arXiv subjects

S. Ding

Publications and source records attributed to S. Ding.

5 recordsLinked to original sources

arXiv2026

Effects of Tungsten Radiative Cooling on Impurity, Heat and Momentum Transport in DIII-D Plasmas

A first-of-its-kind experiment was conducted in the DIII-D tokamak under WEST similarity constraints on plasma shape and core parameters. This work presents a detailed transport study comparing a reference regime dominated by intrinsic carbon radiation and a high-radiation regime resulting from controlled tungsten (W) injection using the Laser Blow-Off system, with a core tungsten concentration $n_{\mathrm{W}}/n_e \sim 3\times 10^{-4}$ and a radiated-power fraction $f_\mathrm{rad}>0.5$. The W-induced radiative cooling lowered the electron temperature, thereby decreasing $T_e/T_i$ and stabilizing trapped-electron-mode (TEM) turbulence. This transition in turbulence regime reduced momentum and ion thermal diffusivities, yielding ion temperature peaking and a factor-of-two increase in toroidal rotation. At the outer plasma region, enhanced $E\timesB$ shear and increased collisionality further suppressed ion-scale turbulence, causing a sharp drop in ion heat flux. Consequently, impurity transport, predominantly turbulent in the low-radiation regime, acquired a strong neoclassical inward W convection during radiative cooling, bootstrapping the cooling cycle. Despite $f_\mathrm{rad}>0.5$, radiative collapse was not observed, likely owing to collisional ion-to-electron energy exchange acting as an electron-energy reservoir, together with $1/1$ MHD activity modulating the radiated power through core impurity neoclassical $T_i$-screening. These results support preparation for a tungsten wall change in DIII-D by elucidating tungsten-induced turbulence stabilization. They also provide key insights for interpreting plasma performance in WEST and are relevant to future reactors expected to operate with radiating tungsten-walled plasmas.

physics.plasm-ph↗

arXiv2025

Sustainable wafer-scale integration of epitaxial ZnO on silicon for piezoelectric devices

To sustainably support the ongoing energetic transition, we need functional metal oxides capable of converting energy, and produce storage, and sensing devices. However, these materials suffer from a high economic cost of manufacturing, and their production in a sustainable way is, to date, a milestone. Additionally, the technical challenges, such as scalability and integration of silicon for industrial processing using microelectronic technologies, impose strict conditions for the entire materials process. In this work, we engineer {\alpha}-quartz virtual substrates up to 4 inches facilitating the large-scale and sustainable integration of multifunctional epitaxial ZnO metal oxide microwire films on silicon. These materials are exclusively manufactured on silicon using solution chemistry, providing single-chip solutions that can meet strict economic constraints for developing sustainable devices at a lower cost. Through this integrative technology, we demonstrate the microfabrication of epitaxial (110)ZnO/(100){\alpha}-quartz/(100)silicon piezoelectric membrane resonators at the wafer-scale with potential applications in energy conversion and sensing. We combined four dimensional (4D)-STEM diffraction technology and Piezoelectric Force Microscopy (PFM) to establish a correlation between out of plane crystalline strain and piezoelectric response in epitaxial (110) ZnO at the microscale. Finally, we proved the fabrication of 800 nm thick (110) ZnO suspended membranes that can be transferred to flexible substrates, making them suitable for flexible devices.

cond-mat.mtrl-sci↗

arXiv2011

Quantum logic for control and manipulation of molecular ions using a frequency comb

Due to their rich level structure, molecules are well-suited for probing time variation of fundamental constants, precisely measuring parity violation and time-reversal non-invariance effects, studying quantum mechanical aspects of chemical reactions, and implementing scalable quantum information processing architectures. Molecular ions are particularly attractive for these applications due to their long storage times and the near-perfect isolation from environment that result in long coherence times required to achieve high measurement precision and reduce systematic errors. However, the control of molecular quantum states remains a challenge. Based on quantum logic techniques, we propose a scheme for preparation, manipulation, and detection of quantum states of single molecular ions. The scheme relies on coherent coupling between internal and motional degrees of freedom of the molecular ion via a frequency comb laser field, while detection and cooling of the motion of ions is done via a co-trapped atomic ion.

quant-ph↗

arXiv2005

High-Pressure Induced Structural Phase Transition in CaCrO4: Evidence from Raman Scattering Studies

Raman spectroscopic studies have been carried out on CaCrO4 under pressure up to 26GPa at ambient temperature. The Raman spectra showed CaCrO4 experienced a continuous structural phase transition started at near 6GPa, and finished at about 10GPa. It is found that the high-pressure phase could be quenched to ambient conditions. Pressure dependence of the Raman peaks suggested there existed four pressure regions related to different structural characters. We discussed these characters and inferred that the nonreversible structural transition in CaCrO4, most likely was from a zircon-type (I41/amd) ambient phase to a scheelite-type high pressure structure (I41/a).

cond-mat.mtrl-sci↗

arXiv2004

Structural Phase Transitions and Sodium Ordering in Na0.5CoO2: a Combined Electron Diffraction and Raman Spectroscopy Study

The nonstoichiometric NaxCoO2 system exhibits extraordinary physical properties that correlate with temperature and Na concentration in its layered lattice without evident long-range structure modification when conventional crystallographic techniques are applied. For instance, Na0.7CoO2, a thermodynamically stable phase, shows large thermoelectric power; water-intercalated Na0.33CoO2.1.3H2O is a newly discovered superconductor with Tc ~ 4K, and Na0.5CoO2 exhibits an unexpected charge ordering transition at around Tco ~ 55 K. Recent studies suggest that the transport and magnetic properties in the NaxCoO2 system strongly depend on the charge carrier density and local structural properties. Here we report a combined variable temperature transmission electron microscopy and Raman scattering investigation on structural transformations in Na0.5CoO2 single crystals. A series of structural phase transitions in the temperature range from 80 K to 1000 K are directly identified and the observed superstructures and modulated phases can be interpreted by Na-ordering. The Raman scattering measurements reveal phase separation and a systematic evolution of active modes along with phase transitions. Our work demonstrates that the high mobility and ordering of sodium cations among the CoO2 layers are a key factor for the presence of complex structural properties in NaxCoO2 materials, and also demonstrate that the combination of electron diffraction and Raman spectroscopy measurements is an efficient way for studying the cation ordering and phase transitions in related systems.

cond-mat.str-el↗