arXiv subjects

Ryohei Seto

Publications and source records attributed to Ryohei Seto.

At least 19 recordsLinked to original sources

arXiv2026

Linear stability and viscoelastic response in weakly jammed frictional granular systems

Granular particles typically feature contact friction, which gives rise to various nontrivial properties of granular materials. In this work, we investigate the linear stability of static packings composed of frictional spheres, whose interactions are modeled using the discrete element method. We discuss a key difficulty in properly modeling static friction and address the problem of identifying rattlers. We also explore the spectrum of the energy matrix, which governs the linear viscoelastic response of the system. The intermediate- and high-frequency regimes of the spectrum remain qualitatively independent of both the friction coefficient and the packing fraction.

cond-mat.soft↗

arXiv2025

Taylor Dispersion in Sedimentation of an Axisymmetric Brownian Particle with Centre Offset

When a non-spherical particle sediments, its velocity generally changes in time as the particle orientation changes in time. This gives extra dispersion of the particle position in addition to the thermal Brownian motion. Brenner [J. Colloid Interf. Sci. 1979, 71(2), 189-208] studied this effect and formulated how to calculate the gravity-induced dispersion (called Taylor dispersion in sedimentation). However, he conducted the explicit calculation only for torque-free particles which keep an isotropic orientational distribution in the steady-state. In this paper, we study the effect of the gravitational torque on the Taylor dispersion. We limit the analysis to particles having uniaxial symmetry. In this case, the gravitational torque is caused by the offset $l_{\mathrm{c}}$, the distance between the hydrodynamic centre and the gravitational force centre. The effect of the gravitational torque is represented by a dimensionless parameter $\alpha$ (called the Langevin parameter by Brenner) which is proportional to $l_{\mathrm{c}}$. We obtain analytical expressions for the Taylor diffusivity for the two limits, $\alpha \ll 1 $ and $\alpha \gg 1$. We show that the offset gives a significant effect on the diffusivity and changes the classical scaling of the Taylor dispersion at a large P\'eclet number. We also analyze the transient regime of the mean square displacement (MSD) and show how the crossing time from the ballistic regime to the diffusive regime depends on the gravitational torque.

cond-mat.stat-mech↗

arXiv2024

Numerical Simulations of Spatiotemporal Instabilities in Discontinuous Shear Thickening Fluids

Discontinuous Shear Thickening (DST) fluids exhibit unique instability properties in a wide range of flow conditions. We present numerical simulations of a scalar model for DST fluids in a planar simple shear using the Smoothed Particle Hydrodynamics (SPH) approach. The model reproduces the spatially homogeneous instability mechanism based on the competition between the inertial and microstructural timescales, with good congruence to the theoretical predictions. Spatial inhomogeneities arising from a stress-splitting instability are rationalised within the context of local components of the microstructure evolution. Using this effect, the addition of non-locality in the model is found to produce an alternative mechanism of temporal instabilities, driven by the inhomogeneous pattern formation. The reported arrangement of the microstructure is generally in agreement with the experimental data on gradient pattern formation in DST. Simulations in a parameter space representative of realistic DST materials resulted in aperiodic oscillations in measured shear rate and stress, driven by formation of gap-spanning frictional structures.

physics.flu-dyn↗

arXiv2024

Bending-Rotation coupling in the viscoelasticity of semiflexible polymers -- Rigorous perturbation analysis from the rod limit

