arXiv subjects

Runli Li

Publications and source records attributed to Runli Li.

5 recordsLinked to original sources

arXiv2026

Mitigating Electrode-Induced Polarization Artifacts in Miniaturized Terahertz Detectors via a Ring-Shaped Electrode Design

Terahertz (THz) polarization detection provides critical insights into material properties but faces a fundamental constraint upon miniaturization: subwavelength metallic electrodes induce strong localization and distortion of the incident field, thereby convoluting the intrinsic device response with electrode-induced artifacts. Here, we overcome this limitation with a ring-shaped electrode architecture that suppresses field perturbations across a broad bandwidth from 2.0 to 5.0 THz. The resonant frequency of the ring electrode can be flexibly detuned from the target operation frequency by adjusting its inner and outer radii, while the smooth, edge-free geometry minimizes the lightning-rod effect. These design features collectively lead to a pronounced suppression of localized THz field enhancement. Numerical simulations reveal an 8.48x reduction in the local field strength compared with conventional rod-shaped electrodes. Consistent with this, experimental measurements on graphene-based detectors exhibit a 6.95x decrease in photocurrent for the ring-shaped electrode relative to the rod-shaped configuration. Moreover, the ring geometry effectively reduces the linear polarization ratio of the photocurrent from >3 to <1.4, confirming its effectiveness in mitigating electrode-induced polarization anisotropy. Our design decouples the detection response from electrode-induced artifacts, enabling compact THz detectors that preserve intrinsic signal fidelity for high-quality polarization-resolved imaging and diagnostics.

physics.optics↗

arXiv2026

Deep-Subwavelength Plasmon Polariton Atomic Cavity Detector for Frequency- and Polarization-Sensitive Terahertz Detection and Imaging

Room-temperature, miniaturized, polarization-resolved terahertz (THz) detection of high speed is vital for high-resolution imaging in radar, remote sensing, and semiconductor inspection, and is essential for large-scale THz focal plane arrays. However, miniaturization below deep-subwavelength scales (< 1/50 wavelength) remain challenging due to weak light-matter interaction, which degrades responsivity and polarization sensitivity. Here, we present a graphene plasmon polariton atomic cavity (PPAC) monolithic detector that overcomes this limitation by maintaining and even enhancing performance at a deep-subwavelength channel length of just 2 micrometers (1/60 wavelength). The device integrates graphene rectangle PPAC arrays with dissimilar metal contacts, where graphene functions as both absorber and conductor, simplifying the architecture. Exploiting plasmon polariton resonances and the photothermoelectric (PTE) effect, the detector achieves polarization-sensitive, frequency-selective, and fast THz detection spanning 0.53 to 4.24 THz with a polarization ratio of 93, featuring a responsivity (RV) of 1007 V/W, a noise-equivalent power (NEP) of 16 pW/Hz^0.5, a specific detectivity (D*) of 2.9 x 10^7 Jones, and a response time of 230 ps. We further demonstrate monolithic integration for polarization imaging and non-destructive semiconductor chip inspection, advancing room-temperature, compact, and polarization-sensitive THz technologies.

physics.optics↗

arXiv2025

A two-dimensional terahertz smart wristband for integrated sensing and communication

The development of wearable devices for terahertz (THz) integrated sensing and communication (ISAC) is pivotal for forthcoming 6G Internet of Things (IoT) and wearable optoelectronics. However, existing THz system suffers from bulkiness, narrow spectral response and limited flexibility constrained by their dependence on external antennas, complex coupling architectures and rigid components. Here, we present a 2D THz smart wristband based on a graphene plasmon polariton atomic cavity (PPAC) array, which integrates sensing and communication within a monolithic microdetector. Operating without any external antenna, the compact and flexible device enables self-powered, polarization-sensitive and frequency-selective THz detection across a broad response spectrum from 0.25 to 4.24 THz, with a responsivity of 6 V/W, a response time of 62 ms, and mechanical robustness maintained over 2000 bending cycles. Notably, we further exploit its multi-parameter THz responses for dual-purpose ISAC functionality. For sensing, the polarization- and strain-dependent THz responses are utilized as high-dimensional features for a convolutional neural network (CNN), enabling circuit fault diagnosis with 97% accuracy. For communication, the device implements secure encrypted communication under simulated on-body wearing condition through dual-channel encoding of THz polarization and on-off signals. This 2D ISAC platform paves the way for miniaturized, intelligent wearable systems for advanced human-machine interaction.

physics.optics↗

arXiv2025

Coherent Absorption Synergizes with Plasmon-Enhanced Graphene Terahertz Photo-thermoelectric Response

Terahertz (THz) technology shows great potential in 6G communications and imaging, but faces challenges related to detector sensitivity, noise, and cryogenic operation. Here, we integrate interferometric enhancement of absorption (IEA) from a metal reflection layer with a graphene plasmon polariton atomic cavity (PPAC)-based photodetector. The hybrid configuration enhances the in-plane electric field and improves the plasmon-induced thermal gradient. Numerical simulations and photoresponse measurements were employed to systematically investigate the influence of a metal reflective layer on the photothermoelectric behavior of the device, which reveals the IEA design significantly boosts the THz absorption rate in graphene nanostructures and promotes asymmetry in the lateral diffusion of hot carriers. Compared with the bare device, the responsivity of the device is enhanced by approximately 30-folds, while maintaining a response time below 130 microseconds. We further demonstrate the potential of the device to distinguish concealed liquids, advancing high-responsivity, room-temperature, and compact terahertz imaging technology.

cond-mat.mes-hall↗

arXiv2025

Deep Learning Empowered Sub-Diffraction Terahertz Backpropagation Single-Pixel Imaging

Terahertz single-pixel imaging (THz SPI) has garnered widespread attention for its potential to overcome challenges associated with THz focal plane arrays. However, the inherently long wavelength of THz waves limits imaging resolution, while achieving subwavelength resolution requires harsh experimental conditions and time-consuming processes. Here, we propose a sub-diffraction THz backpropagation SPI technique. We illuminate the object with continuous-wave 0.36-THz radiation ({\lambda}0 = 833.3 {\mu}m). The transmitted THz wave is modulated by prearranged patterns generated on a 500-{\mu}m-thick silicon wafer and subsequently recorded by a far-field single-pixel detector. An untrained neural network constrained with the physical SPI process iteratively reconstructs the THz images with an ultralow sampling ratio of 1.5625%, significantly reducing the long sampling times. To further suppress the THz diffraction-field effects, a backpropagation SPI from near field to far field is implemented by integrating with a THz physical propagation model into the output layer of the network. Notably, using the thick wafer where THz evanescent field cannot be fully recorded, we achieve a spatial resolution of 118 {\mu}m (~{\lambda}0/7) through backpropagation SPI, thus eliminating the need for ultrathin photomodulators. This approach provides an efficient solution for advancing THz microscopic imaging and addressing other inverse imaging challenges.

eess.IV↗