arXiv Science⌕ Search

arXiv subjects

Rylan Malarchick

Publications and source records attributed to Rylan Malarchick.

8 recordsLinked to original sources

Latency-Preserving Rewrites and Translation Validation for Dynamic Quantum Circuits

A dynamic quantum circuit measures qubits during a run and chooses later operations from the outcomes. These branches make the qubits wait: the outcome must reach the classical controller, and the controller must decide. We present qlin, a compiler that reduces this waiting time. qlin moves operations out of branches without delaying the program, a property proved in Lean 4. For error-correction decoders, which branch on syndromes that are almost always zero, qlin compiles the likely syndromes into one multiway branch and keeps the original program for the rest. A cost model decides when a classically controlled gate should become a quantum-controlled gate instead. On all benchmarks, qlin checks that the compiled program computes what its source computes, and the checker is proved sound in Lean 4. At the published per-decision cost of the QICK controller (42 ns), 10 of 65 programs run at least 10% faster than the best baseline in our cost model, up to 91.2%, mostly because one multiway branch replaces a long chain of if statements. On the register-transfer logic of the QubiC controller, a compiled distance-5 repetition decoder selects its correction in 21.3 instead of 151.1 expected cycles. Timing runs on an IBM device were too noisy to confirm or reject the model's ranking.

quant-ph↗

Design-Time Conformance Checking for Pulse-Level Quantum Control

A pulse-level quantum control program is written against a device whose limits are recorded, if at all, in vendor documentation and source code. A program that exceeds them can be refused at compile time. It can also be accepted and silently altered, or compile and then fail at the board. In the last two cases the experiment runs, and the data does not correspond to the program that was written. We present qconform, a checker that decides whether a pulse program is realizable on a device, given a versioned capability descriptor for that device. Every constraint in a descriptor cites the toolchain observation that established it. The checker is design-time, offline, and deterministic, and it uses no floating point. It reports a verdict, the rules it applied, and a coverage manifest that names what it did not check. We evaluate qconform by differential testing against the QICK and Qblox toolchains, on three QICK board configurations and one Qblox cluster. Over 1263 program runs of 969 distinct programs, the checker accepted no program that a toolchain refuses. On both vendors, a descriptor pinned to one toolchain release accepts programs that older releases refuse. The evaluation also found ten defects in the checker and its descriptors, all fixed.

quant-ph↗

Parallelizing the Variational Quantum Eigensolver: From JIT Compilation to Multi-GPU Scaling

The Variational Quantum Eigensolver (VQE) is a hybrid quantum-classical algorithm for ground-state energies of molecular systems. We compute the potential energy surface of the hydrogen molecule (H2) at 100 bond lengths with PennyLane on the ERAU Vega cluster (AMD EPYC 9654 CPUs, 4 NVIDIA H100 GPUs) and compare a serial baseline, an Optax and Catalyst JIT version, a lightning.gpu version, and an MPI version. Early stopping, a larger learning rate, and warm starts reduce the iteration count from 30,000 to 7,033 and the runtime from 593.95 s to 143.80 s, while the time per iteration stays between 0.0198 s and 0.0204 s. At 4 qubits, lightning.gpu lowers the time per iteration to 0.0145 s. MPI runs with 2 to 32 ranks finish in 8.45 s to 5.04 s; the serial and MPI jobs ran under different core allocations, so we do not report their ratio as a parallel speedup. In a 4 to 26 qubit study with different CPU and GPU software stacks, the CPU/GPU time ratio ranges from 3.5 to 81.5. One H100 runs up to 29 qubits.

quant-ph↗

Hardware-Aware Performance Characterization of Small Dense Lindblad Propagation for Near-Term Quantum Control

Dense Lindblad propagation at the Hilbert-space sizes of near-term transmon control ($d = 3$, $9$, $27$) sits in a regime where cache boundaries, launch overhead, and fixed latency decide which hardware is useful, not peak arithmetic rate. This paper characterizes that regime on two x86 CPUs, two NVIDIA GPUs, and a low-cost FPGA. Each implementation is stated as an algorithm in $d$ with an idealized cost built from separately measured ceilings, and the measured gaps are attributed to specific mechanisms: thread fork/join, the strided read of the propagator, PCI Express (PCIe) transfers, and propagator re-upload. An end-to-end gradient-ascent (GRAPE-style) benchmark against released QuTiP 5.2.3 shows that fast propagation does not imply fast control optimization: the C path wins by up to two orders of magnitude at $d = 3$ but loses at $d = 27$, where the dense LU solve inside the Padé propagator build takes over $90\%$ of the cost. The FPGA contributes a deterministic-latency operating point, $95$ cycles per step at a stress-characterized $108$ MHz with zero cycle spread over $1000$ trials, and its Q1.15 fixed-point drift is measured on the device. The results are a map of operating regimes for the measured grid, with the propagator build, not propagation, as the dominant cost at the largest size.

quant-ph↗

The verifier side of speculative window decoding: a predictability bracket, a machine-checked blast-radius bound, and a decoder-agnostic recover loop

