arXiv subjects

Ryan Griffiths

Publications and source records attributed to Ryan Griffiths.

8 recordsLinked to original sources

arXiv2026

Comparing the contrast performance of two IFU technologies for exoplanet direct imaging with ELT-PCS

A key science goal for the Planetary Camera and Spectrograph (ELT-PCS) instrument is to image rocky exoplanets in reflected light around nearby M- and K-dwarfs. These observations will require a contrast of 10^(-9) at 100 mas angular separation, and 10^(-8) at 10 mas. To achieve such an extreme performance, every instrument design choice must be carefully evaluated. For ELT-PCS's science instruments, perhaps the most critical design choice is which integral field unit (IFU) technology to use. To this end, we have developed a modular, lab-based integral field spectrograph test bench with which to compare the performance of two popular IFU technologies: image slicers and lenslet arrays. The test bench implements a Lyot coronagraph and a spatial light modulator to simulate a high-contrast imaging system, which feeds each IFU with a diffraction-limited PSF image. Each IFU is coupled to the spectrograph, which achieves R ~ 3000 with the image slicer and R ~ 100 with the lenslet array. The calibration and data reduction for each IFU design are described and the initial results of a contrast comparison are presented. The lenslet array achieves a deeper contrast at angular separations of less than 6 lambda/D. The image slicer, however, gains more at small separations from applying spectral deconvolution, with a 3.4x greater gain at 4 lambda/D. Spectral deconvolution further yields a contrast curve close to the detector noise floor. Further work will focus on carrying out a fully-controlled characterisation of the lenslet array IFU and a more comprehensive study into the effects of adaptive optics residuals on the contrast.

astro-ph.IM↗

arXiv2026

HARMONI at ELT: line spread functions in a diffraction limited spectrometer

HARMONI is the first light, adaptive optics assisted, near-IR integral field spectrograph for the ELT. It covers a spectral range from 800~nm to 2450~nm with resolving powers from 3000 to 7000 and spatial sampling of 25~mas and 6~mas. It can operate in two adaptive optics modes - SCAO (including a high contrast capability) and MCAO. The project is resuming its final design phase after a rescope design phase in 2025. Diffraction of the pupil becomes significant in a spectrograph where the slit width is comparable to the diffraction limited PSF. When the spatial coherence due to the narrow slit is considered, the resulting line spread function can be narrower than the geometric width of the input slit, with a non-linear dependence on the size of the pupil aperture after the slit. We outline the impact of these diffraction and spatial filtering effects on the line spread function of HARMONI and identify parameters that should be considered when designing a diffraction limited spectrograph.

astro-ph.IM↗

arXiv2026

A 3D Reconstruction Benchmark for Asset Inspection

Asset management requires accurate 3D models to inform the maintenance, repair, and assessment of buildings, maritime vessels, and other key structures as they age. These downstream applications rely on high-fidelity models produced from aerial surveys in close proximity to the asset, enabling operators to locate and characterise deterioration or damage and plan repairs. Captured images typically have high overlap between adjacent camera poses, sufficient detail at millimetre scale, and challenging visual appearances such as reflections and transparency. However, existing 3D reconstruction datasets lack examples of these conditions, making it difficult to benchmark methods for this task. We present a new dataset with ground truth depth maps, camera poses, and mesh models of three synthetic scenes with simulated inspection trajectories and varying levels of surface condition on non-Lambertian scene content. We evaluate state-of-the-art reconstruction methods on this dataset. Our results demonstrate that current approaches struggle significantly with the dense capture trajectories and complex surface conditions inherent to this domain, exposing a critical scalability gap and pointing toward new research directions for deployable 3D reconstruction in asset inspection. Project page: https://roboticimaging.org/Projects/asset-inspection-dataset/

cs.CV↗

arXiv2026

Single-star optical turbulence profiling techniques for the SHIMM and other Shack-Hartmann instruments

Atmospheric optical turbulence (OT) monitoring is crucial for site characterisation at astronomical observatories and optical communications ground stations. The Shack-Hartmann Image Motion Monitor (SHIMM) instrument implements a fast, infrared Shack-Hartmann sensor to measure a low-resolution OT profile continuously throughout the day and night. This work presents advances made in Shack-Hartman optical turbulence profiling techniques implemented on the SHIMM, including the derivation and validation of Z-tilt weighting functions, implementation of methods for correcting for non-zero exposure times, and for estimating the coherence time of optical turbulence using the profile coupled with the Fast Defocus method. These techniques were tested via end-to-end Monte Carlo simulations of the SHIMM instrument. All measurements of integrated OT parameters were found to be in strong agreement with the simulation inputs evidenced by correlation coefficients close to one, small RMS error and bias. The accuracy of a four-layer model was also investigated, which showed high correlation with simulation inputs for all layers even in daytime OT conditions. This study suggests a Cn^2 sensitivity limit in the region of 2x10^-15 m^(1/3) and displays evidence of a cross-talk effect between the strong ground layer and first atmospheric layer.