Brownian motion and viscoelasticity of semiflexible polymers is a subject that has been studied for many years. Still, rigorous analysis has been hindered due to the difficulty in handling the constraint that polymer chains cannot be stretched along the contour. Here, we show a straightforward method to solve the problem. We consider a stiff polymer that has a persistent length $L_p$ much larger than the contour length $L$. We express the polymer configuration using three types of variables: the position vector of the center of mass $R_c$, the unit vector $n$ along the main axis, and the normal coordinates $u_p$ for bending. Solving the Smoluchowski equation for the distribution function of these variables, we calculate the equilibrium time correlation function $ \langle P(t)\cdot P(0) \rangle$ of the end-to-end vector $P$ and the complex modulus $G^*(\omega)$ of dilute solution. They include the bending effect to the first order in $\theta \equiv L/L_p$ and reduce to the exact results for the rigid rod in the limit of $\theta \to 0$. The rotational diffusion coefficient increases slightly by the semiflexibility because the equilibrium length of the semiflexible polymer is smaller than that of the rigid rod with the same contour length. The storage modulus shows the same asymptotic dependence $G'(\omega) \sim \omega^{3/4}$ predicted by Shankar, Pasquali, and Morse [J. Rheol. 2002, 46, 1111--1154]. The high-frequency viscosity is predicted to be dependent on the thickness of the semiflexible polymers.

cond-mat.soft↗

arXiv2023

Microstructural Smoothed Particle Hydrodynamics Model and Simulations of Discontinuous Shear-Thickening Fluids

Despite the recent interest in the discontinuous shear-thickening (DST) behaviour, few computational works tackle the rich hydrodynamics of these fluids. In this work, we present the first implementation of a microstructural DST model in Smoothed Particle Hydrodynamic (SPH) simulation. The scalar model was implemented in an SPH scheme and tested in two flow geometries. Three distinct ratios of local to non-local microstructural effects were probed: weak, moderate, and strong non-locality. Strong and moderate cases yielded excellent agreement with flow curves constructed via the Wyart--Cates (WC) model, with the moderate case exhibiting banding patterns. Weak non-locality produced stress-splitting instability, resulting in discontinuous stress fields and poor agreement with the WC model. The mechanism of the stress-splitting has been explored and contextualised by the interaction of local microstructure evolution and the stress-control scheme. Velocity profiles obtained in body force-driven channel flow were found to be in excellent agreement with the analytical solution, yielding an upward inflection corresponding to the typical S-curve. Simulations carried out at increasing driving forces exhibited a decrease in flow. We showed that even the simple scalar model can capture some of the key properties of DST materials, laying the foundation for further SPH study of instabilities and pattern formation.

physics.flu-dyn↗

arXiv2023

Ridge instability in dense suspensions caused by the second normal stress difference

A dense suspension of the cornstarch flowing on a very inclined wall finally forms some ridge-like patterns of the free surface. The onset of pattern formation is the primary target to elucidate the mechanism. In this work, based on the continuity of fluids and the force balance, we show that the flat free surface is unstable when the second normal stress difference $N_2$ is negatively proportional to shear stress and the gravity component perpendicular to the wall is weak enough. Such instability is inevitable to grow into a ridge-like surface profile oriented parallel to the flow direction. We use the instability criterion to predict the critical slope angle for the formation of ridge patterns. The estimated critical angle was found to be in agreement with experimental observations for a cornstarch suspension.

cond-mat.soft↗

arXiv2023

Filled Colloidal Gel Rheology: Strengthening, Stiffening, and Tunability

Filler-induced strengthening is ubiquitous in materials science and is particularly well-established in polymeric nanocomposites. Despite having similar constituents, colloidal gels with solid filling exhibit distinct rheology, which is of practical interest to industry (e.g., lithium-ion batteries) yet remains poorly understood. We show, using experiments and simulations, that filling monotonically enhances the yield stress (i.e., strength) of colloidal gels while the elastic modulus (i.e., stiffness) first increases and then decreases. The latter softening effect results from a frustrated gel matrix at dense filling, evidenced by a growing inter-phase pressure. This structural frustration is, however, not detrimental to yielding resistance. Instead, fillers offer additional mechanical support to the gel backbone via percolating force chains, decreasing the yield strain at the same time. We develop a mechanistic picture of this phenomenology that leads us to a novel `filler-removal protocol,' making individual control over the strength and brittleness of a composite gel possible.

