arXiv ScienceSearch

arXiv subjects

Ruixin Guo

Publications and source records attributed to Ruixin Guo.

11 recordsLinked to original sources

PLUME: Parameter-Efficient Personalization of Large Language Models via Low-Rank User Modulation in Shared Subspaces

Personalizing large language models (LLMs) is essential for delivering AI assistance that aligns with individual users' styles, intents, and preferences. While per-user fine-tuning can substantially enhance personalization quality, it introduces significant parameter and storage overhead, limiting scalability to large user populations. We propose PLUME (Personalized Low-Rank Adaptation through User Modulation and Shared Subspace), a lightweight framework that achieves efficient and expressive per-user adaptation by leveraging a shared task-specific subspace. Specifically, PLUME first learns a global task subspace from aggregated user data. Personalization is then achieved by training only a lightweight small square matrix within this subspace, enabling each user to obtain a tailored model while keeping shared components fixed. Cross-layer shared parameters and rank-1 residual terms are further introduced to significantly reduce redundancy while maintaining expressiveness. Experiments on multiple personalized text generation benchmarks demonstrate that PLUME achieves comparable or superior performance to strong baselines, while reducing per-user parameters by over 95%. These results establish shared-subspace modulation with minimal residuals as a scalable and semantically grounded approach to LLM personalization.

cs.AI

Aplaud: Adaptive Personalized Low-Rank Decomposition for User-Specific LLM

In this paper, we study the problem of personalized survey response prediction using fine-tuned large language models (LLMs). This task poses unique challenges: limited per-user training data, scalability of model storage, and the need to exploit shared structure across survey questions. To address these issues, we propose Aplaud (Adaptive Personalized Low-rank and User-specific Nested Decomposition), a lightweight and scalable framework for LLM personalization. Aplaud extends the LoRA paradigm by separating adaptation into a frozen, shared low-rank basis and a compact user-specific correction, augmented with a rank-one residual for finer personalization. To further reduce per-user parameter cost and mitigate overfitting, the correction matrix can be factorized into an even lower-rank form. Empirical results demonstrate that Aplaud achieves efficient, scalable personalization across users while outperforming state-of-the-art LoRA-based personalized LLM approaches in both generalization and inference efficiency.

cs.AI

Generalizing Linear Autoencoder Recommenders with Decoupled Expected Quadratic Loss

Linear autoencoders (LAEs) have gained increasing popularity in recommender systems due to their simplicity and strong empirical performance. Most LAE models, including the Emphasized Denoising Linear Autoencoder (EDLAE) introduced by (Steck, 2020), use quadratic loss during training. However, the original EDLAE only provides closed-form solutions for the hyperparameter choice $b = 0$, which limits its capacity. In this work, we generalize EDLAE objective into a Decoupled Expected Quadratic Loss (DEQL). We show that DEQL simplifies the process of deriving EDLAE solutions and reveals solutions in a broader hyperparameter range $b > 0$, which were not derived in Steck's original paper. Additionally, we propose an efficient algorithm based on Miller's matrix inverse theorem to ensure the computational tractability for the $b > 0$ case. Empirical results on benchmark datasets show that the $b > 0$ solutions provided by DEQL outperform the $b = 0$ EDLAE baseline, demonstrating that DEQL expands the solution space and enables the discovery of models with better testing performance.

cs.LG

PAC-Bayes Bounds for Multivariate Linear Regression and Linear Autoencoders

Linear Autoencoders (LAEs) have shown strong performance in state-of-the-art recommender systems. However, this success remains largely empirical, with limited theoretical understanding. In this paper, we investigate the generalizability -- a theoretical measure of model performance in statistical learning -- of multivariate linear regression and LAEs. We first propose a PAC-Bayes bound for multivariate linear regression, extending the earlier bound for single-output linear regression by Shalaeva et al., and establish sufficient conditions for its convergence. We then show that LAEs, when evaluated under a relaxed mean squared error, can be interpreted as constrained multivariate linear regression models on bounded data, to which our bound adapts. Furthermore, we develop theoretical methods to improve the computational efficiency of optimizing the LAE bound, enabling its practical evaluation on large models and real-world datasets. Experimental results demonstrate that our bound is tight and correlates well with practical ranking metrics such as Recall@K and NDCG@K.

