arXiv subjects

Rustam Balafendiev

Publications and source records attributed to Rustam Balafendiev.

14 recordsLinked to original sources

arXiv2026

Millimeter and sub-millimeter characterization of polymers used for infrared filters in high-sensitivity cryogenic microwave telescopes

Vacuum windows and infrared filters are important transmissive optical components in millimeter receivers, as they hold out the atmosphere and reduce radiative loading on cold stages, thereby improving cryogenic performance. However, the complex optical properties of the materials commonly used for windows and filters are poorly characterized, particularly in-band and in the sub-millimeter regime. The absorption and scattering properties of these materials are becoming increasingly important for designing high-sensitivity millimeter instruments, as their loosely constrained properties are one of the greatest sources of uncertainty remaining in noise modeling. We report the absorption in the millimeter and sub-millimeter regime of nylon 6, nylon 6/6, PTFE and polyethylene (both bulk HDPE and foam HDPE used in radio transparent filter stacks). Additionally, we report the relative power scattered out of the main beam by these materials from 90 to 330 GHz, measured in free space by a robot-enabled scanning vector network analyzer.

astro-ph.IM↗

arXiv2026

Effects of manufacturing tolerances on the performance of metamaterial microwave anti-reflection coatings

Metamaterial anti-reflection coatings (ARC) are used in a variety of applications, including: lenses, filters, and absorbers. Typically, the design of a given ARC is done within an infinite medium approximation, which presupposes that every unit cell on the interface is identical. However, in realistic applications, the geometry of a given ARC usually has some degree of variability, be it due to the shape of the surface inherent to the application, like in a lens, or manufacturing tolerances. This variation may alter the performance of the optical element in unanticipated ways, by creating additional scattering, enabling diffractive maxima that would normally be absent and, most crucially, changing the transparency of the ARC as a function of frequency. In this work we utilize full-wave modeling of finite samples of plastic which are matched with free space using a metamaterial ARC on both of their interfaces. By adding a degree of randomness to the ARC geometry we attempt to characterize the extent to which a given variation affects the expected performance of an ARC.

astro-ph.IM↗

arXiv2026

Design of ALPHA Phase I: A Plasma Haloscope for 10--20 GHz Post-Inflation Axions

The axion is a well-motivated hypothetical particle capable of resolving both the strong CP problem and the dark matter mystery, with recent post-inflationary cosmological simulations favoring masses above 40 {\mu}eV. Plasma haloscopes serve as a promising experimental approach to reach theoretically preferred sensitivities in this mass range. ALPHA, hosted at Yale Wright Laboratory, is an international collaboration developing plasma haloscopes to search for QCD dark matter axions. In this letter we present the detailed design and sensitivity projection for the first phase of the ALPHA experiment, which will search the mass range from 10 GHz to 20 GHz (~40 {\mu}eV to 80 {\mu}eV). This search will make use of wire-array plasma resonators to decouple the physical size from the resonant frequency, a limitation typically faced by traditional microwave cavities, allowing broadband sensitivity approaching KSVZ coupling strengths.

hep-ex↗

arXiv2026

Polarization rotation through differential transmission in refractive CMB telescopes identified using a hybrid physical optics method

We identify a polarization rotation systematic in the far field beams of refractive cosmic microwave background (CMB) telescopes caused by differential transmission in anti-reflection (AR) coatings of optical elements. This systematic was identified following the development of a hybrid physical optics method that incorporates full-wave electromagnetic simulations of AR coatings to model the full polarization response of refractive systems. Applying this method to a two-lens CMB telescope with non-ideal AR coating, we show that polarization-dependent transmission can produce a rotation of the far-field polarization angle that varies across the focal plane with a typical amplitude of 0.05-0.5 degrees. If ignored in analysis, this effect can produce temperature to polarization leakage and Stokes Q/U mixing.

astro-ph.IM↗

arXiv2025

Optimizing broadband microwave absorbers for applications in the 70-200 GHz range