cond-mat.soft↗

arXiv2022

Colloidal Gelation with Non-Sticky Particles

Colloidal gels are widely applied in industry due to their rheological character -- no flow takes place below the yield stress. Such property enables gels to maintain uniform distribution in practical formulations; otherwise, solid components may quickly sediment without the support of gel matrix. Compared with pure gels of sticky colloids, therefore, the composites of gel and non-sticky inclusions are more commonly encountered in reality. Through numerical simulations, we investigate the gelation process in such binary composites. We find that the non-sticky particles not only confine gelation in the form of an effective volume fraction, but also introduce another lengthscale that competes with the size of growing clusters in gel. The ratio of two key lengthscales in general controls the two effects. Using different gel models, we verify such a scenario within a wide range of parameter space, suggesting a potential universality in all classes of colloidal composites.

cond-mat.soft↗

arXiv2022

How Surface Roughness Affects the Interparticle Interactions at a Liquid Interface

Shapes of colloids matter at liquid interfaces. We explore the interactions between rough-surfaced nanocolloids at the air--water interface through the compaction of monolayers experimentally and numerically. Sufficiently rough systems exhibit a non-trivial intermediate state between a gas-like state and a close-packed jamming state due to roughness-induced capillary attraction. We also find that roughness-induced friction lowers the jamming point, and the tangential contact force owing to surface asperities can cause a gradual off-plane collapse of the compressed monolayer.

cond-mat.soft↗

arXiv2022

Odd Viscosity in Chiral Passive Suspensions

Prior studies have revealed that nonzero odd viscosity is an essential property for chiral active fluids. Here we report that such an odd viscosity also exists in suspensions of non-active or non-externally-driven but chirally-shaped particles. Computational simulations are carried out for monolayers of dense ratchets in simple shear and planar extensional flows. The contact between two ratchets can be either frictionless or infinitely-frictional, depending on their teeth and sliding directions at the contact point. Our results show that the ratchet suspension has the intermediate shear/extensional viscosity as compared with the suspensions of smooth and gear-like particles. Meanwhile, the ratchet suspensions show nonzero even and odd components of the first normal stress coefficient, which indicates the mixed feature of conventional complex fluids and chiral viscous fluids.

cond-mat.soft↗

arXiv2021

Emergent Stripes of Active Rotors in Shear Flows

The shear-induced self-organization of active rotors into stripy aggregates is studied by carrying out computational simulations. The rotors, modeled by monolayers of frictional spheres, develop to stripy microstructures only when they counterrotate with respect to the vorticity of the imposed shear flow. The average width of the stripes is demonstrated to be linearly dependent on the relative intensity of active torque to the shear rate. By giving insight into three collective particle behaviors, i.e., shear-induced diffusion, rotation-induced rearrangement, and edge flows, we explain the mechanisms of formation of the particle stripes. Additionally, the rheological result shows the dependence of shear and rotational viscosities on the active torque direction and the oddness of the normal stress response. By exhibiting a collective phenomenon of active rotors, our study paves the way to understanding chiral active matter.

cond-mat.soft↗

arXiv2021

The physics of dense suspensions

Dense suspensions of particles are relevant to many applications and are a key platform for developing a fundamental physics of out-of-equilibrium systems. They present challenging flow properties, apparently turning from liquid to solid upon small changes in composition or, intriguingly, in the driving forces applied to them. The emergent physics close to the ubiquitous jamming transition (and to some extent the glass and gelation transitions) provides common principles with which to achieve a consistent interpretation of a vast set of phenomena reported in the literature. In light of this, we review the current state of understanding regarding the relation between the physics at the particle scale and the rheology at the macroscopic scale. We further show how this perspective opens new avenues for the development of continuum models for dense suspensions.

cond-mat.soft↗

arXiv2021

Shear jamming and fragility of suspensions in a continuum model with elastic constraints