stat.ML

Quantum Fluctuation-enhanced Milli-Kelvin Magnetic Refrigeration in Triangular Lattice Magnet GdBO3

Rare-earth-based triangular lattice antiferromagnets, with strong quantum fluctuations and weak magnetic interactions, can often retain large magnetic entropy down to very low temperatures, making them excellent candidates for magnetic refrigeration at ultra-low temperatures. These materials exhibit a substantial magnetocaloric effect (MCE) due to enhanced spin fluctuations, particularly near quantum critical points, which leads to significant changes in magnetic entropy. This study reports on the crystal growth, structure, magnetism, and MCE of a Gd-based triangular lattice material, GdBO3, characterized by a large spin quantum number (S = 7/2). Successive phase transitions (T1 = 0.52 K, T2 = 0.88 K, and T3 = 1.77 K) were observed in zero-field specific heat measurements. Furthermore, thermal dynamic analysis under external magnetic fields identified five distinct phase regions and three quantum critical points for GdBO3. Due to its broad specific heat features and the high density of magnetic Gd3+ ions, we achieved a minimum temperature of 50 mK near the field-induced quantum critical point, using a custom-designed GdBO3-based adiabatic demagnetization refrigerator. Our findings reveal significant quantum fluctuations below 2 K, demonstrating GdBO3's potential for milli-Kelvin magnetic cooling applications.

cond-mat.str-el

Superconductivity of the New Medium-Entropy Alloy V4Ti2W with a Body-Centered Cubic Structure

Medium- and high-entropy alloy (MEA and HEA) superconductors have attracted considerable interest since their discovery. This paper reports the superconducting properties of ternary tungsten-containing MEA V4Ti2W for the first time. V4Ti2W is a type II superconductor with a body-centered cubic (BCC) structure. Experimental results of resistivity, magnetization, and heat capacity indicate that the superconducting transition temperature of the MEA V4Ti2W is roughly 5.0 K. The critical magnetic fields at the upper and lower ends are 9.93(2) T and 40.7(3) mT, respectively. Interestingly, few BCC MEA superconductors with VEC greater than 4.8 have been found. The addition of tungsten leads to a VEC of 4.83 e/a for V4Ti2W, which is rarely higher than the 4.8 value. Adding tungsten element expands the variety of MEA alloys, which may improve the microstructure and mechanical properties of materials and even superconducting properties. This material could potentially offer a new platform for the investigation of innovative MEA and HEA superconductors.

cond-mat.supr-con

Superconductivity in the high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx with possible nontrivial band topology

Topological superconductors have drawn significant interest from the scientific community due to the accompanying Majorana fermions. Here, we report the discovery of electronic structure and superconductivity in high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx (x = 1 and 0.8) combined with experiments and first-principles calculations. The Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx high-entropy ceramics show bulk type-II superconductivity with Tc about 4.00 K (x = 1) and 2.65 K (x = 0.8), respectively. The specific heat jump is equal to 1.45 (x = 1) and 1.52 (x = 0.8), close to the expected value of 1.43 for the BCS superconductor in the weak coupling limit. The high-pressure resistance measurements show that a robust superconductivity against high physical pressure in Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2C, with a slight Tc variation of 0.3 K within 82.5 GPa. Furthermore, the first-principles calculations indicate that the Dirac-like point exists in the electronic band structures of Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2C, which is potentially a topological superconductor. The Dirac-like point is mainly contributed by the d orbitals of transition metals M and the p orbitals of C. The high-entropy ceramics provide an excellent platform for the fabrication of novel quantum devices, and our study may spark significant future physics investigations in this intriguing material.

