arXiv subjects

S. Devaux

Publications and source records attributed to S. Devaux.

3 recordsLinked to original sources

arXiv2014

Contrasting H-mode behaviour with deuterium fuelling and nitrogen seeding in the all-carbon and metallic versions of JET

The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.

physics.plasm-ph↗

arXiv2013

Characterisation of local ICRF heat loads on the JET ILW

When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the surface temperature increase during the RF phase of L-mode plasmas. The maximum observed heat-flux intensity was ~ 4.5 MW/m2 when operating with -{\pi}/2 current drive strap phasing at power level of 2MW per antenna and with a 4 cm distance between the plasma and the outer limiters. Heat-fluxes are reduced when using dipole strap phasing. The fraction of ICRF power deposited on the antenna limiters or septa was in the range 2-10% for dipole phasing and 10-20% with +/-{\pi}/2 phasing.

physics.plasm-ph↗

arXiv2009

Observation of confined current ribbon in JET plasmas

we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears spontaneously in low density, high rotation plasmas, and can last up to 1.4 s, a time comparable to a local resistive time. It considerably delays the appearance of the first ELM.

physics.plasm-ph↗