Under an applied traction, highly concentrated suspensions of solid particles in fluids can turn from a state in which they flow to a state in which they counteract the traction as an elastic solid: a shear-jammed state. Remarkably, the suspension can turn back to the flowing state simply by inverting the traction. A tensorial model is presented and tested in paradigmatic cases. We show that, to reproduce the phenomenology of shear jamming in generic geometries, it is necessary to link this effect to the elastic response supported by the suspension microstructure rather than to a divergence of the viscosity.

cond-mat.soft↗

arXiv2020

Predictions of microstructure and stress in planar extensional flows of a dense viscous suspension

We consider extensional flows of a dense layer of spheres in a viscous fluid and employ force and torque balances to determine the trajectory of particle pairs that contribute to the stress. In doing this, we use Stokesian dynamics simulations to guide the choice of the near-contacting pairs that follow such a trajectory. We specify the boundary conditions on the representative trajectory, and determine the distribution of particles along it and how the stress depends on the microstructure and strain rate. We test the resulting predictions using the numerical simulations. Also, we show that the relation between the tensors of stress and strain rate involves the second and fourth moments of the particle distribution function.

physics.flu-dyn↗

arXiv2020

Shear thickening and jamming of dense suspensions: the "roll" of friction

Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shapes. It sets a distinct structure of the frictional force network compared to only sliding friction, and from a dynamical perspective leads to an increase in the velocity correlation length, in part responsible for the increased viscosity. The physics of rolling friction is thus a key element in achieving a comprehensive understanding of strongly shear-thickening materials.

cond-mat.soft↗

arXiv2019

Force transmission and the order parameter of shear thickening

The origin of the abrupt shear thickening observed in some dense suspensions has been recently argued to be a transition from frictionless (lubricated) to frictional interactions between immersed particles. The Wyart-Cates rheological model, built on this scenario, introduced the concept of fraction of frictional contacts $f$ as the relevant order parameter for the shear thickening transition. Central to the model is the "equation-of-state" relating $f$ to the applied stress $\sigma$, which is directly linked to the distribution of the normal components of non-hydrodynamics interparticle forces. Here, we develop a model for this force distribution, based on the so-called $q$-model that we borrow from granular physics. This model explains the known $f(\sigma)$ in the simple case of sphere contacts displaying only sliding friction, but also predicts strong deviation from this "usual" form when stronger kinds of constraints are applied on relative motion. We verify these predictions in the case of contacts with rolling friction, in particular a broadening of the stress range over which shear thickening occurs. We finally discuss how a similar approach can be followed to predict $f(\sigma)$ in systems with other variations from the canonical system of monodisperse spheres with sliding friction, in particular the case of large bidispersity.

cond-mat.soft↗

arXiv2019

Shear jamming and fragility in dense suspensions

The phenomenon of shear-induced jamming is a factor in the complex rheological behavior of dense suspensions. Such shear-jammed states are fragile, i.e., they are not stable against applied stresses that are incompatible with the stress imposed to create them. This peculiar flow-history dependence of the stress response is due to flow-induced microstructures. To examine jammed states realized under constant shear stress, we perform dynamic simulations of non-Brownian particles with frictional contact forces and hydrodynamic lubrication forces. We find clear signatures that distinguish these fragile states from the more conventional isotropic jammed states.

cond-mat.soft↗

arXiv2018

Normal stress differences in dense suspensions

The presence and the microscopic origin of normal stress differences in dense suspensions under simple shear flows are investigated by means of inertialess particle dynamics simulations, taking into account hydrodynamic lubrication and frictional contact forces. The synergic action of hydrodynamic and contact forces between the suspended particles is found to be the origin of negative contributions to the first normal stress difference $N_1$, whereas positive values of $N_1$ observed at higher volume fractions near jamming are due to effects that cannot be accounted for in the hard-sphere limit. Furthermore, we found that the stress anisotropy induced by the planarity of the simple shear flow vanishes as the volume fraction approaches the jamming point for frictionless particles, while it remains finite for the case of frictional particles.

cond-mat.soft↗