cond-mat.supr-con

Superconductivity in the cobalt-doped V3Si A15 intermetallic compound

The A15 structure of superconductors is a prototypical type-II superconductor that has generated considerable interest since the early history of superconducting materials. This paper discusses the superconducting properties of previously unreported V3-xCoxSi alloys. It is found that the lattice parameter decreases with increasing cobalt-doped content and leads to an increased residual resistivity ratio (RRR) value of the V3-xCoxSi system. Meanwhile, the superconducting transition temperature (Tc) cobalt-doped content. Furthermore, the fitted data show that the increase of cobalt-doped content also reduces the lower/upper critical fields of the V3-xCoxSi system. Type-II superconductivity is demonstrated on all V3-xCoxSi samples. With higher Co-doped content, V3-xCoxSi alloys may have superconducting and structural phase transitions at low-temperature regions. As the electron/atom (e/a) ratio increases, the Tc variation trend of V3Si is as pronounced as in crystalline alloys and monotonically follows the trend observed for amorphous superconductors.

cond-mat.supr-con

Magnetic phase transitions in the triangular-lattice spin-1 dimer compound K2Ni2(SeO3)3

In our study, we conduct magnetization and heat capacity measurements to investigate field induced magnetic phase transitions within the newly synthesized compound K2Ni2(SeO3)3, a spin-1 dimer system arranged on a triangular lattice. From our first-principles simulations, we determine that the spin system in K2Ni2(SeO3)3 can be represented as a two-dimensional triangular-lattice spin-1 dimer model, including an intra-dimer exchange of J1 = 0.32 meV, an inter-dimer exchange of J2 = 0.79 meV, and an easy-axis anisotropy of D = 0.14 meV. The presence of easy-axis magnetic anisotropy explains the distinct magnetic phase diagrams observed under c-axis directional and in-plane magnetic fields. Notably, our investigation unveils a two-step phase transition with the magnetic field aligned with the c direction. Our findings yield valuable insights into the magnetic phase transitions inherent to geometrically frustrated magnetic systems featuring dimer structures.

cond-mat.str-el

Superconductivity in the medium-entropy alloy TiVNbTa with a body-centered cubic structure

Here we report the TiVNbTa medium-entropy alloy (MEA) superconductor with the mixed 3d - 5d elements synthesized by an arc-melting method. The TiVNbTa material has a body-centered cubic structure. The superconducting properties of TiVNbTa were studied by resistivity, magnetic susceptibility, and specific heat measurements. The experimental results show that the bulk superconducting phase transition temperature of TiVNbTa is about 4.65 K, and the upper and lower critical fields are 49.3(4) mT and 5.9(5) T, respectively, which indicates TiVNbTa is a type-II superconductor. First-principles calculations show that the d electrons of Ti, V, Nb, and Ta atoms play a significant role near the Fermi level. The results show TiVNbTa is a traditional s-wave superconductor.

cond-mat.supr-con

Discovery of the high-entropy carbide ceramic topological superconductor candidate (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C

High-entropy ceramics (HECs) are solid solutions of inorganic compounds with one or more Wyckoff sites shared by equal or near-equal atomic ratios of multi-principal elements. Material design and property tailoring possibilities emerge from this new class of materials. Here, we report the discovery of superconductivity around 2.35 K and topological properties in the (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C high-entropy carbide ceramic (HECC), which has not been observed before in any of the investigated HECC. Density functional theory calculations showed that six type-II Dirac points exist in (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)C, which mainly contributed from the t2g orbitals of transition metals and the p orbitals of C. Due to the stability of the structure, we also observed robust superconductivity under pressure in this HEC superconductor. This study expands the physical properties of HECs, which may become a new material platform for superconductivity research, especially for studying the coupling between superconductivity and topological physics.

cond-mat.supr-con