We present results of an extensive suite of numerical simulations that probe square-tiled microwave absorber performance as a function of material properties, frequency, geometry, and unit cell size. The work, which probes both specular reflection and total absorption, highlights the critical importance of the absorber scale size relative to the incidence wavelength while suggesting that material properties have a comparatively weaker impact on overall performance. We show that some absorber designs can achieve 99.5-99.9% frequency-averaged absorption across the 70 to 200 GHz range for normal incidence and that low specular reflectance does not necessarily guarantee optimal absorption performance. Our results indicate that exponential, Klopfenstein, and linear impedance tapers provide comparable performance as long as a unit cell size of 1 to 4 mm is chosen. Simulation results are validated against measurements of specular reflectance.

astro-ph.IM↗

arXiv2025

Spiral Tuning of Wire-metamaterial Cavity for Plasma Haloscope

Axions are hypothetical particles that provide a compelling solution to two major mysteries in modern physics: the strong CP problem and the nature of dark matter. The plasma haloscope has been proposed as a promising approach for probing the higher-mass regime for dark matter axions by employing a periodic arrangement of conducting wires. In this work, we introduce a novel tuning mechanism for such wire-based structures by arranging the wires into a spiral configuration. This design enables continuous frequency tuning of 25% with a single central rotation while maintaining the form factor. It also achieves scanning speeds several times faster than traditional tuning approaches, primarily due to the circular perimeter geometry, making it well suited for solenoidal magnet bores. To validate the concept, we fabricated a prototype cavity with six spiral arms and experimentally demonstrated its feasibility, obtaining frequency tuning in close agreement with numerical simulations.

hep-ex↗

arXiv2025

Tunable Epsilon Near Zero Metamaterial with Rotating Obround-Shaped Meta-Atoms

A new design of a microwave-range ENZ metamaterial consisting of rods with an obround cross-section is proposed. The plasma frequency of the metamaterial can be tuned by rotating the constituent meta-atoms. Tunability of the plasma frequency by 26% is demonstrated both experimentally and numerically. The observed tuning range is dramatically higher than in the one observed in natural materials at optical range.

physics.optics↗

arXiv2024

Uniform Field in Microwave Cavities Through the Use of Effective Magnetic Walls

Wire media (WM) resonators have emerged as promising realization for plasma haloscopes -- devices designed to detect axions, a potential component of dark matter. Key factors influencing the detection probability include cavity volume, resonance quality factor, and form factor. While the form factor has been explored for resonant frequency tuning, its optimization for axion detection remains unexplored. In this work, we present a novel approach to significantly enhance the form factor of WM plasma haloscopes. By shifting the metal walls of the resonator by a quarter wavelength, we effectively convert an electric wall boundary condition into a magnetic wall one, allowing for an almost uniform mode. Theoretical analysis and numerical simulations confirm that this modification improves the electric field profile and boosts the form factor. We validate these findings through experimental results from two prototype resonators: one with a standard geometry and another with a quarter-wave air gap between the WM and the walls. Additionally, our method provides a simple way to control the field profile within WM cavities, which can be explored for further applications.

physics.ins-det↗

arXiv2024

Anisotropy in a wire medium resulting from the rectangularity of a unit cell

The study is focused on the dispersion properties of a wire medium formed by a rectangular lattice of parallel wires at the frequencies close to its plasma frequency. While the effective medium theory predicts isotropic behaviour of transverse magnetic (TM) waves in the structure, numerical simulations reveal noticeable anisotropic properties. This anisotropy is dependent on the lattice rectangularity and reaches over 6% and over 75% along and across the wires respectively for thick wires with the radii about 20 times smaller than the smallest period. This conclusion is confirmed by line-of-current approximation theory. The revealed anisotropy effect is observed when the wavelength at the plasma frequency is comparable to the period of the structure. The effect vanishes in the case of extremely thin wires. A dispersion relation for TM waves in the vicinity of the $\Gamma$-point was obtained in a closed form. This provides an analytical description of the anisotropy effect.

physics.class-ph↗

arXiv2024

Reflectance measurements of mm-wave absorbers using frequency-domain continuous wave THz spectroscopy

