0.1" and 0.3" angular resolutions, in optical and near-IR bands, respectively. We perform a morphological analysis of 2445 and 12,786 galaxies with $I_E < 21$ and $I_E < 23$, respectively. We use single-Sérsic profiles and the sums of a Sérsic bulge and an exponential disc to model these galaxies with SourceXtractor++ and analyse their parameters in order to assess their consistencies and discrepancies. The fitted galaxies to $I_E < 21$ span the various Hubble types with ubiquitous bulge and disc components, and a bulge-to-total light ratio B/T taking all values from 0 to 1. The effective radius of the single-Sérsic profile is an intermediate estimate of galaxy size, between the bulge and disc effective radii, depending on B/T. The axis ratio of the single-Sérsic profile is higher than the disc axis ratio, increasingly so with B/T. The model impacts the photometry with -0.08 to 0.01 mag median systematic $I_E$ offsets between single-Sérsic and bulge+disc total magnitudes, and a 0.05 to 0.15 mag dispersion, from low to high B/T. We measure a median $0.3$ mag bulge-disc colour difference in rest-frame $M_g - M_i$ that originates from the disc-dominated galaxies, whereas bulge-dominated galaxies have similar median colours for their components. We also measure redder-inside disc colour gradients based on 5 to 10$\%$ systematic variations of disc effective radii between the optical and near-IR bands. This analysis demonstrates the usefulness and limitations of single-Sérsic profile modelling and the power of bulge-disc decomposition for characterising the morphology of lenticulars and spirals in Euclid images. We make available the catalogues of best-fit parameters for the morphological and SED fits.

astro-ph.GA

Euclid preparation. LXXXIX. Accurate and precise data-driven angular power spectrum covariances

We develop techniques for generating accurate and precise internal covariances for measurements of clustering and weak-lensing angular power spectra. These methods have been designed to produce non-singular and unbiased covariances for Euclid's large anticipated data vector and will be critical for validation against observational systematic effects. We constructed jackknife segments that are equal in area to a high precision by adapting the binary space partition algorithm to work on arbitrarily shaped regions on the unit sphere. Jackknife estimates of the covariances are internally derived and require no assumptions about cosmology or galaxy population and bias. Our covariance estimation, called DICES (Debiased Internal Covariance Estimation with Shrinkage), first estimated a noisy covariance through conventional delete-1 jackknife resampling. This was followed by linear shrinkage of the empirical correlation matrix towards the Gaussian prediction, rather than linear shrinkage of the covariance matrix. Shrinkage ensures the covariance is non-singular and therefore invertible, which is critical for the estimation of likelihoods and validation. We then applied a delete-2 jackknife bias correction to the diagonal components of the jackknife covariance that removed the general tendency for jackknife error estimates to be biased high. We validated internally derived covariances, which used the jackknife resampling technique, on synthetic Euclid-like lognormal catalogues. We demonstrate that DICES produces accurate, non-singular covariance estimates, with the relative error improving by 33% for the covariance and 48% for the correlation structure in comparison to jackknife estimates. These estimates can be used for highly accurate regression and inference.

astro-ph.CO