astro-ph.IM↗

arXiv2024

Adapting CNNs for Fisheye Cameras without Retraining

The majority of image processing approaches assume images are in or can be rectified to a perspective projection. However, in many applications it is beneficial to use non conventional cameras, such as fisheye cameras, that have a larger field of view (FOV). The issue arises that these large-FOV images can't be rectified to a perspective projection without significant cropping of the original image. To address this issue we propose Rectified Convolutions (RectConv); a new approach for adapting pre-trained convolutional networks to operate with new non-perspective images, without any retraining. Replacing the convolutional layers of the network with RectConv layers allows the network to see both rectified patches and the entire FOV. We demonstrate RectConv adapting multiple pre-trained networks to perform segmentation and detection on fisheye imagery from two publicly available datasets. Our approach requires no additional data or training, and operates directly on the native image as captured from the camera. We believe this work is a step toward adapting the vast resources available for perspective images to operate across a broad range of camera geometries.

cs.CV↗

arXiv2024

A comparison of next-generation turbulence profiling instruments at Paranal

A six-night optical turbulence monitoring campaign has been carried at Cerro Paranal observatory in February and March, 2023 to facilitate the development and characterisation of two novel atmospheric site monitoring instruments - the ring-image next generation scintillation sensor (RINGSS) and 24-hour Shack Hartmann image motion monitor (24hSHIMM) in the context of providing optical turbulence monitoring support for upcoming 20-40m telescopes. Alongside these two instruments, the well-characterised Stereo-SCIDAR and 2016-MASS-DIMM were operated throughout the campaign to provide data for comparison. All instruments obtain estimates of optical turbulence profiles through statistical analysis of intensity and wavefront angle-of-arrival fluctuations from observations of stars. Contemporaneous measurements of the integrated turbulence parameters are compared and the ratios, bias, unbiased root mean square error and correlation of results from each instrument assessed. Strong agreement was observed in measurements of seeing, free atmosphere seeing and coherence time. Less correlation is seen for isoplanatic angle, although the median values agree well. Median turbulence parameters are further compared against long-term monitoring data from Paranal instruments. Profiles from the three small-telescope instruments are compared with the 100-layer profile from the stereo-SCIDAR. It is found that the RINGSS and SHIMM offer improved accuracy in characterisation of the vertical optical turbulence profile over the MASS-DIMM. Finally, the first results of continuous optical turbulence monitoring at Paranal are presented which show a strong diurnal variation and predictable trend in the seeing. A value of 2.65" is found for the median daytime seeing.

astro-ph.IM↗

arXiv2023

Demonstrating 24-hour continuous vertical monitoring of atmospheric optical turbulence

We report what is believed to be the first example of fully continuous, 24-hour vertical monitoring of atmospheric optical turbulence. This is achieved using a novel instrument, the 24-hour Shack-Hartmann Image Motion Monitor (24hSHIMM). Optical turbulence is a fundamental limitation for applications such as free-space optical communications, where it limits the achievable bandwidth, and ground-based optical astronomy, restricting the observational precision. Knowledge of the turbulence enables us to select the best sites, design optical instrumentation and optimise the operation of ground-based optical systems. The 24hSHIMM estimates the vertical optical turbulence coherence length, time, angle and Rytov variance from the measurement of a four-layer vertical turbulence profile and a wind speed profile retrieved from meteorological forecasts. To illustrate our advance we show the values of these parameters recorded during a 35-hour, continuous demonstration of the instrument. Due to its portability and ability to work in stronger turbulence, the 24hSHIMM can also operate in urban locations, providing the field with a truly continuous, versatile turbulence monitor for all but the most demanding of applications.

astro-ph.IM↗

arXiv2022

NOCaL: Calibration-Free Semi-Supervised Learning of Odometry and Camera Intrinsics

There are a multitude of emerging imaging technologies that could benefit robotics. However the need for bespoke models, calibration and low-level processing represents a key barrier to their adoption. In this work we present NOCaL, Neural odometry and Calibration using Light fields, a semi-supervised learning architecture capable of interpreting previously unseen cameras without calibration. NOCaL learns to estimate camera parameters, relative pose, and scene appearance. It employs a scene-rendering hypernetwork pretrained on a large number of existing cameras and scenes, and adapts to previously unseen cameras using a small supervised training set to enforce metric scale. We demonstrate NOCaL on rendered and captured imagery using conventional cameras, demonstrating calibration-free odometry and novel view synthesis. This work represents a key step toward automating the interpretation of general camera geometries and emerging imaging technologies.

cs.RO↗