Speculative window decoders hide quantum error-correction decoder latency by guessing the cross-boundary decisions that link adjacent decoding windows, running downstream work on the guess, and verifying lazily. SWIPER and ARTERY each build one predictor, about 90% accurate; neither built the verifier side. We build it on a reconstructed SWIPER harness (Stim rotated surface code, minimum-weight matching). A predictor-only bracket shows the cross-boundary decision is local, the achievable accuracy reaching about 0.999 within three rounds, with small, diffuse headroom over SWIPER. We establish a worst-case temporal blast-radius bound, its probability core machine-checked in Lean4 and conditional on a modeling reduction we then test: a misprediction's effect decays exponentially in the commit width, so the radius is one and speculation adds no error floor. We falsify that reduction shot by shot and find the real mechanism, clearest at near-threshold noise, is a global minimum-weight re-pairing. A compiler pass derives SWIPER's restart policy from these numbers; a runtime executor confirms on the harness that the loop recovers exactly and removes the serial commit-chain stall up to a small penalty. A second decoder (union-find) settles which results are decoder-agnostic: the predict-verify-recover wrapper and the structural phenomenology, while the absolute magnitudes and the min-weight mechanism are matching-specific.

quant-ph↗

Measuring Control-Plane Openness in Near-Term Quantum Computing: A Rubric, Its Validation, and an Application to Thirteen Vendor Stacks

Public access to pulse-level and control-electronics interfaces in commercial quantum computing has bifurcated. This paper proposes a six-axis rubric for measuring control-plane openness, the layer between gate-level circuit specification and physical control electronics, defined operationally so that the same evidence produces the same grade across vendors. The rubric is validated three ways: a blinded re-grading pass that tests whether the cited evidence and the level definitions alone reproduce the recorded grades, a boundary-case methodology that fixes where each level begins and ends, and a published grading protocol that lets others reproduce and contest any cell. A time-point comparison anchored on the February 2025 removal of pulse-level access from IBM hardware establishes that the rubric measures change rather than describing a snapshot. The rubric is applied to thirteen commercial vendors across superconducting, trapped-ion, neutral-atom, and photonic modalities as of May 1, 2026, and one of the three harms it detects is demonstrated through a reproduction-access audit of five pre-2025 IBM Qiskit Pulse experiments, carried through to a structural port to Rigetti Quil-T. The catalog ships as a machine-readable artifact under CC-BY-4.0 with per-cell source URLs (https://doi.org/10.5281/zenodo.20163276). The readings will go stale; the rubric is the contribution that survives them.

quant-ph↗

End-to-End Fidelity Analysis of Quantum Circuit Optimization: From Gate-Level Transformations to Pulse-Level Control

We present an analysis of quantum circuit fidelity across the full compilation stack, from high-level gate optimization through pulse-level control. We connect a C++ circuit optimizer to a per-gate Lindblad master-equation fidelity model whose decoherence channels are cross-validated against qiskit-dynamics and whose absolute predictions are benchmarked against execution on real hardware. Across a campaign of 4,452 experiment runs over 371 benchmark circuits, gate cancellation provides the dominant improvement ($d = 1.66$, 72% of circuits improved), while circuit size and pulse duration are the strongest negative predictors of process fidelity (input gates $r = -0.78$; pulse duration $r = -0.73$, $R^2 = 0.53$). A formal ablation study shows that pass ordering has no significant effect on two-qubit gate reduction (Kruskal--Wallis $p = 0.302$). Comparing against Qiskit transpilation levels, we show that two-qubit gate count, not total gate count, is the hardware-relevant metric: our optimizer attains superior two-qubit reduction on structured circuits (87.8% on QFT, 100% on QAOA) whereas Qiskit's larger total-gate reduction is dominated by single-qubit ($u_3$) consolidation. Finally, executing eight circuits on the IQM Resonance Garnet processor (8/8 jobs completed, job identifiers released) reveals that the model is a consistent upper bound: it preserves the relative difficulty ordering of circuits but overestimates absolute fidelity by a mean of 0.49, quantifying the error budget (crosstalk, leakage, readout) outside a $T_1$/$T_2$/depolarizing model. We release the framework, data, and scripts as open source.

quant-ph↗

When does numerical pulse optimization actually help? Error budgets,robustness tradeoffs, and calibration guidance for transmon single-qubit gates

Numerical optimal control (GRAPE) can in principle discover pulse shapes that suppress all coherent gate error to machine precision. But when does that capability actually matter? We present a systematic comparison of Gaussian, DRAG, and GRAPE pulses for single-qubit gates on a three-level transmon model parameterized by IQM Garnet hardware ($T_1 = 37\,μ$s, $T_2 = 9.6\,μ$s,$α/2π= -200$ MHz), with the explicit goal of identifying the regimes where numerical optimization provides genuine practical advantage over analytical methods. Our central finding is that properly calibrated DRAG already operates near the decoherence floor. At 20 ns gate time, GRAPE eliminates all coherent error ($1 - F < 10^{-15}$), but DRAG achieves $1 - F = 4.9 \times 10^{-4}$ in coherent error alone,and $8.4 \times 10^{-4}$ under full decoherence -- only $1.2\times$ above GRAPE's decoherence-limited performance. More surprisingly,DRAG is \emph{more robust} than GRAPE to qubit frequency detuning (minimum fidelity 0.990 vs.\ 0.931 over $\pm 5$ MHz), the dominant calibration uncertainty in charge-noise-limited transmons. GRAPE retains superior amplitude robustness (minimum fidelity 0.994 vs.\ 0.990) and provides the only route to guaranteed zero coherent error, which matters at short gate times ($\lesssim 15$ ns) where perturbative corrections break down. These results lead to concrete calibration guidance: (1) properly calibrated DRAG is sufficient for gate times $\gtrsim 20$ ns on hardware with $T_2/T \gtrsim 500$, (2) GRAPE is necessary at short gate times or when targeting error rates well below the decoherence floor, and (3) robust optimal control incorporating frequency uncertainty should be used when detuning is the dominant noise source. We decompose the full error budget (coherent, $T_1$, $T_2$, control noise) and provide the open-source QubitPulseOpt framework for reproducing all results.

quant-ph↗