Due to high dynamic range and ease of use, continuous wave terahertz spectroscopy is an increasingly popular method for optical characterization of components used in cosmic microwave background (CMB) experiments. In this work, we describe an optical testbed that enables simultaneous measurements of transmission and reflection properties of various radiation absorbing dielectric materials, essential components in the reduction of undesired optical loading. To demonstrate the performance of the testbed, we have measured the reflection response of five absorbers commonly used for such applications: TKRAM, carbon- and iron-loaded Stycast, HR10, AN72, and an in-house 3D printed absorber across a frequency range of 100 to 500 GHz, for both S- and P-polarization, with incident angles varying from 15 to 45 degrees. We present results on both the specular and scattered reflection response of these absorbers.

astro-ph.IM↗

arXiv2024

Vector beam mapping at millimeter wavelengths using a robot arm

Many experimental efforts are striving to provide deep maps of the cosmic microwave background (CMB) to shed light on key questions in modern cosmology. The primary science goal for some of these experiments is to further constrain the energy scale of cosmic inflation. It has been shown that these experiments are particularly sensitive to optical systematics. Near-field vector beam mapping, or holography, is now employed in a variety of CMB-focused experimental efforts due to the technique's ability to provide full details of electromagnetic field propagation through complex systems. In this proceeding, we describe the development of a measurement bench for millimeter-wave phase-sensitive beam mapping with the goal of characterizing optical components for CMB experiments. We discuss the testing of a beam scanner based on a 6-axis robot arm, the related custom control software, the readout architecture, and the overall validation of the system through various testing procedures. Dynamic range of 70 dB is demonstrated for the presented setup. With the current mechanical setup, we derive an upper limits of 45 $\mu$m on the absolute positioning error and 10 $\mu$m on positional repeatability.

astro-ph.IM↗

arXiv2023

Tunable Wire Metamaterials for an Axion Haloscope

Metamaterials based on regular two-dimensional arrays of thin wires have attracted renewed attention in light of a recently proposed strategy to search for dark matter axions. When placed in the external magnetic field, such metamaterials facilitate resonant conversion of axions into plasmons near their plasma frequency. Since the axion mass is not known a priori, a practical way to tune the plasma frequency of metamaterial is required. In this work, we have studied a system of two interpenetrating rectangular wire lattices where their relative position is varied. The plasma frequency as a function of their relative position in two dimensions has been mapped out experimentally, and compared with both a semi-analytic theory of wire-array metamaterials and numerical simulations. Theory and simulation yield essentially identical results, which in turn are in excellent agreement with experimental data. Over the range of translations studied, the plasma frequency can be tuned over a range of 16%.

hep-ex↗

arXiv2022

Searching For Dark Matter with Plasma Haloscopes

We summarise the recent progress of the Axion Longitudinal Plasma HAloscope (ALPHA) Consortium, a new experimental collaboration to build a plasma haloscope to search for axions and dark photons. The plasma haloscope is a novel method for the detection of the resonant conversion of light dark matter to photons. ALPHA will be sensitive to QCD axions over almost a decade of parameter space, potentially discovering dark matter and resolving the Strong CP problem. Unlike traditional cavity haloscopes, which are generally limited in volume by the Compton wavelength of the dark matter, plasma haloscopes use a wire metamaterial to create a tuneable artificial plasma frequency, decoupling the wavelength of light from the Compton wavelength and allowing for much stronger signals. We develop the theoretical foundations of plasma haloscopes and discuss recent experimental progress. Finally, we outline a baseline design for ALPHA and show that a full-scale experiment could discover QCD axions over almost a decade of parameter space.

hep-ph↗

arXiv2022

Wire metamaterial filled metallic resonators

In this work we study electromagnetic properties of a resonator recently suggested for the search of axions - a hypothetical candidate to explain dark matter. A wire medium loaded resonator (called a plasma haloscope when used to search for dark matter) consists of a box filled with a dense array of parallel wires electrically connected to top and bottom walls. We show that the homogenization model of wire medium works for this resonator without mesoscopic corrections, and that the resonator quality $Q$ at the frequency of our interest drops versus the growth of the resonator volume $V$ until it is dominated by resistive losses in the wires. We find that even at room temperature metals like copper can give quality factors in the thousands, an order of magnitude higher than originally assumed. Our theoretical results for both loaded and unloaded resonator quality factors were confirmed by building an experimental prototype. We discuss ways to further improve WM loaded resonators.

hep-ph↗